Construction of LWSS Amb Town in Tehsil Amb Distt. Una (HP)(

Amount

Brick work using common burnt clay building bricks (Ist class) in super structure above plinth level upto floor two level in cement mortar 1:6 (1cement:6 sand) in all leads and lifts.

Providing wood work in frames of doors, windows and other frames wrought framed and fixed in position with second class deodar wood in all leads and lifts.

Providing and fixing wood paneled glazed or paneled and glazed shutters for doors, windows and clear story 40mm thick windows including bright finished black enameled iron with necessary screws with second class deodar wood 40mm thick in all leads and li

Providing and fixing wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85 G. with wire of dia 0.56 mm dor doors windows & clerestrery windows including bright finished black enameled iron hinges with necessary screws.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the same for insitu reinforced concrete and plain.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors upto 200mm kin thickness.

Beams,cantilevers,girders & lintels, sides & soffits of beams, haunching,cantilevers,bressumers 1.00 mts. In depth in all heights from floor.

COLUMNS,PILLARS,POSTS & STRUTS, IN SQUARE,RECTANGULAR, POLYGONAL IN PLAN.

Providing and laying cement concrete work 1:1.5:3(1cement:1.5sand: 3 graded stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:-

Columns, pillars posts and struts upto floor two level.

Suspended floors, roofs, landings and shelves and their supports, balconies, beams ,griders bressumers and cantilevers upto all floor level.

20mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar4 1:6(1cement:6sand) kin all leads and lifts.

6 mm cement plaster to ceiling in CM 1:3 (1Cement :3 Sand)

Providing Tor steel reinforcement for RCC work including bending,binding & placing in position complete upto floor two level.

Applying two coat of wood preservative on new wood based surface after and including preparing the surface by thoroughly cleaning dirt dust and other foreign matter.

Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil dirt grease and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink in all leads and lifts.

White washing with lime on undecorated walls surface (two coats) to give an even shade including thoroughly brooming the surface dirt dust mortar dirt and other foreign matter in all leads and lifts.

Finishing wall with water proofing cement paint of approved brand & manufacture & of required shade on undecorated wall surfaces (two coats) to give an even shade after thotoughly brushing the surface to remove all dirt & remains of loose powdered materials.

Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm dial meters bolts and nuts and wooden plug and embeding in cement mortar block 30x10x15cm (1:3:6(1cement:3sand:6 graded stone aggregate 20mm nominal size.

Providing and fixign follwing anodized aluminium fitting of anodized transparent and shade with necessary screw etc. complete

(a) Sliding door bolts 250x16mm.

(b-i) M.S. tower bolts (Barrel type) leads and lifts. 200x10mm.

Providing and fixing of MS round bars (16 mm) in windows and ventilators.

Terrazzo tile flooring with precast terrazzo tiles 20 mm thick with marble chips of specified size laid in floors,treads of steps and landing on a bed of 25 mm average thickness of cemenrt mortar 1 :6 ( 1 cement,6 sand ) jointed with neat cement slurry mixed with pigment to match the shade of tile where ever required including rubbing and polishing complete with tiles of following shades medium with in all leads and lifts complete in all respect.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable complete in all respect. "Group-C"

Wiring for 3pin 5/6 amp socket outlet point on swich board in (surface/recessed PVC wiring system) and 5/6 amp tumbler piono type switch earthing the 3 pin painting etc as required with in all leads & lifts complete.

Wiring for power plug with (2x4 Sq.mm) PVC insulated,heat resistant flame retardant(HRFR) and low smoke single core(flexible)copper conductor cable in surface/recessed PVC conduit along with 1 No. 4 Sq.mm. HRFRLS/PVC insulated sigle core copper conductor cable for earthing as required including carriage of material with in all leads & lifts complete.

Wiring for light plug with (2x1.5 Sq.mm) PVC insulated,heat resistant flame retardant(HRFR) and low smoke single core(flexible)copper conductor cable in surface/recessed PVC conduit along with 1 No. 1.5Sq.mm. HRFRLS/PVC insulated sigle core copper conductor cable for earthing as required including carriage of material with in all leads & lifts complete.

Wiring for circuit/sub-main with 2x10 Sq. mm size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required including carriage of material with in all leads & lifts complete.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 3 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, ainting etc. as required..

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required with in all leads & lifts complete.Double door-8 way

Supplying and fixing 63 amp rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required with in all leads & lifts complete Cat. A

Supplying and fixing 5 to 32 amp rating 240 volts "L" series MCB of single pole in the existing MCB DB complete with connection, testing and commissioning etc as required with in all leads & lifts complete.

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required with in all leads & lifts complete. Ceiling Fan 1200 mm sweep, Category-A

Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for pipe earth electrode complete as required.

Supplying and laying 6 SWG G.I. wire on surface / recess for loop earthing as required complete as per direction of the Engineer-in-charge.

Providing and fixing vitreous China water closet squatting pan (English type W.C. pan) size 580mm ( earth work bed concrete foot rest and trap to be measured and paid for separately) as per directions of Engineer-in- charge i/c entire carriage of material within all leads and lifts.

Uropian Pattern

Providing and fixing Sheet cover complete in all respect and to the entire satisfaction of Engineer in charge

Providing and fixing jet pipe complete in all respect and to the entire satisfaction of Engineer in charge.

Providing and fixing autometic flushing sistern 10 ltrs. Complete with fitting in all respect and to the entire satisfaction of Engineer in charge.

Providing and fixing angle valve complete in all respect and to the entire satisfaction of Engineer in charge.

Providing and fixing conciled valve complete in all respect and to the entire satisfaction of Engineer in charge.

Providing and fixing Hexa nipple complete in all respect and to the entire satisfaction of Engineer in charge.

Providing and fixing vitreous china wash basin with padestal of single hole for pillar tap with CI or MS bracketed painted white including cutting hole and making good the same for excluding the cost of fitting as per directions of Engineer-in- charge.

Providing and fixing connection pipe complete in all respect and to the entire satisfaction of Engineer in charge.

Providing and fixing cock brass angle valve 15mm without nut and pipe 906 excel make as per directions of Engineer-in- charge i/c entire carriage of material within all leads and lifts.

Providing and fixing long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer in charge.

b) Providing and fixing C.P.bib tap 15mm dia with capstan head (superior or heavy) as per directions of Engineer-in- charge i/c entire carriage of material within all leads and lifts.

Providing and fixing piller tap complete in all respect and to the entire satisfaction of Engineer in charge.

Providing and fixing Stainless steel jali complete in all respect and to the entire satisfaction of Engineer in charge.

Providing and fixing floor trap(3") complete in all respect and to the entire satisfaction of Engineer in charge.

Providing and fixing P/ trap (4'') complete in all respect and to the entire satisfaction of Engineer in charge.

Providing and fixing PVC Tee (3'') complete in all respect and to the entire satisfaction of Engineer in charge.

Providing and fixing PVC Bend (4'') complete in all respect and to the entire satisfaction of Engineer in charge.

Providing and fixing PVC Tee (4'') complete in all respect and to the entire satisfaction of Engineer in charge.

Providing and fixing PVC pipe (4'') complete in all respect and to the entire satisfaction of Engineer in charge.

Providing and fixing PVC pipe (3'') complete in all respect and to the entire satisfaction of Engineer in charge.

GI pipe in vertical facing 15 mm dia (1/2") complete in all respect and to the entire satisfaction of Engineer in charge.

fixing GI pipe in vertical facing 20 mm dia (3/4") complete in all respect and to the entire satisfaction of Engineer in charge.

Providing and fixing three layer plastic water Tanki of superior quality( sintex make) 1000 Ltrs. complete in all respect and to the entire satisfaction of Engineer in charge.

Providing and fixing 600x450 mm beveled edge mirror of superior class mounted on 6mm thick A.C sheet or ply wood sheet fix to wooden plug with C.P brass screws and washers as per directions of Engineer-in- charge i/c entire carriage of material within all leads and lifts.

Rajat Bassi (BID ID -458911)

Gagandeep (BID ID -459129)