SPECIAL REPAIRS TO BLDG NO ENP 01 AND ET 71 OF ASC CENTRE AND COLLEGE UNDER GE CENTRAL BANGALORE

Amount

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) as in plinth protection/ hard standing/ floors/ path etc complete all as directed.

Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water, etc complete all as directed.

Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought upto courses in cement or cement lime mortar complete all as directed.

Taking down chowkhat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 Sqm each complete all as directed.

Taking down chowkhats or frames with shutter (without taking off shutters from the frame) not exc 1.5 sqm each complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

Dismantling Asbestos Cement sheets Corrugated or Semicorrugated in Roof covering complete all as directed.

Dismantling boarding any description fixed in any position with nails complete all as directed.

Dismantling unframed timber scantling 40 sq cm and over in section in any position complete all as directed.

Dismantling of battens for tiles, shingles etc, of any size including tilting fillets complete all as directed.

M & L for hardcore of broken stone or boulders of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as directed.

M&L for 75 mm thick, PCC 1:3:6 type C2 finished even and smooth without using extra cement.as in plinth protection incl joint filling complete all as directed.

M & L for 75mm thick PCC 1:4:8 type D2 75 mm thick as in sub base of foot path, floors etc complete all as directed.

M & L for 40mm thick PCC 1:2:4 type B-1 using 20mm crushed stone aggregate as in floor finishing the concrete surface even and smooth without using extra cement complete all as directed.

M&L for precast cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in block masonry with solid blocks, exc 10 cm in width and set in cement mortar 1:4 complete all as directed.

M&L for rendering 20 mm thick cement mortar 1:4 surface on stone masonry surfaces or surface other than fair faces of brick work finishing the surface even and smooth without using extra complete all as directed.

M&L for rendering 20 mm thick cement mortar on stone masonry surfaces or 1:6 surface other than fair faces of brick work finishing the surface even and smooth without using extra cement surfaces complete all as directed.

M&L for rendering 15 mm thick cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement complete all as directed.

M&L for rendering 5 mm thick cement mortar 1:3 on ceiling surfaces finishing the surface even and smooth without using extra cement complete all as directed.

M & L for rendering 15 mm thick cement mortar 1:4 in two layers (10mm and 5mm thick) on fair faces of brick work or concrete surfaces, mixed with integral water proofing compound in the top 5mm thick layer by weight of cement as per manufacturer's instructions and finishing the surface even and smooth without using extra cement complete all as directed. (Note : WPC shall be measured and paid separately against respective item supply only).

S&F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.,complete all as directed.

S&F 30 mm flush door shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as directed.

S&F Box type Steel Windows/Ventilators double side shutters (Windows side hung type , Ventilators top hung) pressed steel frames made out CRC Sheet of 80x60x1.25mm double rebated, Shutters box type made out of CRC Sheet of 40x20x1.0mm , windows & ventilator shutter fixed made of glass and gauge fixed with box type hinges, Aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, Telescopic stays, etc complete all as specified incl 12mm square guard bars/grill welded with steel frame (100c/c horizontically) all as specified and directed NOTE: (i) Payment under this item will be made combined for steel frames, steel shutters and Guard bard/Grill, However unit rate quoted shall deemed to include cost of beading, fittings such as handles, hinges,Telescopic stays, locking arrangements and fixing of glass and wiremesh etc. (ii) Supply only 4 mm thick sheet glass and stainless steel wire mesh be measured and paid separately. (iii) Weight of Grill/Guard Bars, handle,hinges and locking arrangements shall not be accounted for payment purpose . (Note : All Windows/Vent design as per CECZ TD drg No 539)

S&F 2nd class hard wood glazed and skeleton shutters, 35mm thick, open rebated & prepared to receive wire gauge (with sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24- (a), supplied and fitted to chowkhats complete all as directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube complete all as directed.

S&F factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as directed.

S&F Butt hinges 100mm mild steel cold rolled, medium weight complete all as directed.

S&F 150mm long aluminium anodized, barrel tower bolts of extruded section complete all as directed.

S&F 100mm long aluminium anodized handles of extruded section, fabricated type complete all as directed.

S&F 300mm aluminium alloy, anodized, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed.

Supply only 4mm thick sheet glass ordinary quality and glazing with oil putty in square/rectangular n.exc 0.50 sqm in each pane complete all as directed.

S&F Mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for door frame, support or stay for rain water pipe etc and other similar small items conforming to Fe-410-0 or Fe-310-0complete all as directed.

M & L for Cement concrete 1:2:4, type B1 (using 20mm graded stone aggregates) as in coping & similar bands,plinth courses, string courses, lacing courses, parapets bed plates, holdfast, drain etc complete all as directed.

Cutting holes in stone/brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1;2:4 type B1 exceeding half brick but not exceeding one brick complete all as directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over 15 mm thick screed bed in CM 1:6 complete all as directed.

Glazed ceramic coloured tiles 350x250x7mm/ 450x350x7mm thick on vertical surfaces such as dados and risers to step etc, set and jointed in neat cement slurry and pointed in coloured cement to match the tiles over 10mm thick rendering in CM 1:4 complete all as directed.

Taking up or down steel tubing for 15mm dia pipe and connections including cleaning for re-fixing or removal to store complete all as directed.

Supply and laying of 16 mm outer dia CPVC Pipe (ISI Marked) SDR 11 & plain CPVC SDR II fittings fixed on wall, celing or floors complete all as directed.

Taking up or down steel tubing for 20mm dia pipe and connections including cleaning for re-fixing or removal to store complete all as directed.

Supply and laying of 20mm outer dia CPVC Pipe (ISI Marked) fixed complete to wall, celing or floors including taking up or down 15mm bore steel tubing complete all as directed.

Supply and fixing in repairs wash hand basin vitreous China (flat back or angle back type) 550x400mm size including cutting for and pinning in ends of bracket or eracting stand including CI bracket and waste fitting (CP) and PVC waste pipe complete all as directed.

Supply and fixing in repairs pillar tap cast copper alloy with Capston Head CP screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nut screwed for Iron pipe and fixed 15mm dia complete all as directed.

S&F in repairs vitreous China wash down water closet Orrissa pattern , white (excluding flushing cistern and flush pipe) with connection to drain or out going pipe and flushing pipe complete all as directed.

S&F in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, with PVC connection pipe of 15mm x 600mm long etc complete all as directed.

Supply and fixing in repair 15mm dia bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for Iron Pipe or brass ferrule and fixed complete all as directed.

Supply and fixing in repair Angle valve cast copper alloy cromium Plated (CP) 15mm dia screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for unions and fixed complete all as directed.

S&F in repairs Brass chromium plated tubular towel rail, 20mm dia ‘D’ type, 60CM long between flanges complete all as directed.

S&F in repairs 15mm dia 600mm long PVC connection with PTMT nuts with washer complete all as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specificaly provided for ( reinforcement cut as required to facilitate demolition) complete all as directed.

S&F rotational moulded polyethylene water storage tanks of capacity of tanks 500 Ltrs (cylindrical vertical closed top ) hoisted and fixed in position all as specified in SSR Part –I complete all as directed.

M&L for PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc in repairs complete all as directed.

S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as directed.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc complete all as directed.

S&F PVC (SWR) bends 110mm dia any radius complete all as directed.

S&F PVC (SWR) bends 75 mm dia any radius complete all as directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white on walls incl preparation of surfaces complete all as directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white washing on ceiling complete all as directed.

M & L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces complete all as directed.

M&L for complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as directed.

M&L for preparation of new surface of wall ,applying a coat of 3mm thick wallcare putty and two coats of oil bound distemper complete all as directed.

M&L for complete removal of existing treatment and applying a coat of 3mm thick wallcare putty and applying two coats of oil bound distemper complete all as directed.

M&L for preparation of complete removal of existing treatment and applying three coats of white washing on walls complete all as directed.

M&L for preparation of complete removal of existing treatment and applying three coats of white washing on ceiling complete all as directed.

M&L for preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide complete all as directed.

M & L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed.

M&L for preparation of New Wood surface and applying two coats of synthetic enamel paint over a coat of pink primer over 10cm width or girth complete all as directed.

M&L for 4 mm thick of size 600x600mm HSPC (High pressure steam cured) self embossed, textured designer board E-Board ( White colour) to be fixed with steel dash fasteners or from purlin from the roof with alignment clip including provision for light fixtures of any size after taking down and removing outside of MD land complete all as directed.

