SPECIAL REPAIRS TO SERVENT QTRS AT BACKWAY I, II, MARSHAL HOUSE AND MAGDALA HOUSE UNDER GE (WEST) COLABA, MUMBAI.

Amount

Providing and erecting vertical scaffolding with net (debris net), made out of high density polyethylene for dust and debris control and keeping the same during the period of work and including dismantling and taking away after completion of the work all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing the retreived debris out side MD land all as specified and directed.

M&L hard core of broken stone or boulders of gauge not exc 63mm deposited, spread & levelled in layers not exc 15cm thick, including watering and ramming to a true surface all as specified and directed. Note:- Volume of hard core after consolidation will be measured and paid.

M&L PCC 1:11/2:3 (using 20 mm graded crushed stone aggregate) as in flooring, sunkun portion and all other similar works all as specified and directed.

M&L for applying three coats of polyurethane waterproofing paint on new plastered surface all as per manufacturer's instructions for sunken portion all as specified and directed. Make- Asian Paint/ Dr Fixit/ FOSROC

Taking down cement plaster or lime plaster completly on walls /ceiling of any description from concrete or brick wall etc including raking out joints, hacking for key, scrubbing down with water and disposing off the retreived debris out side MD land all as specified and directed.

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height all as specified and directed.

M&L mild steel TMT bars of any dia in stirrups, spaces and binders, cut to length, bent to shape, required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed

M&L hard drawn steel welded wire fabric mesh, 100 x 100 x 3mm dia cut to length, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm dia, supplied anchored over 3 to 4 inch long iron nails at a distance of 0.6 m in both direction and fixed in walls / reinforcement weight not less than 1.37 Kg/Sqm but not exc 4kg per sqm for fixing and for bracing, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it. The rates include for straightening, raking or circular cutting and waste. Rates also include for straightening where reinforcement is supplied in rolls/coil.

Demolition of re-inforced cement concrete (re-inforce cut as required to facilitate demolition) in any position (beam, landing, Chajja and roof slab etc ) ground floor/ other than ground floor, projection of balcony all as specified and directed.

M&L for providing and placing in position micro-concrete, grade M-40, which shall be cement based prepacked single component, chloride free, non-shrink, free flow, self compacting, ready to use after mixing water in specified proportion, obtained from Fosroc / SIKA / BASF/ Dr Fixit, thickness of section upto 75 mm all as specified and as directed by the Engineer in charge Note:- Payment under this item shall be made only after proper wetting the surface with cement slurry mixed with bonding chemical and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument.

M&L for providing and placing in position micro-concrete, grade M-40, modified with aggregate which shall be cement based prepacked single component, chloride free, non-shrink, free flow, self compacting, ready to use after mixing water in specified proportion, obtained from Fosroc / SIKA / BASF/ Dr Fixit, thickness of section more than 75 mm all as specified and directed by the Engineer in charge. Note:- Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument.

Providing and fixing special water tight centering and shuttering including bolting, strutting, propping etc. so as to withstand a pressure of 0.1 Mpa including removal of form work of all locations including beams, columns, slabs, walls, foundations, footings, landings, stairs, balconies etc or in any other similar work all as specified and directed.

M&L for applying pressure guniting / shotcrete in cement mortar 1:4, average thickness 30mm to 50mm, removing loose, disturbed or disintegrated old concrete / brick surfaces of walls, RCC beam, column, lintel, pardi, railing etc, cleaning thoroughly exposed reinforcement, by sand blasting using suitable pump as directed by the GE, preparing exposed concrete surfaces by wetting with cement slurry to receive guniting, applying one coat of anti corrosive paint to the exposed reinforcement, applying pressure guniting in cement mortar 1:4, average thickness 30mm to 50mm and thereafter rendering 10 mm thick plaster in cement mortar 1:4, mixed with water proofing compound in the ratio as per the manufacturer's instructions and finishing the surfaces even and smooth without using extra cement to match with the existing surfaces, removing the debris outside MD land including material and labour and safety arrangement for guniting work all as specified and directed. Note :- (i) The finished level of the surfaces shall be matched with the existing surface. (ii) Provision of additional reinforcement steel in case required and ordered shall be measured and paid separately. (iii) Liquid water proofing compound will be measured and paid seperately as supply only. Make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces all as specified and directed.

