PROVN OF INTERLOCKING TILES HARD STANDING VISITOR PARKING AND IRON COVER FOR DRAIN NEAR MAIN OFFICE AT WARDEC AND CERTAIN MINOR WORKS UNDER AGE B/R-I AND AGE E/M OF GE (SOUTH) DELHI CANTT-10

Amount

Surface exacavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all a specified and as directed.

Excavation in trenches in soft/loose soil, not exc 1.5m wide & n exc 1.5m in depth as in foundation, mainholes etc.n exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all a specified and as directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in surface channels & drain complete all a specified and as directed.

Returning, filling in including, spreading, levelling, watering and well ramming in layers n.exc 25cm thick, in soft/loose soil complete all a specified and as directed.

Removal of excavated surplus soil to a distance not exc 50 metre where directed by Engineer-in-Charge at a level not exc 1.5m above or below the starting point complete all a specified and as directed.

M&L for formwork to sides of concrete foundations,footings, base of column work complete all a specified and as directed.

M&L for formwork to sides of pillars, post, column work etc. complete all a specified and as directed.

M&L Reinforced Cement concrete (nominal mix) 1:1.5:3 type A-1 using 20 mm graded stone aggregate as in footing complete all a specified and as directed.

M&L Reinforced Cement concrete (nominal mix) 1:1.5:3 type A-1, using 20 mm graded stone aggregate as in column complete all a specified and as directed.

M&L MS TMT bars 10 mm and above, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement complete all a specified and as directed.

M&L Mild steel TMT bars 6mm to 8mm dia including spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all a specified and as directed.

M&L Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all a specified and as directed.

M&L for Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200 mm thick (horizontal or sloping) for flat and rough finished surfaces complete all a specified and as directed.

M&L for RCC 1:1.5:3 A1, using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns, in roofs and in shelves and the like complete all a specified and as directed.

M&L for Use and waste of formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves, including supports, overhangs etc also splays between floors and beams for flat and rough finished surfaces of concrete complete all a specified and as directed.

M&L for RCC 1:1.5:3 A1, using 20 mm graded stone aggregate as in beams, cantilevers, bressumers, lintels over 1.5 m span complete all a specified and as directed.

M&L for rendering 15mm thick plaster in CM 1:6 on fair faces of brick work or concrete surfaces of walls finished even & smooth with out using extra cement complete all a specified and as directed.

M&L for 10mm thick cement plaster in CM 1:3 as in ceiling finished even and smooth without using extra cement complete all a specified and as directed.

M&L for Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) with using water proofing compound finished even & fair without using extra cement work complete all a specified and as directed. Note: WPC shall be measured and paid saperately

Supply only Liquid water proofing compound.

M&L preparing new surface of wall and applying two coat of oil emulsion distemper over a coat of wall care putty complete all a specified and as directed.

M&L preparing new surface of ceiling and applying two coat of oil emulsion distemper over a coat of wall care putty complete all a specified and as directed.

M&L for preparing of new surfaces of wall and applying two coat of exterior emulsion paint over a primer coat complete all a specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D2- using 40mm graded stone aggregate as in sub base etc. complete all a specified and as directed.

M&L Hard core brocken stone or boulders of guage n.exc 63 mm deposited, spread and levelled in layers n.exc 15 cm thick, watered and rrammed to a true surface complete all a specified and as directed.

S&F powder coated aluminium frame for partitions,doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all a specified and as directed.

S&F aluminum powder coated door shutter, aluminium section weighing not less then 0.55 Kg/m incl necessary jointing cleats, glazing clips rubber neoprene packing including (a) 150mm handle - 02 Nos (b) Stainless steel hinges - 100mm - 03 Nos (c) Mortice lock in built 3 lever-01 Nos in each shutter, alum anodized snap beading screw etc complete all a specified and as directed. Note: Glass & particle board shall be paid measured and separately.(Note: the rate quoted by the tenderer are deemed to be included of all fittings)

S&F 4.8 mm thick tinted glass fixed to aluminum frame work with rubber beading gasket complete all a specified and as directed.

S&F 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed to aluminum framing complete all a specified and as directed.

M&L powder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section(two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all a specified and as directed. Note:- (a) Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. (b) Cost of glass, SS wire mesh and all fittings/ fixtures deemed to be incl in the above quoted rates and no extra shall be paid.

S&F steel work in tubular truss including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 of grade St-240 complete all a specified and as directed.

S&F bands, straps, supports or stays for rainwater, plain angle cleat for securing purlin, knee piece inserts, two way and three way straps, plate washer and similar small articles, confirming to Fe-290 Gde E-165 complete all a specified and as directed.

S&F plates (plain or chequered) Channels, square, cut or notched (ordinary and counter sunk) forming holes without any attachment of Fe-410-W (Grade E-250) quality B complete all a specified and as directed.

S&F mild steel works such as wind ties for roof including securing with bolts etc and similar work using rolled section confirming to Fe-290 Gde E-165 complete all a specified and as directed.

S&F pre-colour coated high tensile strength galvalume sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through specialist agency and as per profile and shade as approved by GE and complete all a specified and as directed.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all a specified and as directed.

S&F Mild steel screw bolts(machine made)11 to 15mm dia of shank with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or squarae nut, exc 5cm but n.exc 10 long complete all a specified and as directed.

M&L for sand filling under floors or in foundation including watering and consolidation complete all a specified and as directed.

M&L for machine pressed precast concrete interlocking paver block (PU molded ) of 60 mm thickness any shape and size and color, M-35 Grade with grey cement and pigments including glossy cotting ultra finish complete all a specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, bed blocks, bands and similar work including weathering rounded or chamferred angles and throating including necessary form work required complete all a specified and as directed.

M&L Roughning sufaces of old concrete floor by packing, sweeping cleaning and washing down with water to remove dust etc and brushing neat cement slury @ 3Kg of cement per Sqm complete all a specified and as directed.

Dismantling floor or hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the presmises complete all a specified and as directed.

M&L vitrified Ceramic tiles 10 mm thick (square/ rectagular) polished, area of each tiles not exceeding 0.38sqm in floors/ wall etc, laid over and including 15 mm thick screed bed in CM1:6 ,set and joint in neat cement slurry and pointed in white or coloured cement to match etc complete all a specified and as directed.

M&L vitrified Ceramic tiles 10 mm thick on vertical surfaces as in skirting/dado,laid over and including 10 mm thick cement plaster in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match etc etc complete all a specified and as directed.

Taking down of shutter any description exc 1 Sqm and n. exc 2 Sqm (refixing in same opening ) after cutting the bottom rail at requiared size complete all a specified and as directed.

Excavating in post holes (or similar holes) each not exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface, work in soft/loose soil complete all a specified and as directed.

M&L for PCC 1:2:4 Type B2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all a specified and as directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C2 (using 40 mm graded stone aggt) as in sub base of floor / plinth protection etc finished surface fair & even complete all a specified and as directed.

S&F rolled mild steel work as in post and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire etc, flat iron fillets( for escuring wire mesh etc.) including all necessary drilling, bolting or riveting etc and similar work conforming to GDE Fe 410-0 or Fe 310-0 complete all a specified and as directed.

S&F rolled mild steel work as in framed barred iron gates including all necessary drilling, bolting or riveting etc and similar work conforming to GDE Fe 410-0 or Fe 310-0 complete all a specified and as directed.

S&F cast iron work grade FG 150, for spikes & arrows as per approved shape and design for fixing by welding on gates complete all a specified and as directed.

S&F 5-10mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all a specified and as directed.

Supply only chain link MS galvanised fencing, any size or type complete all a specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, strainig bolts, etc. including provision of binding wire complete all a specified and as directed.

S&F mild steel framed work using angle iron ,flat iron fillet etc including necessary cutting,drilling,welding as required complete all a specified and as directed.

M&L for 6mm dia powder coated aluminium decco grill, (minimum thickness of powder coating 50 micron), section No-104, 100mm aperture of hexagonal design and pattern as approved complete all a specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B-1 using 20mm graded aggregate as in flooring, finished rough and even complete all a specified and as directed.

Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each removing from store complete all a specified and as directed.

Taking down chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames)removing from store complete all a specified and as directed.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., supplied and fixed - Size of frame - 125 x 60mm complete all a specified and as directed.

M&L for Cement concrete in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) TypeC-0, 1:3:6 using 12.50 mm graded agregate complete all a specified and as directed.

