Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹1.3 L
Closing Date
6 Dec 2023, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
Vinutha
Combined Package for Providing of additional 11kV PCVCB /MCVCB switchgear for 11kV banks with SCADA conectivity at various 66/11kV Sub- Station TL&SS Division Hootagally and CR Nagara for birfurcation of Y Operated Feeders on PTK
KPTCL/2023-24/TB/WORK_INDENT331
KPTCL/2023-24/TB/WORK_INDENT331
Open
Terminal Bay
Two Tender Document System(Two Cover)
KPTCL SEE Works and Mantainance Circle Mysuru
9 documents required · 9 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
1.Should have carried out erection of all connected equipments of (01) One Transformer Bay of 110/66KV class or above voltage class on Total Turnkey or Partial Turnkey basis, including erection of Transformer, which shall be in satisfactory service for a period of One year prior to date of submission of the Bid. OR 2. Should have carried out erection of all connected equipments of 02(Two) Transformer Bays of 110/66KV class or above voltage class on Labour Contract or as Sub-Contract to any Turnkey Contractor including erection of Transformer in each terminal bay work, which shall be in satisfactory service for a period of One year prior to date of submission of the Bid.or similar nature/type of works of the same voltage class or above class of voltage specified in the scope of work or similar nature of work in KPTCL/ESCOMs/ Public Sector undertakings etc., need to be participated in the tender
The Bidder or his consortium partner should possess valid Super grade Electrical Contractors License issued by the Government of Karnataka as on the date of opening of techno-commercial bid.
Minimum Average Annual Turnover (MAAT) of the bidder for preceding three years ending on March or December as the case may be, shall not be less than Rs. 188.50 Lakhs/-
Work done certificate
Annual turn Over audited by CA for the past Five FY
If consortium partner availed
Non Black List, Risk and cost , No litigations, No Deviation certificates
₹3,150
₹1.3 L
23 Nov 2023
23 Nov 2023
8 Dec 2023
28 Nov 2023
27 Nov 2023
Material Portion for Providing 2 nos of additional 11kV PCVCB switchgear for 11kV bank-1 and 11kV Bank-2 with SCADA conectivity 66/11kV Sub- Station Periyapatana
11 kV CTs - 200-100/1-1 A (for feeders of 500 MVA SWG)
RCC Poles :9.5 metre Long 300 kg working load for ODS
Fabrication, galvanising and supply of High tensile
steel tower materials
for Beam out of Channel 100 x 50 with arrangements for stringing power conductor on 11 kV side (including bolts & nuts)
11KV 90KN disc insulator
Drake conductor
Coyote conductor
Bolted type tension clamp for Single Drake ACSR Conductor 120 kN, 20 mm
Bolted type tension clamp for Single Coyote ACSR Conductor 70/90 kN, 16 mm
T clamp for suitable for Drake to Coyote
T clamp for suitable for Coyote to Coyote
C - Type Wedge Connectors Drake to Drake ACSR Conductor
C - Type Wedge Connectors Drake to coyote ACSR Conductor
C - Type Wedge Connectors Coyote to coyote ACSR Conductor
Pad clamp coyote
11KV CT Clamps for Single Drake
9kV,10KA Lightning areestor ( Metal oxide)
11 kV, 400 Amps Double Break GOS
H frame for mouting GOS Set ( GI )
DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL
1.1 kV class Armoured Copper Cables :Supply of 19 Core 2.5 Sqmm Copper Control Cable
1.1 kV class Armoured Copper Cables :Supply of 4 Core 2.5 Sqmm Copper Control Cables for AC DC Extension to both control panels from ACDC and DCDB
1.1 kV class Armoured Copper Cables4 Core 10 Sq mm Copper cable with glands/lugs/ferrules
1) Out Door ACDB- 50Mtr
2) Outdoor DCDB-50Mtr
3) Outdoor PTDB- 30Mtr
4) From CT to CR panel-72 mtrs
Grounding of equipment's by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 mts long with 2 part clamp out of G.I Flat 50x6mm continuously welded around the pipe using cast iron welding el...
Supplying and providing 450mm dia 450mm height 1.5 to 2" thick hume pipe collar for earth pits including all lead lift etc.
Ferrules, glands & lugs of different sizes 2,5/4/6/10/16/35 sq mm
PVC Pipe 110mm, Bends & T s of Different sizes ( For CT Wiring )
PVC Insulation Tapes19 mm wide and in rolls of 10 Mtrs
Multi Function Transducers(MFT)
As per KPTCL Std, Interface: RS-485 Daisy Chain to RTU Com port,wiring: Both 3ph 4wire, supply: self powered, Measuring range voltage: 120%, current: 120%, frequency: 4...
Input Vtg:110V DC, input indicated by LED, input range 110VDC to 140V DC, sourcing Vtg output 48VDC, No of iputs: 12, No of outputs: 8, Source current: 5mA, at output, 8way switch to be p...
Terminal Blocks (knife type)
(8 TB's per Feeder) = (8x4 nos = 32)
Current Cable - 2.5 Sq-mm multistrand copper wire for CT termination
(Each color 15mtrs-R-Y-B)
(15mts x 3 x 4 feeder = 180mtr
Voltage Cable - 2.5 Sq-mm multistrand copper wire for PT termination
(Each color 5mtrs-R-Y-B-N)
(5mts x 4 x 4 feeder = 80mtr)
Control Cable - 10 Copper core x 1.5sqmm
(From remote contol desk to RTU)
(15mtrs x 2 nos (1 cable for 2 feeders) = mtrs)
Signal Cable - 10 Copper core x 0.5sqmm
Feeder to Feeder loop = 15mts x 4 nos =60mtrs)
for DI wiring = 15mtsX4=60mtrs
1.5 Sqmm Grey wire for interfacing of DI and DO
(20 mtrs for each panel)(20x4=80mtr)
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the size 2.5 sqmm
(50 lugs/panel x 4= 200)
C-type channel of size 50x100x50x6mm
(50cm/panel) = (0.5m x 4 nos = 2Mtrs)
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)
(Size: 32mm dia)
CT TB's - 6 nos for each panel
Labour Portion for Providing 2 nos of additional 11kV PCVCB switchgear for 11kV bank-1 and 11kV Bank-2 with SCADA conectivity 66/11kV Sub- Station Periyapatana
Multi Function Transducers(MFT) As per KPTCL Std, Interface RS-485 Daisy Chain to RTU Com port,wiring Both 3ph 4wire, supply self powered, Measuring range voltage120 percent, current 120 Percent , fre...
Opto Coupler Input Vtg110V DC, input indicated by LED, input range 110VDC to 140V DC, sourcing Vtg output 48VDC, No of iputs 12, No of outputs 8, Source current 5mA, at output, 8way switch to be provi...
Control Cable - 10 Copper core x 1.5sqmm (From remote contol desk to RTU) (15mtrs x 2 nos (1 cable for 2 feeders) = mtrs)
Signal Cable - 10 Copper core x 0.5sqmm Feeder to Feeder loop = 15mts x 4 nos =60mtrs) for DI wiring = 15mtsX4=60mtrs
CT TBs - 6 nos for each panel (4 x 6 = 24 nos)
Configuration of RTU and Engineering along with validation of data at SLDC
11 kV PCVCB, 500 MVA, 25 kA Feeder Panel with Scada compatiable With CTs and other accessories.Testing & Commissioning:Wiring:Identification of wires, Ferruling, Crimping & Termination of wires for an...
Announciator and Remote control panel .( For Single feeder )Supply not required existing panel will be utilized therefore only labour and T&C provisioned.
11 kV CTs - 200-100/1-1 A (for feeders of 500 MVA SWG)Erection of CTs and PTs and wiring including movement from the point of unloading to the point of erection and Assisting in Testing and Commission...
RCC Poles 9.5 metre Long 300 kg working load for ODS
Fabrication, galvanising and supply of High tensile steel tower materials for Beam out of Channel 100 x 50 with arrangements for stringing power conductor on 11 kV side (including bolts & nuts)1B2 4.0...
9kV,10KA Lightning areestor ( Metal oxide)
11 kV, 400 Amps Double Break GOS
H frame for mouting GOS Set ( GI )
Busbar Formation Main bus/cross bus (all the three phases in a segment) using Falcon/Drake/Lynx/Coyotesingle/double conductors with fixing of insulator spacers, levelling of string conductors to the r...
DP Structure with RCC Pole -9 Mtr Long 145 Kg WL
Releasing & Reerection of exsisting Yard light pole towards 11kV Bank-2 side.