Supply only liquid water proofing compound. Make Dr. Fixit or equivalent

M&L for 12-15 MM Thick ready mix plaster in single layer on brick wall/ceiling or concrete surfaces including making groove of appropriate size, on other than fair faces of concrete/brick surfaces (internal surface) and finished even & smooth witjhout using extra cement all as specified and as directed. Name of Manufacturer: M/s ACC acopalst/CK Birla Aerocon/Premier Floor to Roof Materials Pvt. Ltd/ M/s Walplast Products Pvt. Ltd/ M/s Ultratech cement Ltd/M/s Sound buildcare Pvt. Ltd/ or other approved equivalent make.

M&L for 20-25 mm average thick Ready Mix Plaster in multi layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces using liquid water proofing compound all as specified and directed. Note :- Liquid water proofing compound will be measured and paid seperately as supply only.

M&L for elastomeric paints after preparing newly plastered surfaces on external wall surfaces, ceilng, chajjas and other similiar places, preparing the undulated surfaces, filling cracks with approved crack filler applying two coats of water proof acrylic elastomeric paint (Asian paints smart care damp proof advance or equivalent), over a coat of wall primer base coat all as specified and as per manufacturer's instruction. Make : Dr. fixit / Asian Paints or equivalent.

M&L for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of Anti-fungal, Dust resistant, Water repellant, Crack-bridging, weather proof type (Ist quality), Exterior Acrylic Emulsion paint (100% Acrylic) Base coat of Apex ultima of Asian Paints, protek duralife and top coat of Apex Ultima protek, over a coat of "Trucare" exterior wall primer, through authorized applicator only complete all as specified and directed. Make: Asian Paints / Berger Paints ( Weather Coat All Guard) / Nerolac (Excel Top Guard) / Dulux Paints ( Dulux Weather shield Max), sample as approved by GE.

M&L for preparation of newly plastered brick/concrete surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 3mm thick (minimum) Birla white wall care putty including rubbing with sand paper through authorised applicator of paint manufactures only of approved shade all as specified and directed. Make:-"Tractor Uno" of Asian paint/'JAdoo' of Berger paint/ Nerolac beuty of Nerolac paint as approved by GE

M&L for complete removal of existing treatment & preparation of old plastered brick/concrete surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 3mm miinimum thickness Birla wall care putty including rubbing with sand paper through authorised applicator of paint manufactures only of approved shade all as specified and directed. Make:-"Tractor Uno" of Asian paint/'JAdoo' of Berger paint/ Nerolac beuty of Nerolac paint as approved by GE

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises all as specified and directed.

M&L for Ist and premium quality of non skid, joint free, ceramic digital “coloured” matt finish tiles of premium or first quality of size 300 x 300 x 7-8 mm or thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:3 all as specified and directed.

M&L for Ist and premium quality glazed ceramic coloured digital tiles 600 mm x 300 mm or 450 mm x 300 mm x 6 mm to 7 mm thick, in skirting, dados, risers to steps, etc set and jointed in neat cement slurry, and pointed in coloured cement to match the shades of tiles laid over and including 10mm thick rendering or backing layer in cement mortar 1:3 all as specified and directed.

M&L for epoxy grout to fill the wide joints of tiles and pointed in matching colour of epoxy grout ( MYK LATICRETE SP 100 or equivalent) floor and wall tiles all as specified and as directed by Engineer-in-charge.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified & directed.

M&L for granite (of any colour) 20 mm thick machine cut, pre polished, bedded and jointed with grey cement slurry and pointed in white cement with admixure of pigment to match the shade of granite stone as in kitchen platform, flooring , window cill, wall cladding including 15 mm thick screed bedding in cement mortar 1: 4 and all other similar works all as specified and directed.

M & L for Machine cut cudappah stone slab 20-25mm thick laid over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store 15/20 mm dia bore all as specified and directed

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed

M&L for cutting chases, pinning in and making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting nexc. 10cm girth all as specified and directed.

Demolition and breaking up drain pipes 75 mm dia (salt glazed stone ware, AC, PVC or reinforced concrete) set in cement mortar all as specified and directed

Demolition and breaking up drain pipes 110 mm dia (salt glazed stone ware, AC, PVC or reinforced concrete) set in cement mortar all as specified and directed

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls including stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays all as specified and directed.

S&F 75 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls including stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays all as specified and directed.

