Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹31.6 LAccepted-AOC 0 GHULAM MOHAMMAD AND CO 0 GURUDAWARA II RAWALPORA SRINAGAR JAMMU AND KASHMIR RAWALPORA SRINAGAR JAMMU KASHMIR 190001 | SRINAGAR | JAMMU AND KASHMIR | 190001 | L-1 | Accepted-AOC Being lowest bidder | |
| 2 | L-2₹32.9 L+₹1.1 L (3.61%)Rejected-Finance | L-2 | Rejected-Finance Other than Lowest | |
| 3 | L-3₹34.7 L+₹2.9 L (9.27%)Rejected-Finance 25 KASHIPUR KASHIPUR BALLIA UTTAR PRADESH 277001 | BALLIA | UTTAR PRADESH | 277001 | L-3 | Rejected-Finance Other than Lowest | |
| 4 | L-4₹36.8 L+₹5.1 L (16.0%)Rejected-Finance | L-4 | Rejected-Finance Other than Lowest |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
18 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Srinagar
Garrison Engineer (AF) Srinagar, Military Engineer Services Air Force Station Srinagar - 190 007
PROV OF DIVERSION OF OVERFLOW WATER, RAISED IRON PLATFORM , WPT, COLLAPSIBLE DOORS AND GRILLS IN WINDOWS, ADDN/ALTN TO BLDG NO T-695 AT AF STN SRINAGAR AND SNOW SHELTER FOR FRP AND PASSAGE WITH DOOR AT CHEEMA UNDER GE (AF) SRINAGAR.
2023_MES_614778_1
GE(AF)/SGR-49/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (AF) Srinagar
As per NIT
9 documents required · 9 mandatory
₹500
GE (AF) Srinagar
₹84,000
Yes
8 Nov 2023
21 Aug 2023
20 Sept 2023
21 Aug 2023
18 Sept 2023
4 Sept 2023
Amount
Sch 'A' Part - I (Works located at scattered location at Srinagar AF stn).
Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.
Demolition of concrete (un-reinforced) in ground floor and paving not exceeding 15cm in thickness below or above ground level including floor finish such as tiles of any thickness and any description etc., complete all as specified and directed.
Dismantling of unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed. Note- Any damage of electric wiring/fittings fitures during execution shall be make good by contractor on his own expensive without any cost to govt.
M&L for 10mm thick vitrified ceramic tiles (square) polished, dark shade colour ,area of each tiles n exc sqm in floors/skirting etc. laid over existing screed bed ,set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layers of mortar 15 mm thick for laying floor tiles in CM 1:4 ,complete all as specified and directed.
M&L for 25mm thick 1:2:4 cement concrete, type B-0 (using 12.5 mm graded crushed stone aggregate) as in sub base of floor finish even and rough to receive further floor finishes ( tile/kota stone/ marble ), complete all as specified and directed.
M&L for RCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in foundations, including rafts,footings, foundation beams, plinth beams, bases for columns,basement slabs,under-reamed piles and mass concrete, complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip, complete all as specified and directed.
M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick wall built in CM 1:4, complete all as specified and directed.
M&L for brickwork with subclass 'B' bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6, complete all as speciified and directed.
Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc including necessary scaffolding up to four storeys bldgs height if required at site including cleaning of drops, splashes and leaving premise clean and tidy & removing of debris, complete all as specified and directed. Note- Any damage of electric wiring/fittings and fixtutres during execution shell be make good by contractor on his own expense with out any cost to govt.
M&L for 15mm thick rendering in cement mortar 1:6, on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for 10mm thick rendering in cement mortar 1:4, on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for 10mm thick rendering in cement mortar 1:3, on concrete surface such as soffits of RCC slab, ceiling,chajja, roof projection etc finished even and smooth without using extra cement, complete all as specified and directed.
Preperation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer, complete all as specified and direced.