1.1 kV class Armoured Copper Cables :Supply of 19 Core 2.5 Sqmm Copper Control Cable
1.1 kV class Armoured Copper Cables :Supply of 4 Core 2.5 Sqmm Copper Control Cables for AC DC Extension to both control panels from ACDC and DCDB
1.1 kV class Armoured Copper Cables4 Core 10 Sq mm Copper cable with glands/lugs/ferrules 1) Out Door ACDB- 50Mtr 2) Outdoor DCDB-50Mtr 3) Outdoor PTDB- 30Mtr 4) From CT to CR panel-72 mtrs
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 mts long with 2 part clamp out of G.I Flat 50x6mm continuously welded around the pipe using cast iron welding elect...
Grounding of equipment with 50x6mm GI flat and connecting to earth pit/earth mat. Each point of earthing with all formation like bending,twisting,drilling holes and connecting by welding ( Inclusive o...
Supplying and spreading 100mm thick with 20/25mm jelly with all lead and lifts.
Loading at store and unloading at site
11kv switchgear panel and station structures and Cable
If Switchgear is availed from store
Testing Portion for Providing 2 nos of additional 11kV PCVCB switchgear for 11kV bank-1 and 11kV Bank-2 with SCADA conectivity 66/11kV Sub- Station Periyapatana
11 kV PCVCB, 500 MVA, 25 kA
Feeder Panel with Scada compatiable
With CT's and other accessories.
Testing & Commissioning:
Identification of wires, Ferruling, Crimping & Termination of wires fo...
11 kV CTs - 200-100/1-1 A (for feeders of 500 MVA SWG)
Erection of CTs and PTs and wiring including movement from the point of unloading to the point of erection.+ Assisting in Testing and Commissioni...
Civil Portion for Providing 2 nos of additional 11kV PCVCB switchgear for 11kV bank-1 and 11kV Bank-2 with SCADA conectivity 66/11kV Sub- Station Periyapatana
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of app...
Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site i...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Material Portion for Providing 02 Nos additional 11kV Switchgears(MCVCB) at for load bifurcation of F-2 Maragowdanahally emanating from 66/11kV Kaggere(Hampapura) Substation, Kushalanagara Nodal Centre, TL&SS Division, Hootagalli, KPTCL, Mysore
Heat shrinkable type Cable termination kit for XLPE CABLE-INDOOR-3X240sq.mm
Heat shrinkable type Cable termination kit for XLPE CABLE-OUTDOOR-3X240 sq.mm
Providing burnt bricks to cover on power cable
1.1 kV class Armoured Copper Cables
4core x 2.5 sqmm Copper Control cable for AC supply
1.1 kV class Armoured Copper Cables
4core x 6sqmm Copper Control cable for ADC supply
1.1 kV class Armoured Copper Cables
19core x 2.5sqmm Copper Control cable for Announciation Panel
6 sqmm lugs and ferrules for Copper Control cable
2.5 sqmm lugs and ferrules for Copper Control cable
50 mm Glands for Copper Control cable
Double Pole Structure complete including 5 KG, 8 SWG GI Wire for Structure Grounding 9M RCC Poles
Supply and erection of 11kV 400A D/B GOS Set
Supply and erection 9kV, 10kA, Lighting Arrestor (Metal Oxide)
Provision of 'H' frame for GOS mounting
Pad Clamps for coyote
PG Clamp for Coyote to Rabbit
Lugs Suitable of Coyote Conductor 120 Sqmm
RCC Pole Clamp - GI
Fabrication, galvanising and supply of High tensile
steel tower materials For Holding UG Cable as per site engineer direction
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thicknees, 2.75 mts long with 2 part clamp out of G.I Flat 50x6mm continously weded alround the pipe using cast iron welding elec...
Labour Portion for Providing 02 Nos additional 11kV Switchgears(MCVCB) at for load bifurcation of F-2 Maragowdanahally emanating from 66/11kV Kaggere(Hampapura) Substation, Kushalanagara Nodal Centre, TL&SS Division, Hootagalli, KPTCL, Mysore
11 kV MCVCB, 500 MVA, 31.5 kA, 1600 A feeder and Feeder Panel SCADA compatible
11kv Announciation and Remote control Panel 2F
11Kv UG cable 3 core 240 sq mm
Heat shrinkable type Cable termination kit for XLPE CABLE-INDOOR-3X240sq.mm
Heat shrinkable type Cable termination kit for XLPE CABLE-OUTDOOR-3X240 sq.mm
Supplying and filling sieved/riddled sand of approved quality in cable trenches including all lead, lift, watering, ramming, etc.complete.
Earth work excavation for laying of UG cable in open ground and beneath the road surface in the following strata of soil by mechanical/manual means deposition of earth/rock on bank with all leads and ...
Back filling the cable trench with selected available ridded earth from the trench excavation and consolidating with ramming in successive layers of 15 cm thickness, watering wherever necessary, achie...
1.1 kV class Armoured Copper Cables 4core x 2.5 sqmm Copper Control cable for AC supply
1.1 kV class Armoured Copper Cables 4core x 6sqmm Copper Control cable for ADC supply
1.1 kV class Armoured Copper Cables 19core x 2.5sqmm Copper Control cable for Announciation Panel
Double Pole Structure complete including 5 KG, 8 SWG GI Wire for Structure Grounding 9M RCC Poles
Supply and erection of 11kV 400A D/B GOS Set
Supply and erection 9kV, 10kA, Lighting Arrestor (Metal Oxide)
Provision of H frame for GOS mounting
11kV DP Base concreteing with CC 1/4/8 - Pole based for 9mtrs square pole (650x650x150 mm)Pole concreting with CC 1/2/4 (without coping) - 9 mtrs Square pole (650x650x1700 mm)Providing coping for pole...
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thicknees, 2.75 mts long with 2 part clamp out of G.I Flat 50x6mm continously weded alround the pipe using cast iron welding electr...
Removing of Jelly and respreading of Jelly for this Mazdoor for 4 days 2 person provisioned 4X2= 8
Grounding of equipment with 50 x 6 mm G.I. Flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and conne...
Supplying and providing 450mm dia 450mm height 1.5 to 2 inch thick hume pipe collar for earth pits including set with wiring materials
Loading and Unloading a) Breaker if availed from store b) UG cable if availed from store c) Structures if availed from store
Transportation Charges from Store to Site if availed from store
Testing Portion for Providing 02 Nos additional 11kV Switchgears(MCVCB) at for load bifurcation of F-2 Maragowdanahally emanating from 66/11kV Kaggere(Hampapura) Substation, Kushalanagara Nodal Centre, TL&SS Division, Hootagalli, KPTCL, Mysore
11 kV MCVCB, 500 MVA, 31.5 kA, 1600 A feeder.
Feeder Panel SCADA compatible
11kv Announciation & Remote control Panel:- 2F
Civil Portion for Providing 02 Nos additional 11kV Switchgears(MCVCB) at for load bifurcation of F-2 Maragowdanahally emanating from 66/11kV Kaggere(Hampapura) Substation, Kushalanagara Nodal Centre, TL&SS Division, Hootagalli, KPTCL, Mysore
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of app...
Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site i...
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...
Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4 - 36/40 W W with high quality diffuser with Life of 25000 burning hours & 70 percent lumen maintenance with CRI greater ...
Material Portion for Providing 1 No. of additional 11kV PCVCB Breaker at 66/11 kV Sub-station Hanagodu,TL& SS Hootagalli Division, Mysuru
Supply 11 kV GOS - D/B 400 A
Supply 400 A Special Roster GOS (11kV DB 400A)
9 Mtr RCC pole (Using 9 Mtr RCC Poles 150 KG) for bus Formation
9 Mtr RCC DP Structure (Using 9 Mtr RCC Poles 145 Kg) for ODS
H frame set for GOS mounting
Fabrication, galvanising Iron C Chanes 100*50mm with clamps (100*50mm =4mtr*8nos
rection, assembly and alignment of Station structure as per the directions of site Engineer
9 kV, 10 kA Lightning Arrestor (Metal oxide type)
Control Cable 19 core 2.5 Sq mm (for Annunciation)
Control Cable 4 core 6 Sq mm (for CT Connection)
Control Cable 4 core 4 Sq mm (for PT supply)
Control Cable 2 core 6 Sq mm (for DC supply)
Control Cable 2 core 2.5 Sq mm ( for AC supply)
Dreke ACSR Conductor
Coyote ACSR Conductor
Tension clamp for single dreke 70/90KN 16mm
Tension clamp for single coyote 70/90KN 16mm
Disc insulator 120 kN
Disc insulator 90kN
C Type Wedge connector (Dreke-Dreke)
C Type Wedge connector (Dreke- Coyote)
C Type Wedge connector (Coyote- Coyote)
Coyote Pad clamp for GOS
Grounding of equipments by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metres long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron wel...
Supplying & Providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc.,
Galvanised Bolts & Nuts of Various Sizes
Earthing name plates for new earting pits
PVC Pipe 150 mm dia & accessories
PVC bend 150 mm dia
PVC EndCap 150 mm dia
PVC T- 150 mm dia
Labour Portion for Providing 1 No. of additional 11kV PCVCB Breaker at 66/11 kV Sub-station Hanagodu,TL& SS Hootagalli Division, Mysuru
Supply of 11 kV, 350 MVA, 20KA procelain Clad VCB Switchgear(800A) outdoor type, CT's of ration 200-100/1-1A and Terminal connectors suitable For Coyote ACSR ets., complete as per technical specificat...
Annunciation & Remote control panel for 1 feeder as per kptcl specification
Supply 11 kV GOS - D/B 400 A
Supply 400 A Special Roster GOS (11kV DB 400A)
9 Mtr RCC pole (Using 9 Mtr RCC Poles 150 KG) for bus Formation
9 Mtr RCC DP Structure (Using 9 Mtr RCC Poles 145 Kg) for ODS
H frame set for GOS mounting
Fabrication, galvanising Iron C Chanes 100*50mm with clamps (100*50mm =4mtr*8nos
rection, assembly and alignment of Station structure as per the directions of site Engineer
9 kV, 10 kA Lightning Arrestor (Metal oxide type)
Control Cable 19 core 2.5 Sq mm (for Annunciation)
Control Cable 4 core 6 Sq mm (for CT Connection)
Control Cable 4 core 4 Sq mm (for PT supply)
Control Cable 2 core 6 Sq mm (for DC supply)
Control Cable 2 core 2.5 Sq mm ( for AC supply)
Bus formation all three phases using Coyote single conductor with fixing of insulators,levelling of string conductors to required height above the equipment,including providing jumps to interconnect...
Grounding of equipments by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metres long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron wel...
Grounding of equipment with 50 x 6mm G.I. Flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending,twisting, drilling of holes and connect...
Testing Portion for Providing 1 No. of additional 11kV PCVCB Breaker at 66/11 kV Sub-station Hanagodu,TL& SS Hootagalli Division, Mysuru
Supply of 11 kV, 350 MVA, 20KA procelain Clad VCB Switchgear(800A) outdoor type, CT's of ration 200-100/1-1A and Terminal connectors suitable For Coyote ACSR ets., complete as per technical specificat...
Civil Portion for Providing 1 No. of additional 11kV PCVCB Breaker at 66/11 kV Sub-station Hanagodu,TL& SS Hootagalli Division, Mysuru
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site i...
Material Portion for providing 02 No additional 11kV Switchgears(MCVCB) at 66/11kV Santhe Saraguru Substation, Kadakola Nodal Centre, TL&SS Division, Hootagalli, KPTCL, Mysore
Heat shrinkable type Cable termination kit for XLPE CABLE-INDOOR-3X240 sq.mm
Heat shrinkable type Cable termination kit for XLPE CABLE-OUTDOOR-3X240 sq.mm
Providing burnt bricks to cover on power cable
1.1 kV class Armoured Copper Cables
4core x 2.5 sqmm Copper Control cable for AC supply
1.1 kV class Armoured Copper Cables
4core x 6sqmm Copper Control cable for ADC supply
1.1 kV class Armoured Copper Cables
19core x 2.5sqmm Copper Control cable for Announciation Panel
6 sqmm lugs and ferrules for Copper Control cable
2.5 sqmm lugs and ferrules for Copper Control cable
50 mm Glands for Copper Control cable
DP Structure using RCC Pole - 9 Mtr Long, 145 Kg WL
(Including Cost of Poles)
Supply and erection of 11kV 400A D/B GOS Set
Supply and erection 9kV, 10kA, Lighting Arrestor (Metal Oxide)
Provision of 'H' frame for GOS mounting
Pad Clamps for coyote
PG Clamp for Coyote to Rabbit
Lugs Suitable of Coyote Conductor 150 Sqmm
RCC Pole Clamp - GI
Fabrication, galvanising and supply of High tensile
steel tower materials For Holding UG Cable as per site engineer direction
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thicknees, 2.75 mts long with 2 part clamp out of G.I Flat 50x6mm continously weded alround the pipe using cast iron welding elec...
Labour portion for providing 02 No additional 11kV Switchgears(MCVCB) at 66/11kV Santhe Saraguru Substation, Kadakola Nodal Centre, TL&SS Division, Hootagalli, KPTCL, Mysore
11 kV MCVCB, 500 MVA, 31.5 kA, 1600 A feeder and Feeder Panel SCADA compatible
11kv Announciation and Remote control Panel 2F
11Kv UG cable 3 core 240 sq mm
Heat shrinkable type Cable termination kit for XLPE CABLE-INDOOR-3X240sq.mm
Heat shrinkable type Cable termination kit for XLPE CABLE-OUTDOOR-3X240 sq.mm
Supplying and filling sieved/riddled sand of approved quality in cable trenches including all lead, lift, watering, ramming, etc.complete.
Earth work excavation for laying of UG cable in open ground and beneath the road surface in the following strata of soil by mechanical/manual means deposition of earth/rock on bank with all leads and ...
Back filling the cable trench with selected available ridded earth from the trench excavation and consolidating with ramming in successive layers of 15 cm thickness, watering wherever necessary, achie...
1.1 kV class Armoured Copper Cables 4core x 2.5 sqmm Copper Control cable for AC supply
1.1 kV class Armoured Copper Cables 4core x 6sqmm Copper Control cable for ADC supply
1.1 kV class Armoured Copper Cables 19core x 2.5sqmm Copper Control cable for Announciation Panel
Double Pole Structure complete including 5 KG, 8 SWG GI Wire for Structure Grounding 9M RCC Poles
Supply and erection of 11kV 400A D/B GOS Set
Supply and erection 9kV, 10kA, Lighting Arrestor (Metal Oxide)
Provision of H frame for GOS mounting
11kV DP Base concreteing with CC 1/4/8 - Pole based for 9mtrs square pole (650x650x150 mm)Pole concreting with CC 1/2/4 (without coping) - 9 mtrs Square pole (650x650x1700 mm)Providing coping for pole...
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thicknees, 2.75 mts long with 2 part clamp out of G.I Flat 50x6mm continously weded alround the pipe using cast iron welding electr...
Removing of Jelly and respreading of Jelly for this Mazdoor for 4 days 2 person provisioned 4X2= 8
Grounding of equipment with 50 x 6 mm G.I. Flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and conne...
Supplying and providing 450mm dia 450mm height 1.5 to 2 inch thick hume pipe collar for earth pits including set with wiring materials
Loading and Unloading a) Breaker if availed from store b) UG cable if availed from store c) Structures if availed from store
Transportation Charges from Store to Site if availed from store
Testing Portion for providing 02 No additional 11kV Switchgears(MCVCB) at 66/11kV Santhe Saraguru Substation, Kadakola Nodal Centre, TL&SS Division, Hootagalli, KPTCL, Mysore
11 kV MCVCB, 500 MVA, 31.5 kA, 1600 A feeder.
Feeder Panel SCADA compatible
11kV Announciation & Remote control Panel:- 2F
Material Portion for Providing 2 nos of additional 11kV PCVCB switchgears for Load Bifurcation of Y Operated feeders at 66/11kV Hossurgate, Substation, S.R.S Hootagally Nodal Center, TL&SS Division Hootagally Mysore.
11 kV CTs - 200-100/1-1 A (for feeders of 350 MVA SWG)
Erection of CTs and PTs and wiring including movement from the point of unloading to the point of erection.+ Assisting in Testing and Commissioni...
Fabrication, galvanising and supply of High tensile
steel tower materials
for Beam out of Channel 100 x 50 with arrangements for stringing power conductor on 11 kV side (including bolts & nuts)
11KV 90KN disc insulator
Drake conductor
Coyote conductor
Bolted type tension clamp for Single Drake ACSR Conductor 120 kN, 20 mm
Bolted type tension clamp for Single Coyote ACSR Conductor 70/90 kN, 16 mm
C - Type Wedge Connectors Drake to Drake ACSR Conductor
C - Type Wedge Connectors Drake to coyote ACSR Conductor
C - Type Wedge Connectors Coyote to coyote ACSR Conductor
11kV Polymeric Disc Insulator 120kN suitable for Coyote Conductors
Pad clamp coyote
11KV CT Clamps for Single Coyote
9kV,10KA Lightning areestor ( Metal oxide)
11 kV, 400 Amps Double Break GOS
H frame for mouting GOS Set ( GI )
DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL
1.1 kV class Armoured Copper Cables :
Supply of 19 Core 2.5 Sqmm Copper Control Cable
1.1 kV class Armoured Copper Cables :
Supply of 4 Core 2.5 Sqmm Copper Control Cables for AC DC Extension to both control panels from ACDC and DCDB
1.1 kV class Armoured Copper Cables :
4 Core 10 Sq mm Copper cable with glands/lugs/ferrules
1) Out Door ACDB- 200Mtr
2) Outdoor DCDB-200Mtr
3) Outdoor PTDB- 200Mtr
4) From CT to CR panel-150 mtrs
Grounding of equipment's by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 mts long with 2 part clamp out of G.I Flat 50x6mm continuously welded around the pipe using cast iron welding el...
Ferrules, glands & lugs of different sizes 2,5/4/6/10/16/35 sq mm
PVC Pipe 110mm, Bends & T s of Different sizes ( For CT Wiring )
Copper Eath Bond 450 mm long
PVC Insulation Tapes19 mm wide and in rolls of 10 Mtrs
labour Portion for Providing 2 nos of additional 11kV PCVCB switchgears for Load Bifurcation of Y Operated feeders at 66/11kV Hossurgate, Substation, S.R.S Hootagally Nodal Center, TL&SS Division Hootagally Mysore.
11 kV PCVCB, 350 MVA, 20 kAFeeder Panel with Scada compatiable With CTs and other accessories Testing & Commissioning-Wiring-Identification of wires, Ferruling, Crimping & Termination of wires for ann...
11 kV CTs - 200-100/1-1 A (for feeders of 350 MVA SWG)Erection of CTs and PTs and wiring including movement from the point of unloading to the point of erection and Assisting in Testing and Commission...
Fabrication, galvanising and supply of High tensile steel tower materials for Beam out of Channel 100 x 50 with arrangements for stringing power conductor on 11 kV side (including bolts & nuts)1B2 4.0...
9kV,10KA Lightning areestor ( Metal oxide)
11 kV, 400 Amps Double Break GOS
H frame for mouting GOS Set ( GI )
Busbar Formation-Main bus/cross bus (all the three phases in a segment) using
Falcon/Drake/Lynx/Coyotesingle/double conductors with fixing of insulator spacers, levelling of string conductors to the r...
DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL
1.1 kV class Armoured Copper Cables Supply of 19 Core 2.5 Sqmm Copper Control Cable
1.1 kV class Armoured Copper Cables Supply of 4 Core 2.5 Sqmm Copper Control Cables for AC DC Extension to both control panels from ACDC and DCDB
1.1 kV class Armoured Copper Cables 4 Core 10 Sq mm Copper cable with glands/lugs/ferrules1) Out Door ACDB- 200Mtr 2) Outdoor DCDB-200Mtr 3) Outdoor PTDB- 200Mtr 4) From CT to CR panel-150 mtrs
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 mts long with 2 part clamp out of G.I Flat 50x6mm continuously welded around the pipe using cast iron welding ele...
Grounding of equipment with 50x6mm GI flat and connecting to earth pit/earth mat Each point of earthing with all formation like bending,twisting,drilling holes and connecting by welding ( Inclusive of...
11kV DP Base concreteing with CC 1:4:8 - Pole based for 9mtrs square pole (650x650x150 mm)Pole concreting with CC 1:2:4 (without coping) - 9 mtrs Square pole (650x650x1700 mm)
Providing coping for pol...
Earth work excavation for laying of UG cable in open ground and beneath the road surface in the following strata of soil by mechanical or manual means deposition of earth/rock on bank with all leads a...
Back filling the cable trench with selected available ridded earth from the trench excavation & consolidating with ramming in successive layers of 15 cm thickness, watering wherever necessary, achievi...
Supplying and providing 450mm dia 450mm height 1.5 to 2 inch thick hume pipe collar for earth pits including all lead lift etc
Loading at store and unloading a) 11kv switchgear panel 5.368 MT b) Control Cable1 MT c) CI Pipe for Earthing 0.4MT d) Current Transformer 0.5MT e) Other Hardwares 1MT This will be utilized as per fie...
Transportation of Material availed from Store to site through and fro charges
Heavy Mazddor for Removing Jelly and respreading the same at the work spot2 Days 2 Person"
Testing Portion for Providing 2 nos of additional 11kV PCVCB switchgears for Load Bifurcation of Y Operated feeders at 66/11kV Hossurgate, Substation, S.R.S Hootagally Nodal Center, TL&SS Division Hootagally Mysore.
11 kV PCVCB, 350 MVA, 20 kA
Feeder Panel with Scada compatiable With CT's and other accessories.
Testing & Commissioning:
Identification of wires, Ferruling, Crimping & Termination of wires fo...
11 kV CTs - 200-100/1-1 A (for feeders of 350 MVA SWG)
Erection of CTs and PTs and wiring including movement from the point of unloading to the point of erection.+ Assisting in Testing and Commissioni...
Civil Portion for Providing 2 nos of additional 11kV PCVCB switchgears for Load Bifurcation of Y Operated feeders at 66/11kV Hossurgate, Substation, S.R.S Hootagally Nodal Center, TL&SS Division Hootagally Mysore.
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ra...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of app...
Material Portion for providing 1 Nos additional 11 kV PCVCB breaker for load bifurcation of F3 Yashvanthapura (IP Feeder) 11 kV Feeders at 66/11 kV B Matakere substation, Kadokola Nodal Centre, TL & SS Hootagally Division, KPTCL, Mysuru
Beam out of Channel 100 x 50 with arrangements for stringing power conductor on 11 kV side (including bolts & nuts) 1B2 4.00 metre Long (4 nos)
Station Structure: Erection, assembly and alignment of S...
Supply of 4 Core 2.5 Sqmm Copper Control Cable . ( For PT Supply Extension to breaker Panel + AC Extension to Remote Control Panel + DC Supply Extension to Remote control Panel )
Supply of 19 Core 2.5 Sqmm Copper Control Cable
Supply of 4 Core 6 Sqmm Copper Control Cables
1) Out Door ACDB- 65 Mtr
2) Outdoor DCDB-65 Mtr
3) Outdoor PTDB- 70 Mtr
DP Structure with 9 Mtrs RCC Poles
H-Frame for mounting GOS
9kV, 10kA, Lighting Arrestor (Metal Oxide)
Supply of 11kV 400A D/B GOS Set
1) for DP 2) For Bus End
Grounding of equipment's by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 mts long with 2 part clamp out of G.I Flat 50x6mm continuously welded around the pipe using cast iron welding el...
Coyote ACSR conductor
Disc Insulator 90 kN
Polymeric disc insulators
33 kV Pin Insulator Shell with pin/Pedastal insulator
Bolted type tension clamp for Single Coyote ACSR Conductor 70/90 kN, 16 mm
Pad Clamp -Coyote
C - Type Wedge Connectors Coyote to coyote ACSR Conductor
11 kV, Special 3 Pin Cross Arm - GI
Supply of Galvanised Bolts & Nuts of Different Sizes
Ferrules, glands & lugs of different sizes 2,5/4/6/10/16/35 sq mm
PVC Pipe 150 mm Dia
PVC Bends & T s of Different sizes
PVC Insulation Tapes19 mm wide and in rolls of 10 Mtrs
RCC Pole Clamp - GI for Running GI flat at DP & for holdding PVC Pipe at Breaker structure
Earth bond 450mm long ( for GOS 2 Nos CT 6 Nos,0 Bus Gos 2No)
Labour Portion providing 1 Nos additional 11 kV PCVCB breaker for load bifurcation of F3 Yashvanthapura (IP Feeder) 11 kV Feeders at 66/11 kV B Matakere substation, Kadokola Nodal Centre, TL & SS Hootagally Division, KPTCL, Mysuru
11 kV PCVCB, 350 MVA, 20 kA, 800 A feeder Panel
With CT's and other accessories.
Testing & Commissioning:
Identification of wires, Ferruling, Crimping & Termination of wires for annunciation, ...
Beam out of Channel 100 x 50 with arrangements for stringing power conductor on 11 kV side (including bolts & nuts) 1B2 4.00 metre Long (4 no's)
Station Structure: Erection, assembly and alignment of ...
Supply of 4 Core 2.5 Sqmm Copper Control Cable . ( For PT Supply Extension to breaker Panel + AC Extension to Remote Control Panel and DC Supply Extension to Remote control Panel )
Supply of 19 Core 2.5 Sqmm Copper Control Cable
Supply of 4 Core 6 Sqmm Copper Control Cables
1) Out Door ACDB- 65 Mtr
2) Outdoor DCDB-65 Mtr
3) Outdoor PTDB- 70 Mtr
DP Structure with 9 Mtrs RCC Poles
H-Frame for mounting GOS
9kV, 10kA, Lighting Arrestor (Metal Oxide)
Supply of 11kV 400A D/B GOS Set
1) for DP 2) For Bus End
Grounding of equipment's by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 mts long with 2 part clamp out of G.I Flat 50x6mm continuously welded around the pipe using cast iron welding el...
Supplying and providing 450mm dia 450mm height 1.5 to 2" thick hume pipe collar for earth pits including all lead lift etc.
Formation of 11kV Bus Bar using Coyote/Drake ACSR
Grounding equipment with 50*6mm GI flat and connecting to Earth pit/ Earth mat. each point of Earthing with all dformetion like bending , twisting, drilling holes and connecting by welding - incluisiv...
Earthing name plates and feede identification name plates
Crane hiring charges for Sub-station work -Up to 5 hour - 1756.95 For 2 Hrs
Loading & Unloading-a) Loading of Breaker+annouciator panel and CI pipe at store b) Unloading of Breaker+annouciator panel and CI pipe at site
Transportation of Materials from store to Site through fro
Testing Portion for providing 1 Nos additional 11 kV PCVCB breaker for load bifurcation of F3 Yashvanthapura (IP Feeder) 11 kV Feeders at 66/11 kV B Matakere substation, Kadokola Nodal Centre, TL & SS Hootagally Division, KPTCL, Mysuru
11 kV PCVCB, 350 MVA, 20 kA, 800 A feeder Panel
With CT's and other accessories.
Testing & Commissioning:
Identification of wires, Ferruling, Crimping & Termination of wires for annunciation, ...
Civil portion for providing 1 Nos additional 11 kV PCVCB breaker for load bifurcation of F3 Yashvanthapura (IP Feeder) 11 kV Feeders at 66/11 kV B Matakere substation, Kadokola Nodal Centre, TL & SS Hootagally Division, KPTCL, Mysuru
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site i...
Material Portion for Providing 02 No additional 11kV Switchgears(MCVCB) at 66/11kV Yarahalli Handpopst Substation, Kadakola Nodal Centre, TL&SS Division, Hootagalli, KPTCL, Mysore
Heat shrinkable type Cable termination kit for XLPE CABLE-INDOOR-3X240 sq.mm
Heat shrinkable type Cable termination kit for XLPE CABLE-OUTDOOR-3X240 sq.mm
Providing burnt bricks to cover on power cable
1.1 kV class Armoured Copper Cables
4core x 2.5 sqmm Copper Control cable for AC supply
1.1 kV class Armoured Copper Cables
4core x 6sqmm Copper Control cable for ADC supply
1.1 kV class Armoured Copper Cables
19core x 2.5sqmm Copper Control cable for Announciation Panel
6 sqmm lugs and ferrules for Copper Control cable
2.5 sqmm lugs and ferrules for Copper Control cable
50 mm Glands for Copper Control cable
DP Structure using RCC Pole - 9 Mtr Long, 145 Kg WL
(Including Cost of Poles)
Supply and erection of 11kV 400A D/B GOS Set
Supply and erection 9kV, 10kA, Lighting Arrestor (Metal Oxide)
Provision of 'H' frame for GOS mounting
Pad Clamps for coyote
PG Clamp for Coyote to Rabbit
Lugs Suitable of Coyote Conductor 150 Sqmm
RCC Pole Clamp - GI
Fabrication, galvanising and supply of High tensile
steel tower materials For Holding UG Cable as per site engineer direction
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thicknees, 2.75 mts long with 2 part clamp out of G.I Flat 50x6mm continously weded alround the pipe using cast iron welding elec...
Labour Portion for Providing 02 No additional 11kV Switchgears(MCVCB) at 66/11kV Yarahalli Handpopst Substation, Kadakola Nodal Centre, TL&SS Division, Hootagalli, KPTCL, Mysore
11 kV MCVCB, 500 MVA, 25 kA, 1600 A feeder.Feeder Panel SCADA compatible
11kV Announciation and Remote control Panel 2F
11Kv UG cable 3 core 240 sq.mm 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975
Heat shrinkable type Cable termination kit for XLPE CABLE-INDOOR-3X240 sq.mm
Heat shrinkable type Cable termination kit for XLPE CABLE-OUTDOOR-3X240 sq.mm
Supplying and filling sieved/riddled sand of approved quality in cable trenches including all lead, lift, watering, ramming, etc.complete.
Earth work excavation for laying of UG cable in open ground and beneath the road surface in the following strata of soil by mechanical/manual means deposition of earth/rock on bank with all leads and ...
Back filling the cable trench with selected available ridded earth from the trench excavation and consolidating with ramming in successive layers of 15 cm thickness, watering wherever necessary, achie...
1.1 kV class Armoured Copper Cables 4core x 2.5 sqmm Copper Control cable for AC supply
1.1 kV class Armoured Copper Cables 4core x 6sqmm Copper Control cable for ADC supply
1.1 kV class Armoured Copper Cables 19core x 2.5sqmm Copper Control cable for Announciation Panel
DP Structure using RCC Pole - 9 Mtr Long, 145 Kg WL (Including Cost of Poles)
Supply and erection of 11kV 400A D/B GOS Set
Supply and erection 9kV, 10kA, Lighting Arrestor (Metal Oxide)
Provision of H frame for GOS mounting
11kV DP Base concreteing with CC 1:4:8 - Pole based for 9mtrs square pole (650x650x150 mm)Pole concreting with CC 1:2:4 (without coping) - 9 mtrs Square pole (650x650x1700 mm)
Providing coping for pol...
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thicknees, 2.75 mts long with 2 part clamp out of G.I Flat 50x6mm continously weded alround the pipe using cast iron welding electr...
Removing of Jelly and respreading of Jelly for this Mazdoor for 2 days 2 person provisioned
Grounding of equipment with 50 x 6 mm G.I. Flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and conne...
Supplying and providing 450mm dia 450mm height 1.5 to 2inch thick hume pipe collar for earth pits including set with wiring materials
Loading and Unloading a) Breaker if availed from store b) UG cable if availed from store c) Structures if availed from store
Transportation Charges from Store to Site if availed from store
Testing portion for Providing 02 No additional 11kV Switchgears(MCVCB) at 66/11kV Yarahalli Handpopst Substation, Kadakola Nodal Centre, TL&SS Division, Hootagalli, KPTCL, Mysore
11 kV MCVCB, 500 MVA, 25 kA, 1600 A feeder.
Feeder Panel SCADA compatible
11kV Announciation & Remote control Panel:- 2F
Material portion for Providing 2 Nos additional 11 kV PCVCB breaker for load bifurcation of overloaded F1-Abbanakuppe & F3-Keeranahally IP 11 kV Feeders at 66/11 kV Kamplapura substation, SRS Hootagally Nodal Centre, TL & SS Hootagally Division, KPTCL, Mysuru
Beam out of Channel 100 x 50 with arrangements for stringing power conductor on 11 kV side (including bolts & nuts) 1B2 4.00 metre Long (4 no's)
Station Structure: Erection, assembly and alignment of ...
Supply of 4 Core 2.5 Sqmm Copper Control Cable . ( For PT Supply Extension to breaker Panel + AC Extension to Remote Control Panel + DC Supply Extension to Remote control Panel )
Supply of 19 Core 2.5 Sqmm Copper Control Cable
Supply of 4 Core 6 Sqmm Copper Control Cables
1) Out Door ACDB- 65Mtr
2) Outdoor DCDB-65Mtr
3) Outdoor PTDB- 70Mtr
DP Structure with 9 Mtrs RCC Poles
H-Frame for mounting GOS
9kV, 10kA, Lighting Arrestor (Metal Oxide)
Supply of 11kV 400A D/B GOS Set
1) for DP 2) For Bus End
Grounding of equipment's by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 mts long with 2 part clamp out of G.I Flat 50x6mm continuously welded around the pipe using cast iron welding el...
