Furnishing of Advocate General office building near HP High Court Shimla. (SH- Providing and fixing furniture articles.)

Amount

Providing Supplying and fixing at site Executive Table of Size 2100mm (W) X 900mm (D) X 750mm (H) with side unit of Size 1200mm (W) X 450mm (D) X 750mm (H) with three drawer Mobile pedestal, Executive Table:- Table top is made of 36mm thick Pre-laminated Medium Density Fiber Board marked IS: 12406( Interior grade) with 2mm thick PVC edge Banding fixed with Hot melt Glue of size 2100W X 900D X 36 thick, legs are made up of 25mm thick Pre-laminated Medium Density Fiber Board marked IS: 12406 (Interior grade) with 2mm thick PVC edge Banding, Modesty and other parts in 18mm thick Pre-laminated Medium Density Fiber Board marked IS: 12406( Interior grade) with 2mm thick PVC edge Banding, Modesty is made of designer PU cushioning, Side Cabinet:- Providing and fixing Side Cabinet of overall dimensions of cabinet are 1200W X 450D X 750H MM, cabinet top designed with 36mm thick rectangular Prelaminated Particle Board of marked IS: 12823( Interior grade) with 2mm thick PVC edge Banding fixed with Hot melt Glue of size 1200W X 450D X 36 thick, Side made of 18mm thick Prelaminated Particle Board, cabinet top with 2mm thickness flat edging. Metal Handle and 2 locks of the branded company as per given approved makes. 2 18mm thickness adjustable shelves. Metal shelf support. 18mm thickness Sliding Door Panels. Mobile Pedestal:- Providing and fixing Mobile Pedestal, overall dimensions are 450 mm length, depth is 600mm and height is 675mm, top designed with 25mm thick rectangular shape Prelaminated Medium Density Fiber Board marked IS: 12406 ( Interior grade) with 2mm thick PVC edge Banding fixed with Hot melt Glue, Side, Drawer Handle Panels made of 18mm Thick Prelaminated Particle Board. Metal handle, 01nos. lock and file drawer with full extension ball bearing slide, all parts as per approved makes. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site Single seater Sofa, Seat: wooden structure uphostered with leatherette & HD foam 32 softy. SS Chrome leg, Arm Rest : leatherite covered on solid wood structure, Understructure :solid wood structures with heavy quality spring for maximum comfort ,taper type 25 mm round spiral spring , legs: high quality cup shape ss chrome legs fitted , Max. Height 840 ±10, Depth 775 ±10, Width 900 ±10 , Seat Height from Ground 450 ±10, Overall Size 900 W x 775D x 840H mm. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site Two seater Sofa, Seat: wooden structure uphostered with leatherette & HD foam 32 softy. SS Chrome leg, Arm Rest : leatherite covered on solid wood structure, Understructure :solid wood structures with heavy quality spring for maximum comfort ,taper type 25 mm round spiral spring , legs: high quality cup shape ss chrome legs fitted , Max. Height 840 ±10, Depth 775 ±10, Width 1450 ±10 , Seat Height from Ground 450 ±10, Overall Size 1450 W x 775D x 840H mm The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site center table size 900x500x450mm wooden table with 8mm thick glass on top as per table design and all sides melamine polish. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site Executive High Back Revolving chair with Design on Headrest, Chair is made of single piece L-shape Hot Pressed plywood with High density Polyurathene foam minimum density 32 Kg/m3 upholestered with Good Quality Leatherete, Armrest is made of Metal chrome frame with Polished Wooden top, Torsan bar Mechanism with upright position locking, 100mm Class 4 gaslift with gas lift cover, Metal frame with wooden cladded pedestal/ base, nylon wheels, Overall Dimension 1230H x 680W x 680D. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site Executive Medium Back Revolving chair , Chair is made of single piece L-shape Hot Pressed plywood with High density Polyurathene foam minimum density 32 Kg/m3 upholestered with Good Quality Leatherete, Armrest is made of Metal chrome frame with Polished Wooden top, Torsan bar Mechanism with upright position locking, 100mm Class 4 gaslift with gas lift cover, Metal frame with wooden cladded pedestal/ base, nylon wheels, Overall Dimension 1140H x 680W x 680D. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site Three Seater Sofa: Supplying and placing at position a three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded. The frame shall be padded with high resilience polyurethane foam 80mm thick having density 40Kg/m³ in seat and 50mm thick having density 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam 19mm thick having density 40Kg/m³. The complete structure shall be upholstered with leatherite tapestry 1±0.2 mm thick and 571 GSM. The understructure shall be supported by pipe frame loop leg of SS shiny chrome finish having size 720mm X 535mm with cross-section area 40mm X 20mm with 1.6mm thick. There shall be shoe provided at the bottom to avoid scratches on the floor. The sofa overall length = 1450±10 mm, overall depth = 760±10 mm & overall height = 750±10 mm including carriage of materials in all leads and lift as per direction of Engineer in Charge.

Providing Supplying and fixing at site Providing and fixing Executive Table of Size 1500W X 750D X 750H MM with side unit of Size 900W X 450D X 750H MM with three drawer Mobile pedestal, Executive Table:- Table top is made of 36mm thick Pre-laminated Medium Density Fiber Board marked IS: 12406( Interior grade) with 2mm thick PVC edge Banding fixed with Hot melt Glue of size 1500W X 750D X 36 thick, legs are made up of 25mm thick Pre-laminated Medium Density Fiber Board marked IS: 12406( Interior grade) with 2mm thick PVC edge Banding, Modesty and other parts in 18mm thick Pre-laminated Medium Density Fiber Board marked IS: 12406( Interior grade) with 2mm thick PVC edge Banding. Side Cabinet:- Providing and fixing Side Cabinet of overall dimensions of cabinet are 900W X 450D X 750H MM, cabinet top designed with 36mm thick rectangular Prelaminated Particle Board of marked IS: 12823( Interior grade) with 2mm thick PVC edge Banding fixed with Hot melt Glue of size 900W X 450D X 36 thick , Side made of 18mm thick Prelaminated Particle Board, cabinet top with 2mm thickness flat edging. Metal Handle and 2 locks of the branded company as per given approved makes. 2 18mm thickness adjustable shelves. 18mm thickness Sliding Door Panels. Mobile Pedestal:- Providing and fixing Mobile Pedestal, overall dimensions are 400 mm length, depth is 485mm and height is 665mm, top designed with 25mm thick rectangular shape Prelaminated Medium Density Fiber Board marked IS: 12406( Interior grade) with 2mm thick PVC edge Banding fixed with Hot melt Glue, Side, Drawer Handle Panels made of 18mm Thick Prelaminated Particle Board. Metal handle, 01nos. lock and file drawer with full extension ball bearing slide, all parts as per approved makes. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site Executive Medium Back Revolving chair, Chair is made of double layered single piece L-shape Hot Pressed plywood with High density Polyurathene foam minimum density 32 Kg/m3 upholestered with Good Quality Leatherete, Fixed PU armrest, Regular tilt Mechanism with upright position locking, 100mm Class 4 gaslift with gas lift cover, Metal Chrome Base with nylon wheels, Overall Dimension 1220H x 700W x 700D, Back Width 500 ±10, Back Height 690 ±10, Seat Width 500 ±10, Seat Depth 490 ±10. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site Executive Visitor chair, Chair is made of double layered single piece L-shape Hot Pressed plywood with High density Polyurathene foam minimum density 32 Kg/m3 upholestered with Good Quality Leatherete, Fixed PU armrest, MS Chrome cantilever frame in 25mm x 1.6mm thick round pipe, Overall Dimension 950H x 700W x 700D, Back Width 500 ±10, Back Height 530 ±10, Seat Width 500 ±10, Seat Depth 490 ±10. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site Conference table of size 6600mm X 1840mm X 750mm is made of combination of Table and connection top, Table: Table top is made of 36mm thick Pre-laminated Medium Density Fiber Board marked IS: 12406( Interior grade) with 2mm thick PVC edge Beading fixed with Hot melt Glue , legs are made up of 25mm thick Pre-laminated Medium Density Fiber Board marked IS: 12406( Interior grade) with 2mm thick PVC edge beading, Modesty and other parts in 18mm thick Pre-laminated Medium Density Fiber Board marked IS: 12406 (Interior grade) with 2mm thick PVC edge Banding Connection Top : of Size 1840W x 900D Table top is made of 36mm thick Pre-laminated Medium Density Fiber Board marked IS: 12406 (Interior grade) with 2mm thick PVC edge Banding fixed with Hot melt Glue, legs are made up of 25mm thick Pre-laminated Medium Density Fiber Board marked IS: 12406 (Interior grade) with 2mm thick PVC edge beading, Modesty and other parts in 18mm thick Pre-laminated Medium Density Fiber Board marked IS: 12406 (Interior grade) with 2mm thick PVC edge banding. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site Conference chair, Medium back Revolving chair, Seat made of hot pressed plywood with PU moulded foam with Fabric upholestry, Back PP back with Mesh upholestry with Adjustable Lumber support, Fixed PU armrest, Torsan bar meshanism with Upright position lock, 100mm Class four Gaslift with Gaslift cover, MS chrome base with Nylon wheels. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site Conference Chair, Fixed Visitor chair, Injection moulded Polyproplene back with fixed Polypropelene handles, Hot pressed plywood with PU moulded foam with fabric upholestry, 25mm round pipe MS chrome cantilever frame. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site three seater lounger with cushion on seat and back. The seat and back shall be made up of high quality cold rolled MS perforated sheet of 1.2mm thick, pressed and welded to form the shape with cushion above it. The seat and back electrostatically coated with epoxy powder and then cured under heat to allow it to form a skin. The armrest shall be made up of mild steel powder coated tube with 1.2mm thick. The base structure shall be supported by MS powder coated with 50-60µ (DFT). There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 440±10 mm(D) X 405±10 mm(H) from ground. Overall height shall be = 425±10 mm, overall depth = 670±10 mm & overall length = 1800±10 mm. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site two seater lounger with cushion on seat and back. The seat and back shall be made up of high quality cold rolled MS perforated sheet of 1.2mm thick, pressed and welded to form the shape with cushion above it. The seat and back electrostatically coated with epoxy powder and then cured under heat to allow it to form a skin. The armrest shall be made up of mild steel powder coated tube with 1.2mm thick. The base structure shall be supported by MS powder coated with 50-60µ (DFT). There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 440±10 mm(D) X 405±10 mm(H) from ground. Overall height shall be = 425±10 mm, overall depth = 670±10 mm & overall width = 1200±10 mm . The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site center table size 900x500x450mm with teak wood frame, legs are of size 25 x 50mm with melamine polish, 10mm glass on top fixed with ss studs, 8mm glass on shelf fixed on the wooden frame, used solid wood should be seasoned wood of good quality with melamine polish. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site Executive Table set of Size 1500mm(W) X 11950mm (D) (1200mm+750mm) X 750mm (H) with attached Side unit of Size 1750W X 480D MM with three drawer Mobile pedestal, Executive Table:- Table top is made of 36mm thick Pre-laminated Medium Density Fiber Board marked IS: 12406 (Interior grade) with 2mm thick PVC edge Banding fixed with Hot melt Glue of size 1500W X 750D X 36 thick, legs are made up of 25mm thick Pre-laminated Medium Density Fiber Board marked IS: 12406 (Interior grade) with 2mm thick PVC edge Banding, Modesty and other parts in 18mm thick Pre-laminated Medium Density Fiber Board marked IS: 12406 (Interior grade) with 2mm thick PVC edge Banding attached Side Cabinet are of 1750W X 480D MM, cabinet top designed with 36mm thick rectangular Prelaminated Particle Board of marked IS: 12823 (Interior grade) with 2mm thick PVC edge Banding fixed with Hot melt Glue of size 1750W X 480D X 36mm thick, Side made of 18mm thick Prelaminated Particle Board, cabinet top with 2mm thickness flat edging. Metal Handle and 2 locks of the branded company as per given approved makes 18mm thickness adjustable shelves. 18mm thickness Door Panels. Mobile Pedestal:- Providing and fixing Mobile Pedestal, overall dimensions are 400 mm length, depth is 485mm and height is 665mm, top designed with 25mm thick rectangular shape Prelaminated Medium Density Fiber Board marked IS: 12406( Interior grade) with 2mm thick PVC edge Banding fixed with Hot melt Glue, Side, Drawer Handle Panels made of 18mm Thick Prelaminated Particle Board. Metal handle, 01No. lock and file drawer with full extension ball bearing slide, all parts as per approved makes. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site Two seater Sofa , Overall Dimension 1250W X 760D X 750H Seat: wooden structure uphostered with leatherette & HD foam 32 softy, SS Chrome leg, Arm Rest : leatherite covered on solid wood structure, Understructure : solid wood structures with heavy quality spring for maximum comfort ,taper type 25 mm round spiral spring, legs: chrome plated legs, Legs Height 100mm, Seat Height from floor 460mm. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site table size 900mm x 600mm x 750mm providing and supplying table 25mm thick plpb top and 18mm thick plpb legs and modesty all side 2mm thick edge banding in thorth feed edge banding machine and all cornners finished with smooth edges with wire manager hole. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site linear workstation 1050mm x 600mm x 750mm - in 60mm thick panel based partition system 1200mm high with double raceway and complete powder coated aluminum (internal + external) framework with metal keyboard tray and 3 drawer mobile pedestal size 400x450x680. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

