Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.8 LAccepted-AOC | L1 | Accepted-AOC Lowest bid. | |
| 2 | L2₹40.0 L+₹3.7 L (10.2%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bid. | |
| 3 | L3₹40.6 L+₹4.3 L (12.0%)Rejected-Finance M S WALIA TRADING CO VILLAGE VASUDEVPURA NALAGARH ROAD VILLAGE VASUDEVPURA PINJORE HARYANA 134102 | PANCHKULA | HARYANA | 134102 | L3 | Rejected-Finance Other than lowest bid. | |
| 4 | L4₹40.7 L+₹4.4 L (12.2%)Rejected-Finance H NO B III 95 MOHALLA GHARTHOLI MISSION ROAD PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L4 | Rejected-Finance Other than lowest bid. | |
| 5 | L5₹40.7 L+₹4.4 L (12.2%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bid. |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
13 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (South) Mamun
GE (South) Mamun, Mil Stn Mamun, Pathankot
As Specified in BOQ and Tender Documents
2024_MES_660051_1
GE(S)/M-14/2024-25
Open Tender
Civil Works
Item Rate
270 days
Mamun Pathankot
As per NIT
10 documents required · 10 mandatory
₹500
GE (South) Mamun
₹90,000
Yes
GE (South) Mamun, Mil Stn Mamun, Pathankot
16 Oct 2024
15 Jun 2024
22 Jul 2024
15 Jun 2024
13 Jul 2024
30 Jun 2024
15 Jun 2024 - 21 Jun 2024
22 Jun 2024
Amount
Taking down cement plaster from brick/stone walls / concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Demolition of cement concrete (unreinforced) or tiling etc in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Dismantling of old stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frame) area not exc. 1.5 Sqm each, complete all as specified and directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frame) area exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified and directed.
Taking down shutters of any description area exc. 1 sqm and not exc. 2 Sqm each, complete all as specified & directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones exc 1.5 Sqm complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for removing existing roof treatment (any type) by picking, sweeping/brushing clean and washing down with water to remove dust and applying neat cement slurry @ 3.0 kg of cement per sqm complete all as specified and directed.
M&L for rendering 10 mm thick plaster in cement mortar 1:6 on fair face of brick work or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar 1:4 on brick work or concrete surfaces of wall, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for brick work with fly ash bricks, old size, as in half thick brick walls, straight or curved on plan exc 6 mtr mean radius built in CM (1:4) complete all as specified and directed.
M&L for brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specifiedand directed.
M&L for non-skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm in floor etc, set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match, laid over and including 15mm thick cement screed in cement mortar 1:6, complete all as specified and directed .
M&L for non-skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm as in skirting etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match, laid over and including 10mm thick cement screed in cement mortar 1:4, complete all as specified and directed.
M&L for Vitrified ceremic tiles, polished, light shade, 8 to 9mm thick (Square/rectangular) area of each tile not exceeding 0.36 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar 1:6, complete all as specified & directed.
M&L for glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, etc., set and jointed in neat cement slurry and pointed with coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.
M&L for cement concrete 1:5:10 type D-2 (using 40mm graded crushed stone aggregate as in mass filling in sunken floors of kitchens/toilets, complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in sub base of floors, finished even & rough to receive floor top finish complete all as specified and directed.
M&L for Machine Pressed precast concrete interlocking paver block any shape and size as approved M-35 Grade, 60mm thick confirming to IS-15658-2006 with grey cement and pigments complete all as specified & directed.
M&L for Sand filling as sand cushion under paver blocks using clean graded fine sand including levelling watering & compacting to required gradient complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching, floor by maintaining required gradient / undulation etc slightly rounded or chamferred angles and throating, complete all as specified and directed.
M&L for Machine pressed precast coloured chequered cement concrete tiles of size 30cm X 30cm X 25mm thick, set, jointed & pointed in neat cement slurry with grey cement and pigment to match as in floors laid over and including 15mm thick screed bed or bedding layers in CM 1:6, including dismantling existing floor, hearth or wall tiling of any description, complete all as specified and directed.
S&F Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe and fixed refixing of inlet, outlet & over flow pipe etc. (Minimum weight of 20mm ball valve - 210 gms including dismantling of old broken water tank complete all as specified and as directed.
S&F pressed steel frames of size 125mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately.
S&F Pressed steel frames of size 105mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate., complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately.
M&L for preparation of new or previously untreated steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with statinless steel wire staples complete all as specified and directed.
S&F 35mm thick factory made 2nd class hard wood plain, framed, panelled door shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified & directed.
S&F 35mm thick 2nd class hard wood, glazed and skeleton door shutters, factory made, open rebated and prepared to receive glass or gauge etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I, complete all as specified & directed.
M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast / lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge and manufacturer's instructions. Note:- M.S. hold fast/ lugs fasteners shall be measured & paid for separately.
S&F factory made single extruded WPC (Wood Polymer Composit) solid decorative flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) having minimum density of 650kg/cum, and screw withdrwal strenght of 1800N (face), 900n (edge), minimum compressive strength 50 N/Sqmm , modulas of elasticity 850N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retrdant and fixing with stainless steel butt hinges of rerquired size with necessary full body threaded star headed counter sunk SS screws all as specified and directed . Note :- i) stainless steel butt hinges and necessary SS screws shall be measured & paid separately). ii) Material manufactured by MES approved firms / ISI approved firms shall only be used in the work. IS certificate alongwith MTC to be produced before execution of work.
S&F aluminium, anodised, barrel tower bolts of extruded section, length of bolt 150 mm and fixed complete all as specified and directed.
S&F aluminium alloy, anodised, sliding door bolt 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed, complete all as specified and directed.
S&F stainless steel butt hinge 100 mm long medium weight and fixed complete all as specified.
S&F aluminium handle, anodised of extruded section, 150 mm size and fixed complete all as specified and directed.
S&F in repair 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame complete all as specified and directed.
S&F in repair 4 mm thick sheet glass ordinary quality and glazing with oil putty in square exc. 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame complete all as specified and directed.
S&F in repair steel water tubing 15 mm bore medium grade galvanised, with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors including taking up or down existing tubing complete all as specified and directed.
S&F in repair steel water tubing 20 mm bore medium grade galvanised, with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors including taking up or down existing tubing complete all as specified and directed.
S&F in repairs CP Brass shower rose 200x200 mm size with brass chromium plated flexible arm 450-550mm long complete all as specified and directed.
S&F in repairs Stop valve/Angle valve (ISI Marked), fancy type cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore ccomplete all as specified and directed.
S&F in repairs Stop valve (ISI Marked) fancy type, chromium plated cast copper alloy with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore and fixed complete all as specified and directed.
S&F in repairs bib tap 15 mm bore long body, Brass CP, fancy type (long shank), with crutch or butterfly handle screwed down, screwed for iron/PVC pipe or for brass ferrule and fixed, complete all as specified and directed.
S&F in repairs Vitreous china wash basin, oval shape, counter top, white, size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but inclluding vitreous china pedestal and PVC waste pipe with union, 32 mm dia complete all as specified and directed.
S&F in repairs 15mm bore pillar tap cast copper alloy with capstan head, chromium plated fancy type screwed down high pressure with or without lettered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe or check nuts 15mm bore complete all as specified and directed
S&F in repair Centre hole basin mixer chromium plated without popup waste system with 450mm long braided hoses cast copper alloy for iron pipes 15 mm bore, screwed for iron pipe and fixed and all as specified and directed.
S&F in repair wall mixer chromium plated without popup waste system with 450mm long braided hoses cast copper alloy for iron pipes 15 mm bore, screwed for iron pipe and fixed and all as specified and directed.
S&F in repairs, Vitreous china squatting pan of pattern, long pan, 'Orissa pattern', size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision of concrete bedding, CI floor trap etc complete all as specified and directed.
S&F in repair Vitreous china wash down water closet pan (Pedestal pattern) white (excl fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device complete all as specified and directed.
S&F in repair, plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device for pedestal pattern WC, black/ white colour complete all as specified and directed .
S&F in repairs PVC flushing cistern, 10 litre capacity, low level, push botton type dual flush type, PVC valveless, syphonic action type, white, with inlet, ball valve, float and handle incl brackets & flush pipe PVC 32 mm dia complete all as specified and directed.
S&F in repairs Jet Spray (with 1.50 Mtr tube), fixed to EWC and angular stop cock/valve, complete all as specified and directed.
S&F in repair health faucet with 8 mm dia,1.2 m long Rubber flexible tube with Chromium plated spring type cover & Wall Hook for water closet complete all as specified and directed.
S&F PVC connection 15 mm bore with PTMT nuts of length 600 mm long complete all as specified and directed.
S&F in repairs 32 mm dia, corrugated waste pipe suitable for WHBs/sinks including threaded PVC socket suitable for shank of waste coupling complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:3:6, type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth using extra cement including necessary joint filling with mixture of paving bitumen & sand in 1:3 complete all as specified and directed.
M&L for preparation of old surfaces of walls of any description including washing down, rubbing, brooming down with wire brush, scrapping down smoke, roots, moulds, salts and treading oil and greasy spots, including taking down existing grass, vegetation, small trees and making good the disturbed surface with cement mortar 1:3 and applying one coat of cement based paint, white or tinted including curing before & after paint complete all as specified and directed.
M&L for preparation of old surfaces of walls of any description including washing down, rubbing, brooming down with wire brush, scrapping down smoke, roots, moulds, salts and treading oil and greasy spots, and applying one coat of oil emulsion distamper, white or tinted including removing nails etc and making good the disturbed surface complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper, white or tinted shade including priming surface with chalk whitening, complete all as specified and directed.
M&L for preparation of newly plastered external surfaces of walls and applying two coats of cement based paint, white or tinted including curing before and after paint complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of white wash complete all as specified and directed.
Supply only Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed all as specified and directed.
M&L for taking down carefully existing rolling shutters any type, easing, adjusting and carrying out necessary repairs by replacing old unservicieable parts, greasing, oiling and necessary welding for its smooth functioning complete and re-erecting the same in old position complete all as specified and directed. Note: Parts shall be measured and paid for separately.
S&F ball bearing for rolling shutters complete all as specified and directed.
S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. having minimum thickness of powder coating 50 micron complete all as specified and directed.
S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
M&L for 20mm thick rendering in CM 1:4 on roof top on brickwork or concrete surfaces, finished the surface even and smooth without using extra cement, mixing with and including WPC @ 200ml/bag of cement after sweeping/brushing clean and washing down with water complete all as specified and directed.
M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjas / canopy / parapet wall, to be executed through approved applicator of the membrane manufactured with following specifications, complete all as specified and directed :- (a) Cleaning the top surface of RCC roofing properly with water. (b) Applying oil bound bitumen primer @ 0.30 Litre / Sqm, manufactured by the same agency as that of APP with a density 0.87-0.89 KG / Litre at 25 degree centigrade on prepared surface. (c) Laying of membrane not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 KG/Sqm reinforced with non woven polyster fiber weight not less than 160 Gms/Sqm using butane torch by torch application with 10cm overlap and 15cm end lap. (d) Top of membrane shall be provided with solar reflective bituminous aluminum paint @ 0.10 KG / Sqm as prescribed by manufacturer of membrane. (e) APP Membrane shall be stick inside parapet where available by chase cutting and sealed with PCC 1:2:4, type B-0. (f) Top of membrane shall be provided with solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.
M&l for Machine cut Kota stone slab flooring not less than 18-20 mm thick (size of stone shall not less than 55cmx55cm), laid over & including 15 mm thick screed base in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing machine, complete all as specified and directed.
S&F pre-laminated lead free factory made 18mm (+/- 0.7mm) thick 100% solid WPC (wood polymer composite) sheet having high natural fibre content 25 to 30% wood colour sheets having density not less than 600Kg/cbm and should be 100% termite/water proof, fire retardant, Eco friendly, finish at all edges for making edges lipping/bending, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness complete all as specified and directed. Note:- (i) Material manufactured by MES approved firms / ISI approved firms shall only be used in the work. IS certificate alongwith MTC to be produced before execution of work, in case ISI approved firm material is approved.
S&F continuous (piano) hinges, mild steel, bright finish width of flaps (when open) 30 mm complete all as specified and directed.
S&F hasp and staple 100 mm in size, aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F ball catcher with proper magnetic effect fixed with shutter, complete all as specified and directed.
M&L for cement concrete 1:3:6, type C-1 using 20mm graded stone aggregate as in filling of hollows of back of chowkats complete all as specified and directed.
Alishan Builders (BID ID -3060542)
Walia trading co (BID ID -3052234)
M/S HIMANSHU BUILDERS (BID ID -3052181)
Abrol construction co (BID ID -3060772)
VISHNU DUTT AGANIHOTRI & SONS (BID ID -3060403)
WALIA ENTERPRISES (BID ID -3052038)
TARA CONSTRUCTIONS (BID ID -3051171)
Bidder Name
TARA CONSTRUCTIONS
Abrol construction co
Walia trading co
WALIA ENTERPRISES
Alishan Builders
M/S HIMANSHU BUILDERS
VISHNU DUTT AGANIHOTRI & SONS
BRIGHT BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .