Renovation of Gait lab and other lab first and third floor in Library block CSIO Chandigarh

Amount

Half brick masonry with F.P.S. brick of class designation 7.5 First class in foundations and plinth/ superstructure in. Cement mortar 1:4 (1 cement : 4 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws

Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing ISI marked stainless steel butt hinges with necessary screws etc. complete. 100x58x1.90 mm.

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 50 mm

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing aluminium sliding door bolts, ISI marked poweder coated to required colour or shade, with nuts and screws(also powder coated) etc. complete : 250x16 mm

Providing and fixing aluminium tower bolts, ISI marked, powder coated to required colour or shade, with necessary screws(powder coated) etc. complete : 250x10 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed or powder coated to required colour or shade, with necessary screws etc. complete : 150x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed or powder coated to required colour or shade, with necessary screws etc. complete : 125 mm

Providing and fixing aluminium handles, ISI marked, powder coated to required colour or shade, with necessary screws (powder caoted)etc. complete : 100 mm

Providing and fixing aluminium hanging floor door stopper,powder coated to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

Providing and fixing aluminium casement stays, powder coated to required colour and shade, with necessary screws etc. complete.

Providing and laying vitrified floor tiles double charged in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) or with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. Including leveling of existing surface with P.O.P where ever required jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 800x800 mm(Kajria or equivalent )

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 800x800 mm(Kajria or equivalent )

15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand)

Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer’s specification. One or more coats on old work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : two coats on old work

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Taking out existing wooden and aluminium door/Cupborad/Window shutter and repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within CSIO : Of area 3 sq. metres and below

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within CSIO : Of area beyond 3 sq. metres

Dismentling of aluminium partition, shutters,false ceiling , pvc flooring,old plaster etc. including stacking of serviceable material and disposal of unserviceable material within CSIO as per direction of Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond CSIO for all leads including all lifts involved

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/Including filling of sapce between frame and wall with sealent appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) : For fixed portion . Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved makeconforming to IS: 733 and IS : 1285, fixed with rawl plugs and screwsor with fixing clips, or with expansion hold fasteners ncludingnecessary filling up of gaps at junctions, at top, bottom and sides withrequired PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling,C.P. brass / stainless steel screws, all complete as per architecturaldrawings and fiklling the gap between aluminium and wall with PU sealent the directions of Engineer-in-charge. (Glazing andpaneling to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision forfixing of fittings wherever required including the cost ofPVC / neoprene gasket required (Fittings shall be paid forseparately).Powder coated aluminium (minimum thickness of powder coating 50 micron).

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. Pre-laminated particle board with decorative lamination on both sides

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing aluminium double bend handle of size 180 mm with SS screws etc. complete as per direction of Engineer-incharge Powder coated minimum thickness 50 micron aluminium

Providing and fixing 19mm thick Mineral Fibre False Ceiling Tiles Armstrong ULTIMA RH95 or equivalent size 600 x 600 mm in true horizontal level suspended on inter locking metal grid SILHOUTTE (Armstrong or equivalent) within black reveal of hot dipped galvanized steel sections ( galvanized @ 170 gsm / sqm. ) consisting of main 'T' runner suitably spaced at joints to get required length and of size 15x38 mm made from 0.30 mm thick ( minimum ) sheet spaced at 1200 mm center to center and cross "T" of size 24 x 25 mm made of 0.30 mm thick ( minimum ) sheet, 1200 mm long spaced between main " T " at 600 mm center to center to form a grid of 1200 x 600 mm and secondary cross " T " of length 600 mm and size 24 x25 mm made of 0.30 mm thick (minimum ) sheet to be interlocked at middle of the 1200 x 600 mm panel to form grids of 600 x 600 mm and laying 19 mm thick mineral fiber false ceiling tiles of approved texture in the grid including, wherever , required, cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main " T“runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised level clips spaced at 1200 m center to center along main T , bottom exposed width of 24 mm of all T sections shall be pre - painted with polyester paint weight 15.38kg/m2 poll out strength 100kg, all complete at all heights as per specifications drawings Warranty certificate to be deposited issued by the company as per the direction of Engineer - in - charge

P/F vertical blinds of vista or equalent complete with fittings and fixing in position all complere as directed by Engineer in charge.

Providing and fixing Zebra blinds vista SHEER DIMOUNT blinds with Roller tube 40mm (C220gms/m) and control unit cloth mechanism, Idler of high strength reinforced plat, round type bottom rail & triangle type bottom rail, including valance rail 84.5mm width (320grm/m) ceiling rails installation bracket 1.8mm, ceiling bracket 1.8mm and operation chain with 6mm pitch of beads. End cap complete VISTA- ESSENTIAL SERIES.

Taking out Vertical/Zebra blinds & Refixing the same after making Necessary ajustment/Modification including of bottom blate, chain, rollers etc wherever required for blinds as per direction of Engineer in Charge

Providing &fixing aluminum composite paneling 3mm thick on wall, partition, facia ,column etc etc at required place as per direction of Engineer in-charge. The ACP be exterior grade of any metallic colour, Alstone, or equivalent on frame work 50x50x2mm (standard aluminums section). The aluminum section to be anchored to existing wall etc with screw, desh fasteners etc. The size, c/c spacing of ACP be as per the site adjustment but must be uniform spacing. The joints to be filled with silicon of DOW coming /wacker make.

Providing /Fixing 6 mm Ply on Existing Door/ Almirah and Cupboard Along with 1 mm Mica of required colour with favicol and SR 99 required shadeafter removal and refixing and complete as directed by Engineer in charge.

Taking out Existing False Celing and Modification in false ceiling by replacing existing tile where light was fixed accordingly making provision of light and fixing with aluminium Tee/angle and particle Board whereas required as per direction of Engineer in Charge (including the Cost of Tile & aluminum Tee)

Carrying out petty jobs of welding works with necessaqry tools, welding set & rods etc. for petty works at diffrent locations which can not be measured as directed by engineer in charge.

P/F of sun control film reflective type of M/s Garware Polyster Ltd. Or equilent on glasses of window/ doors of rooms all complete as directed by Engineer in charge.

P/F making sliding arrangements In Cupboard with steel U channel, rollers and frame with wooden board & handle etc to complete to make it functiona; as direction by engineer in charge Hettich make

P/F Wooden display wall unit for Television, outer size of unit 1820 mm X2060 mm and TV display size 1400X910mmto be fitted in recessed portion as per drawings . Bottom base of unit to be made in sal wood 50x50mm batten fitted with 18 mm thick water proof ply The recessed portion to be created by additional batten and ply on sides .All exposed surface to be fitted with 1 mm Mica of required colour and shade with favicol and SR 99 .The edges to closed with ply and mica all arounf and corner edge to fixed with teak moulding and polished and complete as per direction of engineer in charge

ELECTRICAL PART-Labour charges for dismantling of existing electrical point of light point, fan point, LP,PP, ceiling fan etc. including shifting of material from site to store as required.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel/ PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (i) Group-C (Note- Moduler box used for switches should have 25% extra space as required)

Wiring for circuit/ submain wiring alongwith earth wire with the 2X6 sq mm + 1X6 sq mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (Note:- this item includes PVC condute pipe + PVC wire)

Wiring for circuit/ submain wiring alongwith earth wire with the 2X4 sq mm + 1X4 sq mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (Note:- this item includes PVC condute pipe + PVC wire)

Wiring for circuit/ submain wiring alongwith earth wire with the 2X2.5 sq mm + 1X2.5 sq mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (Note:- this item includes PVC condute pipe + PVC wire)

Supplying and fixing 6 Module Modular base & cover plate on existing modular metal boxes etc. as required.

Supply and fixing of PVC modular Base & cover plate 6 to 8 module and blanking plate suitable for fixing in 105mmx50mm DLPU-PVC trunking for fixing the moduler switch and socket 5amp./15amp. Complete as required at site.

Supplying and fixing modular type 5/6 amps switch on the existing switch box/ cover including connections etc. as required.

Supplying and fixing modular type 15/16 amps switch on the existing switch box/ cover including connections etc. as required.

Supplying and fixing modular type 3 pin 5/6 amp socket outlet on the existing switch box/ cover including connections etc. as required.

Supplying and fixing modular type 6 pin 15/16 amp socket outlet on the existing switch box/ cover including connections etc. as required.

Supplying and Errection of Bakelite sheet of 2mm thick, ISI marked with cutting etc. anyone of make Heylem/Super Heylem.

Supplying and fixing of DLP U-PVC adaptable trunking system for installation base, covers, partition, finishing accessories & mounting wiring accessories for the size 105 X 50mm fitted on the tables or wall pillers etc as required.

Supply of full glow LED Fitting light size 2' x 2' aluminum body duly powder coated recessed type suitable for office use with full specification as below:- System Wattage :- 36watt Lumens:-3600 Lumens or more. UGR:-<19 Operating Voltage:- 230/250Volts, 50Hz. Warranty:- Minimum 2 Years or more. (Complete in all respect with driver etc and genuine certificate from local office of brand/ make of firm.)

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Supply of ceiling fan of size 1200 mm (48 Inch) with 5-Star rating with BLDC technology & Remote Control, white in color, single phase, 230/250 volts, 50Hz, complete in all respect any one of make CG/ USHA.

Supplying and fixing stepped type electronic fan regular on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25-32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc.as required.(Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

Supply and fixing of ceiling fan hook of M S with metal fasteners in RCC ceiling to install the ceiling fan as required in all respect.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. (Model should be approved before installation)

Supplying and fixing of 25mm medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing of 3 x 2.5 sq. mm FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing of 2 x 4 sq. mm FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing of 3 x 4 sq. mm FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.

Supply and fixing 20mm to 25mm PVC flexible pipe alongwith accessories on surface as required.

Telephone Part Supplying and fixing moduler Telephone socket outlet on the existing moduler plate and switch box including connections but excluding moduler plate etc. as required.

Supplying and drawing 4 pairs 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

ADIT FABRICATIONS

Pooja fibreglass industries

J P Constructions