Preperation of newly plastered surfaces of wall and applying two coats of oil bound distemper over one coat of primer, complete all as specified and directed
Supply, fabricate & fix in position anodised aluminium powder coated door shutter with frame (minimum thickness of powder coating 50 micron of approved colour), partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size, mortice lock etc all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370). Note:- (i) Section No given above are of make Jindal, Contractor may use similar section of approved make mention in Appx. (ii) Floor door spring will be measured & paid separately.
Supply fabricate & fix in position aluminium powder coated three track window ( two shutters glazed & one shutters wire gauge) with frame (minimum thickness of powder coating 50 micron of approved colour), glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20736) Note:- Section No given above are of make Jindal, Contractor may use similar section of approved make mention in Appx.
S&F aluminium powder coated (minimum thickness of power coated 50 micron of approved colour) ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.50 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 40 mm wide & 4 mm thick frosted glass with aluminium louver patti, S.S wire gauge of 0.36 mm dia and 1.40 width of aperture fixed with 25 x 3 mm think aluminium strip with screw to upper half portion of ventilator including all fitting & fixture and fixed in position, complete all as specified and directed. Note:- (i) Section No given above are of make Jindal, Contractor may use similar section of approved make mention in Appx.
S&F in repairs sheet glass 5.5mm thick, ordinary quality and glazing with aluminium glazing clips and rubber neosprine gasket in square or rectangular, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.
M & L for tightening bolts and closing bolt holes, etc.to rectify the leakage/ seepage, in old roof of corrugated steel sheets by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts if required, all set in stiff white lead, Complete all as specified and directed.
S&F in repairs 6 mm thick Plywood, grade BWR, type BB, fixed with nails or screws to timber frame work, complete all as specified and direted.
S & F 20mm thick wooden planks of second class hard wood, planed one side and edges tongued and grooved or rebated fixed, to replace old and or decayed boarding in patches including cutting out old, piecing, heading joints, complete all as specified and directed.
S&F in repairs 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc, complete all as specified and directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410 Gde-E-250 quality-A, complete all as specified and directed.
M&L for plain cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in foundations,filling and mass concrete, complete all as specified and directed.
M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in foundations,filling and mass concrete, complete all as specified and directed.
M&L for easing of Aluminium Door /shutters/CB/ Sliding windows (One unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening, tightening of thing, adjustement of tower bolts, sliding bolt etc replacement of rubber beading, complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.
M & L for 600x600mm powder coated GI snap grid size frame work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed.
M&L for 12 mm thick gypsum board 600mmX600mm in ceiling fixed with screw as per manufacturers instructions including two coats of oil bound distemper over a coat 2 mm thick wall care puty, complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.
S & F 0.50 mm thick pre- painted (in camouflage pattern) galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
S & F 0.50mm thick pre-painted (in camouflage pattern) galvalume aluminum zinc coating GI based Plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
M&L for complete removal of existing treatment of walls and applying thin layer of wall care putty and prepare the smooth surface with sand paper and applying two coats of distemper oil emulsion (OBD) paint on walls, complete all as specified and directed.
M&L for 75 mm thick Cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) in hard standing/pavings/plinth protections/sub base, finished even and smooth without using extra cement, Complete all as specified and directed.
M&L for plain cement concrete 1:2:4, Type B-0 (using 12.5mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed, complete all as specified and directed.
M&L for Sand filling under floors or in foundations including watering and consolidation, Complete all as specified and direction.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment, complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade with grey cement and pigment, complete all as specified and directed.
All as per Ser item No. 1.40 here in above but except interlocing paver block including taking down, complete all as specified.
Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/ loose soil, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
S & F 0.50 mm thick pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
S & F 0.50mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long dia of neck in mm (11 to 15), complete all as specified and directed.
M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.
Prepration of new steel surface Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetice enamal paint over one coat of red oxied, complete all as specified and directed.
Supply only Liquid water proofing compound, complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:4 mixed with liquid water proofing compound (as per manufacturer’s instructions) on fair faces of brick work ,concrete surface of wall finished surface even and smooth without using extra cement, complete all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as requried to facilitate) of existing RCC etc, complete all as specified and directed.
M&L for Reinforced cement concrete, 1:2:4 (nominal mix), type-B0 (using 12.5 mm graded crushed stone aggregate) in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like, complete all as specified and directed.
M&L for Use and waste of form work to sides/ bottom of concrete PB/LB/TB cantilever lintels , shelves rough finished surfaces of concrete of flat for RCC works etc, complete all as specified and directed.
Excavation in trenches in any type of soil n exc 1.5 m wide and n exc 1.5 m in depth for foundation, complete all as specified and directed.
Returning filling including spreading, levelling, watering and well ramming in layers not exc 25 cm of any type of soil, complete all as specified and directed.
Removing excavated material n exc 150 m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and directed.
M&L for plain cement concrete 1:2:4, Type B-2 (using 40mm graded crushed stone aggregate) as in drain and channels, complete all as specified and directed.
Extra for forming fair finished drain or channel 55cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stopped ends etc., complete all as specified and directed.
M&L for chequered cement concrete tiles size 25cm X 25cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments, complete all as specified and directed.
M&L for framed work such as grills, gratings, etc. with ends of bars shouldeded and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders; framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe. 290 Gde-E-165, complete all as specified and directed.
Supply and fixing of Collapsible steel gates, top hung,consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete
M&L for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip, complete all as specified and directed.
Preperation of newly plastered surfaces of ceiling and applying two coats of white wash, complete all as specified and direced.
Demolition of cement concrete of any description including any treatment there to and in any position provided as in roof padding, roof curb etc complete all as specified and as directed. Note: - (a) Demolition should be done carefully to roof slab. (b) Any damage occurred in the roof surfaces during demolition shall be made good by the contractor without extra cost to the department. (c) Disposal of old debris/retrieved material to outside the premises or as directed by the Engineer-in-Charge.
M&L for providing plain cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregate) as in roof padding laid in slope as per requirement mixed with integral water proofing liquid admixture as per manufacturer's instructions, complete all as specified and directed. Note : (i) Minimum thickness of PCC shall be 50mm. (ii) Integral water proofing liquid admixture shall be measured and paid separately under appropriate item here in after
M&L for water proofing treatment with APP based standard membrane in roof with the following courses of treatment :- (a) Apply bituminous primer @ 0.40 Kg per sqm of the surface area including cleaning the surfaces complete all as specified. (MAKE : WP Shield Primer W of SIKA/Shalikote T-32 of STP/Equivalent brand of Tikidan Danosa. (b) Apply APP plastomeric bitumen based mineral finished water proofing membrane polyester reinforced(4 Kg/Sqm) with 10cm over laps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified and as directed. (Make of APP Membrane: WP Shield 103 PM of SIKA/Super Thermolay 3mm (MT) of STP Limited/Equivalent brand of Tikidan Danosa.
Sch 'A' Part - II (Works located at Cheema which is a Remote Area. Tenderes shall quote their rates accordingly duly considering the site condition, accessibility to site etc. ).
Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/ loose soil, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
M&L for plain cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in foundations,filling and mass concrete, complete all as specified and directed.
M&L for brickwork with subclass 'B' bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6, complete all as speciified and directed.
M&L for 10mm thick rendering in cement mortar 1:4, on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410 Gde-E-250 quality-A, complete all as specified and directed.
S & F 0.50 mm thick pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
S & F 0.50mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
M&L for 75 mm thick Cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) in hard standing/pavings/plinth protections/sub base, finished even and smooth without using extra cement, Complete all as specified and directed.
M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 10cm long dia of neck in mm (11 to 15), complete all as specified and directed.
Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe. 290 Gde-E-165, complete all as specified and directed.
M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.
Prepration of new steel surface Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetice enamal paint over one coat of red oxied, complete all as specified and directed.
Deduction to be made from BOQ for Schedule 'A' Part-III (Credit Schedule from dismentling/taking down items) worth Rs 17,690.00 during AOC. Note :- Tenderers shall not quote for this Schedule.
M/s PARVAZ CONSTRUCTION COMPANY
M/S Thakur & Sons
M/S GULZAR ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .