GE (N) P/TOKEN- 28 OF 2024-2025 REPAIR/ REPLACEMENT OF OLD UNSV CONVENTIONAL SWITCH SOCKETS WITH MODULAR FIXTURES AND ALLIED WIRING IN GE (N) PUNE

Amount

Attending the complaints of non functional ceilling/exhaust fan of any sweep and testing and repairing the ceilling/exhaust fan by replacing of fan condencer, fan regulator and connection wire etc. and making fan serviceable including checking the strengh of Clamp, down rod and provision of check nuts and split pin all as directed. (Note :- Item such as fan condenser, fan regulator, 1.5 sqmm, 3 core copper flexible cable shall be measured and paid seperataly as 'Supply Only'.)

Supply only fan condencer, 2.5 Mfd, 240 volts for ceiling/Exhaust fan including PVC clamp complete all as specified and as directed

Supply only fan condencer, 4 Mfd, 240 volts for ceiling/Exhaust fan including PVC clamp complete all as specified and as directed

Supply only copper conductor FRLS cable, 1.5 Sqmm, 3 core, 1100 Volt grade complete all as specified and as directed

Taking down ceiling fan of any size/ sweep for repair or taken to work - shop for rewinding and refixing the fan after rewinding, cleaning dust, oiling, greasing, servicing, etc as per existing & connecting flexible 3 core cable from ceiling rose to connector of fan, complete all as specified and directed by Engineer-in-charge (Note- Ball bearing, gun metal bush, rubber reel with clamp, nut-bolts, blade assy, outer body, canopy, rotor, stator etc shall be measured and paid separetaly as 'Supply Only' and rewinding item paid seperately under relevant item)

Supply only for brass GM bush suitable for fan any size complete all as specified and as directed

Supply only fan clamp with rubber reel insulator/ rubber bush, nuts, check nuts with bolts, washer and lock pin all as specified and as directed.

Supply only bearing No 6201/6202/6203 suitable for ceiling fans complete all as spcified and directed by Engineer-in-charge

Supply only blade assembly for 1200mm sweep ceiling fan made of galvanised Iron sheet with suitable gauge heavy duty duly welded with connecting brackets complete set of three numbers of make suitable to existing as per sample white in colour all as specified & directed by Engineer-in-charge .

Supply only Outer body of ceiling fan of make suitable to existing (as per sample) complete top and bottom with nut & bolt, made of aluminium alloy, heavy duty suitable to accomodate thev stator and rotor under item 7 and 8 above for ceiling fan 1200 mm sweep including cleaning all dust etc all as spcified & directed by Engineer-in-charge .

Material and labour for rewinding of ceiling fan of any size with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling and testing of size 1200/1400 mm sweep complete all as specified and as directed.

Material and labour for electronic PCB Card suitable for Bajaj energos BLDC ceiling fan 1200 mm sweep complete all as specified and as directed.

Supply and fix in replacement for ceiling fan down rods of 15mm bore GI pipe medium grade of 1Mtr/1.5Mtr/2Mtr length including welding and fixing with clamps and nut bolts etc at any height complete all as specified and as directed.

M & L for painting the ceiling fan of 1200mm sweep with one coat with white colour synthetic enamel paint by spraying and filling cavaties with filler, after cleaning all dust etc all as specified and directed by Engineer-in-charge.

Taking down Exhaust fan/ wall Fan of any size/sweep after disconnecting the electric wire from existing ceiling rose for repair/ replacing the under mentioned unsv spares and refixing the same after cleaning all dust, oil etc complete all as spcified and directed by Engineer-in-charge (Note :- Spares shall be measured and paid seperataly as 'Supply Only' and rewinding item paid seperately under relevant items)

Supply only Exhaust fan metal body assembly heavy duty with lowers and clamps 4/3 Nos suitable for 300mm sweep of make suitable to existing suitable to accommodate motor assembly complete all as specified and as directed.

Supply only Motor assembly complete with Armature (Rotor) unit and Field winding (Stator) unit with shaft heavy duty suitable for 300mm sweep exhaust fan metal body of make suitable to existing as per sample complete all as specified and as directed.

Supply only blade assembly with three blades heavy duty of metal suitable for 300mm sweep exhaust fan metal body of make suitable to existing as per sample including key bolt/ check bolt complete all as specified and as directed.

Material and labour for rewinding of exhaust fan upto 300 mm Sweep with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling and testing complete all as specified and as directed.

Material and labour for rewinding of exhaust fan of size 450 mm Sweep with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling and testing complete all as specified and as directed.

Supply and fix in repair for plastic body exhaust fan, AC single phase BLDC, 240 volts of size 150 mm sweep with louvers with necessary connection and replacement of flexible copper cable from ceiling rose including taking down existing complete all as specified and as directed. Make Bajaj, Ivory or equivalent of Make Automberg/ Havells/Usha

Supply and fix in repair for plastic body exhaust fan, AC single phase BLDC, 240 volts of size 200 mm sweep with louvers all as per Cat No. Maxma DX 8" of Make Bajaj or equivalent of Make Automberg/ Havells/Usha with necessary connection and replacement of flexible copper cable from ceiling rose complete all as specified and as directed. Make Bajaj, Ivory or equivalent of Make Automberg/ Havells/Usha

Supply and fix in repair for plastic body exhaust fan, AC single phase BLDC, 240 volts of size 250 mm sweep with louvers all as per Cat No. Maxma DX 10" of Make Bajaj or equivalent of Automberg/ Havells/Usha with necessary connection and replacement of flexible copper cable from ceiling rose complete all as specified and as directed.

Supply and fix in repair for metal body exhaust fan, AC single phase 240 volts of size 300 mm sweep with louvers of Make Bajaj Bahar or equivalent of Havells/Usha with necessary connection and replacement of flexible copper cable from ceiling rose complete all as specified and as directed.

Supply and fix in repair for metal body exhaust fan, AC single phase 240 volts of size 225 mm sweep with louvers of Make Bajaj Bahar or equivalent of Havells/Usha with necessary connection and replacement of flexible copper cable from ceiling rose complete all as specified and as directed.

Supply only Motor assembly complete with Armature (Rotor) unit and Field winding (Stator) unit with shaft heavy duty suitable for 450mm sweep Wall fan metal body of make suitable to existing as per sample complete all as specified and as directed.

Material and labour for rewinding of Wall fan of size 450 mm Sweep with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling and testing complete all as specified and as directed.

Attending the complaints of non functional and Preventive maintenance of storage type electric water heater (Geyser) of capacity 25/50 ltrs comprising of the following tasks at different locations of any make, complete all as specified and as directed.:-(a) Inspection of geyser after opening bottom cover plate.(b) Examine water tightness of storage tank.(c) Carry out operation of all stop cocks, pressure reducing valves, etc. to ensure free movement of the working parts.(d) Replace washers and glands of defective taps to ensure water tightness smooth functioning.(e) Inspect vent pipes and remove blockage obstruction if any.(f) Check and correct earth continuity of electrical items.(g) Check and correct temperature setting of thermostats and test its functioning.(h) Checking and adjustments of pressure reducing valves.(J) Checking of dead weight type high pressure release valve (PRV) by removing dead weight protection cleaning the seat and ensuring that the waste hole is not blocked / chocked. (k) Testing of Geysers after repairs/maintenance in all respect for proper functioning.

Taking down storage geyser of 25/50 litres capacity after disconnecting electrical connection from existing socket, removing the bolts and nuts from wall and disconnected inlet and outlet water connection for repair/ replacing the unsv items and assemble the same after making serviceable, cleaning dust including connecting flexible 3 core cable as required, with proper filling of glass wool as heat resistance material, suitable quantity etc and refixing the geyser at it's original location complete all as directed spcified by Engineer-in-charge (Note- Spare parts of geyser shall be measured and paid separetaly as 'Supply Only' under relevant item)

Supply and fix in replacement electric water heater, storage type steel body with S/Steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc

Supply only Heating element long length suitable for existing cylindrical type geysers all as per sample including rubber washers (ISI marked) of any type suitablt to existing geuser of capacity 1500 watts complete all as directed .

Supply only Heating element long length suitable for existing cylindrical type geysers all as per sample including rubber washers (ISI marked) of any type suitablt to existing geuser of capacity 2000 watts complete all as directed .

Supply only Thermostat ISI marked analog type & adjustable type suitable for the Geysers 25 ltrs/ 50 ltrs capacity, 20 Amps, 240 Volts AC, 210mm/300mm long or nearest size as per sample.

Supply & fix stainless steel flexible connections pipe with brass hexagonal adapters both side. Suitable for 15mm dia pipe 60cm long for HOT water as per requirement. Make : Jaguar/Havells

Supply & fix stainless steel flexible connections pipe with brass hexagonal adapters both side. Suitable for 15mm dia pipe 60cm long for cold water as per requirement. Make : Jaguar/Havells

Supply only Non-return valve 15mm dia of brass ISI marked as per requirement.

Supply only for indicators of Geysers of any capacity/ type as per requirement.

Supply only Cable PVC insulated 3 core 2.5 Sqmm with stranded copper conductor 1100 Volts grade from socket/switch to geyser as per requirement.

Supply only 3 pin plug top, 16 amp capacity, 240 VAC, heavy duty, ISI marked complete all as specified and as directed

Supply only for safety valve plug made out brass metal with fusible lead, inner thread type suitable for geyser of any type/ capacity complete all as specified and as directed

Supply only High pressure resistance inner body and Special enamel-coated inner tank complete for storage water heater 25 Ltr capacity any type (vertical/ horizontal) suitable for existing (make) water heater including PUF insulation all as specified.

Supply only housing assembly of storage water heater 25 ltr capacity suitable for installing heating element and thermostat (verticle and horizantal type) suitable for existing (make)water heater complete all as specified and as directed

Supply and fix in repair MCB Protected SRCD box 4 module 25 Amps with surface mounted PVC enclosure SRCD(socket residual current device) single pole with a three pin socket & top complete with 25 Amps MCB single pole. Make: Havells Cat part No DHDTCSN0251020 OR Equivalent C&S/Indo Asian/L&T/Bajaj/Legrand

Supply and fix in repair for casing and capping heavy duty, size 20mm with all fittings including removal of old unserviceable one complete all as specified and as directed

Supply and replace for single core cable PVC insulated FRLSH and unsheathed multistranded copper conductor of following size from point wiring/Submain wiring including removal old existing unserviceable one complete all as specified and directed.

(a) 1.5 Sq mm

(b) 2.5 Sq mm

(c) 4.0 Sq mm

Supply and fix in repair for Ceiling Fan of sweep size 1200 mm BEE Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) →, ISI marked and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. Make:- Bajaj , USHA , Havells, Orient

Supply and fix in repair for Ceiling Fan of sweep size 1400 mm Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) →, ISI marked and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. Make:- Bajaj , USHA , Havells, Orient

Supply and fix in repair for wall mounted fan of size 400 mm sweep BEE. ISI marked and connecting up including complete all as specified and directed. Note : a) Quoted Rate is deemed to inclusive of Stickering/Marking/writing of MES numbers in bottom of ceiling Fan as directed by Engr-in-Charge. Make:- Bajaj/ USHA / Havells.

Supply and fix in repair for wall mounted LED 20watts fitting complete operating on 230 volts with integrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make: Bajaj , Jaquar,Haonix etc.

S & F in repair for wall mounted 20 watts indoor Inverter batten with opal diffuser, IP 20, with 4 hrs back up with out put of 1800 lumens , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts complete all as specified and as directed. Make :- Halonix Cat part No. LED INVERTER BATTEN HLB-08-20-CW-INV or equivalent Philips

Supply & fix in replacment of old unserviceable decorative LED recess down llight of capacity 15W- Tunable smart colour temperatur, CCT controllable LED down lighters with remote control, with dimming and CCT change option from 2700K to 6500K. Housing made from poweder coated, cast aluminium housing, opaque diffuser for glare free and optimum light output complete with all accessories. Make: Shakti cat part No SZRDRMXO15-DTVT or equivalent.

Supply & fix in replacment of old unserviceable decorative wooden look wall mounted energy saving 03 watt or above LED bedside light fitting flexible and adjustable to any direction with integeral electronic driver complete with all accessories. Make: Bajaj , Jaquar,Haonix , philips etc.

Supply & fix in replacment of old unserviceable wall mounted 12 watt PICTURE LIGHT fitting flexible and adjustable to any direction with integeral electronic driver coccessories. Cat Part No GOLD 31403 of philips , Havells / Luker /Halonix

S & F in repair for recess mounted 2' x 2' square LED panel 36 watts, warm White, leek design aluminium housing, polycarbibate diffuser white powder coated finish operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed. Make- Halonix HLFPR22-11-36-CW-37mm, Philips RC383B LED 4000 PSU ODWH PIR, Jaquar LULTUI15 036XC.

S & F LED Inverter street light fitting 30 Watt 230V Inverter fitting . The fitting should have powder coated, pressure die cast Aluminium housing and heat resistant toughened glass with frame having better optics for uniform distribution complete all as directed Make Halonix OR EQUIVALANT IN Bajaj , Philips, Havells as approved.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fitting fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH Cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH Cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-

(a) One light / fan controlled by one switch one way.

(b) One light point controlled by two 2 way switch.

(c) Socket outlet 05 Amp on same board.

(d) Socket outlet 05 Amp on independent board.

(e) One bell / buzzer point controlled by one bell push

All as per item No 57 point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 Amp socket outlet point on independent board.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with GI sunken /surface boxes 1.2 mm thick, 60 mm deep with earth dolly duly as per site requirment , covered with modular white cover plate with frame suitable for modular switches, sockets, regulators including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

(a) One light / fan controlled by one switch one way.

(b) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(c) One bell point controlled by one, bell switch 5 Amps

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per Item No. 59 above but with multistranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly.

S&F modular switch 01 way 6 Amp , 01 module ISI marked complete

S&F modular switch 01 way 16 Amp , 01 module ISI marked complete

M&L for Modular bell push 6 amp 230 volt 50 hz AC supply one way, complete all as specified

S&F modular socket 6 Amp , 2 module ISI marked complete

S&F modular socket 6 / 16 Amp , 02 in 01 , 02 module ISI marked complete

S&F for modular step fan regulator 120 watt 2 module suitable for 230 Volt 50 Hz supply all as specified

Supply & fix CALL Bell ISI marked complete

S&F ceiling rose surface Bakelite 3 terminals 230V 50 Hz ISI marked.

S&F for Lamp holder, PVC/ Polycarbonate type with back plate suitable for angle/batten fitting completes all as specified.

S & F for VTPN DB Phase segregated double door vertical type 4 way 415 volts, 50Hz suitable for MCCB incommer IP 43 protection provided with insulated vertical phase busbars, blanking plates and circuit identification labels, double door with locking system including necessary provision for inserting the DBs for mounting in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.Make: C&S Cat Part No CSDBMCCB125PDDD04S or in equavalent in Legrand, Schneider, ABB, L&T

S & F for sheet metal enclosure MCB DB TPN 415 volts, IP 43 of 4 way made of CRCA sheet steel, powder coated provided with insulated phase busbars, neutral bar, shrouds, earth bars, cable ties, blanking plates and circuit identification labels with necessary electrical connection, double door with locking system including cement work for inserting the DBs for mounting in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.Make: L&T Cat Part No DBTPE004DD or in equavalent in Legrand, C & S,ABB, Schneider

S & F for sheet metal enclosure MCB DB SPN 12 way 230 volts, IP 43 made of CRCA sheet steel, powder coated provided with insulated phase busbars, neutral bar, shrouds, earth bars, blanking plates and circuit identification labels with necessary cement work and electrical connection, double door with locking system including necessary provision for inserting the DBs for mounting in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall or mounting on surface complete all as specified and as directed. Make: L&T Cat Part No DBSPN008DD or in equavalent in Legrand, C & S, Schneider, ABB

S & F for sheet metal enclosure MCB DB SPN 8 way 230 volts, IP 43 made of CRCA sheet steel, powder coated provided with insulated phase busbars, neutral bar, shrouds, earth bars, blanking plates and circuit identification labels with necessary cement work and electrical connection, double door with locking system including necessary provision for inserting the DBs for mounting in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall or mounting on surface complete all as specified and as directed. Make: L&T Cat Part No DBSPN008DD or in equavalent in Legrand, C & S, Schneider, ABB

S & F MCCB FP 415 volts of Breaking Capacity 25 kA with Thermal Magnetic Release without enclosure suitable for fixing on DB of capacity 100 Amps with extended terminals complete all as specified. L&T/C & S/Schneider/ABB/Havells

S & F for MCB TPN rated capacity 63 Amps, 415 Volts breaking capacity 10 KA complete all as specified and as directed. L&T/Legrand/C & S/Schneider/ABB/Indo Asian/Havells

Supply and fix for MCB SPN rated capacity 32 A, 240 V breaking capacity 10 KA complete all as specified and as directed.L&T/C & S/Schneider/ABB/Havells

Supply and fix for MCB SP rated capacity 5 to 32 A, 240 V breaking capacity 10 KA complete all as specified and as directed. L&T/C & S/Schneider/ABB/Havells

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated cable with multistranded FRLS copper conductor of size 4.0 Sq. mm nominal area and drawing through and including 20mm dia heavy duty non metallic rigid PVC conduit of white/ ivory colour and conduit accessories, ISI marked including one run of PVC insulated 4.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire complete all as specified and as directed. (Note- Two runs of 4.0 Sqmm main cable, one run of 4 Sqmm earth conductor and one run of PVC conduit will be measured as one unit) (To be carried out in HQSC)

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated cable with multistranded FRLS copper conductor of size 6.0 Sq. mm nominal area and drawing through and including 20mm dia heavy duty non metallic rigid PVC conduit of white/ ivory colour and conduit accessories, ISI marked including one run of PVC insulated 6.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire complete all as specified and as directed. (Note- Two runs of 6.0 Sqmm main cable, one run of 6 Sqmm earth conductor and one run of PVC conduit will be measured as one unit) (To be carried out in HQSC)

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

SBS Enterprises (BID ID -3207807)

Chaulya Enterprises (BID ID -3207975)

Star Electrical (BID ID -3207285)

PURVA ELECTRICALS AND ENGINEERS (BID ID -3214350)

Suchit constructions (BID ID -3214366)

GANGA ENTERPRISES (BID ID -3213550)

Akanksha Enterprises (BID ID -3208396)

RELIABLE ENTERPRISES (BID ID -3213982)

Mahindra Electric Stores (BID ID -3213988)