Const. of Lecture Hall Cum Libary Block at Govt. Degree College Beerwah, Budgam (FRESH)

Amount

Clearing jungle including uprooting of rank vegetation,grass, brush wood, trees and saplings of girth upto 30cm measured at height of 1m above ground level and removal of rubbish outside the periphery of the area cleared as directed by the site engineer complete..

Earth work in excavation by manual/mechanical means in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan/over areas (exceeding 30 cm and upto 1.5 m in depth,1.5 m in width as well as 10 sqm on plan ) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead of 5km from site /edge cutting or as directed by EIC. disposed earth to be leveled and neatly dressed in all kinds of soil including pumping out water caused by springs,tidal or river seepage,broken water means or drains and the like complete.

Providing and laying of stone soling hand packed dry including all carriage and cost of material involved complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) (crushed) including all carriages and cost of material involved.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering upto floor V level 1:2:4 (1Cement: 2 coarse sand: 4 grade stone aggregate 20mm nominal size) (crushed) including all carriages and cost of material involved.

Providing and laying cement concrete in retaining walls,return walls,walls(any thickness) including pilasters, attachedters,columns,piers,abutments,pillars,posts,struts,butteressses,string or laces,courses,parapets,coping,bed blocks,anchor blocks,plain window sills,sunken floors fillets etc.upto floor five level,excluding the cost of centring,shuttering and finishing in 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20 mm nominal size crushed including all carriages complete.

Providing and laying Reinforced cement concrete 1:1.5:3 (1 Cement: 1.5 coarse sand: 3 graded Stone aggregate 20mm nominal size) (crushed) in suspended floors, beams, columns, roofs, lintels balconies, landings and staircase excluding cost of centering and shuttering all work up to floor V level including all carriages and cost of materials involved up to site of work complete.

Providing and laying Reinforced cement concrete 1:1:2 (1 Cement: 1 coarse sand: 2 graded Stone aggregate 20mm nominal size) (crushed) in suspended floors, beams, columns, roofs, lintels balconies, landings and staircase excluding cost of centering and shuttering all work up to floor V level including all carriages and cost of materials involved up to site of work complete.

Centering and shuttering including strutting propping etc. and removal of form for foundation footings, bases of columns etc .for mass concrete including all carriages and cost of material involved.

Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, girders, bressumers and cantilevers, using 12mm ply.

Centering and shuttering including strutting, propping etc. and removal of form work for suspended floors, roofs, landings, balconies and access platforms,stairs,columns pilllars,piers,abuterments,posts and struts using 12mm ply.

Centering and shuttering including strutting, propping etc. and removal of form work for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using 12mm ply.

Centering and shuttering including strutting, propping etc. and removal of form work for Edges of slabs and breaks in floors and walls under 20cms wide

Reinforcement for RCC works including straightening, cutting, bending placing in position and binding all complete. Thermo Mechanically Treated bars. including all carriages and cost of material involved.

Supply and filling, watering and compacting of sand/ nallah muck/ GSB or equivalent under floors including all carriages and cost of material involved.

Brick work with common burnt clay FPS non modular bricks of class designation 75 upto floor V level in cement mortar 1:6 (1 cement :6 coarse sand) including all carriages and cost of materials involved upto site of work complete.

Half brick masonry with bricks of class designation 75 upto floor V level in cement mortar 1:3(1 cement:3 coarse sand) including all carriages .

Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Silver or imported kail wood including all carriages..

Providing and fixing of 40X5mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embeddings in cement concrete block 30X10X15 cm 1:3:6 mix ( 1 Cement : 3 Coarse sand :6 graded stone aggregate 20 mm nominal size) including all carriages and cost of materials involved.

Providing and fixing of 12 mm thick plywood/board(kit ply,Greenply,Century,Sarda,Mayur or equivalent) with nails etc as ceiling/partition of walls or equivalent work excluding cost of frame work including all carriages complete.

Providing and fixing 32 mm thick glazed shutters for doors,windows and clerestory windows using 10 kg/sqm(4 mm thick) float glass panels including ISI marked M.S pressed Butt hinges bright finished of required size with necessary screws Kail wood including all carriages.

Providing and fixing 32 m thick wire guaze shutters using galavanised M.S wire guaze of average width for aperture 1.4 mm in both direction with wire of dia 0.63 mm for doors,windows and clerestory windows with ISI marked M.S pressed bright finished butt hinges with necessary screws of required size including carriages complete kail wood .

Providing and fixing of 3.5mm thick ordinary sheet glass pans to windows and ventillator shutters embeded in putty and fixed with beadings including cost of nails etc and carriages complete

Providing and fixing 35 mm thick panelled door shutters of kail wood including ISI marked M.S prepared butt hinges bright finished of required size with necessary screw including panelling of prelaminated particle board with decorative lamination on both sides,Grade I,type II IS 12823 marked ,all complete including carriages as per direction of engineer-in-charge

Providing and fixing of Almunium hardware fittings to doors and windows of approved quality (ISI mark) approved by the site Engineer including all carriages.

Tower bolts 4"

Tower bolt 8"

Tower bolt 6"

Handles 4"

Handle 5 "

Handles 6"

L-Drop 12"

L-Drop 8"

Eye-hook 5"

Door stopper

Structural steel work welded in built up sections , trusses and framed work including cutting, hoisting, fixing in position & applying a priming coat of approved steel primer all complete including all carriages leads lifts etc.

Providing colour coated (HI rib)G. S. sheet roofing fixed with GI self screws with pvc caps of matching colour design and pattern as per directions of Engineer-in -charge bolts and nuts excluding the cost of purlins,rafters and trusses with 0.50mm thick including carriages all complete.

Providing coloured ridges /hips of width 60cm overall width plain GS sheets fixed with polymer coated J or L hooks , bolts and nuts 8mm dia GI limpet and Bitumen washers complete 0.50 mm thick including carriages Complete

Providing and fixing of plain eaves boarding 300mm x 40 mm (nominal size) imported kail wood incl cost of nails complete.

Providing & Fixing of 50x50 mm thick wooden cornice of budloo wood incl. all carriages complete.

Providing and fixing in position collapsible steel shutters with vertical channels 20* 10*2 mm and braced with flat iron diagonals 20*5 mm size with top and bottom rail of T-iron 40*40*6 mm with 40 mm dia, steel pulleys complete with bolts,nuts,lockingarrangement,stoppers,handles, including a priming coat of approved steel primer including all carriages

15 mm Cement plaster on the rough side of single or half brick wall of mix: 1:6(1 cement:6 coarse sand) including all carriages complete.

Providing and fixing Ist qualityCeramic glazed wall tiles confirming to IS : 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except begundy,bottle green,black of any size as approved by Engineer in charge in skirting ,risers of steps and dados over 12 mm thick cement Mortar 1:3(1 cement:3 coarse sand) and jointing with grey cement slurry @3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade (size of tile as specified by the site Engineer) including all carriages complete

Providing and fixing Ist quality Digital antiskid floor tiles confirming to IS : 13755 of minimum thickness 5 mm of approved make like NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except begundy,bottle green,black of any size as approved by Engineer in charge in skirting ,risers of steps and dados over 12 mm thick cement Mortar 1:3(1 cement:3 coarse sand) and jointing with grey cement slurry @3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade (size of tile as specified by the site Engineer) including all carriages complete

Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to 13:15622of approved make in all colours and shades, laid on 20mmthick cement mortar 1:4 (I cement :4 coarse sand)including grouting the joints with white cement andmatching pigments etc. including all carriages complete (Nitco,Orient,Kajaria,Somany)

P/F in position Granite of approved colour,shade and texture laid on 20 MM thick 1:3 cement mortar incl:filling the joints with cement grouting mixed with colour pigmentation complete.Pattern of shade ,design as per the direction of i/c site engineer including all carriages complete in stairs (risers and treads, skirting/dado etc)

Providing and applying white cement based putty (Birla or equivalent )of 2mm thickness over plastered surface to prepare the surface even and smooth including all carriages complete

Distampering with oil bound washable distamper of approved make 2 or more coats on new surface including priming coat etc including all carriages.

Providing & applying Exterior Rustic Texture Emulsion of thickness not less than 3mm over one cement based priming coat on new surface with rustic using exterior weather coated spray emulsion of specified colour & shade as per the choice complete including all necessary scaffolding etc including all carriages.

Finishing walls with weather resistant exterior Epoxy paint of approved brand,manufacture and shade (two or more coat on new work) over and incl:base coat of water proofing cement primer including all carraiges.

Applying priming coat on new wood and wood based surface with ready mixed wood primer including all carriages.

Preparing wooden based surfaces by knifing grey paste filler of approved brand & manufacture.

Painting with synthetic enamle paint on wood and wood based surface of approved brand,shade and manufacture(two or more coats on new suface) including all carriages.

Providing and applying two or more coats with Touch wood polish of approved brand and quality on wood and wood based surface incl:preparing the surface smooth complete job at site of work as directed.

P/L PVC conduits 2mm thick of Finolex, Ravindra, Polycab or equivalent make of following dia.

25 mm dia

32 mm dia

Deep junction box

Fan junction box

P/F in position 12mm thick imported panellig on walls,ceiling and soffit including cost of necessary adhesive & cost of nails etc.complete job. incl preparing the surface for final finish and touch wood polish on the sealer surface with spray gun for final finish all complete incl. cost of nails / screws to be approved by Engineer-in-charge including frame work with wooden scants and cost of nails complete including all carriages.

Cement concrete flooring 1:2:4 ( 1cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. Complete. 50 thick with 20mm nominal size stone aggregate(Crushed) including all carriages complete

P/making moulding to nosing of steps incl:rubbing,polishing and placing the colour strip between the layers complete job at site as directed.

Double moulding

Single moulding

P/F of 50mm dia stainless steel railing of 304 grade of hollow tube 1.6 mm thick of jindal/salem make or equivalent incl:welding and fixing with stainless steel machine screws for making required size and shape,buffing etc. complete and fixing stainless steel balusters upto 900mm height and S S tubes,three in one installed horizontally incl:cutting,welding,grinding to required shape and size by required steel dash fasteners,nuts, bolts,screws etc in floors and treads incl: providing S S shoe at each balusters complete as per archtectural drawings and as per directions of engineer in charge incl:cutting of granite/marble floors and fastening with lead grouting if required complete job at site of work including all carriages.

Add over item NO( 50) for main bluastter 150 mm

6 mm cement plaster for ceilings in 1:3 mix (1 cement: 3 sand) including all carriages.

12 mm cement plaster for outer walls in 1:4 mix (1 cement : 4 sand) including all carriages

Back filling with available earth around plinth incl:ramming,compacting etc as directed by the site Engineer

Dry random rubble masonry with hard stone in foundation and plinth using quarry stone with bond stone including all carriages.

15 mm cement plaster 1:3 (1cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including all carriages

Providing & laying of 25mm thick factory made cement concrete (silicon) paver block of M-30 grade made by block making machine with strong vibrator compaction and approved size & design/ shape laid in required colour incl. fixing with cement concrete and with marble strips raised to avoid accident / slip complete as per direction of Engineer-in-Charge incl all inclusive leads, lifts, loading , unloading cost & cariiage of material/ Head load complete job in all respects.

Providing & fixing of 40mm thick Wooden planks for Class Room Benches on top & sides of steel benches with Necessary steel screws complete job (1st Class Kail Wood) including all carriages.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions, at top, bottom and sides with required EPRM rubber/ neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.For fixed portion powder coated almunium (minimum thickness of powder coated 50 microns )

Providing & laying of PVC heavy duty pipes for external service/cross drainage pipes including excavation of trenches upto required depth & jointing of pipes with gasket & required adhesive including all carriages upto site of work and providing of sand cushion over the pipe surface complete job of approved quality. 250 mm dia including all carriages.

Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand), RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20mm nominal size), 200mm thick foundation concrete 1:4:8 mix (1 cement : 4 coarse sand; 8 graded stone aggregate 40mm nominal size), inside and outside plastering 12mm thick with cement mortar 1:3 (1 cement:3 coarse sand), finished with a floating coat of neat cement inside and rough plaster on outside and making channels in cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20mm nominal size), neatly finished complete as per standard design including excavation, refilling and disposal of surplus earth. Inside size 120x120cms and 90cms deep including SFRC cover 455x610mm internal dimensions total weight of cover and frame to be not less than 38 kg (wt. of cover 23 kg and wt. of frame 15 kg) including all carriages.

P/F of 12 mm thick Perforated board 600*600 mm as T-ceiling including providing and fixing of frame work made of special sections power pressed M.S sheet and galvanised in accordance with zinc coating of grade 350 as per IS:277 and consisting of angle cleats of size 25 mm wide *1.6 mm thick with flanges of 22 mm and 37 mm at 60 mm centre to centre shall be fixed in direction prependicular to G.I channel with connecting clips made out of 2.64 mm dia *230 mm long G.I wire at every junction including fixing the board with ceiling section complete including all carriages.

Supplying and fixing 50mm dia pipe 3mm thick incl cost of welding and Redoxide prime coat including all carriages.

Providing and fixing of steel ornamental vertical Posts of suitable length & section incl. cost of redoxide primer coat including all carriages.

Providing and fixing of 20mm dia 450mm long bolt full thread with nuts and washers for anchoring the structure incl welding the bolts at bottom with 20 mm flat iron strip of at least 200mm long complete job including all carriages.

P/F of framework in partitions/door shutters(including cost of hardware fittings) of 16G Powder coated section/intrusion of not more than 100mm any dimension including the cost of aluminums snap beadings, rubber gaskets, fixing angles, grooves plates as per requirement including P/F of 12mm thick prelaminated particle board in panels not more than 1.22m in height and/or 5mm thick float glass in panels, glass panels to be provided with plain/tinted/pattered plastic film of approved quality, shade, colour and pattern including carriages of all materials and disposal of rubbish/wastage as directed by the site Engineer including all carriages

Providing & fixing of over head almirahs/ cupboards made up of superior quality 19mm thick ply board with glazed shutters incl. P/F of hardware fittings viz handles, knobs, locks and catchers etc, complete & exterior faces shall be fully laminated with good quality mica of approved design and pattern incl P/F of wooden beadings at requisite edges, faces etc wherever required complete job as directed by site Engineer including all carriages.

Supplying and filling of good earth including digging earth carrying by lorry, placing, watering, dressing and ramming in layers not over 200mm thick and consolidation with PRR of 8-10 ton capacity including carriage of earth from approved source of supply to site of work complete including all carriages.

Providing / laying of GSB of specified size in layers not exceeding 22cm in thickness and maximum size of stone agg, not exceeding 90 mm including watering, spreading, and consolidation with PRR of 8-10 ton capacity including carriages of all materials with loading , unloading and staking complete

Supply and stacking of graded stone aggregate at site of size range 63-45mm with stone screening/Chippings 13.20mm size nominal size type A stone dust morum (Khak bajri ) at site including all Carriage and Laying water bound macadam with specified stone agg., stone screenings and binding material incl. Screening, sorting ,spreading to template and consolidation with PRR with 8-10 tone capacity etc. complete (Two layers)

Providing & fixing coloured rubber moulded Interlock Floor Paver Tiles 75 mm thick of approved quality over sand cushion of minimum 100mm incl. rubbing and cleaning and lifts & carriages from approved source upto site of work complete pattern and design approved by the Engineer In charge.

Supplying & Installation of Pre-cast Circular Ring type soakage pit minimum width of wall (core) shall be upto75mm including trench excavation. Height of Core shall be 200mm & oevrall diameter shall be not less than 900mm with cost & carriages of all materials involved complete job as directed by the site Engineer.

Providing and fixing of top RCC cover heavy duty over soakage pit complete job.36'' x 36'' including all carriages.

Providing and fixing of PVC soil/waste/ventellating pipes of Prince/Phenolex or equivalent make(Type-B) of following size as directed by the site Engineer including all carriages & fittings with or without access of any degree i.e. bends, junctions, cowels, offsets, access pieces, holder bats and structure steel fabricated supports, clamps or suspended pipes in ceiling, stays etc. and jointing with solvent/seal joints incl. cutting holes in walls and floors and excavation, refilling and disposal of surplus earth whenever required and making good the same ad directed.

150 mm dia pipes

110 mm dia pipes

75 mm dia pipes

50 mm dia pipes

Providing & laying all-round cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 stone aggregate 20mm and down gauge) 75mm in bed and pipe. For 160mm, 110mm and 75mm dia pipes under floor including centering & shuttering wherever required. Including all carriages and cost of material involved.

P/L/F heavy duty glass fibre reinforced PPR pipes and fittings of approved quality with solvent weld socket joints and necessary(female elbow fitting brass thread) such as sockets,nuts,elbows,bends,tees,reducers,enlargers,plugs,clamps,drilling holes in walls,slabs hydraulic testing complete job at site of work including all carriages.

16mm dia

20mm dia

25mm dia

32mm dia

40mm dia

50mm dia

Supply, installation, testing and commissioning of gunmetal, male or female threaded isolation control valve (Ball Valve), of approved quality confirming to IS 778, PN 10, with necessary specials, unions, nipple etc., to complete the job including all carriages.

Construction of brick masonry manhole with 75 class designation bricks in cement mortar in 1:4 mix over 200mm thick foundation concrete in 1:4:8 mix incl: nominal size of stone agg:40 mm thick crushed,inside and outside plastering in 1:3 mix-12mm thick with floating coat of neat cement incl:making necessary channels in cement concrete in 1:2:4 mix with nominal size of stone agg:20 mm thick crushed incl:cost of C I manhole cover and frame complete job at site including all carriages.

P/F white viterous china pedestal type water closet(English type w c pan) with low level 10 litre PVC flushing cistern with manually controlled device confirming to IS:7231 clamp and rubber adapter,bracket,CP screws and washers incl:abulution jet connection 1.2 mtr-40mm dia flush bend with all accessories complete job at site including all carriages.

P/F white viterous china water closet orrisa pan (Indian type w c pan) with low level 10 litre PVC flushing cistern with manually controlled device confirming to IS:7231 clamp and rubber adapter,bracket,CP screws and washers incl:abulution jet connection 1.2 mtr-40mm dia flush bend with all accessories complete job at site including all carriages.

P/F viterous china wash basin with pedestal of approved quality for wash basin completely recessed at the back of the reception of pipes and fittings complete job at site of work including all carriages.

P/F White viterous china Large Urinal 590mm x 375mm x 390mm of approved quality with partition as per product detail with Flushing system as per product detail with C I hangers,Bottle trap,waste coupling incl:cutting and making good the walls and floors wherever required of standard make or equivalent including all carriages .

Providing and fixing of CP fixtures of Jaguar /Hindware /Cera / Essel/Parko or equivalent make including jointing testing and making good to surface as directed by the site Engineer including all carriages.

C P WALL MIXER

C P BASIN MIXER

C P BIB COCK

C P ANGLE VALVE

C P WASTE 32MM

C P GRATING

C P LONG BEND

C P EXT NIPPLE

PVC WASTE PIPE

URINAL WASTE PIPE

PVC CONNECTION

TOWEL ROD

C P SOAP CASE

LOOKING MIRROR

URINAL SPLIDDER

C P H NIPPLE

URINAL BRACKETS

GEYSER 50L (JAgUAR/RACOLD/VENUS OR Equivalent)

Providing and placing on terrrace (at all floor levels) polyethene water storage tank ISI:12701 marked indicating the BIS License No with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and base support for tank(Sintex,Electroplat,Star,Lotus or equivalent having valid ISI license) including all carriages.

P/F including testing,commissioning water motor of approved quality and manufacture of 1 HP incl: all necessary connections,fittings etc.complete (Crompton Greaves or equivalent ) including all carriages.

ARIF JAN QADRI

M/S F. A. CONSTRUCTION COMPANY

ABDUL HAMID MIR