Coyote ACSR conductor
Disc Insulator 90 kN
Polymeric disc insulators
33 kV Pin Insulator Shell with pin/Pedastal insulator
Bolted type tension clamp for Single Coyote ACSR Conductor 70/90 kN, 16 mm
Pad Clamp -Coyote
C - Type Wedge Connectors Coyote to coyote ACSR Conductor
11 kV, Special 3 Pin Cross Arm - GI
Supply of Galvanised Bolts & Nuts of Different Sizes
Ferrules, glands & lugs of different sizes 2,5/4/6/10/16/35 sq mm
PVC Pipe 150 mm Dia
PVC Bends & T s of Different sizes
PVC Insulation Tapes19 mm wide and in rolls of 10 Mtrs
RCC Pole Clamp - GI for Running GI flat at DP & for holdding PVC Pipe at Breaker structure
Earth bond 450mm long ( for GOS 2 Nos CT 6 Nos,0 Bus Gos 2No)
Labour Portion for Providing 2 Nos additional 11 kV PCVCB breaker for load bifurcation of overloaded F1-Abbanakuppe & F3-Keeranahally IP 11 kV Feeders at 66/11 kV Kamplapura substation, SRS Hootagally Nodal Centre, TL & SS Hootagally Division, KPTCL, Mysuru
11 kV PCVCB, 350 MVA, 20 kA, 800 A feeder Panel
With CT's and other accessories.
Testing & Commissioning:
Identification of wires, Ferruling, Crimping & Termination of wires for annunciation, ...
11kV Annunciator and Remote Control Panel for four feeder
Beam out of Channel 100 x 50 with arrangements for stringing power conductor on 11 kV side (including bolts & nuts) 1B2 4.00 metre Long (4 no's)
Station Structure: Erection, assembly and alignment of ...
Supply of 4 Core 2.5 Sqmm Copper Control Cable . ( For PT Supply Extension to breaker Panel + AC Extension to Remote Control Panel + DC Supply Extension to Remote control Panel )
Supply of 19 Core 2.5 Sqmm Copper Control Cable
Supply of 4 Core 6 Sqmm Copper Control Cables
1) Out Door ACDB- 65Mtr
2) Outdoor DCDB-65Mtr
3) Outdoor PTDB- 70Mtr
DP Structure with 9 Mtrs RCC Poles
H-Frame for mounting GOS
9kV, 10kA, Lighting Arrestor (Metal Oxide)
Supply of 11kV 400A D/B GOS Set
1) for DP 2) For Bus End
Grounding of equipment's by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 mts long with 2 part clamp out of G.I Flat 50x6mm continuously welded around the pipe using cast iron welding el...
Supplying and providing 450mm dia 450mm height 1.5 to 2" thick hume pipe collar for earth pits including all lead lift etc.
Formation of 11kV Bus Bar using Coyote/Drake ACSR
Grounding equipment with 50*6mm GI flat and connecting to Earth pit/ Earth mat. each point of Earthing with all dformetion like bending , twisting, drilling holes and connecting by welding
Earthing name plates and feede identification name plates
Crane hiring charges for Sub-station works
Loading & Unloading
a) Loading of Breaker+annouciator panel + CI pipe at store
b) Unloading of Breaker+annouciator panel + CI pipe at site
Transportation of Materials from store to Site through fro
Testing Portion for Providing 2 Nos additional 11 kV PCVCB breaker for load bifurcation of overloaded F1-Abbanakuppe & F3-Keeranahally IP 11 kV Feeders at 66/11 kV Kamplapura substation, SRS Hootagally Nodal Centre, TL & SS Hootagally Division, KPTCL, Mysuru
11 kV PCVCB, 350 MVA, 20 kA, 800 A feeder Panel
With CT's and other accessories.
Testing & Commissioning:
Identification of wires, Ferruling, Crimping & Termination of wires for annunciation, ...
11kV Annunciator and Remote Control Panel for four feeder
Civil portion for Providing 2 Nos additional 11 kV PCVCB breaker for load bifurcation of overloaded F1-Abbanakuppe & F3-Keeranahally IP 11 kV Feeders at 66/11 kV Kamplapura substation, SRS Hootagally Nodal Centre, TL & SS Hootagally Division, KPTCL, Mysuru
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site i...
Mazdoor heavy for removing and respreading of jelly
Material Portion for Providing 2 Nos additional 11 kV PCVCB breaker for load bifurcation of F5-Kelaganahalli & F11-Thammadahalli (Rural and IP Feeder) 11 kV Feeders at 66/11 kV Ravandur substation, Kushalangara Nodal Centre, TL &SS Hootagally Division
Beam out of Channel 100 x 50 with arrangements for stringing power conductor on 11 kV side (including bolts & nuts) 1B2 4.00 metre Long (4 no's)
Station Structure: Erection, assembly and alignment of ...
Supply of 4 Core 2.5 Sqmm Copper Control Cable . ( For PT Supply Extension to breaker Panel + AC Extension to Remote Control Panel + DC Supply Extension to Remote control Panel )
Supply of 19 Core 2.5 Sqmm Copper Control Cable
Supply of 4 Core 6 Sqmm Copper Control Cables
1) Out Door ACDB- 65Mtr
2) Outdoor DCDB-65Mtr
3) Outdoor PTDB- 70Mtr
DP Structure with 9 Mtrs RCC Poles
H-Frame for mounting GOS
9kV, 10kA, Lighting Arrestor (Metal Oxide)
Supply of 11kV 400A D/B GOS Set
1) for DP 2) For Bus End
Grounding of equipment's by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 mts long with 2 part clamp out of G.I Flat 50x6mm continuously welded around the pipe using cast iron welding el...
Coyote ACSR conductor
Disc Insulator 90 kN
Polymeric disc insulators
33 kV Pin Insulator Shell with pin/Pedastal insulator
Bolted type tension clamp for Single Coyote ACSR Conductor 70/90 kN, 16 mm
Pad Clamp -Coyote
C - Type Wedge Connectors Coyote to coyote ACSR Conductor
11 kV, Special 3 Pin Cross Arm - GI
Supply of Galvanised Bolts and Nuts of Different Sizes
Ferrules, glands and lugs of different sizes 2,5/4/6/10/16/35 sq mm
PVC Pipe 150 mm Dia
PVC Bends & T s of Different sizes
PVC Insulation Tapes19 mm wide and in rolls of 10 Mtrs
RCC Pole Clamp - GI for Running GI flat at DP & for holdding PVC Pipe at Breaker structure
Earth bond 450mm long ( for GOS 2 Nos CT 6 Nos,0 Bus Gos 2No)
Labour Portion for Providing 2 Nos additional 11 kV PCVCB breaker for load bifurcation of F5-Kelaganahalli & F11-Thammadahalli (Rural and IP Feeder) 11 kV Feeders at 66/11 kV Ravandur substation, Kushalangara Nodal Centre, TL &SS Hootagally Division
11 kV PCVCB, 500 MVA, 25 kA, 800 A feeder Panel
With CT's and other accessories.
Testing & Commissioning:
Identification of wires, Ferruling, Crimping & Termination of wires for annunciation, ...
11kV Annunciator and Remote Control Panel for four feeder
Beam out of Channel 100 x 50 with arrangements for stringing power conductor on 11 kV side (including bolts & nuts) 1B2 4.00 metre Long (4 no's)
Station Structure: Erection, assembly and alignment of ...
Supply of 4 Core 2.5 Sqmm Copper Control Cable . ( For PT Supply Extension to breaker Panel + AC Extension to Remote Control Panel + DC Supply Extension to Remote control Panel )
Supply of 19 Core 2.5 Sqmm Copper Control Cable
Supply of 4 Core 6 Sqmm Copper Control Cables
1) Out Door ACDB- 65Mtr
2) Outdoor DCDB-65Mtr
3) Outdoor PTDB- 70Mtr
DP Structure with 9 Mtrs RCC Poles
H-Frame for mounting GOS
9kV, 10kA, Lighting Arrestor (Metal Oxide)
Supply of 11kV 400A D/B GOS Set
1) for DP 2) For Bus End
Grounding of equipment's by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 mts long with 2 part clamp out of G.I Flat 50x6mm continuously welded around the pipe using cast iron welding el...
Supplying and providing 450mm dia 450mm height 1.5 to 2" thick hume pipe collar for earth pits including all lead lift etc.
Formation of 11kV Bus Bar using Coyote/Drake ACSR
Grounding equipment with 50*6mm GI flat and connecting to Earth pit/ Earth mat. each point of Earthing with all dformetion like bending , twisting, drilling holes and connecting by welding
Earthing name plates and feede identification name plates
Crane hiring charges for Sub-station works
Loading & Unloading
a) Loading of Breaker+annouciator panel + CI pipe at store
b) Unloading of Breaker+annouciator panel + CI pipe at site
Transportation of Materials from store to Site through fro
Testing Portion for Providing 2 Nos additional 11 kV PCVCB breaker for load bifurcation of F5-Kelaganahalli & F11-Thammadahalli (Rural and IP Feeder) 11 kV Feeders at 66/11 kV Ravandur substation, Kushalangara Nodal Centre, TL &SS Hootagally Division
11 kV PCVCB, 500 MVA, 25 kA, 800 A feeder Panel
With CT's and other accessories.