S&F 16 mm outer diameter CPVC pipes SDR 11 & plain CPVC SDR 11 fittings (including provision of special fittings i.e. brass elbow, brass tee, male brass threaded adaptor, female brass threaded adaptor etc required for fixing of bib tap, stop valve with CPVC pipes) concealed in walls/ ceiling or laying in floors etc. also including cutting chases, grooves and making good the same in CM 1:3 after fixing of pipes / fittings all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (orrisa pattern) white, including trap, connection to drain and flushing pipe including flush tank all as specified and directed.

S&F in repairs vitreous china wash basin white, flat back,size 580X450 mm, including cutting for pinning in ends of brackets all as specified and directed.

S&F in repairs 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed.

S&F in repairs 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed.

S&F PVC connection 15mm size PTMT nuts of length 450 mm all as specified and directed.

S&F in repairs 15 mm bore fancy type bib taps long body (two in one) cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repairs brass chromium plated, fancy type, 15 mm bore sink cock (wall mounted) with 150mm long sweil spout, wall flange ad provisin of WP connection, cast copper alloy with fancy type chromium plated screwd down, screwed for iron pipe or for brass ferrule all as specified and directed. Make : CERA cat part No F 2003253 or Equivalent of Jaquar/Prayag/ Parko/ Prayag.

S&F in repairs 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule. Make:- ESS ESS CROMA Cat Part No C 202B or Equivalent of JAQUAR/PARKO/PRAYAG

S&F in repairs CP soap dish all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 414 or Equivalent of JAQUAR/PARKO/PRAYAG

S&F in repairs 15 mm bore piller taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts. Make:- ESS ESS CROMA Cat Part No C 201 or Equivalent of JAQUAR/PARKO/PRAYAG

S&F in repairs Kitchen sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm (or nearest size as per Cat Part specified). Make : Blue Star Model No SBSD-___ or equivelant of Nirali / Prayag

M&L 100 mm dia stainless steel cockroach floor trap with grating including jointing with solvent cement all as specified and directed.

S&F UPVC pipes out side dia 16 mm of pressure rating 10 Kgf/sqcm, spout pipe fixed in floors all as specified and directed

Taking down chowkhats and shutters of windows/ventilators with wire mesh / glass and MS grills of any size including all fittings and fixtures all as specified and directed.

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making, provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws complete as per architectural drawings and the directions of Engineer-in-Charge. Note : (i) Glass panes will be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading and glazing clips, hionges, handle. However it will not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.

S&F sheet glass, ordinary quality, 5.5 mm thick, plain or frosted on one side and glazed with oil putty or fixed with rubber beading in square exceeding 0.5 Sqm in each pane or as required all as specified and directed.

S&F aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm of approved design and fixed with aluminium windows all as specified and directed.

Taking down chowkhats or frames with shutters area exc 1.50 sqm but n exc 4.00 sqm each including iron mongery all as specified and directed..

Taking down chowkhats or frames with shutters area n exc 1.50 sqm each including iron mongery all as specified and directed..

Taking down shutters of any description area nexc. 1.00 sqm each all as specified and directed.

S&F in repairs solid PVC door frame plain/wood grain printed of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing all as specified and directed.

S&F factory made solid panel plain/wood grain printed PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width, stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as a gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the styles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing on the frame at site as per specification & drawing.

S&F 35 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, both faces is covered with decorative face Laminate both side with and including 5mm thick teakwood lipping all around/frame to match on both side with supply & fixing stainless steel 7.5 inch Mortice 7 lever door lock, double action with handle all as specified & directed.

S&F 100 mm butt hinges stainless steel all as specified & directed.

S&F aluminium anodised 200 mm barrel tower bolts of extruded section all as specified and directed.

S&F aluminium handle 150 mm cast type anodised all as specified & directed.

S&F aluminium alloy hasps and staples, type -1, safety type, size 115 mm, anodized finish not less than Grade AC 10 of IS 1868 : 1996 including fixing with screws all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.

Demolition and breaking of drain pipes 75 mm dia (salt glazed stone ware, AC, PVC or reinforced concrete) set in cement mortar all as specified and directed

Demolition and breaking of drain pipes 110 mm dia (salt glazed stone ware, AC, PVC or reinforced concrete) set in cement mortar all as specified and directed

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls including stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls including stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Supplied and fixing of framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, windows, balcony in ground floor, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to FE 290 Gde -E-165 all as specified and directed.

S&F in repairs pre-painted galvalume aluminium zinc coating GI based trapezoidal profile roofing sheets 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings/cladding having effective & overall width 1015 mm &1072 mm respectively, profile hieght 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scafoldings of any hieght all as specified and directed. Note : Rate should be inclusive of any overlapping. GI sheet should have a minimum over lapping of 10 cm while fixing in case of roof covering.

S&F in repairs joist, channel, angle, tee, sections & MS flats fixed independently, without connecting plate, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) for purlins fixed to wooden rafters and all other similar works conforming to Fe 410-W (Gde-E-250) quality-A all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of epoxy paint over two coats of epoxy primer all as specified and directed. Make : Asian paints PPG / Berger protective coating or equivalent

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm in widht or girth and applying one coat of synthetic enamel paint (upto any height) including scaffoldings where required for external painting all as specified.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 metre mean radius built in CM 1:6 all as specified & directed.

M&L brick work with fly ash modular building bricks having standard size built in CM 1:3 all as specified & directed.

M&L for preparing old painted wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified & directed..

M&L PCC 1:2:4 type B 2 as in hard standing 75mm thick (using 40mm graded aggregate) including necessary expansion joints and filling joints with bitumen all as specified and directions

M&L PCC 1:3:6 type C 2 as in, plinth protection 75mm thick (using 40mm graded aggregate) including necessary expansion joints and filling joints with bitumen all as specified and directions

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces all as specified and directed

Taking down carefully copper/aluminum submain wiring complete including all fixtures such as AC box's, switches, MCB's isolators, DB's, MCCB's, meter boxes etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces all as specified and directed

Material & Labour point wiring (Concealed type) with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI marked), 19/ 20 mm dia suitable size including cutting chases for conduits, sinking for concealed boxes and for concealed conduit wiring with all fittings and accessories including with and fix concealed 1.2 mm thick pressed steel sunken box and fix concealed 1.2 mm thick pressed steel sunken box and with including lamineted sheet cover for fixing switch socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match with the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I complete for one light point / Exhaust fan / wall fan controlled by one one way switch 5 amps

All as per serial no.84 here-in but for one ceiling fan by one switch & regulator

All as per serial no.84 here-in but for one 3 pin socket point 5 Amps on independent board

All as per serial no.84 here-in but for one 3 pin socket point 5 Amps on same board

S&F Switch piano, flush type single pole, one way 5 Amp all as specified and directed

S&F socket 2/3 pin 5 Amp all as specified and directed.

S&F stepped type electronic fan regulator 450 watt flush type on the existing phenolic laminated sheet all as specified and directed

Supply & Fix ceiling rose surface bakelite 65 x 50 mm two to three terminals all as specified and as directed.

Supply and Fix 20 watt LED in repair, 4 feet long, with extruded aluminium housing and robust construction LED lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack. fixed on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed. Make : Wipro, Model No Wipro Garnet 20W Aluminium LED batten light 6500K, D552065 / Havells, Model No Higher Wattage 22W LED 6500K / Philips, Model No BS150W LED 20S-6500 PSE OD GR / OSRAM.

Supply and fix surface mounted 9/10 watts LED tube light fitting in repair, 2 feet long light fitting with square batten LED lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack. fixed on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed. Make : Wipro, Model No Wipro Garnet 10W LED batten light 6500K, D571065 / Havells, Model No Higher Wattage 10W LED 6500K / Philips, Model No BS150W LED 10S-6500 PSE OD GR / OSRAM.

Supply and fix MCB SP, in repair, 240 volt, 5 to 32 Amps all as specified and directed.

Supply and fix MCB SPN, in repair, 240 volt, 40 Amps all as specified and directed.

Supply and laying sub main wiring (concealed type) in repair, for AC point/ DB to DB with two run of 4 sqmm stranded copper conductor wire (FRLSH) with one run of 4 sqmm stranded copper conductor as earth continuty conductor connected to common earth dolly including adequate size and including rigid non-metallic PVC heavy duty conduit (ISI marked), 19/ 20 mm dia suitable size including cutting chases for conduits all as specified.including taking out old U/s sub main wiring of any size Note: Mode of measurement shall be two runs of 4 sqmm cable and one run of 4 sqmm cable and one run of conduit shall be measured as one length.

Supply and fix sheet metal enclosures, double door, for DBs when MCBs to be used 240 volts 4 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection all as specified and directed.

GANGAJAL

Vandan Enterprises

M/S KISHAN CONSTRUCTION

Vipul Enterprises

Bidder Name

NATH CONSTRUCTION

Vandan Enterprises

Vipul Enterprises

GANGAJAL

M/S KISHAN CONSTRUCTION