S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all a specified and as directed.

S&F 35mm thick flush shutter solid core constr with block board veneered ply wood face pannals commercial type on both faces as in cupboard complete all a specified and as directed.

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all a specified and as directed.

S&F mild steel, 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all a specified and as directed.

S&F 100mm size butt hinges stainless steel of AISI 304 complete all a specified and as directed.

S&F 300 mm long, stainless steel of AISI 304 grade, sliding door bolt with hasp, staple (bolt type) and fixing clipss of sheet, cast or extruded sections and fixing bolts and fixed etc complete all a specified and as directed.

S&F stainless steel of AISI 304 grade barrel tower bolt 200 mm long, extruded section, etc complete all a specified and as directed.

S&F stainless steel of AISI 304 grade handle of size 200mm size long etc. complete all a specified and as directed.

S&F brass magic eye for panelled/flush shutter 35mm thick complete all a specified and as directed.

Demolition of cement concrete in ground floors and pavings n'exc 15 cm thick below or above ground level (unreinforced) complete all a specified and as directed.

S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc Fe- 290 -W (Gde E- 165) quality- B complete all a specified and as directed.

Taking down carefully the old U/S Aluminium / Copper point wiring (light, fan, socket or power) complete fitting such as switches, ceiling roses, pendants, sockets, regulators, etc and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area ie with OBD/colour wash/white wash as the existing finish complete all as specified and as directed.

M&L for point wiring complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in but with through existing concealed PVC conduit and including replacement of unserviceable pressed steel terminal boxes of required size with top cover 3 mm thick plastic/laminated sheet of required color with screwed and cup washer with all accessories including 1.5 sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified for One light/Fan/bell point controlled by one switch 5 Amps one way using cable (1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing) and making good to disturbed surface of walls including necessary touch up with through adjoining surface of disturbed area i.e with OBD/colour work/white wash as existing finishes complete all as specified and as directed. Note :- The rate quoted by the tenderer are deemed to be included for porvision of new conduit where there is a burnt/blokage/damage to the existing conduit including bends/elbows/tees/Junction boxes.

All as per item No. 74 above but One 3 pin socket outlet, 5/6 Amps, independent complete all as specified and as directed.

All as per item No.74 above but 5 Amp socket outlet on same board complete all as specified and as directed.

All as Item No 74 above but for one socket outlet 5/15 Amps on Independent board with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing complete all as specified and as directed.

S&F switch piano flush type 5/6 Amps SP one way complete all as specified and as directed.

S&F socket outlet 2-in-1, 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and as directed.

S&F switch piano type 15/16 Amps SP one way complete all as specified and as directed.

S&F universal socket outlet 2-in-1 (multipurpose) 5pin 6/16 Amps flush mounted type complete all as specified and as directed.

S&F bell push, flush type 5/6 Amps complete all as specified and as directed.

S&F ceiling rose surface Bakelite 65x25 mm two to three terminals complete all as specified and as directed.

S&F in replacement, Decorative wall light mounting suitable for LED Lamp including 12 Watt LED Lamp complete with all connections complete all as specified and as directed. .

S&F in replacement Surface mounting round shaped LED downlighter with durable housing with Al heat shrink with diffuser to give glare free light 6 Watt LED 6000K/6500K lamp type from ceiling of stairs/common areas, complete all as specified and as directed.

S&F in replacement Wall mounted LED Integrated Batten 20 Watt - 4Ft White, indoor decorative PVC extruded LED battern complete all as specified and as directed.

S&F in replacement Wall mounted LED Integrated Batten 10 Watt-2 Ft White, indoor decorative PVC extruded LED batten complete all as specified and as directed.

S&F in replacement LED bulk head in engineering plastic housing with clear prismatic diffuser, 10W WHITE in replacement of old unsv bulk head fitting including all accessories connecting up twin core flexible copper conductor cable complete all as specified and as directed.

S&F of electric bell Ding Dong type AC, 230 volts single phase complete all as specified and as directed.

S&F 0-4 step type electronic regulators for ceiling fan 1200mm sweep, 240V complete all as specified and as directed.

S&F BLDC (Brushless Direct Current) Ceiling Fan 1200 mm Sweep operated through regulator, not less than 350 RPM having air delivery 215Cum, high air flow with silence operation , with fully copper winded motor & ribbed 3 Nos A/M blades. The BLDC motor fan shall have 100% rust free blades. The fan shall be BEE 5 Star rating and compliant with IS 374 and making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan including taking down old ceiling fan and depositing to MES store yard and complete all as specified and as directed.

S&F in replacement of VTPN DB 6 way double door, vertical type for fixing MCCB up to 200 Amps as incommer and MCBs as out goings with metel door and IP 43 Protections and connecting complete all as of approved make by the GE and complete all as specified and as directed.

S&F in replacement of sheet metal enclosures double door for DBs when MCBs to be used SPN-4 Way, 240V with 200 Amp rated busbar complete as per site requirement and complete all as specified and as directed.

S&F in replacement of MCCB 3 Pole .415 V. fixed type, 160 Amps with breaking capacity 36kA complete all as specified and as directed.

S&F in replacement MCB SPN 32 Amps 'C' series, breaking capacity 10 Ka, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc. complete all as specified and as directed.

S&F for MCB SP 6 to 32 Amps 240 Volts, 10kA, `C' complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to GI wire 4 mm as earthing lead by means of nut, bolts and check nuts and washers, GI light grade protection pipe 15 mm dia upto 7.5 M, GI watering pipe 20 mm dia medium grade, RCC cover with funnel, excavation in any type of soil, PCC pit charcoal, salt all as shown in electrical plate No 5 of SSR Part I, including earth test point upto panel board, complete all as specified and as directed or indicated including testing on completion

Taking down and refixing Hot water geyser incluiding replacement of hot &cold water pipe, fastner etc complete and making good disturbed surface area with same surface finish complete all as specified and as directed.

Taking down unserviceable Submain wiring twin core of any size complete and making good disturbed surface complete all as specified and as directed.

M&L for Sub Main wiring using single run PVC FRLS grade Insulated unsheathed, multistrand copper conductor cable 2 runs of 4 Sqmm for phase and neutral and 1 run of 4 Sqmm for earth wire drawn through concealed PVC conduit wiring in wall not less than 25mm dia with all fittings like tees, bends, junction/ terminal boxes etc as per site requirement and complete all as specified and as directed. Note:- (i) 2 runs of cable for phase/ neutral and 1 run for earth will be measured and paid as one unit length (ii) The rate quoted by the tenderer are deemed to be included for porvision of new conduit where there is a burnt/blokage/damage to the existing conduit including bends/elbows/tees/Junction boxes.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, including fabrication of GI bracket 25/40mm dia suitable for fixing of Led light fitting duly fixed with clamps, nut, bolts, & washers etc complete all as specified and as directed.

Supply and fixing lamp holder bakelite insulated body with back plate suitable for batten fitting complete all as specified and as directed.

Supply and fixing LED Bulb 12 Watt B-22 Cap, AC 230V, 50 Hz, suitable for Batten Holder complete all as specified and as directed.

Supply and fix MCB DB SPN 4 Way with metal double door, (IP43 Protection) flush mounting epoxy powder control having 100 Amps rated bus bar including blank plate for MCB complete all as specified and as directed.

Supply, laying and testing cable XLPE insulated screened PVC bedded, galvanised steel strip armoured, electric power cable (heavy duty) 1100 volt grade with stranded aluminium conductor of size 10 Sqmm 2 core complete all as specified and as directed.

Supply and laying old size brick coveringcommon burnt clay building bricks sub class 'B' designation 75 of size 230x115x75mm complete all as specified and as directed.

Supplying and laying including taking out G.I. tubing light grade for encasing LT cables for mechanical protection, laid under plinth/ floors/ roads/ paths/ culverts or fixed on walls or concealed in walls or along the steel poles incl bends/clamps and all accessories size of 40 mm bore complete all as specified and as directed.

S&F MCB DB SPN 8 Way with metal double door, (IP 43 Protection) flush mounting epoxy powder control having 100 Amps rated bus bar including blank plate for MCB completed all as specified and as directed.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

Chaudhary Constructions

M/S.M.S.Devi.Const.Co

P R Constructions

M/S MANISH KUAMR SINGH

VED PRAKASH ARORA