Fixing only anodised aluminium snap grid with opening size 600x600mm with main runner 38x24x0.9mm thick, cross tee 28.6x24x0.9mm and wall angle 19x19x0.9mm duly suspended with 4 mm dia GI barhangers 1200mm centre to centre both ways including taking down adn fixing only complete all as directed.

S&F pre-painted galvalume aluminium zinc coating (AZ 150) GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as directed.

S&F pre-painted galvalume aluminium zinc coating (AZ 150) GI based plain sheet steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as directed.

S & F second class hard wood 20mm boarding clean sawn with butt joints planed on one side fixed with nails in any situation as in weather boarding complete all as directed.

All as per serial item No 73 above but fixing only complete all as directed.

M&L for 2nd class hard wood clean sawn as in scantlings framed and fixed to walls with screws etc complete all as directed.

M&L for 2nd class hard wood clean sawn battens at 30 cm centers of sectional area exc 5 Sq cm but n.exc 15 sq cm complete all as directed.

S & F hand rails , half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing bolts posts and struts including all necessary drilling bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as directed.

S & F 0.80mm thick plain black mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings complete all as directed.

M & L for PCC 1:2:4 type B-0 using 12.5mm graded aggregate in roof kerbs or mud stops rounded or chamfered on edges as in level courses complete all as directed.

Demolition of cement concrete(un-reinforced) of any description and in any position not otherwise specifically provided for including removal of debris outside MD land complete all as directed.

M & L for rendering 10mm thick on brick work or concrete surface in CM 1:3 surface finished even and smooth without using extra cement including WPC and applying oil bound bitumen primer @ 1.50 kg/Sqm and providing 3mm thick APP modified water proofing membrane weighing 3.0kg/sqm reinforced with non woven polyster matt weighing not less than 150 gm/sqm having softening point not less than 140 centigrate having tensile strength of 650N/sqm and 350 N/Sqm in longitudinal and transverse directions respectively and of the reinforced tearing strength of 180 N by torch application with minimum 10cm side overlap and 150cm end lap, applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2kg/Sqm top of membrane surface finishing with solar effective bituminous aluminium paint @ 0.10Kg/Sqm including taking down of existing roof treatment of any thickness/any treatment and removal of debris outside MD land complete all as directed.

M & L for 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded aggregate as in padding over roof/ chajja finished even and smooth without using extra cement complete all as directed.

Supply only stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as directed.

Supply only liquid integral waterproofing compound of approved make complete all as directed by Engr-in-Charge.

S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed surfaces of wall, floors, etc Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including PVC rigid non metalic grey conduit on conceled conforming to IS-9537 with all accessories including PVC/MS terminal boxes fixed on wall with 3mm thick masonite laminated sheet top cover fixed with steel screws for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for :-

Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including PVC rigid non metalic grey conduit on surface conforming to IS-9537 with all accessories including PVC/MS terminal boxes fixed on wall with 3mm thick masonite laminated sheet top cover fixed with steel screws for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly complete all as directed :-

(a) One light or fan point controlled by one 5 Amps switch one way

(b) One 3 pin socket point 5 Amp on independent board

All same as per item No 2 here-in-before but with 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly complete all as directed.

M&L for switch piano, flush button single pole, 5 Amp one way complete all as directed.

S&F Switch socket combination flush type 5 Amp 2 in 1 complete all as directed.

S&F Switch socket combination flush type 5/16 Amp 5 in 1 complete all as directed.

M&L for ceiling rose surface bakelite 65x50mm three terminals including supplying and fixing PVC square blocks complete all as directed.

S&F fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan complete all as directed.

S&F in replacement LED light fitting of 20 watts 6000R , 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with wall mounting all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as directed.

S&F LED tube light fitting Mirror type ,2 Feet of 10 watts , 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with wall mounting all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as directed.

S&F bldg security light fittings 1x 35 Watt Ac 230v out door type LED street light with high pressure die cast aluminium and heat ressistent complete with driver ,lamp bracket with impact and corrosion resistent including thermal managment in multiple optics complete , IP65/66 and wired with all accessories and including connection with twin core twisted flexible copper conductor cable of 1.5m long of suitable size complete all as directed.

S&F steet light bracket made out of 25mm bore GI Light grade 1.00m long bent to required shape as in bracket for steet light fittings fixed with two pairs of MS flat iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flat iron surface with two coats of synthetic enamel paint over a coat of red oxide primer including taking down the unserviceable one complete all as directed.

M&L for Sub main wiring with 2 runs of 2.5 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, FRLS, 1100 volts with copper conductor multi stranded drawn in non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 2.5 sqmm single core PVC insulated & unsheathed copper conductor FRLS Cable as continuos earth wire dolly and connecting to existing main switch board / distribution board of the building as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as directed.

M&L for Sub main wiring with 2 runs of 4.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, FRLS, 1100 volts with copper conductor multi stranded drawn in non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as required alongwith one run of 4.0 sqmm single core PVC insulated & unsheathed copper conductor FRLS Cable as continuos earth wire dolly and connecting to existing main switch board / distribution board of the building as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as directed.

S&F in replacement Sheet metal enclosure (ISI marked) distribution board for 415 volts, TPN 06 way Vertical type, double door, Triple pole and neutral with 200 Amps rated copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.

S&F in replacement sheet metal enclosure (ISI marked) distribution board for 240 volts, SP 8 way horizontal type, single door, with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.

S & F in replacement Isolator four pole 100 Amps 415 volts, 25 KA rupturing capacity providing in DB complete all as directed.

S & F in replacement MCB single pole 6 to 32 Amps 240 volts, 10 KA rupturing capacity providing in DB complete all as directed.

S & Fin replacement MCB single pole & neutral 40 Amps 240 volts, 10 KA rupturing capacity provided in DB complete all as directed.

S & F ceiling fans complete with blades, down rods, electronic regulator and accessaries 230v,1200mm sweep, Min air delivery 210 CFM with service Value 6.00 BEE Five star rated with Brushless direct current motor (BLDC) with provn of twin core cable of suitable size for ceiling rose to connector connecting of earth wire as complete all as directed

S & F Exhaust fan steel body AC single phase 230 V of size 300mm sweep with blades, frame and louvers with Provn of twin core cable of suitable size for ceiling rose to connector connecting of earth wire complete all as directed.

Taking down ceiling/exhaust fan dismantling and painting of ceiling/exhaust fan complete at site with synthetic enamel paint by spraying incl (fittings with filler) one coat after cleaning all dust etc incl connecting up with provn of twin core cable of suitable size for ceiling rose to connector connecting of earth wire incl replacement of fan capacitor 2.5/3.15 MFD,canopy, bearing/bush, rubber bushes minor nuts bolts screws washers greassing in fan bearing & refixing same complete all as directed

Rewinding of ceiling fan with appropriate size of copper enamelled wire including varnishing ,heating with proper insulation complete all as directed.

Excavation in trenches in hard/dense soil, not exc 1.5 mtr wide and n exc 1.5 mtr in depth; for foundation, laying pipes/elect cables etc, and getting out complete all as directed.

Supply and spread river sand to required width at bottom and top for cable cushioning complete all as directed.

Supply and lay common burnt bricks size(230mmx115mmx75mm/ .230x.115x.075mtrs) bricks of sub class B, laid at right angle on the cable complete in trenches for cable protection complete all as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified in soft/loose/hard/dense soil complete all as directed.

Removing excavated materials of soil not exc. 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed.

S&Fmild steel galvanized pipe light grade for protection & passing of LT cable fixed to poles/walls/laid under floor/roads complete including fittings/clamps as required at site all as specified for size of 50mm bore dia complete all as directed.

Supply, fixing in replacement ,Testing and commissioning XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100Volt grade on walls with fixing acessories of 50 sq mmx 4core complete all as directed.

M & L for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts,nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 connected to earthing test point all as specified or indicated including testing on completion including dismantling of old earthing materials complete all as directed.

Supply and fixing tubes medium grade galvanised 25 mm bore, with all fitting and fixed complete to wall and ceiling or laid in floors complete all specified and directed by Engr-in-Charge.

Cutting the existing line insertion of tee and fixing all as required and directed at site complete all as directed.

Supply and fixing Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 25 mm bore . (Minimum weight 455gms) including taking down unsv float valves complete all as directed.

S&F gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe as fixed 25 mm bore in dismantling unserviceable one complete all as directed.

Excavation in trenches in hard/dense soil, not exc 1.5 mtr wide and n exc 1.5 mtr in depth; for foundation, laying pipes/elect cables etc, and getting out complete all as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified in soft/loose/hard/dense soil.

Removing excavated materials of soil not exc. 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed.

ADWITHI

PRACHANIVA CONSTRUCTIONS