Testing & Commissioning:
Identification of wires, Ferruling, Crimping & Termination of wires for annunciation, ...
11kV Annunciator and Remote Control Panel for four feeder
Civil Portion for Providing 2 Nos additional 11 kV PCVCB breaker for load bifurcation of F5-Kelaganahalli & F11-Thammadahalli (Rural and IP Feeder) 11 kV Feeders at 66/11 kV Ravandur substation, Kushalangara Nodal Centre, TL &SS Hootagally Division
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site i...
material portion for providing 2 Nos of 11kV PCVC Feeder Switchgear for additional feeders at 66/11kV Substation, Chandakavadi in Chamarajanagara TL&SS Division
Lightning Arrestors 9 Kv 10 kA Lightning Arrestor (Metal oxide type) for outgoing 11kV lines and station auxillary transformer
11 kV Double pole structure : RCC Poles: 9Mtr Long 150kg Working load for 11kv Outgoing DP Structure.
DP Sets/Two pole structure kit (Galvanised iron) (Excluding GST)
H Frame set for mounting 400A S/B GOS. (GI)
11 kV isolator, Single break Roaster GOS 400 A, 25 KA capacity
11 kV ODS - 11 kV ODS structure Column out of 9.5 Mtr. Long RCC pole for 300 Kgs. Working load for 11 kV ODS
11 kV isolator, Double break 400 A, 25 KA complete set (Reverse Loop Type contacts ) with Terminals suitable for coyote conductor
Beams out of Galvanised iron channel of size 100 x 50 mm with arrangement for stringing power conductor on 11 kV side. 1B2 4.0 Mtr. long with clamps, bolts and nuts(0.036x16=0.576) ( MWSR 01.06.19 Pag...
Galavanised Bolt and Nuts at 5 percent of the total weight of the Station Structure((0.576)X 0.05=0.0288)
Busbar and related Hardwares: Single Tension string of 90KN, Using 2 Units each along with hardware suitable for Drake ACSR Stack.
Single Tension string of 90KN, Using 1 Units each along with hardware suitable for Coyote ACSR.
Single Suspension string Using 2 Units of each 11kV 90KN Disc insulator along with bolted type suspension clamp and hardware suitable for Drake ACSR Stack.
Pad clamps Coyote/Rabbit
fire wedge connector suitable for Coyote - Drake
fire wedge connector suitable for Coyote - Coyote
Drake ACSR conductor
Coyote ACSR conductor
Earth Bond 450 mm Long
PVC insulated Copper Control Cable with Lugs / Ferrules. 1.1 kV class. Size of cable.
19 Core 2.5 Sq.mm. ( Remote control)
4 Core 6.0 Sq.mm( CT PT)
2 Core 6 Sq mm ( AC DC)
4 Core 10 Sq.mm( Out door PT DB)
2 Core 10 Sq mm( Outdoor DC DB)
PVC Materials PVC Pipe 150mm dia for control cable
PVC Bend 150 mm dia
Outdoor panel box: DC Distribution Box (outdoor type): Having provision extending DC supply to one bank, 6 feeders, 1 capacitor bank with provision of one I/C of 100 amps MCCBs and 8 O/G of 16 Amps MC...
PT Distribution Box (outdoor type): Having provision extending PT supply to one bank, 6 feeders, 1 capacitor bank with provision of one I/C of 100 amps MCCB and 8 O/G of 10 Amps MCBs and fuse control ...
Earthing : Earthing name plates for new earting pits
SCADA Portion -10core 1.5 Sq.mm armoured control cable for DO
10core 0.5 Sq.mm armoured COM cable for communication and DI
2.5 Sq.mm multi strand copper wire with Red, Yellow, Blue AND Black colour for PT termination
1.5 Sq.mm multi strand copper wire Grey colour for DI and DO interface wiring
2.5 Sq.mm multi strand copper wire with Red, Yellow and Blue colour for CT termination
Multi-functional Transducer
CKT4U TBs (Fuse link TBs) for PT and DO
Cable gland (19mm)
Cable gland (25mm)
labour Portion for providing 2 Nos of 11kV PCVC Feeder Switchgear for additional feeders at 66/11kV Substation, Chandakavadi in Chamarajanagara TL&SS Division
Switchgear : 11KV PCVCB Switchgear: 350MVA,20kA, 800 A feeder, 20 kA,200-100/1-1 A CTs and ETV Meter with 0.2 acc class
Annunciatior panel suitable for 4 no of feeder
Lightning Arrestors : 9 kV, 10 kA Lightning Arrestor (Metal oxide type) for outgoing 11kV lines and station auxillary transformer
11 kV Double pole structure : RCC Poles: 9Mtr Long 150kg Working load for 11kv Outgoing DP Structure.
DP Sets/Two pole structure kit (Galvanised iron) (Excluding GST)
H-Frame set for mounting 400A S/B GOS. (GI)
11 kV isolator, Single break Roaster GOS 400 A, 25 KA capacity
11 kV ODS : 11 kV ODS structure Column out of 9.5 Mtr. Long RCC pole for 300 Kgs. Working load for 11 kV ODS
11 kV isolator, Double break 400 A, 25 KA complete set (Reverse Loop Type contacts ) with Terminals suitable for coyote conductor
Beams out of Galvanised iron channel of size 100 x 50 mm with arrangement for stringing power conductor on 11 kV side. 1B2 4.0 Mtr. long with clamps, bolts and nuts(0.036x16=0.576) * ( MWSR 01.06.19 ...
Formation of main bus / cross bus with Single drake conductor
Formation of Cross bus with Single Coyote
PVC insulated Copper Control Cable with Lugs / Ferrules. 1.1 kV class. Size of cable.
19 Core 2.5 Sq.mm. ( Remote control)
4 Core 6.0 Sq.mm. ( CT PT)
2 Core 6 Sq mm ( AC DC)
4 Core 10 Sq.mm. ( Out door PT DB)
2 Core 10 Sq mm ( Outdoor DC DB)
Earthing:Grounding of equipment with 50 x 6 mm G.I. Flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes...
Grounding of equipments by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metres long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron wel...
Supplying & Providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc.,
Earthing name plates for new earting pits
11KV PCVCB Switchgear: 350MVA,20kA, 800 A feeder, 20 kA,200-100/1-1 A CTs and ETV Meter with 0.2 acc class
Annunciatior panel suitable for 4 no of feeder
Civil Portion for providing 2 Nos of 11kV PCVC Feeder Switchgear for additional feeders at 66/11kV Substation, Chandakavadi in Chamarajanagara TL&SS Division
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of app...
Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site i...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Material Portion for Providing 2 nos of additional 11kV PCVCB switchgears for Load Bifurcation of Y Operated feeders at 66/11kV GV Gudi, Substation, S.R.S Hootagally Nodal Center, TL&SS Division Hootagally Mysore
11 kV CTs - 200-100/1-1 A (for feeders of 500 MVA SWG)
Erection of CTs and PTs and wiring including movement from the point of unloading to the point of erection.+ Assisting in Testing and Commissioni...
RCC Poles :9.5 metre Long 300 kg working load for ODS
Fabrication, galvanising and supply of High tensile
steel tower materials
for Beam out of Channel 100 x 50 with arrangements for stringing power conductor on 11 kV side (including bolts & nuts)
11KV 90KN disc insulator
Drake conductor
Coyote conductor
Bolted type tension clamp for Single Drake ACSR Conductor 120 kN, 20 mm
Bolted type tension clamp for Single Coyote ACSR Conductor 70/90 kN, 16 mm
C - Type Wedge Connectors Drake to Drake ACSR Conductor
C - Type Wedge Connectors Drake to coyote ACSR Conductor
C - Type Wedge Connectors Coyote to coyote ACSR Conductor
11kV Polymeric Disc Insulator 120kN suitable for Coyote Conductors
Pad clamp coyote
11KV CT Clamps for Single Coyote
9kV,10KA Lightning areestor ( Metal oxide)
11 kV, 400 Amps Double Break GOS
H frame for mouting GOS Set ( GI )
DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL
H frame for mouting GOS Set ( GI )
1.1 kV class Armoured Copper Cables :
Supply of 19 Core 2.5 Sqmm Copper Control Cable
1.1 kV class Armoured Copper Cables :
Supply of 4 Core 2.5 Sqmm Copper Control Cables for AC DC Extension to both control panels from ACDC and DCDB
1.1 kV class Armoured Copper Cables :
4 Core 10 Sq mm Copper cable with glands/lugs/ferrules
1) Out Door ACDB- 200Mtr
2) Outdoor DCDB-200Mtr
3) Outdoor PTDB- 200Mtr
4) From CT to CR panel-150 mtrs
Grounding of equipment's by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 mts long with 2 part clamp out of G.I Flat 50x6mm continuously welded around the pipe using cast iron welding el...
Supplying and providing 450mm dia 450mm height 1.5 to 2" thick hume pipe collar for earth pits including all lead lift etc.
Ferrules, glands & lugs of different sizes 2,5/4/6/10/16/35 sq mm
PVC Pipe 110mm, Bends & T s of Different sizes ( For CT Wiring )
Copper Eath Bond 450 mm long
PVC Insulation Tapes19 mm wide and in rolls of 10 Mtrs
Multi Function Transducers(MFT)
As per KPTCL Std, Interface: RS-485 Daisy Chain to RTU Com port,wiring: Both 3ph 4wire, supply: self powered, Measuring range voltage: 120%, current: 120%, frequency: 4...
Input Vtg:110V DC, input indicated by LED, input range 110VDC to 140V DC, sourcing Vtg output 48VDC, No of iputs: 12, No of outputs: 8, Source current: 5mA, at output, 8way switch to be p...
Terminal Blocks (knife type)
(8 TB's per Feeder) = (8x4 nos = 32)
Current Cable - 2.5 Sq-mm multistrand copper wire for CT termination
(Each color 15mtrs-R-Y-B)
(15mts x 3 x 4 feeder = 180mtr
Voltage Cable - 2.5 Sq-mm multistrand copper wire for PT termination
(Each color 5mtrs-R-Y-B-N)
(5mts x 4 x 4 feeder = 80mtr)
Control Cable - 10 Copper core x 1.5sqmm
(From remote contol desk to RTU)
(15mtrs x 2 nos (1 cable for 2 feeders) = mtrs)
Signal Cable - 10 Copper core x 0.5sqmm
Feeder to Feeder loop = 15mts x 4 nos =60mtrs)
for DI wiring = 15mtsX4=60mtrs
1.5 Sqmm Grey wire for interfacing of DI and DO
(20 mtrs for each panel)(20x4=80mtr)
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the size 2.5 sqmm
(50 lugs/panel x 4= 200)
C-type channel of size 50x100x50x6mm
(50cm/panel) = (0.5m x 4 nos = 2Mtrs)
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)
(Size: 32mm dia)
CT TBs - 6 nos for each panel
Labour portion for Providing 2 nos of additional 11kV PCVCB switchgears for Load Bifurcation of Y Operated feeders at 66/11kV GV Gudi, Substation, S.R.S Hootagally Nodal Center, TL&SS Division Hootagally Mysore
11 kV PCVCB, 500 MVA, 25 kA- Feeder Panel with Scada compatiable With CTs and other accessories Testing & Commissioning: Wiring:Identification of wires, Ferruling, Crimping & Termination of wires for ...
Annunciator Panel for the following combinations Supply & Erection & Testing and commissioning of switch gear
11 kV CTs - 200-100/1-1 A (for feeders of 500 MVA SWG) Erection of CTs and PTs and wiring including movement from the point of unloading to the point of erection and Assisting in Testing and Commissi...
RCC Poles :9.5 metre Long 300 kg working load for ODS
Fabrication, galvanising and supply of High tensile steel tower materialsfor Beam out of Channel 100 x 50 with arrangements for stringing power conductor on 11 kV side (including bolts & nuts)1B2 4.00...
9kV,10KA Lightning areestor ( Metal oxide)
11 kV, 400 Amps Double Break GOS
H frame for mouting GOS Set ( GI )
Busbar Formation -Main bus/cross bus (all the three phases in a segment) using Falcon/Drake/Lynx/Coyote single/double conductors with fixing of insulator spacers, levelling of string conductors to the...
DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL
H frame for mouting GOS Set ( GI )
1.1 kV class Armoured Copper Cables :Supply of 19 Core 2.5 Sqmm Copper Control Cable
1.1 kV class Armoured Copper Cables :Supply of 4 Core 2.5 Sqmm Copper Control Cables for AC DC Extension to both control panels from ACDC and DCDB
1.1 kV class Armoured Copper Cables - 4 Core 10 Sq mm Copper cable with glands/lugs/ferrules Out Door ACDB- 200Mtr,Outdoor DCDB-200Mtr ,Outdoor PTDB- 200Mtr,From CT to CR panel-150 mtrs
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness 2.75 mts long with 2 part clamp out of G.I Flat 50x6mm continuously welded around the pipe using cast iron welding ele...
Grounding of equipment with 50x6mm GI flat and connecting to earth pit/earth mat. Each point of earthing with all formation like bending,twisting,drilling holes and connecting by welding ( Inclusive o...
11kV DP Base concreteing with CC 1:4:8 - Pole based for 9mtrs square pole (650x650x150 mm)Pole concreting with CC 1:2:4 (without coping) - 9 mtrs Square pole (650x650x1700 mm) Providing coping for pol...
Earth work excavation for laying of UG cable in open ground and beneath the road surface in the following strata of soil by mechanical/manual means deposition of earth/rock on bank with all leads and ...
Back filling the cable trench with selected available ridded earth from the trench excavation & consolidating with ramming in successive layers of 15 cm thickness, watering wherever necessary, achievi...
Loading at store and unloading a) 11kv switchgear panel 5.368 MT,b) Control Cable 1 MT,c) CI Pipe for Earthing 0.4MT, d) Annouciator panel 0.2MT, e) Current Transformer 0.5MT,f) Other Hardwares 1 MT...
Transportation of material availed from Store to site charges
Heavy Mazdoor for Removing Jelly and respreading the same at the work spot 2 Days 2 Person
Multi Function Transducers(MFT) As per KPTCL Std, Interface RS-485 Daisy Chain to RTU Com port,wiring Both 3ph 4wire, supply self powered, Measuring range voltage120 percent, current 120 Percent , fre...
Opto Coupler Input Vtg110V DC, input indicated by LED, input range 110VDC to 140V DC, sourcing Vtg output 48VDC, No of iputs 12, No of outputs 8, Source current 5mA, at output, 8way switch to be provi...
Control Cable - 10 Copper core x 1.5sqmm (From remote contol desk to RTU) (15mtrs x 2 nos (1 cable for 2 feeders) = mtrs)
Signal Cable - 10 Copper core x 0.5sqmm Feeder to Feeder loop = 15mts x 4 nos =60mtrs) for DI wiring = 15mtsX4=60mtrs
CT TBs - 6 nos for each panel (4 x 6 = 24 nos)
Configuration of RTU and Engineering along with validation of data at SLDC
Testing Portion for Providing 2 nos of additional 11kV PCVCB switchgears for Load Bifurcation of Y Operated feeders at 66/11kV GV Gudi, Substation, S.R.S Hootagally Nodal Center, TL&SS Division Hootagally Mysore
11 kV PCVCB, 500 MVA, 25 kA
Feeder Panel with Scada compatiable With CT's and other accessories.
Testing & Commissioning:
Identification of wires, Ferruling, Crimping & Termination of wires fo...
Annunciator Panel for the following combinations
Supply & Erection & Testing and commissioning
11 kV CTs - 200-100/1-1 A (for feeders of 500 MVA SWG)
Erection of CTs and PTs and wiring including movement from the point of unloading to the point of erection.+ Assisting in Testing and Commissioni...
Civil Portion for Providing 2 nos of additional 11kV PCVCB switchgears for Load Bifurcation of Y Operated feeders at 66/11kV GV Gudi, Substation, S.R.S Hootagally Nodal Center, TL&SS Division Hootagally Mysore
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site i...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT.pdf
Instructions to Tenderers • 0.27 MB
SCC TNP.docx
Tender Document • 0.05 MB
volume iia 2 of 2.doc
Tender Document • 2.87 MB
IFB.pdf
Tender Submission Guidelines • 0.73 MB
ECC.docx
Tender Document • 0.04 MB
technocom_sheet.xls
Techno-Commercial Worksheet • 0.03 MB
Y Operation Abstract CSR23.pdf
Others - AMOUNT PUT TO TENDER • 0.48 MB
volume iia 1of 2.doc
Tender Document • 3.57 MB
GCC.docx
Tender Document • 0.05 MB
volume iib.doc
Tender Document • 1.21 MB
work on hand details.doc
Techno-Commercial Worksheet • 0.06 MB
ITB.pdf
Instructions to Tenderers • 0.80 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .