Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.7 LAccepted-AOC 1074 BAGYALAKSHMI STREET VENKATESAPURAM ARAKKONAM 631002 | ARAKKONAM | RANIPET | TAMIL NADU | 631002 | L1 | Accepted-AOC ACCEPTED BEING L1 | |
| 2 | L2₹28.7 L+₹3.8 L (15.2%)Rejected-AOC 2 RC ENTERPRISES NEAR AGRASEN BHAWAN BHATAPARA CHHATTISGARH LINK ROAD BALODA BAZAR RAIPUR CHHATTISGARH 493118 | BALODA BAZAR | CHHATTISGARH | 493118 | L2 | Rejected-AOC REJECTED DUE TO NOT BEING L1 | |
| 3 | L3₹29.2 L+₹4.3 L (17.4%)Rejected-AOC | L3 | Rejected-AOC REJECTED DUE TO NOT BEING L1 |
Tender Value
₹30.2 L
EMD Value
₹60,400
Closing Date
11 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer M NAS Arakkonam
Garrison Engineer M NAS Arakkonam 631006
MAINTENANCE OF SWIMMING POOL INSTALLATION UNDER GE M ARAKKONAM
2024_MES_674315_1
8419E8
Open Tender
Civil Works
Item Rate
330 days
Garrison Engineer M NAS Arakkonam
AS PER NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer M NAS Arakkonam
₹60,400
Yes
5 Nov 2024
13 Sept 2024
14 Oct 2024
13 Sept 2024
11 Oct 2024
27 Sept 2024
Amount
Material and labour for taking down Monoblock pump set 10 HP capacity, transporting to private work shop, dismantling the pump set removing carefully the damaged/burnt out winding from slot, cleaning the slots with CTC and rewinding the same with new super enamelled copper winding wire of existing gauge and turns, including metalling the worn out shaft and replacement of bearings, gun metal bush, gland flange, gland rope, studs, bolt , nuts with washers and terminal plate, cooling fan with MS cover,oiling and greasing and refixing back into position for making motor fully functional and testing for satisfactory running complete all as specified and as directed.
Material and labour for taking down the motor 7.5 HP capacity from Air compressor, transporting to private work shop, dismantling the motor removing carefully damaged/burnt out winding from slot, cleaning the slots with CTC and rewinding the same with new super enamelled copper winding wire of existing gauge and turns, including metalling the worn out shaft and replacement of bearings, coupling, studs, bolt ,nuts with washers and terminal plate, cooling fan with ,oiling and greasing and refixing back into position for making motor fully functional and testing for satisfactory running complete all as specified and as directed.
Material and labour for taking down the motor 5 HP capacity from sliding pump set, transporting to private work shop, dismantling the motor removing carefully damaged/burnt out winding from slot, cleaning the slots with CTC and rewinding the same with new super enamelled copper winding wire of existing gauge and turns, including metalling the worn out shaft and replacement of bearings, rubber coupling, studs, bolt ,nuts with washers and terminal plate, cooling fan with MS cover,oiling and greasing and fixing back into position for making motor fully functional and testing for satisfactory running complete all as specified and as directed.
Material and labour for taking down the motor 3 HP capacity from suction sweeper trolly, transporting to private work shop, dismantling the motor removing carefully damaged/burnt out winding from slot, cleaning the slots with CTC and rewinding the same with new super enamelled copper winding wire of existing gauge and turns, including metalling the worn out shaft and replacement of bearings, rubber coupling, studs, bolt, nuts with washers and terminal plate,oiling and greasing and fixing back into position for making motor fully functional and testing for satisfactory running complete all as specified and as directed.
Taking out the existing Star-delta starter from panel, cleaning the electronic parts from inside, replacing the OLR, Contactor, NVC, connecting link wires etc of the upto 10 HP capacity motor complete all as specified and as directed.
Taking out the existing DOL starter upto 5 HP capacity motor from panel , cleaning the electronic parts from inside, replacing the OLR, Contactor, NVC complete all as specified and as directed.
M&L for taking down the compressor unit from the air compressor , carrying out repairs, reconditioning of rotating parts, replacing of filters and lubricants reassembling into position by using new suitable rubber packing including studs, flanges, bolts and nuts etc., for fully functional, applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, testing for satisfactory running complete all as specified
Material and labour for cleaning the underground makeup sump of capacity 100000 Ltrs by dewatering the sump using pumps removing the silt/sludge deposited at bottom, walls complete, cleaning the sump internally using high pressure water jets upto 120 bar pressure followed by vacum cleaning including white washing with one coat of lime to the internal/outer surface of the tank,including removing green vegetation around the sump including Writing the capacity of sump,date of cleaning and next due date by using synethetic enamel paint of approved tint over a coat of black paint base of size 50cmx30cm all as specified .
Supply and fix in repairs/ replacement of Wall mount type Gravity feed Gas Chlorinator of capacity 500gms/hr made of high quality PVC material all as specified and as directed.
Supply only following items of reputed make suitable for gravity flow gaseous Chlorination plant of capacity 200 to 500 gms/hr.
a) Primary filter
b) Secondary filter
c) Mixing chamber
d) Diaphram type in let/out let valve
e) Pressure gauge with teflon seal
f) Teflon heavy duty pipe connection to chlorine cylinder including PVC nuts at both the ends
g) Solutioner outlet
h) PVC 'T' for water connection
i) Air release valve 15mm dia
j) PVC braided hose 25 mm dia
k) U type safety bend
l) PVC gas bend with NRV
m) Flow meter capacity upto 2 kg /hour
n) Orifice glass tube with NRV
o) Moisture glass tube with nuts
p) Glass NRV valve
q) PVC heavy duty ball valve inlet/outlet 15mm dia
Note :- Labour cost for fixing above items are deemed to be included in the rate quoted for item above
Maintenance and servicing of chloronome plants of any type and make at the following installations including necessary tools and safety equipments for service/maintenance and including S&F minor spares required for repair/replacement to maintain serviceability of chlorine plant all as specified and as directed. Note: Spares/items required for replacing the defective one shall be provided by the contractor as required at site and the same will be measurered and paid separately under respective items of schedule as supply only. however labour cost for fixing of spares to be included in the rate quoted for item 11. If any break down occurs/chlorine gas leakage found the contractor has to repair/rectify the fault within 24 hrs after receipt of complaints, incase if they failed to rectify the fault, penalty will be charged at Rs.1500 per day after 24 hrs and the shall be recovered from the contractor during RAR payment.
a). Main Pump house(MRS pump House) capacity of 0-500 gms/hr (plant No.1)
b). Main Pump House(MRS pump House) capacity of 0-500 gms/hr (plant No.2)
c). Swimming pool plant capacity 0-200gms/hr
Material and labour for repair/replacement of chemical dozing pumps electromagnetic diaphragm type with accessories like anti siphon valve, sucion/discharge tubing of capacity 6 ltrs/hr @ 4 kgs back pressure(ie. Liquid sodium hypochlorite, Liquid Alum,Liquid Soda Ash, Liquid copper sulphate, Liquid Bleaching solution etc) including replacement of unservieable spares and refixing, recommissiong and testing after repair complete all as specified and as directed.
Material and labour for repair/servicing of chemical dozing pumps electrically operated single phase 230V 50Hz(ie. Liquid sodium hypochlorite, Liquid Alum,Liquid Soda Ash, Liquid copper sulphate, Liquid Bleaching solution etc) including replacement of unservieable spares and refixing, recommissiong and testing after repair complete all as specified and as directed.
Note:- i) Make/Specification of pump: Rmco RC-13 capacity
ii) Spares required for servicing shall be measured and paid seperately under respective items as supply only. However labour cost for fixing spare parts to be included in the rate quoted.
Supply only following items of reputed make suitable for chemical dozing pumps
a) Injection/check valve non metallic
b) Chemical level sensing automatic shut down switch
c) Suction valve/foot valve Non-metallic
d) Special flexible nylon suction tubing 10 mm dia to with stand water pressure minimum 10Kg / square cm
e) PCB for chemical dozing pump
f) Control valve for chemical dozing pumps
g) NRV assembly for chemical dozing pumps
h) Ceramic ball
j) PVC container of capacity100 litrs for chemicals
Taking down of existing unserviceable butterfly valve of size 200mm dia from the existing position & S&F ISI marked heavy duty flanged ends (ISI marked) as specified including nuts ,bolt, washers and gasket etc., Make : Make:Leader / Kirloskar Zoloto / Upatyaya /Audco
Taking down existing unserviceable sluice valve from the existing pipe line and supply and fix for sluice valve CI body ISI marked class PN 1.6 heavy duty flanged ends cast iron wheel with SS spindle (ISI marked) conforming to IS:14786-2000, short body including nuts, bolts, washers and gasket complete all as specified and as directed.
a) 150 mm dia
b) 200 mm dia
Material and labour for preparation of old painted steel surfaces of MS pipe of following sizes and applying a coat of 1st quality synthetic enamel paint of approved tint complete all as specified and directed.
a) MS pipe of dia 100mm
b) MS pipe of dia 200mm
c) MS pipe of dia 300mm
Supply only following items of reputed make for treatment of water .
a) Bleaching powder
b) Alum in crystal
b) Liquid Alum gel
c) Soda Ash
d) Copper sulphate
e) Chlorine Water Quality Test Kit
f) OTO solution, 500ml bottle
g) Phenol red solution, 500ml bottle
h) Digital pH meter
Supply only Chlorine in the form of TCCA-90 (Trichloroisocyanuric Acid ) granular used as a disinfecting agent in swimming pool for achieving sparkling clean and clear water.purity of 99% to provides long term effects throughout the month in keeping swimming pools free from bacteria anf algae with no side effects on skin,hair and eye etc.complete all as specified and as directed.
Material and labour for repairing/Servicing of Automatic distilled water plant of capacity 500 Ltrs/hrs by replacing filter media, membrane etc., and make it fully functional including replacement of unserviceable spares and refixing, recommissiong and testing after repair complete all as specified and as directed.
Supply only Chlorine gas for treatment of water at Main pump House and Swimming pool from M/s Tamilnadu petrolieum products limited Manali, Chennai , Karwar, M/S Tranvancore Cochin Chemical Ltd, Cochin, M/s Centrury Rayan Ltd, Mumbai, M/s Chemplast, Metturdam (or) Through their authorised dealers complete all as specified and as directed. Note: Empty Chlorine cylinder will be issued by the department for filling gas.Transportation,handling, fixing and removing in chlorination plants with safety as per IS safety norms, shall be the responsibility of the contractor. The cylinders are subjected to Hydrostatic stretch test at pressutre of 30 kg/sqcm as required under rule-35 of the gas cylinders rules 2004, Filling ratio should not exceed 1:19 for the chlorine of the water capacity of the each container by weight. The contractor shall be responsible for safe handling, safe storing, safe transportation on explosive licenced special vehicle with caution/ safety notice board affixed on both sides of the truck. The contractor shall be resposible for all claims, counter claims, on event of any mishap occuring directly or indirectly during transit and while stocking at site. Contractor shall produce all statutory certificates as required by the statutory authorities of Tamilnadu petroproducts and Govt of india petrolieum explosive of the organization. The rate quoted by the tenderer shall be inclusive of the above provision. No additional/extra payment on this account is admissible.
Carrying out hydraulic pressure test of empty chlorine gas cylinder at pressure of 30 Kg/sqcm as per gas rule No. 35 of gas cylinder rule 2004 including washing, cleaning,dazzling,painting including supply and replacing of cylinder valve complete all as specified and as directed.
Note: (i). The cylinder will be issued by the department for refilling of gas cylinder shall be tested and refilled. (ii) Chlorine gas shall be measured and paid separately under respective items mentioned here-in-after. (iii). Hydraulic pressure test certificate shall be produced by the contractor to the department for record.
Supply and fix in repairs suction sweeper made up of stainless steel metal of 10 X 36 inch and 0.5 mm thickness fitted with wooden brush with Poly Bristle along length dimension with necessary fittings like Nylon rope, wheels, spring, flexible wiper of minimum 10mm thickness along with provision for fixing flexible hose, rotating wheel etc., all as specified and directed by Engr-in-charge.
Material and labour for providing Telescopic Poles are constructed of premium drawn aluminium tubing of wall thickness of 1.2mm, the OD and ID are 31.8mm and 29.4mm respectively. Provided comes with vinyl handle and user-friendly grip lock and designed to work with hand skimmers, leaf rakes, brushes and vacuum heads of size 12/24 Feet Telescopic Pole with 2 Section Easy Lock Extend Upto 24 Feet for Swimming Pool all as specified and directed.
Supply and replacement of flexible vacuum hose of dia 38mm and 30m length with Standard Cuff Link , flexibility Heavy Duty, anti tangling all as specified and directed.
Supply and fix in repairs Swimming Pool Deep Leaf Net Skimmer net of size 16" X 19" with provision of connecting the telescopic rod
Supply and fix in repairs 18 Inch Swimming Pool Aluminum Wall Brush with Poly Bristle Pool Cleaning Brush for Maintenance, Heavy-Duty Equipment for Wall and Floor Tile all as specified and directed.
Supply and fix in repairs Curved18 Inch Swimming Pool Aluminum Wall Brush with Poly Bristle Pool Cleaning Brush for Maintenance, Heavy-Duty Equipment for Wall and Floor Tile all as specified and directed.
Supply and fix in repairs 18 Inch Plastic Algae Brush with Stainless Steel bristles for Maintenance, Heavy-Duty Equipment for Wall and Floor Tile all as specified and directed.
rc enterprises (BID ID -3133986)
Green Ray Technologies (BID ID -3128580)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .