Construction of Govt. ITI Building at Lachori in Tehsil Salooni District Chamba HP

Amount

Excavation in hilly area in all heights and depths and in all classification of soil by manual / mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/ wedging out rock (where blasting is prohibited) and their intermediate classification of soil , setting out true to the required line, grades, width, cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification section 300 and 1600 and sorting out useful material and stacking the same in all leads, lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber embankments for grade improvements and disposal of all surplus material to the approved dumping sites through all modes of transportation including head load of animals transport or mechanical means along with its levelling, fine dressing and hauling / carriage of machineries, material, tool equipments and safety measures. All useful material such as stone, shingles, aggregates and slates etcetra to be sorted out and stacked in proper stack. Recovery for useful stones of 274.83 (two hundred seventy four decimal eight three) cubic metre at the rate of Rs. 300/- (Rupees three hundred) only per cubic metre shall be effected from the contrcator,s bill on pro-rata basis as per actual quantity executed. Any loss to the public/ private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him in all case. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Earth work in excavation for structures in all depths as per drawing and technical specification clause 305 & 1603.4 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal in all lead and lift including dressing of sides and bottom and back filling in trenches with excavated suitable material. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side, water pollution etcetra and to protect stability of hill side rock shall be excavated with chiseling and wedging out rock (where blasting is prohibited). All earth work in cutting/excavation including rock excavation shall be carried out true to lines grades, side slopes, width, camber, super elevation and level as shown on the drawings or as directed by the Engineer-in-Charge including hauling and stacking of material useful for construction at suitable sites and safe disposal of unsuitable cut materials in specified manner, filling of unevenness blind age and finishing the road to specified dimension or as directed by the Enginer-in-Charge. If the foundation of the structure is in an area with stagnant water or water is met with in the excavation due to spring seepage rain and other causes it shall be removed by suitable diversion, bailing out or pumping as directed and the area of the foundation or embankment shall be kept dry. Any loss to the public or private property during the course of excavation shall be the whole responsibility of the contractor which shall have to be duly compensated by him at his own cost in all cases. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Excavation in drains and channels etcetra in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, blasting work both in soft and hard rock, chiesling / wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil, setting out ture to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable divertion pumping or bailing out and excavation shall be kept dry wherever required by the contractor at his own cost as directed by the engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping site including its stacking, leveling, dressing in all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machinaries and other incidentals to complete the work as per HPPWD specification 1990 Vol.I. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Excavation in foundation trenches, etcetra in all kinds of classification of soil such as pick work, jumper work, blasting work, jumper blasting work, hard blasting or conglomerate strata including chiseling or wedging out rock where blasting work is prohibited or any other mixed variety of soil including shoring, strutting de-watering and pumping or bailing out-water (surface and sub soil water) up to any depth and height and any quantum of water including slush which may arise during dewatering, removal of slush and stacking the serviceable and unserviceable material clear from the edge of excavation and then returning the stacked soil in 15 cm (Fifteen centimeter) layer when required into plinth, sides of foundation etcetera consolidating each deposited layer by ramming and watering then disposing of the surplus unserviceable excavated earth as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads and lifts and other incidental and all types of taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete in sub-structure as per drawing and MORD technical specification section 800,900, 1200 & 1600 nominal mix 1: 4: 8 (one cement: four sand : eight graded crushed/broken stone aggregate 40mm (forty millimeters) nominal size and curing complete including pumping or bailing out water, dewatering, removal of slush as required at site which may arise at the time of laying concrete complete for all heights/depths including the cost of form work in retaining walls, breast walls etcetera or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Back filling with granular material behind abutments, wing walls, return walls and retaining walls complete as per drawing and MORD technical specifications section 1200 & 1600 including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana toll tax, GST or other taxes imposed by the Goverment.

Providing and laying 100mm (one hundred millimeter) diametre PVC pipe weep holes in brick masonry/stone masonry, plain reinforced concrete, Abutments, Wing walls, Return walls and retaining/breast walls extended through the full width of the structure with slope I(V):20(H)(One vertical : Twenty Horizontal) towards draining face complete as per drawing and MORD technical specification section 700, 1200 and as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals . The rate is including GST, octroi, royality, Malkana, toll tax or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete in open foundation for all type of structure with plain cement concrete grade M-10( M- ten) nominal mix 1: :3:6 ( One cement : three sand : six graded crushed/broken stone aggregate 40mm (forty millimeter) nominal size on ground or under water and curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arrise at the time of laying concrete complete for all heights/ depths including the cost of form work as per drawings and MORD technical specification section 800, 900 & 1200 or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, GST tax or any other taxes imposed by the Government.

Preparation of sub grade by dressing to camber (Earth work for the cutting involved for Sub grade to be paid for separately depending upon the classification of soil) as per HPPWD specifications including hauling of material in all leads, lifts and other incidentals and as per the entire satisfaction and directions of Engineer-in-charge. The rate is including the octroi, royality, Malkana, toll tax, GST, sale tax or any other taxes imposed by the Government.

Consolidation of sub grade with power road roller including making good the undulation with earth or quarry soil and re-rolling the sub grade as per HPPWD specifications including hauling of material in all leads, lifts and other incidentals and as per the entire satisfaction and directions of Engineer-in-charge.

Providing, laying, spreading and compacting stone aggregates of 90 mm to 45mm (Ninety millimetre to forty five millimetre) size using stone screening type-A of 13.2mm (thirteen decimal two millimetre) for Grading- I @ 0.27 (zero point two seven ) cubic metre Per 10 (Ten ) square metre and binding material @ 0.08 (zero point zero eight ) cubic metre Per 10 (ten ) square metre to water bound macadam specification including spreading in uniform thickness, handpacking, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill up the interstices of course aggregate, watering and compacting to the required density grading I as per Technical Specification Clause 405 by manual means as per the directions of Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax , GST or any other taxes imposed by the Government.

Providing, laying, spreading and compacting by machanical means stone aggregate of size 63mm to 45mm ( sixty three millimetre to forty five millimetre) Grading-II [75mm consolidated thickness] to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 K.N. static roller in stages to proper grade and camber including applying brooming, stone screening type-B of size 11.2mm (Eleven point two millimetre) nominal size at the rate of 0.20 cum ( zero point two zero cubic metre) per ten square metre and binding material at the rate 0.06 cum (Zero point six cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per M.O.R.D. technical specifications section 400 including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax , GST or any other taxes imposed by the Government.

Providing, laying, spreading and compacting by mechanical means stone aggregate size 53mm to 22.4mm ( fifty three millimeter to twenty two point four millimeter) Grading-III [75mm( seventy five millimeter) consolidated thickness] to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (eighty to hundred) K.N. static roller in stages to proper grade and camber including applying and brooming, stone screening type-B of size 11.2mm ( eleven point two milimetres) nominal size at the rate of 0.18cum ( zero point two one eight cubic metres) per ten square metres to fill up the interstices of coarse aggregate, watering and compacting to the required density as per M.O.R.D. technical specifications section 400 including carriage of material within all leads, lifts and other incidentals The rate is including octroi, royality, Malkana, toll tax , GST or any other taxes imposed by the Government.

Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface with hydraulic broom and spraying primer at the rate of 0.85 kg./sqm. (Zero point eight five kilogram per square metre) using mechanical means as per MORD Technical Specification section 500 including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax , GST or any other taxes imposed by the Government.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion pressure distributor on the prepared surface of granular base treated with primer including cleaning of road surface with hydraulic broom and spraying tack coat at the rate of 0.275 kg (Zero point two seven five kilogram) per square metre using mechanical means as per MORD Technical Specifications section 500 including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax , GST or any other taxes imposed by the Government.

Providing laying and rolling of open graded Premix Carpet of 20mm (twenty millimeter) compacted thickness, composed of 13.2mm (Thirteen point two millimeter) to 5.6mm (five point six millimeter) aggregates at the rate of 0.27 cum (zero point two seven cubic metre) mixed with bitumen VG-10 (Viscosity Grade ten) at the rate of 14.60 kg (fourteen point six zero kilogram) per ten square metre of road surface, to the required line, grade and level to serve as wearing course on a previously prepared base including mixing and heating binder and aggregate in suitable hot mix plant, 30/40 (thirty oblique forty) tonne per hour capacity, transporting mixed material with tipper and laying with paver finisher and rolling with a three wheel 80-100 (eighty to hundred) kN static roller finished to required level and grade to be followed by seal coat of type-B complete as per MORD technical specifications section 500 or as directed by the Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax , GSTor any other taxes imposed by the Government.

Providing and laying Seal Coat for sealing the voids in bituminous surface laid to the specified levels, grade and cross fall using type-B, with bitumen grade VG-10 (Viscosity grade ten) at the rate of 6.80 kg (six point eight zero kilogram) premixed with 0.06 (zero point zero six) cubic meter of fine aggregate per 10 sqm (ten square meter), premixed in mini hot mix plant, transporting mixed material with tipper and laying of mixed material manually and rolling with three wheel 80-100( eighty to hundred) kN, static roller complete as per MORD technical specifications section 500 or as directed by the Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax , GST or any other taxes imposed by the Government.

Stone soling / boulder filling dry hand packed in under floor including watering, ramming , consolidating and dressed complete including carriage of material within all leads, lifts and as per the direction of Engineer-in-Charge and other incidentals. The rate is including octroi, royality, Malkana, toll tax , GST or any other taxes imposed by the Government.

Filling in plinth with sand under floors including watering, ramming , consolidating and dressed complete including carriage of material within all leads and lifts and as per the direction of Engineer-in-Charge and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crust stone agreegate 40 mm (forty millimetre) nominal size) excluding the cost of form work in foudation and plinth within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate is including royality, Malkana, Toll tax, sale tax, GST or other taxes imposed by the Government.

Random rubble masonry with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement: six sand : twelve graded stone aggregate 20 mm (Twenty millimetre) nominal size) racking out joints in cement mortar 1:6 (one cement : six sand) up to floor all level including carriage of material within all leads, lifts and other incidentals, as per the direction of the Engineer-in-charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of dry rubble stone masonry in breast wall and retaining walls revetment walls and parapets etcetera within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Foundation, footings, basis of columns etcetra and mass concrete including carriage of material within all leads , lifts and other incidentals and as per the direction of the Engineer-in-charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetra upto any thickness within all leads , lifts and other incidentals and as per the direction of the Engineer-in-charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights of floor within all leads , lifts and other incidentals and as per the direction of the Engineer-in-charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts, square, rectangular or polygonal in plan within all leads, lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses, plinth and string courses and the like within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls upto all width and heights within all leads, lifts and other incidentals and as per the direction of the Engineer-in-charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete 1:2:4 (1 cement : 2 Sand : 4 graded stone aggregate 20mm (twenty millimetre) nominal size) and curing complete excluding form work in Steps and the like as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength 20 N/mm2 (twenty Newton per millimetre square) with cement contents not less than 330 Kg/m3 (three hundred thirty kilogram per cubic metre) mechanicaly mixed and vibrated excluding cost of form work and reinfocement for reinforced concrete work in foundation, footing, basis of columns and the like and mass concrete including carriage of material within all leads, lifts and other incidentals and as per the direction of the Engineer-in-charge. The rate is including royality, Malkana, Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength 20 N/mm2 square (twenty Newton per millimetre square) with cement contents not less than 360 Kg/m3 (three hundred sixty kilogram per cubic metre) mechanicaly mixed , vibrated and curing complete excluding cost of form work and reinforcement in columns, pillars,posts and struts upto floor all level including carriage of material within all leads, lifts and other incidentals and as per the direction of the Engineer-in-charge. The rate is including royality, Malkana, Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 design mix to obtain the minimum compressive strength 20 N/mm2 (twenty Newton per millimetre square) with cement contents not less than 320 Kg/m3 (three hundred twenty kilogram per cubic metre) mechanicaly mixed, vibrated and curing complete excluding cost of form work and reinforcement in suspended floors, roofs, landings,shelves and their supports, beams,girders, bressumers and cantilever upto floor all level including carriage of material and within all leads, lifts and other incidentals and as per the direction of the Engineer-in-charge. The rate is including royality, Malkana, Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 design mix to obtain the minimum compressive strength 20 N/mm2 (twenty Newton per millimetre square) with cement contents not less than 320 Kg/m3 (three hundred twenty kilogram per cubic metre) mechanicaly mixed , vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in stair case (except spiral stair case) excluding landing, butt including preparing top surface and finishing of nosing etcetera complete upto all floor levels, including carriage of materials within all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 design mix to obtain the minimum compressive strength 20 N/mm2 (twenty Newton per millimetre square) with cement contents not less than 320 Kg/m3 (three hundred twenty kilogram per cubic metre) mechanicaly mixed and vibrated upto any thickness and upto floor all level including finishing the exposed surfaces with cement mortor 1:3 ( One cement isto three sand) to give a smooth and even surface including centering /form work and curing complete but excluding the cost of reinforcement including carriage of material within all leads, lifts and other incidentals and as per the direction of the Engineer-in-charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 design mix to obtain the minimum compressive strength 20 N/mm2 (twenty Newton per millimetre square) with cement contents not less than 320 Kg/m3 (three hundred twenty kilogram per cubic metre) mechanicaly mixed, vibrated and curing complete to give smooth and even surface including centering , shuttering etcetera but excluding cost of reinforcement in windows cill string course, moulding not excluding 15 cm ( fifteen centimetre) in girth and finishing of nosing upto all floor levels , including carriage of material within all leads, lifts and other incidentals and as per the direction of the Engineer-in-charge . The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-25(M-Twenty five) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty Newton per millimetre square) with cement contents not less than 360 Kg/m3 (three hundred sixty kilogram per cubic metre) mechanicaly mixed , vibrated and curing complete excluding cost of form work in walls (any thickness but not less then 0.10m thickness (Zero point one zero metre) attached pillasters and bases string courses etcetera from top of foundation level to floor all level and all heights including carriage of material within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying tor steel reinforcement of Tata/Sail for reinforced cement concrete work including bending, binding, cutting, Straightening and placing in position including cost of binding wire complete upto all floor level as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Second class brick work using Rat & trap bond common burnt clay building bricks as per Architectural Drawing in super structure above plinth level to floor all levels in cement mortar 1:6 ( one cement isto six sand) as per HP.PWD, specifications, approved drawings, designs, as per entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Brick masonry using second class common burnt clay building bricks in super structure above plinth level to all heights in cement mortar 1:6 ( one cement isto six sand) and curing complete upto all floor levels as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Half brick using second class common burnt clay building bricks in super structure above plinth level in cement mortar 1:4 ( one cement isto four sand) and curing complete upto all floor level as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. Channel section of ISMC and flat iron doors, windows and clerestory window frame manufactured from ISMC iron section 75x40mm (seventy five into forty millimetre) with MS flat iron section of 75x4mm (seventy five into four millimetre) including hinges, jambs, lock jamb,beed and if required angle thrashold of mild steel angle 50x25mm (Fifty into twenty five millimetre) welded or righdly fixed by machanical means, lugs with split end tails to each jambs including steel butt hinges 2.5mm (two point five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pre treatment of the surface as directed by Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing angle iron door, window, clerestory window frame manufactured from steel Angle iron section of 35x35x5mm/ 40x40x5mm ( thirty five into thirty five into five millimetre / forty into forty into five millimetre) single rebate and MS flat iron section of 50x4mm (fifty into four millimetre) thickness including hinges, jamb, lock jamb, beed and if required angle thrashold of mild steel angle 50x25mm (fifty into twenty five millimetre) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel but hinges 2.5mm (two point five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer-in-Charge and further as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals. The rate is including royality, Malkana, Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 40mm (forty millimetre) thick first class deodar wood shutters frame, panelled glazed or panelled and glazed shutters having in fill panel of 12 mm (twelve millimetre) thick prelaminated ( both side ) particle board panel below lock rail & 6mm (six millimetre) thick glazing with glass pane of modiguard / saint Gabian above lock rail for doors, windows and clerestory windows including black enamelled iron butt hinges with necessary screws complete as per specifications, approved drawing, design and as directed by Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including royality, Malkana, Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing factory made flush doors shutters 35mm (thirty five millimetre) thick commercial both side i.e. non decorative phenol bonded termite resistant and water proof cover of black board construction with full frame of first class hard wood and well matched commercial three ply veneer with vertical grain or cross band and face veneer on both side of flush door ISI marked IS: No. 2202 as per Architectural drawing , specifications, design and as per direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing factory made flush doors 35 thick (thirty five millimetre) mm of green ply covered with 3 mm (three millimetre) plastic sheet /aluminium sheet upto 100 cm (one hundred centimetre) height inside only commercial both side i.e. non decorative phenol bonded termite resistant and water proof cover of black board construction with full frame of first class hard wood and well matched commercial three ply veneer with vertical grain or cross band and face veneer on both side of flush door as per Architectural drawing, specifications, design and as per direction of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including royality, Malkana, Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 19 mm (nineteen millimetre) thick water proof termit resistant commercial board of uniply /centary ply/kit ply for SDB shutters of doors including fixing with nickle plated piano hinges with necessary screws complete including carriage of material within all leads, lifts and other incidentals and as per the direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing 40 mm x 3 mm ( forty millimetre into three millimetre) flat iron hold fast 40 cm (forty centimetre) long including fixing to frame with 10 mm ( ten millimetre) bolts, nuts steel plugs and embedding in cement concrete blocks 30 cmx30cmx15cm ( thirty centimetre into thirty centimetre into fifteen centimetre) in cement concrete 1:3:6 ( one cement isto three sand isto six graded stone aggregate 20 mm ( twenty millimetre) nominal size including carriage of material within all leads, lifts and other incidentals. The rate is including royality, Malkana, Toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and fixing rolling shutters of approved make made of 80 mm X 1.25mm (eighty millimetre into one point twenty five millimetre) M.S laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft, with brackets, side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring including carriage of material within all leads, lifts and other incidentals and as per the direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing factory made double steel window shutter side hung(one glazed and other wire gauge) of standard rolled steel section jointed metre rod welded with manufactured to relevent ISI standard specifications welded with steel plugs, screw or with clips or bolts and with special putty for glazed and wire guage shutters of IS: designation with metal beding on either side complete as per approved specification, drawing including priming coat of red lead paint including carriage of material within all leads, lifts and other incidentals as per the direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and fixing of 5 mm (five millimetre) thick glass panes of modiguard/saint/Gobain with putty and nails wherever necessary as per specifications, approved drawing, design including carriage of material within all leads , lifts and other incidentals and as per the direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. grill of required pattern in steel frame of window with M.S. flat, square or round bar with round headed bolts and nuts or by screws including carriage of material within all leads , lifts and other incidentals and as per the direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing of aluminium sliding door bolts of anodized colour and shade with bolts and nuts screws etetera complete having size 300x 16 mm ( three hundred into sixtten millimetre)as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing oxidizsed M.S. tower bolts (barrel type) of anodized transparent or dyed to required shade and colour with necessary screws etcetera complete 200x10mm ( two hundred into ten millimetre) as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals. The rate is including royality, Malkana, Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts (barrel type) of anodized transparent or dyed to required shade and colour with necessary screws etcettera complete 250x10mm ( two hundred fifty into ten millimetre) as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing aluminum handles of anodized transparent or dyed to required colour & shade with necessary screws etcetera complete 125 mm ( one hundred twenty five millimetre) as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals. The rate is including royality, Malkana, Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. handles of required colour & shade with necessary screws etcetera complete 100mm ( one hundred millimetre) as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidental. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing bright finished brass 100mm (One hundred millimetre) Mortice latch and lock and a pair of levers, handles with necessary screws etcetera complete (Indian make of approved quality) within all leads, as per the direction of the Engineer-In-Charge and other incidentals. The rate is including royality, Malkana, Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. single acting spring hings with necessary screws etcetera complete with in all leads and lifts and other incidentals and as per the direction of Engineer-in-Charge. The rate is including royality, Malkana, Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 250mm (Two hundred fifty millimetres) M.S. bright finished hard drawn hooks and eye within all leads and lifts and other incidentals as per the direction of the Engineer-In-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 50 mm (fifty millimetre) cup board knobe with necessary screws within all leads and lifts as per the direction of the Engineer-In-Charge.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 19mm (nineteen millimeter) thick water proof termite resistant commercial board box and its shelves including 19mm (nineteen millimeter) thick commercial board shutter with back side of the cabinet of 8mm (eight millimeter) thick ply and all cut portion of the shelves to be finished with 6mm (six millimeter) thick hard wood edging & the shutter from the out side shall be finished with 1 mm (one millimetre) thick lamination of approved shade complete including piano hinges and other accessories, as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads, lifts and other incidentals. The payment shall be made for outer face only).The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing ready made M.S. railing of 40 mm dia (forty millimetre) MS hollow pipe(D) section welded with horizontal MS flat 40x4 mm throught over ballusters of 20mmx20mm (twenty millimetre into twenty millimetre ) and 12x12mm (twelve millimetre into twelve millimetre) size MS (mild steel) solid square bar in combination with MS flat 40x4 mm (forty into four millimetre) for stair case with a clear height of 85 cm (eighty five centimetre) embedded in cement concrete steps and jointed with electrical/gas welding with priming coat of red lead paint as per drawing, specification and as per direction of Engineer-in Charge, including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing railing for ramp 50 mm (fifty millimetre) dia MS (mild steel) hollow pipe hand rail slip resistant with round end at two levels at 75 (seventy five) and 90 cm(ninety centimetre) height having balluster of 25mm (twenty five centimetre) diametre hollow M.S. pipe (ISG-18 (eighteen) gauge with a clear height of 75(seventy five) and 90 cm(ninety centimetre) as per detail at the rate of 60 cm(sixty centimetre) centre to centre embedded in cement concrete steps and jointed with electrical gas welding at top alongwith hand rail of hollow M.S. pipe with slip resistance 50mm(fifty millimetre) dia. (ISG-18) Vertical balluster welded or jointed with each other with 2 Nos. (two number)M.S. flat of 50x5mm(fifty into five millimetre) complete and applying a coat of red lead paint as per specification approved drawing, design and direction of Engineer-in-Charge. Including carriage of material within all leads , lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing fiber cement board ceiling tiles of Everest size 600x600mm (six hundred into six hundred ) over ready made power coated metal sheet section frame work 600 mm (six hundred ) centre to centre gird suspended from ceiling complete with butter fly clips and hunger etcetera as per required pattern complete as per specifications detailed drawing, design and direction of Engineer in charge. Including carriage of material within all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 12mm (twelve millimetre) thick green chalk board and 6mm (six millimetre) thick on wall of size 210x105cm (two hundred ten into one hundred five centimetre) clear size as per Architectural drawing No. 27 (twenty seven) Job No. CZ-160 (one hundred sixty) including painting the board and inner side of frosted glass with green paint and fitting the same on walls complete as per direction of Engineer in charge. Including carriage of material within all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 25 mm ( twenty five millimetre) thick kota stone flooring (22"x22"size) 20 mm (twenty millimetre) thick base of cement mortar 1:4 ( one cement isto four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of kota stone including rubbing and polishing to granolithic finish upto all floor level, as per HP.PWD specifications, approved drawings, design, as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 25 mm ( twenty five millimetre) thick kota stone flooring of uniform half rounded nosing on steps of stair etcetera laid over 20 mm (twenty millimetre) thick base of cement mortar 1:4 ( one cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of kota stone including rubbing and polishing to granolithic finish and upto all floor levels as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

40 mm ( forty millimetre) Cement concrete flooring 1:2:4 ( 1 cement : 2 sand : 4 sand) crushed stone aggregate 20 mm (twenty millimetre) nominal size laid in one layer finished with a floating coat of neat cement as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Cement plaster skirting (upto 30cm (thirty centimetre) height) with cement mortar 1:3 (one cement : three sand) finished with a floating coat of neat cement including rounding of junction with floors 20mm (twenty millimetre) thick including carriage of material with in all leads, lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying automatic Hydraulically compressed precast terrazzo tiles 20mm (twenty millimetre) thick with marble chips of specified size laid in floors, treads of steps and landing on a bed of 25mm (twenty five millimetre) average thickness of cement mortar 1:6 (1 cement : 6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (Wherever required) including rubbing and polishing complete with tiles of approved shade as per approved specifications, drawing including carriage of material with in all leads, lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying automatic Hydraulically compressed precast terrazzo tiles 20mm (twenty millimetre) thick (with marble chips of specified sizes) in skirting and risers of steps not exceeding 30 cm (thirty centimetre) in height on 10 mm (ten millimetre) thick cement plaster 1:3 (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles approved shade as per specifications, approved drawing including carriage of material with in all leads, lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 2mm (two millimetre) thick PVC antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to paid for sepatately as per specifications, approved drawing including carriage of materials with in all leads, lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 10 mm ( ten millimetre) water proof stain and impect resistance heavy duty verified tiles of Nitco / Kajaria /Orient Bell/ Johnson 600x600 x10 mm ( six hundred into six hundred into ten millimetre) manufactured of approved shade and colour in flooring ,treads of steps and landing laid over 12 mm (twelve millimetre) thick cement mortar 1:3 ( one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per specifications, approved drawing and design including carriage of material and with in all leads , lifts and other incidentials and as per the direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying vertified tiles (300x300mmx10mm) (three hundred into three hundred into ten millimetre) of Nitco/Kajaria/Orient bell/Johnson on dedo wall of approved shade laid over a bed of 12mm (twelve millimetre) thick cement mortar 1:3 (1 cement : 3 sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles as per specifications, approved drawing, design including carriage of material complete with in all leads, lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying anti skid (Non- slipery) of ceremic tiles Nitco/ Kajaria/orient Bell/johnson in flooring 300x300 mm ( three hundred millimetre into three hundred millimetre) size in treads of steps laid on a bed of 12 mm ( twelve millimetre) thick cement mortar 1:3 ( one cement into three sand) finished with flush pointing in white cement as per specification, approved drawing including carriage of material with in all leads , lifts, as per the direction of Engineer-in-Charge and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying white glazed tiles of Nitco/ Kajaria / orient- Bell /Johson or Well orient tiles 5.5mm (Five point five millimetre) thick in dudo wall having 300x300 mm (Three hundred into three hundred millimetre) size laid on a bed of 12mm (Twelve millimetre) thick cement mortar 1:3 (1 cement : 3 sand) finished with flush pointing in white cement as per specifications, approved drawing including carriage of material and other incidentals with in all leads , lifts as per the direction of Engineer-in-Charge .The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying red sand stone slab flooring 40mm (forty millimetre) average thick laid on 20mm(twenty millimetre) average thick base of cement mortar 1:4 (1 cement : 4 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish finish complete upto all floor levels including carriage of matrial and other incidentals, with in all leads, lifts as per the direction of Engineer-in-Charge.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimetre) thick pre-painted sheet of Tata durashine/Sail in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (Five) micron primer coating to back coat of polyster of 10 (Ten) micron over 5 (five) micron primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm(six millimetre) dia metre with pre-painted limpet and rubber washers complete with all accessories as required as per specifications, approved drawing, design and as per the direction of Engineer-in-charge and further including carriage of material within all leads, lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimetre) thick pre-painted steel sheet ridges or hips having proper Gola shape 60 cm (sixty centimetre overall with 0.60 mm (zero point sixty millimetre) thick prepainted sheet of Tata durashine /Sail for roofing with hot dipped metallic, zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (five) micron primer coating to back coat of polyster of 5 (five) micron over 5 five) microns primer coating including fixing and screw prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with accessories as required as per specifications, approved drawing , design and as per the direction of Engineer-in-charge, including carriage of material within all leads , lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 0.60mm ( zero point six zero millimetre) thick pre-painted steel sheet valley 90 cm (Ninety centimetre) overall of Tata Durashine/ Sail for roofing with hot dipped metallic zinc coated sheet with top coat of regular modified (RMP) organic coating of 5 (Five) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing and screw prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with pre-painted limpet and rubber washers complete with all accessories as required as per specifications , approved drawings, design as per the direction of Engineer-in-charge, including carriage of material within all leads, lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimetre ) thick pre-painted steel sheet flashing of Tata Durashine/Sail 38 cm (thirty eight centimetre) overall in roofing with hot dipped metallic zink coated sheet with top coat of regular modified (Polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five ) microns over 5 (five) micron primer coating including fixing and screw prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with pre-painted limpet and rubber washers complete with all accessories as required as per specification, approved drawing, design as per the direction of Engineer-in-charge, including carriage of material within all leads, lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 30x30 cm (thirty into thirty centimetre) 0.60 (zero point six zero millimetre) thick plain G.I. (galvinized iron) sheet gutter having dome shape grating and fixed with bolts , nuts and washers etcetera including making necessary connection with rain water pipe complete as per specifications ,approved drawings, design with all accessories as required as per the direction of Engineer-in-charge , including carriage of material with in all leads, lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing on wall face PVC (D-Plast) rain water pipe of Supreme /Finolex/Prince including fitting the joints with adhesive 150mm(one hundred fifty millimetre) diametre pipe having working pressure not less than 4.00 kg/ cm2 (four kilogram per centimetre square) with all accessories as required as per the direction of Engineer-in-charge.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing on wall faces 150mm ( one hundred fifty millimetre )diametre PVC (D-Plast) plain bend of Supreme/Finolex/Prince having working pressure not less than 4.0 kg/cm2 ( four point zero kilogram per centimetre square) for rain water pipes including filling the joints with approved adhesive complete with all accessories as required as per the direction of Engineer-in-charge.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing on wall faces 150mm ( one hundred fifty millimetre ) diametre PVC (D-Plast) shoe of Supreme/ Finolex/{rince for rain water pipes including filling the joints with approved adhesive complete with all accessories as required as per the direction of Engineer-in-charge.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. BP Sheet 2 mm ( two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separately) as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in beams, joists, channels, angles, tees, flats with connection plates or angle cleats as in main and cross beams, hip and jack rafters purlins connected to common rafters and the like as per approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing glass reinforcement concrete (GRC) Jali of approved size, pattern design thickness and colour of Unistone/NTC make . The Jali/screen should be made from 53 (fifty three ) grade white Portland cement ,quartz, fine, silica, sand, Alkali resistant glass Fiber manufactured by Saint Gobain or equivalent supper plasticizers manufactured by BASF or equivalent polymers manufactured by BASF and UV resistant synthetic inorganic pigments should be used for pigmention manufactured by BAYFERROX (Gremany) or equivalent. The material casting should take place in synthetic rubber/FRP mould manufactured by RECKLI or equivalent. The fixing of screen should be dry finishing i.e. to done with stainless steel (SS-304) L shaped clamps, dash fasteners and pins as per design, specification and approved drawing and as per instruction of Engineer-in-charge including carriage of material with in all leads, lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing GI pipe 100 mm ( one hundred millimetre) dia at the rate of 12.20 Kg ( twelve point two zero kilogram) per Rmt including cutting, hoisting, fixing in position and applying a priming coat of red lead paint as per design and direction of Engineer-in-charge including carriage of material with in all leads, lifts and other incidentals. The rate is including royality, Malkana, Toll tax, sale tax, GST or other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint of Asian /Nerolac brushing finish oil glass to give as even shade including cleaning the surface of oil dirt- dust and other foreign matter asper specification and as per direction of Engineer-in-charge including carriage of material with in all leads, lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink of asian/Nerolac including carriage of material within all leads , lifts, as per direction of Engineer-in-Charge.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Painting two or more coats ( excluding priming coat ) on new wood and wood based surface with enamel paint of Asian/Nerolac to give an even shade including cleaning oil, dirt, dust, etcetera including carriage of material within all leads, lifts and as per direction of Engineer-in-Charge.The rate is including royality, Malkana, Toll tax, sale tax, GST or other taxes imposed by the Government.

6 mm thick (six millimetre) cement plaster to ceiling in cement mortar 1:3 ( one cement isto three sand ) upto all floors level as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

20mm (twenty millimetre) Cement plaster in pattern in two coats,backing coat 10mm ( ten millimetre) and finishing coat 10mm (ten millimetre) thick on fair side of brick/stone masonry walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with 1:4 (one cement isto four sand)as per specifications, approved drwaing, desgin and as per the direction of Engineer-in charge including carriage of maienal within all leads, lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm ( fifteen millimetre) thick cement plaster in single coat on the rough side of brick /concrete/stone / walls for interior plastering upto floor all level including arrises internal rounded angles, chamfers or rounded angles not exceeding 80 mm ( eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 ( one cement isto six sand) upto all floor level as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm ( fifteen millimetre) thick cement plaster in single coat on the fair side of brick /concrete/stone / walls for interior plastering upto floor all level including arrises internal rounded angles chamfers and or rounded angles not exceeding 80 mm ( eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement isto six sand) upto all floor level as per specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge, including carriage of material within all leads, lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm (fifteen millimetre)cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering including arrises, internal rounded angles, chamfers /or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:3 (1 Cement : 3 Sand)including carriage of material within all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Finishing wall with weather proof exterior grade emulsion of approved brand Apex of Asian paint/ Nerolac paint /Berger paint and final finish of required shade on undecorated wall surfaces (two coats)to give an even shade after thoroughly brushing the surface to remove all dirt, dust other foreign matter etcetera as per specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge , within all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Finishing wall with Satin enamel paint of Asian/ Nerolac/Berger paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered material as per specifications, approved drawings, designs, including carriage of material with in all leads, lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Distempering (two coats) with synthetic acrylic distemper Asian/Nerolac /berger Paint of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth as per specifications, approved drawings, designs including carriage of material with in all leads, lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose material and other foreign matters sand papered smooth to give final matt finish to the surface complete.as per specifications, approved drawings, designs including carriage of material with in all leads, lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Distemper with oil bound washable distemper (two coats) of approved brand of Nerolac/ Asian/Berger paint and of required shade on undecorated wall surfaces to give an even shade including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth upto all floor levels , as per specifications, approved drawings, designs including carriage of material with in all leads, lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing Plinth protection with 40 mm (Fourty millimetre) thick interlocking paver blocks and 23 cm (twenty three centimetre) diametre half round R.C.C. pipe for drainage purpose fixed over 10 cm (ten centimetre) cement concrete 1:4:8 (one cement isto four sand isto eight graded/crushed stone aggregate) 40mm nominal size for bedding / haunching of pipe including carriage of material within all leads and lifts of material and other incidentals as per specifications, approved drawing, design and as directed by the Engineer in charge.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 40mm dia (D Section) M.S. hollow pipe parapet railing 60 cm height or as per architect drawing, design welded with 19x19mm and 12x12mm solid square balusters fixed over RCC coping @ 60cm C/C in combination and joining with electrical gas welding at top alongwith M.S hollow pipe with 2.0 Nos M.S. flat of 50x50mm complete as per approved drawing , design and specification. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing of expension joint system related with wall joint (internal/external) location as per drawing and direction of Engineer-in-charge. The joint shall be filled up with polysterene back or rod base members, self alinging/centring arrangement and support. The material shall be of such that it provides an Expansion joint system suitable for vertical wall/ wall corner application, application, both new and existing construction in office building & complexes with no sliping down tendency amongest the components of the joint system. The joint system shall utilize light weight with polystrene back or rod surfaces mechanically snap locking the multicellular to facilitate movement including carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-in charge. The rate is inclusive of octroi, royality, Malkana toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Dr. Fixit Torch shield (P-3160-3mm)(Three millimetre) shall be used for water proofing treatment on terrace/depressed portion membreances are made from high grade bitumen and polymer APP/SBS modified bitumen is thin coated to non -wovan polyster reinforcement to give high care and puncher resistance. The application shall be done as per Architectural drawing , design and specification including carriage of material within all leads , lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Green marble work table rubbed and polished having semi/ round nosing in work top laid over 20mm(Twenty milimetre) thick base in C.M. 1:3 (One cement :3 sand) including jointed with cement mortar 1:2 (one cement : two sand) including carriage of material within all leads , lifts of materials and other incidentals as per approved drawing design and as directed by the Engineer in charge. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing ready made almirah of Godrej having size 1.0m x 2.0 m ( one metre into two metre) of M.S. sheet not less than 18 (eighteen) guage and approved colour /shade complete in all respect including carriage of material within all leads and lifts of materials and other incidentials as per directed by the Engineer in charge.The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash down water closet including jointing the trap with soil pipe in cement mortar 1:1 (one cement : one sand) (Indian type WC Big size Orissa pan No. 20004 of Hindware/ Cera / Jaguar of . 580 mm x 400 mm (five hundred eighty millimetre into four hundred millimetre) size in star white/ snow white shade including carriage of material within all leads , lifts and other incidentials as per directed by the Engineer in charge.The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash down water closet (European type W.C. pan seat No. 20041) of CERA/Hindware /Jaguar of star white /snow white shade with integral ‘P’ or ‘S’ trap including jointing the trap with soil pipe with adhessive of approved brand (Seat and cover to be measured and paid for separately) as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads, lifts and other incidentals.The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing plastic seat ( solid type) white plastic seat and cover for wash down water closet with C.P. (cromium plated ) brass hinges and rubber buffers as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash basin of Hindware/Cera/Jaguar No. 10001 in snow white, star white shade with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings 550x400 mm size ( five hundred fifty into four hundred millimetre ) including carriage of material within all leads , lifts and other incidentals and as per direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing stainless steel sink 460x560x229 mm ( four hundred sixty into five hundredsixty into two hundred twenty nine millimetre )No. 1022-XD of Prayag polymers/ Diamond/Unic with a pair of M.S. brackets complete including carriage of material within all leads, lifts and other incidentals and as per direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32 mm ( thirty two millimetre) dia PVC waste pipe for wash basin or sink including brass check nut including carriage of material within all leads , lifts, as per direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass waste for wash basin or sink 32 mm ( thirty two millimetre) dia , fitting complete including carriage of material within all leads and lifts, as per direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32 mm ( thirty two millimetre) dia M.I. union for wash basin or sink including carriage of material within all leads, lifts and as per direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC S trap for wash basin or sink 32 mm (thirty two millimetre) dia including carriage of material within all leads ,lifts, as per direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100 mm ( one hundred millimetre) nominal size C.P. grating square/round of approved quality and colour including carriage of material within all leads , lifts and as per direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600 x120 mm ( six hundred into one hundred twenty millimetre) glass shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP brass screws within all leads, lifts and as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600 x120 mm ( six hundred into one hundred twenty millimetre) C.P. brass towel rail of Jal/ Jaguar/ESS Ess complete with C.P. brass brackets fixed to wooden plugs with C.P brass screws with fitting complete including carriage of material within all leads , lifts and as per direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing toilet paper holder C.P. brass including fitting complete including carriage of material within all leads , lifts and as per direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of material within all leads and lifts as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass bib cock of Jal/Jaguar/ESS ESS of approved quality and coloured standred design size 15 mm (fifteen millimetre)within all leads , lifts and as per the direction of the Engineer-In-Charge and other incidentals.The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass pillar tap with capastan head of Jal /Jaguar/ ESS ESS cock of approved quality and coloured standred design size 15 mm(fifteen millimetre)within all leads and lifts as per the direction of the Engineer-In-Charge and other incidentals. The rate inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass stop cock of Jal/Jaguar/ESS ESS of approved quality and coloured standred design size 15 mm(fifteen millimetre) within all leads , lifts and as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass ball valve of Jal/ Jaguar/ ESS ESS of approved quality and coloured standred design size 15 mm (fifteen millimetre) within all leads and lifts as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass ball valve of Jal/ Jaguar/ ESS ESs of approved quality and coloured standred design size 20mm (twenty millimetre) within all leads , lifts and as per the direction of the Engineer-In-Charge and other incidentals.The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing plytheline - Aluminium polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamps at one metre spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) pipe exposed on wall internal work exposed on wall 2025 (25mm O.D. pipe) within all leads , lifts and as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing plytheline - Aluminium polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamps at one metre spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) pipe exposed on wall internal work exposed on wall 1620 (20 mm O.D. pipe) within all leads, lifts and as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etc. including carriage of materials with in all leads, lifts and other incidentals. Equal Tee 1620

Providing and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etc. including carriage of materials with in all leads, lifts and other incidentals. Equal Tee 2025.

Providing and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etc. including carriage of materials with in all leads, lifts and other incidentals. Reducing tee 1620.

Providing and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etc. including carriage of material with in all leads, lifts and other incidentals. Reducing Tee 2025.

Providing and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etc. including carriage of material with in all leads, lifts and other incidentals. Female branch Tee 1620

Providing and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etc. including carriage of material with in all leads, lifts and other incidentals. Female branch Tee 2025.

Providing and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etc. including carriage of material with in all leads, lifts and other incidentals. Female elbow 1620x15 mm thread

FProviding and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etc. including carriage of material with in all leads, lifts and other incidentals. Female elbow 2025x25 mm thread

Providing and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etc. including carriage of material with in all leads, lifts and other incidentals. Male thread connectors 1620x15mm thread.

Providing and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etc. including carriage of materials with in all leads, lifts and other incidentals. Male thread connectors 2025x25 mm thread.

FProviding and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etc. including carriage of materials with in all leads, lifts and other incidentals. Female thread connectors 1620x-15 mm thread.

Providing and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etc. including carriage of materials with in all leads, lifts and other incidentals. Female thread connectors 2025x25 mm thread.

CProviding and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etc. including carriage of materials with in all leads, lifts and other incidentals. Coupler 1620

Providing and fixing composite end seal compression fitting as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fitting complete including cutting and making good the walls etc. including carriage of materials with in all leads, lifts and other incidentals. Coupler 2025.

Providing and fixing 1000 ( one thousand ) litres capacity PVC water storage tank of of Sintex/Supreme Finolex(Triple Layer) ISI : 12701 marked,G.I. inlet and outlet connection and 15mmdia brass ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level within all leads and lifts as per the direction of the Engineer-In-Charge and other incidentals.The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 2000 (two thousand) litres capacity PVC water storage tank of Sintex/Supreme/Finolex of ISI : 12701 marked,G.I. inlet and outlet connection and 15mmdia brass ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC floor trap ISI marked of Supreme / Finolex/Prince of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetera cpmplete 110x90 mm ( one hundred ten into ninety millimetre) within all leads and lifts as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes of Supreme/ Finolex/Prince ISI marked including fixing with approved adhesive etcetera complete within all leads and lifts as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government. 150 mm ( one hundred fifty millimetre)

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes of Supreme/Finolex/Prince ISI marked including fixing with approved adhesive etceters complete within all leads and lifts as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government. 110 mm dia

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes of Supreme/Finolex/Prince ISI marked including fixing with approved adhesive etcetera complete within all leads and lifts as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government. 75 mm dia

Providing and fixing single equal branch plain of Supreme/Finolex/Prince ISI marked including fixing with approved adhesive etcetera complete within all leads and lifts as per the direction of the Engineer-In-Charge and other incidentals.The rate inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government. 150 mm dia.

Providing and fixing single equal branch plain of Supreme/Finolex/prince ISI marked including fixing with approved adhesive etcetera complete within all leads and lifts as per the direction of the Engineer-In-Charge and other incidentals.The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government. 110 mm dia.

Providing and fixing single equal branch plain of supreme /Finolex/Prince ISI marked including fixing with approved adhesive etcetera complete within all leads and lifts as per the direcion of the Engineer-In-Charge and other incidentals.The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government. 75 mm dia

Providing and fixing PVC door bend with oval access door insertion rubber washer 3mm (three millimetre) thick bolts and nuts ISI marked including fixing with approved adhesive etcetera complete 150mm dia.with approved adhesive etcetera complete within all leads and lifts as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC door bend with oval access door insertion rubber washer 3mm (three millimetre) thick bolts and nuts ISI marked including fixing with approved adhesive etcetera complete diametre 110mm with approved adhesive etcetera complete within all leads and lifts as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government

Providing and fixing PVC door bend with oval access door insertion rubber washer 3mm (three millimetre) thick bolts and nuts ISI marked of Supreme/Finolex/ Prince including fixing with approved adhesive etcetera complete diametre within all leads and lifts as per the direcion of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government. 75 mm dia

Providing and fixing PVC collars ISI marked of Supreme/Finolex/Prince including fixing with approved adhesive etcetera complete, with all leads , lifts and as per the direction of the Engineer-In-Charge and other incidentals.The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government 150 mm dia

Providing and fixing PVC collars of Supreme/Finolex/Prince of ISI marked including fixing with approved adhesive etcetera complete within all leads , lifts and as per the direction of the Engineer-In-Charge and other incidentals. The rate inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government. 110mm (one hundred ten millimetre) diametre

Providing and fixing PVC collars of Supreme /Finolex/Prime ISI marked including fixing with approved adhesive etcetera complete within all leads and lifts as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government. 75 mm dia

Providing and fixing PVC plain bends of Supreme/Finolex/Prince ISI marked including fixing with approved adhesive etcetra complete within all leads and lifts as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government 150mm dia.

Providing and fixing PVC plain bends of Supreme/Finolex/Prince of ISI marked including fixing with approved adhesive etcetra complete within all leads and lifts as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government. 110mm dia.

Providing and fixing PVC plain bends supreme/Finolex/Prince of ISI marked including fixing with approved adhesive etc. complete.with all leads and lifts as per the direction of the Engineer-In-Charge and other incidentals. The rate inclusive of octroi, royality, Malkana toll tax, sale tax, GST and any other taxes imposed by the Government 75 mm dia

Providing and fixing PVC P or S trap for water closet ISI marked including jointing the trap with pan and PVC pipe with approved adhesive etcetera complete within all leads and lifts as per the direction of the Engineer-in-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government. 110mm dia

Providing and fixing PVC Coloured /white high density polyethylene/poly propylene 10 liters capacity (Dual flush) European standard control low level flushing cistern of Hindustan/Cera/Jaguar with fitting including pair of brackets , lead valve, siphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) within all leads , lifts and as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. jet spray of Cera/ Jal/ Jaguar/ESS ESS of approved colour with one metre tube with in all leads , lifts and as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government

Providing and fixing white vitreous china flat back small or wall corner type lipped front urinal basin No. 60001 (Small size) with automatic flushing cistern of Hindware/Cera/ Jaguar with fittings R.S or C.I. Brackets standard size galvanised steel flush pipe and spreaders with brass unions and G.I. clamps complete, including painting of cistern and fittings, cutting and making good the walls, floors where required :one urinal basin with 5 (litres Capacity) within all leads and lifts as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government

Providing and fixing Divisional plate for urinal 600x300mm ( six hundred into three hundred millimetre) vitreous china of Hindware/Cera/Jaguar within all leads , lifts and as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with common brunt clay building bricks in cement mortar 1:5 (one cement: five sand) C.I. Cover with frame (light duty) 355mm X 610mm internal dimensions total weight of cover with frame to be not less than 38 kg (weight of cover 23kg. and weight of frame 15kg) RCC top slab with 1:2:4 mix (one cement : two sand : four graded stone aggregate 20mm nominal size) foundation concrete 1:5:10 (one cement : five sand : ten graded stone aggregate 40mm nominal size) inside plaster 15mm thick with cement mortar 1:3 (one cement : three sand) finished smooth with a floating coat of neat cement on wall and bed concrete etc. complete inside dimensions 455mm X 610mm X 450 mm deep single pipe line within all leads and lifts as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Constructing manhole with R.C.C. top slab in 1 : 2: 4 ( one cement : two sand : four graded stone aggregate 20mm (twenty millimetre) nominal size foundation concrete 1 : 4 : 8 ( one cement : four sand : eight graded stone aggregate 40mm nominal size inside plastering 15mm thick with cement mortar 1 :3 ( one cement : three sand) finished with a floating coat of neat cement and making channels in cement concrete 1 :2 :4 mix (one cement : two sand : four graded stone aggregate 20mm nominal size finished smooth complete including curing and testing inside size 800mmx800mm and 500mm deep including C.I. cover with frame (light duty single seal pattern-1) 455mmx610mm internal diamensions total weight of cover and frame to be not less than 38Kg. weight of cover 23Kg. and weight of frame 15Kg. with 300mm thick walls of squared rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (one cement : three sand) with in all leads and lifts as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x450mm beveled edge mirror of superior glass of Modiguard/saint gobian/Atul mounted on 6mm thick A.C. sheet or or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers.with in all leads and lifts as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government

Supplying and fixing cast iron cover with frame for man hole of 500mm internal diametre cover (medium duty with weight of cover with frame 38 kg ( thirty eight kilogram)and complete in all respect as per the direction of the Engineer-In-Charge and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government

Providing and fixing 200 mm (two hundred millimetre) wide cast iron rungs with chequered or ribbed non slip surface including fixing in manholes with 200mm X 200mmX10mm (two hundred millimetre into two hundred millimetre into ten millimetre) cement concrete 1:3:6 (1 Cement: 3 Sand: 6 graded stone aggregates 20mm (twenty millimetre) nominal size) as per the direcion of the Engineer-In-Charge and other incidentals.The rate is inclusive of octroi, royality, Malkana toll tax, sale tax, GST and any other taxes imposed by the Government

Providing and fixing to wall ceiling and floor galvanized mild tubes (medium grade ) tube fitting and clamps including making good the wall, ceiling and floor including carriage of material within all leads and lifts, as per direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government. 20 mm (twenty millimetre) nominal bore.

Providing and fixing Water pump one horse power (1 H.P.) of Kirloskar /Crompton including all its accessories to Lift rain water including carriage of materials within all leads , lifts , as per direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:3:6 (1 Cement : 3 Sand : 6 graded stone aggregate 40mm (forty millimetre) nominal size ) 10 cm (ten centimetre) thick bedding / haunching for PVC pipes of the following internal diameters, necessary form work and curing complete including carriage of materials within all leads and lifts as per direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government. 110 mm/ 150 mm ( one hundred ten millimetre/ one hundred fifty millimetre)

Providing and fixing 110 mm ( one hundred millimetre) PVC single equal branch with oval access door ISI marked insertion rubber washer 3 mm(Three millimetre) thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials with in all mleads an lifts. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing cast iron cover with frame 455mm x 610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 Kg and weight of frame 15 Kg) including carriage of material with in all leads and lifts. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

ANIL MAHAJAN

sahab singh thakur