REPAIR TO HOT AND COOLING APPLIENCES AND SECURITY LIGHTS CEILING FANS DESERT COOLERS EXHAUST FANS GEYSERS WATER COOLERS AND AIR CONDITIONERS IN SILS GARRISON

Amount

M&L for Servicing of ceiling fans of sweep 1200/1400mm including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws and refixing to the existing site after servicing complete all as directed. (Unserviceable parts other than specified in this item if any will be measured seperately).

M&L for Servicing of Exhaust fans of sweep 300mm to 450mm including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws and refixing to the existing site after servicing complete all as directed . (Unserviceable parts other than specified in this item if any will be measured seperately).

Rewinding of ceiling fan motor of size 1200mm/1400mm with super enamelled copper winding wire of existing gauge affter cutting and removing the burnt existing winding including varnishing heating by providing fresh insulating materials complete.

Rewinding of exhaust fan/wall monting fan motor of size 300mm with super enamelled copper winding wire of existing gauge affter cutting and removing the burnt existing winding including varnishing heating by providing fresh insulating materials complete.

All as per Srl Item No-4 here-in-above but for exhaust fan of size 400/450 mm of any make complete all as specified.

S&f in replacement ball bearing of ceiling / exhaust fan of any size and make as required with alignment of shaft and testing complete. Make - SKF (6201 to 6203) or equivalent in TATA as approved.

S& F in replacement of AC film capacitor 4.0 mfd, 440 volts suitable for any type ceiling fan/exhaust fan in FR plastic casing including connection complete. Make - Havells cat ref no. 4.0 mfd / 440V / PLWW / 28x52 or equivalent in Epcos / Usha as approved.

S& F in replacement of AC film capacitor 2.5 mfd, 440 volts suitable for any type ceiling fan in FR plastic casing including connection complete. Make - Havells cat ref no. 2.5 mfd / 440V / PLWW / 25x45 or equivalent in Epcos / Usha as approved.

Replacement of old unserviceable fan blades made of MS sheet duly powder coated ,of type make and colour as of ceiling fan suitable for 1200mm sweep ceiling fan of any make incl all accessories complete all as specified.

Replacement of Blade assembly of Exhaust fan with fixing hexagonal nut of size 300 to 450mm of any make.

Replacement of iron Frame of exhaust fan 4 way with welded and painted as directed .

M/L Gun metal bush of exhaust fan

S&f in replacement of rubber reel with a pair of clamp, nuts, bolts, split pins etc suitable for ceiling fan down rods of any size and make as required.

S&F in replacement of PVC canopy suitable for ceiling fan of any size and make as required.

S&F in replacement of PVC insulated and sheathed flexible 3 core cable with copper conductor of size 0.5 sqmm complete.

S&F in replacement of down rod of ceiling fan made of GI pipe medium grade 15 mm bore of length upto 600 mm including cutting, threading, painting etc as required.

Taking down of desert cooler fixed at any position, cleaning internally and externally by scraping all scales dirt etc and repairs to desert cooler to check leakage, tightening ( By replacing screws, nuts and bolts etc ) including painting of desert cooler with spray machine with two coats of synthetic enamel hammer tone paint over one coat of red oxide primer, letters, Refixing of the desert cooler after necessary oilling and greasing of fan and water lifting pump complete all as specified and directed

Supplying in replacement Fan motor 1/6 HP, 230 volt, single phase for the existing desert cooler complete all specified and directed( Make GEC/ Cool Home/Bajaj/Polar/Khaitan )

Supplying in replacement Water lifting pump, Vertical type,18 watts, 230 volt, 50 C/S, single phase suitable for desert coolers complete all specified and directed ( Make : GEC/ COOL HOME/Bajaj/Polar/Khaitan )

Supplying in replacement Side panel made out of 1.0 mm thick GI sheet, fixed with iron handle suitable for desert coolers of capacity 3000 cfm including two coats of synthetic enamel hammer tone paint over a one coat of red oxide primer on both side of panel complete all specified and directed

Supplying in replacement High density polythene pipe 15 mm dia complete all specified and directed

Supplying in replacement Complete steel body of desert cooler of capacity 3000 cfm duly painted with two coats of synthetic enamel hammer tone paint over one coat of red oxide primer . The body of desert cooler shall be fabricated as under :- ( a ) The top and bottom made out of 1.25 mm thick GI sheet. ( b ) side panels (set of three) made out 1.00 mm thick GI sheet. ( c ) Front grill of suitable size and of approved quality.

Supplying and Replacement Three way water distributor, heavy duty, PVC, including necessary nuts and bolts complete and taking out old distributor complete all specified and directed

Supplying in replacement of capacitor 4 mfd suitable for Desert cooler complete all as specified and directed.

Re-wiring of desert cooler with suitable size of copper conductor PVC insulated cable and providing main lead three metre long of 3 core PVC insulated copper conductor of size 23/ .0076 complete all specified and directed.

Dismanting and taking out Old, Unservicable fan motor from the desert cooler and Rewinding with supper enamel copper winding wire of suitable size, varnishing etc including replacement of bushes, assembling testing and refixing at the existing site complete all as specified and directed

M& L for fabrication of desert cooler stand made out of MS angle iron 40x40x6mm thick all as per existing size suitable at site incl painting ith two coats of synthetic enameld paint over a coat of red oxide primer coat .

Repairs to voltage stabilizer of any make, single phase with input voltage 135 - 190 V and out put voltage 200-240 volt, capacity 5 KVA by dismantling and taking out burnt main transformer and rewinding with super enamelled copper wire of suitable size including varnishing and insulation material etc.complete all as specified and directed

All as per item No- 29 here in before but for capacity 03 KVA

All as per item No- 29 here in before but for capacity 01 to 02 KVA

Dismantling and servicing of cooling appliances including cleaning, painting, necessary test of leakage by nitrogen gas, brazing, compressed air wash and make the system functional complete all as specified for Acs window/ Split type of any capacity.

All as per item No 32 here in before but for Water Cooler of any capacity

All as per item No 32 here in before but for Refrigerator of any capacity

Remove the unserviceable fan motor from window/Split AC any capacity removing the burnt out winding wire from slots, clean slots with emery paper and rewind the same with superior quality copper wire insulate properly and bringing back and fixing in position and testing and commissioning:-

All as per item No 35 here in before but for Water Cooler upto 150 Ltrs capacity

Replacement of unserviceable air filter for Split AC.

S&F relay of Refrigerator of the same make and type.

Disconnect the suction and discharge line to the unserviceable compressor, replace with the new compressor brought from the factory of the same make connect the refregerent lines systems flushing vacuumising of the entire system arrest all leakages including testing and commissioning for Split AC 1.5 ton capacity

All as per item No-39 here in before but for Water Cooler above 80 LTR upto 150 Ltrs capacity

All as per item No-39 here in before but for Water Cooler 40 to 80 Ltrs capacity

All as per item No-39 here in before but for Refrigerator 165 to 185 Ltrs capacity

Replacement of unserviceable thermostat of AC up to 1.5 Ton

All as per item No 39 here in before but for Water Cooler upto 150 Ltrs capacity

All as per item No 39 here in before but for Refrigerator up to 310 Ltrs capacity

Remove the unserviceable fan blade from the condenser cooling motor and replace with new fan blade of same size and type for Water Cooler any capacity

All as per item No 46 here in before but for Air conditioners up to 1.5 Ton.

S&F Blower assembly of suitable type for Air conditioners up to 1.5 Ton.

Replacement of unserviceable float valve with new brass Float valve of water cooliers/ desert coolers complete 15 mm dia

Flushing & vacuumising the system and charging of necessary refrigerent at required quantity for Window AC/Split AC Up to 1.5 Ton

All as per item No-50 here in before but for Refrigerators of any capacity.

All as per item No-50 here in before but for Water coolers of any capacity.

Disconnecting the inlet and outlet connections of the existing Geyser 25/50 Ltr, taking down carefully, cleaning/descaling the blocks both in GI pipes and water heater refixing the bolts by proper grouting in the wall and refixing the water heater in the same or in other places as directed.

Replacement of unserviceable heating element of geyser 2KW/1.5 KW of any pattern all as specified. Make: Dasspass/Recold/Bajaj.

Replacement of unserviceable thermostat of geyser 2KW/1.5 KW of any pattern all as specified. Make: Dasspass/Recold/Bajaj

Supply and fix geyser apparatus plate (any make, any type) copper alloy chromium plated suitable for geysers 25/50 litre capacity including rubber gasket, nuts / bolts etc complete.

Replacement of unserviceable PVC flexible pipe inlet 16mm outer dia and 450 mm long for hot/cold water heavy duty with brass nuts & bolts.

DEV RAJ MAGOTRA