CERTAIN REPAIRS TO FLOOR, INTERNAL WATER SUPPLY SYSTEMS, SANITARY ITEMS JOINERY AND ALLIED WORKS IN DOMESTIC AND TECH AREA OF AFAC COIMBATORE

Amount

Taking down chowkhats or frames with out taking off the shutters from the frames not exc 1.50 sqm each and stacking for issuing under credit all as specified and directed

Taking down chowkhats or frames with out taking off the shutters from the frames exc 1.50 sqm and not exc 4.00 sqm each and stacking for issuing under credit all as specified and directed

Taking down shutters of any description exc 1.00 sqm and n exc 2 sqm each and stacking for issuing under credit all as specified and directed

S & F Second class hard wood plain solid chowkhats and frames wrought framed rebated on the solid, rounded or chamferred, put together with glue pinned at joints, all as specified and directed.

S & F Factory made second class hard wood plain framed paneled shutters 35 mm thick (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of the rail and style shall be as per IS 1003 (Part I) kiln seasoned and chemically pressure treated all as specified and directed

M & L Second class hard wood Glazed and skeleton shutters 30 mm thick open rebated and prepared to receive glass, guaze etc. (without sash bars) edges of framing plain chamferred or rounded fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I kiln seasoned and chemically pressure treated all as specified and directed

Supply and fix Solid PVC door frames size 50mmx 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube, fixed to openings all as specified and directed

M&L for Factory made solid panel PVC door shutter 30mm thick (styles) consisting of frames made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain color PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail, lock rail &bottom rail on either side& as gap insert for top rail and bottom rail; Paneling of plain color PVC sheet to be fitted in the MS frame welded /sealed to the stiles &rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing all as specified and directed

S&F Floor Door Stopper of Aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors 140 mm complete all as specified.

S & F Butt hinges medium weight cold rolled mild steel, and fixed 100 mm size all as specified and directed

S & F Aluminium anodised barrel tower bolts extruded section 150 mm size all as specified and directed

S & F Extruded aluminium alloy handles fabricated type anodised size 150 mm all as specified and directed

S & F Aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 300mm long all as specified and directed

Supply and fix in stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

Preparation of new wood or wood based surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

M &L in repairs stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including repairs.

Preparation of old steel surface over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specifiedand as directed.

S&F fancy type 19/20mm curtain rod ( Drapery rod) MS tubing with PVC colour coating and two No colour PVC finials ( Latto) with brackets and min 8 to 10 Nos PVC curtain hooks complete fixing arrangements complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames of stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed

S&F Sheet glass,4.00 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane .

S&F Figured glass, pin head type, 4mm thick and glazing with oil putty in square n.exc 0.5 sqm in each pane all as specified and as directed.

M&L in repairs for 18/19 mm thick prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed.

S&F 75 mm size extruded aluminium alloy handles fabricated type anodised all as specified and directed

S&F continuous (piano) hinges mild steel bright finish or electrogalvanised 30 mm wide(width of flab(when open) all as specified and directed

S&F Ball catches with 8 mm dia steel ball and brass body and striking plate including letting in all as specified and as directed.

Dismantling floors, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed by Engineer-in- Charge.

M&L for Non skid ceramic coloured tiles 8 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15mm thick rendering in CM 1:6 complete all as specified and as directed by Engineer-in- Charge.

M&L for glazed ceramic coloured tiles 7 to 8 mm thick on vertical surfaces 350 x 250mm / 450 x 350mm, etc set and jointed in neat cement slurry and pointed in white or coloured cement over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed by Engineer In-Charge.

Taking up or down steel tubing and connections, and removing to store for taking in account of credit for 15mm bore all and as directed.

All as per item No.30 above, but for 20 mm bore

S&F 16 mm dia 3- layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN 16) UV stablized and antimicobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed to walls, ceiling or in floors etc complete all as specified and directed.

All as per item No.32 above, but for 20 mm bore

S&F steel tubing medium grade with all fitting and fixtures complete to walls and or laid in floors 15mm bore all as specified and as directed.

All as per item No.34 above, but for 20 mm bore

Taking down old PVC (SWR) pipes fixed on walls and removing to store for taking in account of credit for 75 /110 mm dia complete.

S&F PVC floor trap only of size 75 mm including taking down old CI floor traps with waste pipes of length approximately 3.20 meter embedded in concrete and making good the disturbed portion with PCC 1:2:4 B4 all as specified and as directed by Engineer In-Charge.

M&L for Sunken floor treatment by providing injection pressure grouting treatment using cement slurry mixed with grout admixtures non shrink additive using 40 PSI pump complete and applying two coats of brush bond acrylic polymer modified cement based coating thickness 1mm or two coats of acrylic polymer water proof coating including necessary surface preparation, providing 20 mm thick water proofing screed bed/plaster in CM 1:4 mixed with water proofing compound per bag of cement as per manufacturers instructions. Two coats of bitumen based water proofing coating shall be provieded over plastered surface as per specification of chemical resistant coating complete all as directed by Engineer-in-Charge.

M&L for cement concrete 1:7:12 using brick aggregate of size 40 to 60mm as in sunken portion all as directed.

S&F PVC (SWR)110mm bore pipes single socketed in any length with rubber ring joints laid fixed to walls

All as per item No.40 above, but for 75 mm bore

S&F PVC (SWR) bends any radius 110 mm bore

S&F PVC (SWR) bends any radius 75 mm bore

S&F PVC (SWR) ,single (Double Y) equal or unequal 110 mm bore

S&F PVC (SWR) ,single (single Y) equal or unequal 110 mm bore

S&F PVC (SWR) ,single (Double Y) equal or unequal 75 mm bore

S&F PVC (SWR) ,single (single Y) equal or unequal 75 mm bore

Supply and fix vitreous china wash down water closet pan (pedestal pattern), excluding flushing cistern and flush pipe), including fixing to existing 125/110mm size PVC (SWR) P trap etc complete all as specified and as directed.

Supply and fix in repairs plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated hinging device all as specified and as directed.

S&F in repairs Bib taps, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore all as directed.

Supply and fix in repairs 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe all as specified and as directed.

S&F in repairs chromium plated angle valves, cast copper alloy, screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed. 15 mm size.

Supply and fix in repairs low level PVC flushing cistern white complete with syphonic action type 10 litre capacity including float valve handle, bracket, PVC flush down pipe 32mm dia as required with bend, PVC connection 450mm long with PTMT nut and washers etc complete all as specified and as directed.

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe)

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm

S&F in repairs Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws.

S& F in repairs Viterous china wash hand basin white flat back size 450 x 300 mm excluding taps, chain and plug and porcelain stopper but including brackets, waste fittings of 32 mm waste pipe etc all as specified

Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed. Make: Parryware slimeline of Cat No. T9940A1 or equivalent in Jaguar/Hindware//Zolotto

S&F, in repair vitreous china wash down water closet of "Orissa" pattern size 580 x 440mm white with integral foot rests including connection to trap and to flushing pipe anti syphonage pipe etc complete and making good to floor.

S&F grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gms)

Taking down cement plaster on brick or stone walls, ceilings, roof slab etc including racking out Joints, hacking for key, scrubbing down with water, etc

M&L for Rendering 20mm thick in two layer of 10mm each on fair faces of concrete surfaces in CM 1:4 mixing with integral water proofing compound (WPC) @ of 3% of cement and finished even and smooth (without using extra cement) over cleaned, brushed by wire brush and washed by water etc complete all as specified and as directed. Note :- WPC will be measured and paid separately as supply only.

Supply only water proofing compound

M & L for 10mm thick rendering in cement mortat 1:4 on fair faces or brick work or concrete surfaces , rendered surfaces is to be finished even and smooth without using extra cement.

M & L for 10mm thick cement plastering with cement mortar 1:4 brick or concrete surfaces of ceiling finished fair and even complete all as specified and directed.

Preparation of newly plastered or unplastered surfaces of walls and applying two coat of white wash on ceiling all as specified.

Preparation of newly plastered or unplastered surfaces of walls and applying two coat of white wash on wall all as specified.

Removing building material out side the campus including loading and unloading, etc to distance exc 5.0 km but not exc 10.0 km out side the M.D land (Ministry of Defence land) all as specified. Note : Location and permission of depositing the builing materials/disposal out side the M.D. land shall rest with contractor at his own arrangement.

S& F in repairs PVC waste pipe 32mm bore for ,WHB,and Sink all as specified and directed.

Supply and fixing in position 500mm deep wooden cabinets (Without drawer) of required size made of 19mm thick BWP one side laminated plywood of approved make , partion, shelves, shutters as per site requirement.12mm thick BWP ply in 6mm thick BWP ply of approved make at back of cabinet as directed. supply and fixing of 1mm thick laminate of approved make and shade on shutters & exposed sides of cabinates whereever required , back side of cabinet shall be finished in two or more coat of of synthetic enamel paint of approved make and colour including wooden lipping, suitable locking arrangements,all type of screws, fasteners, piano hinges, wooden screws, adhesives, polishing and painting of lipping, magnetic catchers, tower bolt, door handles \knobs as approved and all other types of necessay fittings etc complete all as directed and as per site condition. Note:- Only front elevation area shall be measured in sqm for payment including dismantling of old cubboard complete all as speicified and directed.

Supply and fixing factory made UPVC white colour Two track two panels sliding glazed window upto 1.50m height made of small series) frame 52x44 mm & sash 32x60 mm both having wall thickness of 1.9+- 0.2 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of UPVC multichambered frame,inbuilt roller track and sash extruded profiles dully reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension,EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated)touch locks with hook, zink alloy body with nylon rollers (weight bearing capacity to be 40 kg 0 GI fasteners 100x8mm size for fixing frame to finished wall and necessay stainless steel screws, etc . Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass , wiremesh shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S & F for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. Make : Indal co / Hindal Co / Jindal

M & L for Anodised aluminium door shutters aluminium section weighing 0.55 kg/ m including necessary joining cleats glazing clips, ruber neoprene packing. handles 2 Nos in each door, hinges anodised aluminum snap beading screws etc. complete all as specified.

M & L for 12mm thick veneered particle boards exterior grade solid core,as in partition/general purpose type with face with decorative vineers both side fixed aluminium beading with screw etc all as specified and as directed.

M & L for Sheet glass 5.50mm thick , ordinary quality and glazing with aluminium beading in square exc 0.5 sq.m in each pane including necessary joining cleats, glazing clips, rubber neoprene packing etc all as specified and as directed.

M & L Anodised aluminium window and ventilator shutters, side hung type without sash bars, almuiniunlsections weighing 0.55 kg including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S &F for 12mm thick pre-fromed filler for expansion joints

p.chinnasamy

joepowercorporation

SARASWATHI CONSTRUCTION

CAK Enterprises

P JAYAPATHY & C0

UNIQUE INDIA CONSTRUCTIONS

SEMBA ELECTRICALS