curvilinear workstation 1500mm x1500mm x 600mm x 750mm in 60mm thick panel based partition system 1200mm high with double raceway and complete powder coated aluminum (internal+external) framework. with metal keyboard tray and 3 drawer mobile pedestal size 400mm x 450mm x 680mm. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site table of size 1200mm(w) x 600mm (d) x 750mm (h), table 25mm thick plpb top and 18mm thick plpb legs and modesty all side 2mm thick edge banding, all cornners finished with smooth edges, one drawer & one shutter made up of 18mm thcik prelaminated particle board with 2 mm thick edge banding with ss handle of approved make & lock, one side cable manager hole also required, storage size 400mm(d) x 485mm(d) x 665mm(h). The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site table size 1200mm x 600mm x 750mm providing and supplying table 25mm thick plpb top and 18mm thick plpb legs and modesty all side 2mm thick edge banding in thorth feed edge banding machine and all cornners finished with smooth edges. 3 mobile pedestal size of 400mm x 680mm x 450mm with wire manager hole. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site Revolving Chair, Injection moulded Polyproplene back with fixed Polypropelene handles, Hot pressed plywood with PU moulded foam with fabric upholestry, Regular tilt mechanism with Single position lock, 100mm class four lift with gaslift cover, PP with metal inserted base with Nylon wheels. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site canteen table of overall table top diameter 900mm, 25mm thiick plywood pasted with 0.6mm thick laminted sheet on top & o .5mm thick balancing on bottom side , overall height of the table is 750mm. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site canteen chair without arm ss pipe frame and leatherite tapestery. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site Single seater Sofa , Overall Dimension 890W X 760D X 750H Seat: wooden structure uphostered with leatherette & HD foam 32 softy, SS Chrome leg, Arm Rest : leatherite covered on solid wood structure, Understructure : solid wood structures with heavy quality spring for maximum comfort ,taper type 25 mm round spiral spring, legs: chrome plated legs, Legs Height 100mm, Seat Height from floor 460mm. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site Two seater Sofa , Overall Dimension 1450W X 760D X 750H Seat: wooden structure uphostered with leatherette & HD foam 32 softy, SS Chrome leg, Arm Rest : leatherite covered on solid wood structure, Understructure : solid wood structures with heavy quality spring for maximum comfort ,taper type 25 mm round spiral spring, legs: chrome plated legs, Legs Height 100mm, Seat Height from floor 460mm.The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site side table size 450x450x450mm with teak wood frame, legs are of size 25 x 50mm with melamine polish, 10mm glass on top fixed with ss studs, 8mm glass on shelf fixed on the wooden frame, used solid wood should be seasoned wood of good quality with melamine polish. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing Supplying and fixing at site performance hall stacking chairs, Seat & Back : Moulded PP Structure (Single piece moulded Seat & Back Shell ), Understructure : Fixed Type 19mm dia & 18 guage thick Round MS tube, Max. Height 780 ±10, Depth 490 ±10, Seat Width 440 ±5, Seat Depth 410 ±5, Seat Height from Ground 420 ±10, Back Width 440 ±5, Back Height 390 ±5mm. The work to be carried out at site as per approved drawing and matching to photograph of item annexed at Annexure "A", as per the sample of articles to be got approved in advance from the competent authority including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

METHODEX SYSTEMS PVT LTD