Loading
Loading…
Loading…
Tender ID
Tender Value
₹42.4 L
EMD Value
₹42,355
Closing Date
9 Mar 2026, 5:30 pmClosed
Karnataka Power Transmission Corporation Limited
Shruthi R
Tender for Design, Manufacture, Testing and Supply of Various C- Type Wedge Connectors of various sizes for replacing weak terminal and clamp at various 220/66/11 and 66/11kV sub-stations coming under the Operation Division Kolar, Transmission Operation Zone, Bengaluru conforming to KPTCL technical specifications F.O.R.D. at stores/ site basis, including insurance, transportation and unloading.
KPTCL/2025-26/IND0256/CALL-2
KPTCL/2025-26/IND0256/CALL-2
Open
Two Tender Document System(Two Cover)
KPTCL CEE Transmission Zone Office Bengaluru
9 documents required · 9 mandatory
The Bidder shall be a manufacturer or supplier and should have a minimum experience of 5 years in designing, manufacturing, testing of equipments/materials of similar rating capacity to the ones specified and being offered.
The bidder should have supplied at least 50% of quantity of material/equipment specified in the present enquiry or higher ratings to State/Central owned Transmission Utilities/Generation Utilities/ PSUs -Bidders shall have to upload the supporting documents such as Purchase order copies/order completion certificates/ performance certificates
The Bidder shall furnish the performance certificates for at least 50% of quantity of material/equipment specified in the present enquiry or higher ratings, issued by State /Central owned Transmission Utilities/Generation Utilities/PSUs. The issuing officer of performance certificates shall not be below the rank of Executive Engineer or equivalent division head. The performance certificate shall indicate the rating of Tendered material/equipment, make, name of the PSUs/sub-station/Generating Station where it is installed, date of commissioning etc., in order to show that the Tendered material/equipment specified in the present enquiry were in successful operation for at least a minimum period of Two years as on the date of bid opening. Bidders shall have to upload the performance certificates.
The Bidder shall furnish Type test Certificate not older than Seven years as on the date of bid opening for having conducted successful type test at a NABL accredited test house on the capacity & voltage specified in the bid. If valid type test reports are not available for the specified in the present enquiry, the bidder shall give an undertaking agreeing to conduct all type tests in a NABL Accredited Laboratory if order is placed on the firm without affecting the Delivery Schedule and at no extra cost to KPTCL.
Financial Capability corresponding to bidders Annual Turnover for best of three years of preceding five years (2020-21, 2021-22, 2022-23, 2023-24, 2024-25) shall not be less than 63.53.00 Lakhs. The bidder shall upload audited annual financial statements such as Profit & Loss statement, Balance sheet for preceding 5 years duly certified by a Chartered Accountant.
The Liquid Assets as on last date of previous month of tender inviting date or at a later date before submission of the bid consisting of cash at Bank,Term deposit and availability of fund-based credit facilities in any nationalized/scheduled bank shall not be less than 25% of the amount put to tender i.e., 10.59Lakhs. However, it shall be Rs.5.29Lakhs in respect of Micro & small Enterprises. The cash at Bank, term deposit and availability of fund-based credit facilities shall be supported by a certificate issued by Nationalized/scheduled bank shall be uploaded.
The bidder should have Goods and Service Tax (GST) registration and shall upload the necessary supporting document to establish compliance for having GST registration. Following document shall be submitted by the bidder.Copy of PAN Card.Copy of Partnership Deed/ GST registration certificate for Proprietorship/ Company MoA & AoA or Certificate of Incorporation, as applicable.
The Bidder shall upload the power of attorney in the prescribed format on Rs.500/- Bond paper, along with DD & BG (if any) towards EMD. Further DD or Bank Guarantee towards EMD over and above Rs. 10.00 Lakhs shall be sent in original to Chief Engineer Ele., Transmission(Operation)Zone, KPTCL, Bangalore so as to reach after the last submission date & on or before the date & time of opening Techno commercial Bids.
The bidder should not have been blacklisted by any State/Central Generating/ Transmission Utility/ PSUs as on the date of bid submission. The bidder shall upload a declaration in this regard and non-furnishing of the declaration will result in rejection of the Bid.
The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years with KPTCL. A history of awards involving litigations against the bidder or any part or JV may result in rejection of bid.
Bidders should furnish the self declaration stating the above and upload the same along with the other documents in the relevant field in the e-procurement portal, failing which the offer is liable to be rejected
₹500
₹42,355
21 Feb 2026
21 Feb 2026
10 Mar 2026
2 Mar 2026
Place
Designation
Name of the Company
Contact No.
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- II TECHNICAL DEVIATION
Enquiry No.: KPTCL/CEE/T(O)Z/BZ/2025-26/03/C-Type Wedge Connectors(call-2)
Design, Manufacture, Testing and Supply of Various C- Type Wedge Connectors of various sizes for replacing weak terminal and clamp at various 220/66/11 and 66/11kV sub-stations coming under the (Operation) Division Kolar, Transmission(Operation)Zone,Bengaluru conforming to KPTCL technical specifications F.O.R.D. at stores/ site basis, including insurance, transportation and unloading.
Please key in the SlNo., Volume , Section , Clause , Desc as given in Booklet and finally your Statement of Deviation/Variations.
This Sheet would be opened at the Techno-Commercial Opening.
For any further assistance for submitting your bids please call up KPTCL office. Please fill only in the blue coloured cells.
Please don’t insert your Bid values here or else your bid will not be considered for evaluation.
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.
Dear Sir,
The following are the Technical Deviations and Variations from and exceptions to the Specifications and documents, For Tender for Design, Manufacture, Testing and Supply of C- Type Wedge Connectors for Various sizes required for replacement of age old bolted type connectors in TL&SS Divisions of Hassan Transmission Zone. These deviations and variations are exhaustive.Except these deiviations and variations, the material shall be supplied as per specification and documents.
Note : Deviations specified elsewhere in the specification will not be considered.
Place
Name of the Company
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- III COMMERCIAL DEVIATION
Enquiry No.: KPTCL/CEE/T(O)Z/BZ/2025-26/03/C-Type Wedge Connectors(call-2)
Design, Manufacture, Testing and Supply of Various C- Type Wedge Connectors of various sizes for replacing weak terminal and clamp at various 220/66/11 and 66/11kV sub-stations coming under the (Operation) Division Kolar, Transmission(Operation)Zone,Bengaluru conforming to KPTCL technical specifications F.O.R.D. at stores/ site basis, including insurance, transportation and unloading.
Please fill Only in the Light Blue Couloured Box
Please key in the SlNo., Volume , Section , Clause , Desc as given in Booklet and finally your Statement of Deviation/Variations.
This Sheet would be opened at the Techno-Commercial Opening.
For any further assistance for submitting your bids please call up KPTCL Office.
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.
TO, THE CHIEF ENGINEER (ELE.), TRANSMISSION (OPERATION) ZONE, KPTCL, BANGALORE
Dear Sir,
I have read each of the Clauses mentioned in INVITATION FOR BIDS , INSTRUCTION TO BIDDERS , GENERAL CONDITIONS OF CONTRACT, SPECIAL CONDITIONS OF CONTRACT and COMMERCIAL TERMS AND CONDITIONS.
The following are the commercial Deviations and Variations from and exceptions to the Specifications and documents Tender for Design, Manufacture, Testing and Supply of C- Type Wedge Connectors for Various sizes required for replacement of age old bolted type connectors in TL&SS Divisions of Hassan Transmission Zone. These deviations and variations the matrix shall be suppliedas per your specifications and documents.
Note : Deviations specified elsewhere in the specification will not be considered.
Place
Name of the Company
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- IV QUALIFYING REQUIREMENT DATA
Enquiry No.: KPTCL/CEE/T(O)Z/BZ/2025-26/03/C-Type Wedge Connectors(call-2)
Design, Manufacture, Testing and Supply of Various C- Type Wedge Connectors of various sizes for replacing weak terminal and clamp at various 220/66/11 and 66/11kV sub-stations coming under the (Operation) Division Kolar, Transmission(Operation)Zone,Bengaluru conforming to KPTCL technical specifications F.O.R.D. at stores/ site basis, including insurance, transportation and unloading.
SHEET FOR TECHNO-COMMERCIAL OPENING
Please don’t insert your Bid values here or else your bid will not be considered for evaluation.Please fill only in blue coloured cells.
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
Bid Reference
Bidders Name and address :
Following (mentioned below) is the list of earlier order for
which are being furnished by us in the support of qualifying requirements for Tender for Design, Manufacture, Testing and Supply of C- Type Wedge Connectors for Various sizes required for replacement of age old bolted type connectors in TL&SS Divisions of Hassan Transmission Zone.
Turnover of the company for the past 5 years.
Capacity as in qualifying requirements.
Supplies done over the past 5 years.
Place
Name of the Company
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE V Bid Form
Enquiry No.: KPTCL/CEE/T(O)Z/BZ/2025-26/03/C-Type Wedge Connectors(call-2)
Design, Manufacture, Testing and Supply of Various C- Type Wedge Connectors of various sizes for replacing weak terminal and clamp at various 220/66/11 and 66/11kV sub-stations coming under the (Operation) Division Kolar, Transmission(Operation)Zone,Bengaluru conforming to KPTCL technical specifications F.O.R.D. at stores/ site basis, including insurance, transportation and unloading.
TO, THE CHIEF ENGINEER (ELE.), TRANSMISSION (OPERATION) ZONE, KPTCL, BANGALORE
Having examined the Bidding documents including Addenda Nos.
(Insert Number of sheets), the receipt of which is hereby duly acknowledged, we, the
undersigned, offer to supply and delivery
(description of goods and services in conformity with the said bidding documents and as
per the price schedules furnished in a separate sealed price bid.
We undertake if our bid is accepted, to commence delivery within
(number) days and to complete delivery of all the items specified in the contract within
(numbers)days calculated from the date of receipt of your notification of Award
we agree to abide by this bid for a period of 180 days from the date fixed for bid opening under
clauses 16 of the instructions to bidders and it shall remain binding upon us and may be
accepted at any time before the expiration of that period.
until a formal contract is prepared and executed, this bid together with your written
acceptance thereof and your notification of award shall constitute a binding contract .
between us
Place
Name of the Company
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE VI -ASSESSEMENT OF FINANCIAL CAPABILITY OF NEW FIRMS (who have not supplied to KPTCL earlier)
Enquiry No.: KPTCL/CEE/T(O)Z/BZ/2025-26/03/C-Type Wedge Connectors(call-2)
Design, Manufacture, Testing and Supply of Various C- Type Wedge Connectors of various sizes for replacing weak terminal and clamp at various 220/66/11 and 66/11kV sub-stations coming under the (Operation) Division Kolar, Transmission(Operation)Zone,Bengaluru conforming to KPTCL technical specifications F.O.R.D. at stores/ site basis, including insurance, transportation and unloading.
TO, THE CHIEF ENGINEER (ELE.), TRANSMISSION (OPERATION) ZONE, KPTCL, BANGALORE
Place
Name of the Company
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE - VII Commercial Terms and Conditions
Enquiry No.: KPTCL/CEE/T(O)Z/BZ/2025-26/03/C-Type Wedge Connectors(call-2)
Design, Manufacture, Testing and Supply of Various C- Type Wedge Connectors of various sizes for replacing weak terminal and clamp at various 220/66/11 and 66/11kV sub-stations coming under the (Operation) Division Kolar, Transmission(Operation)Zone,Bengaluru conforming to KPTCL technical specifications F.O.R.D. at stores/ site basis, including insurance, transportation and unloading.
TO, THE CHIEF ENGINEER (ELE.), TRANSMISSION (OPERATION) ZONE, KPTCL, BANGALORE
Place
Name of the Company
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT_wedge clamps Kolar-call 2.pdf
Tender Document • 0.37 MB
itb wedge clamps.doc
Tender Document • 0.13 MB
specifications.pdf
Tender Document • 0.87 MB
ifb wedge clamps.docx
Tender Document • 0.04 MB
techno commercial wedge clamps.xlsx
Tender Document • 0.03 MB
annexures.doc
Tender Document • 0.02 MB
Advisory note to bidders.docx
Tender Document • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .