Repair/Replacement of certain B/R and E/M works in various Bldgs South Camp and West Camp AT AGE MFFR under GE (N) Bikaner

Amount

Demolition of brick work built in cement mortar including all quoins, arches pillars etc all as specified.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified.

Taking down cement plaster of any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L Brickwork with sub class'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified.

Dismantling floor, heath or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for coloured non-skid tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all specified.

M&L for coloured glazed ceramic tiles of size 300x200 x7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles etc complete all as specified.

M&L 15mm thick screed bed or bedding layer for floor finishes in CM 1:6 all as specified.

M&L for 10mm thick screed bed or bedding layers for laying of vertical surface of wall in cement mortar 1:4 as on dados skirting and vertical surface complete all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S & Fixed in repair Gypsum board of any size for ceiling/walling including all necessary fittings complete all as specified.

Rendering 15mm thick in cement mortar 1: 4 on fair faces of brick work or concrete surfaces including finished fair and even surfaces complete all as specified.

Supply and fixing( factory Made ) 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (Without sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified.

S&F butt hinges, medium weight, cold rolled mild steel,100mm size all as specified

M&L 125mm size aluminium handles, cast type, anodised all as specified

S&F 200mm size aluminium anodised, barrel tower bolts of extruded section and fixed all as specified

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

S&F GI steel wire cloth,0.40mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanisied wire staples fixed all as specified

S&F 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc. 0.5 sqm in each pane all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from from old wooden or metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified.

Bib taps cast copper alloy with capstonhead handle, fancy type, CP screwed down, screwed for iron pipe or for brass ferrule 15mm bore, fixed in repairs complete.

4mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc. 0.5 sqm in each pane all as specified.

Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions 15mm bore, fixed in repairs complete.

Supply and Fixed in repairs fancy type chromium plated stop valves cast copper alloy screwed down high pressure fixed to pipe of 15mm bore all as specified.

Taking up or down GI steel water tubing and connection including cleaning for refixing of 15mm bore all as specified.

Taking up or down GI steel water tubing and connection including cleaning for refixing of 20mm bore all as specified.

Taking up or down GI steel water tubing and connection including cleaning for refixing of 25mm bore all as specified.

Dismantling water tanks exceeding 250 and not exceeding 500 litres capacity and removing to store complete.

Dismantling water tanks exceeding 500 and not exceeding 1000 litres capacity and removing to store complete.

M&L for GI tubing 15mm bore with all fittings fixed to walls, ceilings or laid in floors medium grade all as specified

M&L for GI tubing 20mm bore with all fittings and fixed complete to walls, ceilings or laid in floors medium grade all as specified

M&L for GI tubing 25mm bore with all fittings and fixed complete to walls, ceilings or laid in floors medium grade all as specified

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, hoisted and fixed in position including connecting up pipes, fixed in repairs complete.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, hoisted and fixed in position including connecting up pipes, fixed in repairs complete.

Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball , screwed for iron pipe or brass ferrule 20mm bore fixed in repairs complete.

S&F brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union in repair

Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore fixed in repairs complete.

Vitreous china wash basin, white, flat back, size 550 x 400mm, including brackets and cutting for and pinning in ends of brackets, fixed in repairs including 32mm bore brass chromium plated waste fitting and 32mm bore PVC waste pipe of sufficient length complete.

S & F syphonic action PVC low level flushing cistern of 10 ltr capacity including internal fittings, brackets,32mm flush pipe for EWC etc as required on site fixed in repairs complete.

Vitreous China wash down water closet pan, pedestal pattern, coloured, fixed in repairs including PVC seat cover black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fixing bolts and making connections to flushing cistern complete

Vitreous China WC seat Orrisa pattern size 580 x 440mm, white with integral foot rests fixed in repairs including cast iron ‘P’ or ‘S’ trap, lime concrete in sunken floor making connection with flush pipe using new GI flush bend (Floor portion) and making good to floors, matching to existing surfaces complete.

PVC connection 450 mm long for 15mm dia pipe having CP brass nuts with washers on both ends, fixed in repairs complete.

S&F in repaire Plastic water closet seat cover, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as speified

Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges fixed in repairs complete.

M&L PVC 'SWR' gully trap 125/110 mm setting and jointed with solvent cement complete all as specified

Supply & fixing Flush pipe of polyethylene for PVC, 32 mm dia for low level cistern in repairing to EWC or IWC including all necessary work reqd at site etc.

M&L for 20 mm bore Gun Metal Globe or Gate Valve with iron wheel head, screwed both ends for iron pipe and fixed in repairs

M&L for 25 mm bore Gun Metal Globe or Gate Valve with iron wheel head, screwed both ends for iron pipe and fixed in repairs

S&F for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) Vitreous China urinals, Half stall type (back to corner wall type), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. fixed in repair complete.

S&F urinal/WHB PVC waste pipe 32 or more mm bore suitable to waste coupling pipe screw type attach with rubber ring joints fixed to waste coupling.

supply and fixing anodized snap grid frame work size 605mmx605mm for false ceiling including necessary notching. The snap grid shall consist of aluminium main &cross tee of size 36.5x25x1.40mm weighing 0.24 Kg/RM and 23.5x26.4x1.40mm weighing 0.191 Kg/RM respectively. The main and cross tee shall be jointed at junction crossing with anodized aluminium angle bracket of size 15mmx15mmx1.5mm weighing 0.12 Kg/RM fixed with suitable MS bolts, nuts and washer. The snap grid (main/cross tee section) shall be supported at ends all along the wall with anodized aluminium angle of size 40x25x2mm weighing 0.36 Kg/RM fixed to wall with suitable arrangement and providing 12mm thick mineral fibre board of make armstrong in fixed in grid support with 2.50mm dia plain mild steel wire galvanised class 3 fixed in detached works etc to support snap grid, made of aluminium as per specification complete all as specified and directed by Engineer-in-charge.

M&L for welding in repairs n.exc 2.5 cm in length and not exceeding 6mm thick of metal complete all as specified and directed by Engineer-in-Charge.

Taking down carefully existing unserviceable batten/surface conduit/ concealed conduit aluminium point wiring (light, fan, bell/buzzer, socket or power) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, pendents, sockets, lamp holders, shades, fan regulators, light fittings, bells etc including sunken boxes and removing the retrieved materials from dismantling including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and as directed by the Engineer-in-Charge.

Taking down of unserviceable DBs/ switch fuses/ change over in sheet steel enclosure complete with MCBs /Fuses /grips any capacity after disconnecting all cables etc and removing from site and making good disturbed surface of wall, floor etc. complete all as specified and as directed by Engineer-in-Charge.

Point wiring with stranded copper conductor cable, 1100 volts grade (ISI marked) PVC FRLS cable of size 1.5 Sq mm stranded core in and including PVC conduit/casing capping with all fittings such as tees, bends etc terminating in MS sunken box/wooden box covered with and including 3 mm thick new bakelite laminated sheet top cover ‘Hylam’ for one fan or light or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.50 Sqmm PVC FRLS copper conductor cable, as earth wire to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.

All as per item No. 3 here-in-before but socket point on the same board

All as per item No. 3 here-in-before but socket point on independent board

Ditto- all as per srl item No 3 here-in-before but with multi stranded copper conductor cable, 1100 volts grade (ISI marked), PVC FR cable of size 2.5 Sqmm single core and including 2.5 Sqmm PVC FR single core copper standed conductor cable as earth continuity conductor to common earth and earth dolly for one 15 Amp socket outlet point on the independent board complete all as specified and as directed by Engineer-in-Charge.

Switch piano flush type, Single pole 5 Amps, one way ISI marked, complete all as specified and as directed by Engineer-in-Charge.

Switch piano flush type, Single pole 15 Amps, one way ISI marked, complete all as specified and as directed by Engineer-in-Charge.

Socket outlet 3 pin 5 amp flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge .

Socket outlet 3 pin 15 amp flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge .

Ceiling rose, 3 terminal PVC/ polycarbonate isolated body, ISI marked, complete all as specified and as directed by Engineer-in-Charge.

Fan regulator electronic type 230 Volts,150 watt with 5 step control suitable for 1200/1400 mm sweep ceiling fan, complete all as specified and as directed by Engineer-in-Charge.

S&F Lamp holder PVC/ polycarbonate insulated body with black plate for conduit / casing caping complete all as specified and as directed by Engineer-in-Charge .

S&F Top plug 5 Amps 230 V AC ISI Marked complete all as specified and as directed by Engineer-in-Charge

S&F Top plug 15 Amps 230 V AC ISI Marked complete all as specified and as directed by Engineer-in-Charge .

S&F in replacement single pole and neutral enclosure with two pin and earth plug and socket including 1Nos MCB of capacity 20 Amps complete all as specified and as directed by Engineer-in-charge.Make :- Havells/Indo Asian/SKF

Supply and fix MCB DBs single pole and neutral 8 way SPN 240 Volt single door complete all as specified and directed. Make :- Havells/Indo Asian/SKF

Supply and fix MCB DBs single pole and neutral 4 way SPN 240 Volt single door complete all as specified and directed. Make :- Havells/Indo Asian/SKF

Supply and fix flat Unarmoured cable of size 10 Sqmm 2 core complete all as specified and directed. Make :- Havells/poly cab/Nicco

Supply and fix unarmoured cable of size 6 Sqmm 2 core complete all as specified and directed. Make :- Havells/poly cab/Nicco

S & F in replacement bulk head luminaries suitable for CFL lamp 1 x 9 watt with plastic enclosures and opal acrylic diffuser, including CFL lamp complete including making connection with suitable size copper flexible wire all as specified and as directed by Engineer-in-Charge

Supply and Fixing MCB single pole, 240 volts of rating 6-40 Amps of C curve breaking capacity of 10 KA complete all as specified and as directed by Engineer-in-Charge

S&F isolator DP 32 Amps 240 volts complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing MCB suitable for 6 to 40 Amps, 240 Volt AC supply 'C' Curve single pole and neutral (SPN) with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge.

S & F in replacement of linear DLX decorative ultra slim linear LED light fitting with extruded aluminium heat sink, enviranment friendly energy efficient ready to use pack lamp type 18/20W LED 6K (4') type LHDD01102674 Make:- Halonex/Philips/ Havells

Supply in replacement of LED bulb of capacity 9 watt complete all as specified and directed. Make Havells/Philips/polycab.

Supply & Fix in replacementLED 2 x 2 recess mounted lumniaire 42 Watt, with Drive, connecter block, etc. complete with all accessories internally pre-wired and including connecting up 3 core sheathed copper flexible cable 1.5 sqmm up to light fitting and connecting testing complete fixed on false ceiling complete as directed by Engr-in-Charge. Make- Havells Cat No PLUTONEO2X2PLR42WLED857S of equivalent in Phillips/Wiprp

Supply & fixing Rigid non-metallic PVC conduit of size 20 mm dia inclusive of all tees, bends,elbows,juction box, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. all as specified and as directed by Engineer-in-Charge

Supply & fixing Rigid non-metallic PVC conduit of size 25 mm dia inclusive of all tees, bends,elbows,juction box, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. all as specified and as directed by Engineer-in-Charge

Supply & fixing PVC casing caping 20 mm inclusive of all tees, bends,elbows and fixing accessories such as couplers, lock nails, etc. all as specified and as directed by Engineer-in-Charge

Supply & fixing PVC casing caping 25 mm inclusive of all tees, bends,elbows and fixing accessories such as couplers, lock nails, etc. all as specified and as directed by Engineer-in-Charge

Supply & fixing PVC board suitable for one switch and socket of capacity 5 Amps all as specified and as directed by Engineer-in-Charge

Supply & fixing PVC board suitable for two switch and one socket of capacity 5 Amps all as specified and as directed by Engineer-in-Charge

Supply & fixing PVC board suitable for three switch and one socket of capacity 5 Amps all as specified and as directed by Engineer-in-Charge

Supply & fixing PVC board suitable for four switch and one socket of capacity 5 Amps all as specified and as directed by Engineer-in-Charge

Supply & fixing PVC board suitable for five switch and one socket of capacity 5 Amps all as specified and as directed by Engineer-in-Charge

Supply & fixing PVC board suitable for six switch and one socket of capacity 5 Amps all as specified and as directed by Engineer-in-Charge

Supply & fixing PVC board suitable for one switch and one socket of capacity 15 Amps all as specified and as directed by Engineer-in-Charge

Supply and Fixing PVC flexible pipe of size 20 mm dia including PVC clamp etc. complete all as specified and as directed by Engineer-in- Charge.

Supply and Fixing PVC flexible pipe of size 25 mm dia including PVC clamp etc. complete all as specified and as directed by Engineer-in- Charge.

Supply and fixing in replacement Switch socket combination 2 in 1, 5 A flush type with PVC board complete all as specified and as directed by Engineer-in- Charge.

Supply and fixing in replacement Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal with PVC board complete all as specified and as directed by Engineer-in- Charge.

Supply only PVC insulation tape for day by day complaint /maintenance all as specified and as directed by Engineer-in- Charge.

Supply only multistranded copper conductor of size 1.5 Sqmm single complete all as specified and as directed by eng-in-charge Make :- Polycab/Havells/Finolex

Supply only multistranded copper conductor of size 2.5 Sqmm single complete all as specified and as directed by eng-in-charge Make :- Polycab/Havells/Finolex

Supply and fixing in replacement new generation energy saving and enviromental friendly long life LED security light 40 Watt made up pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP66 protection and impact resistance of IK07 Make :- Havell/C&S/Surya

Supply only Switch piano, flush type single pole, one way 5 Amp for complaint/ maintenance all as specified and as directed by Engineer-in- Charge.

Supply only Switch piano, flush type single pole, one way 15 Amp for complaint/ maintenance all as specified and as directed by Engineer-in- Charge.

Supply only Socket outlet 2 in 1, 3 pin, 5 Amp for complaint/ maintenance all as specified and as directed by Engineer-in- Charge.

Supply only Socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type for complaint/ maintenance all as specified and as directed by Engineer-in- Charge.

M & L for taking down board / fittings fixtures indentifying and rectifing the complaints pertain to internal electrification of any type and nature of single living barracks / OTMs bldg, sub station, water supply installations and officers living accn and camp officers such as rectificaion of faulty electric circuits, tighting of loose wiring (concealed/condult/ casing and caping) . condult replacement and defective switch sockets, light fittings, replacement of broken hylam sheets, MCB's, main switches, DB's change overs etc all as directed by engineer-in-charge. (Note :- cost of minor stores such as screws, clamps, insulation tapes, nuts/ bolts etc. Shall be deemed included in the above quoted item, (II) cost of major items ie. LED tube,electronic ballast,switch,socket etc shall be measured and paid seprately under respective items. (iii) contractor shall received the complaints daily from the complaints cell (JE E/M) & rectifiying same day and submitt the complaints slips duly signed by the users. (iv) One complaints slip ( max no of complaints are four ) shall be the each job.

S&F in repair Thermostat switch I.S.I marked, to Geysers 25/50 ltrs Make : Alert/Theta /Bajaj.

Supply and fix in replacement heating element of rating 1.5 KW capacity including washers for 25 ltrs capacity Geysers.Make :- “THETA/ ALERT”

Supply and fix in replacement heating element of rating 2.0 KW capacity including washers for 50 ltrs capacity Geysers.Make :- “THETA/ ALERT”

Supply and fix in replacement Indicator lamps as per existing type having red or green coloured reflector all as specified and directed by Engineer-in-Charge

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by means of GI wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel up to 7.5 metre and connecting to earthing test point, main switch board or panel, testing on completion including GI pipe 20 mm dia light grade 30 cm above ground level with plug at top for watering and GI pipe 15 mm dia light grade for the protection of GI wire from earth pit to earth point complete including necessary excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50 m all as specified as shown in electrical plate No 3 SSR Part-I including testing on completion complete all as specified and as directed by Engineer-in-Charge. (Notes : - (i) G.I pipe 20 mm dia light grade from earth electrode upto main switch panel for protection of earth lead wire shall be deemed to be included in the unit rate quoted for earthing)

SHREE GURU NANAK CONSTRUCTION COMPANY

M/S Shree Ram Enterprises

VIJAY KUMAR SHARMA