PROVISION OF BALANCE FIRE FIGHTING SYSTEM AT 604 EME BN AT OLD CANTT UNDER GE (EAST) PRAYAGRAJ.

Amount

Excavation in trenches n.exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundation, forshafts, wells, cesspits, Pierholes etc n. exc 10 sqm on plan and n. exc 1.5 mtr in depth and getting out any type of soil complete all as specified and directed

Discription same all as per item No. 01 here in above but exc 1.5 mtr and n.exc 3.0 mtr deep any type of soil all as specified and directed.

M&L for surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified and directed

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling/mass concrete complete all as specified and directed

M&L for water retaining structure design mix M-25 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L design mix M-25 as in Beams, cantilevers, bressummers, lintels over1.5m span complete all as specified and directed.

M&L design mix M-25 as in Columns, pillars, piers, posts and struts complete all as specified and directed

Supply and fix 10000 litres capacity white colour five layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 40 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

M&L design mix M-25 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed..

M&L design mix M-25 as in Chullah hoods; stairways (except spiral staircases) including steps (square orspandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; RCC water tanks upto 1500 litres complete all as specified and directed

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs etc. also splays between floor and beam etc complete all as specified and directed

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

Formwork to staircases with sloping or stepped soffits including risers and stringers (excluding landing) complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed

M&L for Rendering 5mm thick on fair faces of brick work or concrete surfaces complete all as specified and directed

M&L for brick work with fly ash old size bricks staright or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on other than fair faces of brick work ,finishing the surface even and fair complete all as specified and directed

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed

Preparation of PCC/RCC roof surfaces and providing 10 mm thick modified plaster in CM 1:4 cement mixed with polymer in ratio of 1:10 (1 part of polymer and 10 parts of cement) applying priming coat of epoxy primer with resin and hardener with water dilution as per manufacturer instructions, applying two coats of solvent based polyurethane liquid membrane not less than 500 micron thick UV stable having SRI value greater that equal to 105 with consumption of 0.61 Kg/Sqm (each coat), complete all as specified and directed. Make : Asian paints /Thermax or equivalent make as approved.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area exc 1.5 Sqm but n exc 4.00 Sqm complete all as specified and directed

S&F 105mmx60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and directed

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/ frame to match complete all as specified and directed

S&F 150mm Aluminium handles, cast type, anodised complete all as specified and directed

S&F 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one pink primer complete all as specified and directed

M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for preparing plastered surfaces and appling two coat of cement base paint over one coat of primer complete all as specified.

M&L for preparing plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed

M & L for hardcore of broken stones or boulders n .exc 15 cm thick of gauge n.exc 63 mm, deposited, sprayed and levelled in layers n exc 15 cm thick watered and rammed to a true surfaces complete all as specified and directed

M&L for 1st quality non skid coloured ceramic ENDURA tiles n exc 0.11 Sqm 10 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over 75 mm thick PCC type D-2 using 1:4:8 graded stone aggregate as in sub base to floor finish and including including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Supply and Install Booster pumps for 440 V, 3 Phase, 50 Hz Confirming to IS- 12469 :1988 With CI Casing bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for 440 volts, 3 phase, 50 Hz 30m head, 450 LPM discharge incl foundation and rain shed as required complete all as specified and directed.

Supply and lay M S Pipes heavy grade seamless with all fittings incl cutting, welding work and painting of pipe with two coat of synthetic enamel paint over a coat of red oxide primer laid in floors or fixed to walls and ceilings etc of size 100 mm dia complete all as specified and directed.

Supply and lay M S Pipes heavy grade seamless with all fittings incl cutting, welding work and painting of pipe with two coat of synthetic enamel paint over a coat of red oxide primer laid in floors or fixed to walls and ceilings etc of size 32 mm dia complete all as specified and directed.

Supply and fix 100 mm bore hand operated butterfly valve of pressure not less than 15 Kg / Sqcm with complete set complete all as specified and directed.

Supply and fix gun metal gate valve of 32 mm dia with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

Supply & fix fire hydrant landing valve type A (single head outlet) of 63 mm dia conforming to IS 5290 complete all as specified and directed.

Supply and fix Hose cabinet outdoor type made of 18 gauge MS Sheet of suitable size to accommodate 02 nos hose reel 15 mtr long and one no branch nozzle with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard and to be fixed on wall with suitable wall bracket, fasterners etc complete all as specified and directed.

Supply and fix Gun metal fire brigade in let connection for connecting to external fire hydrant ring main consisting of two nos 63mm dia instantaneous type male coupling with built in check valves and 150mm dia, flanged outlet complete all as specified and directed.

Supply and fix 63 mm dia gun metal branch pipe with 12.5 mm nozzle conforming to IS 903 complete all as specified and directed.

Supply and fix Hose reel drum with hose reel of 30 meter length incl nozzle conforming to IS 5132 complete all as specified and directed.

Supply and fix Hose reel drum with hose reel of 20 mm dia and 30 meter length incl nozzle conforming to IS 5132 complete all as specified and directed.

Supply and fix yard hydrant Post / Stand Post 80mm Dia GI / MS both flanged type 1.5m Height complete all as specified and directed.

Supply and fix Pressure gauge 4"dial 0-21 kgs rating complete all as specified and directed.

Supply and fix Pressure switch Universal type complete all as specified and directed.

Supply and fix 63 mm dia 15 mm long hose conforning to IS 636 complete with male and female coupling conforming to IS 903 complete all as specified and directed.

M& L, for earthing with galvanised steel earth plate of size 600 x 600 x 6 mm thick burried directly in ground not less than 2.5 mtr below groud level with top edge of earth plate not less than 1.5 meters below ground level connected by GI wire 4 mm dia as earth lead by means of brass nuts and bolt, thimbles, check nuts, washers including concrete chamber of PCC 1:3:6 type C1 using 20 mm graded stone aggregate, with fair finish, inetrnal surface of concrete chamber shall be given internal dia 300mm X 300mm , 15 mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320 x 320 x 80 mm size (1:2:4) type B1 using 20 mm graded stone aggregate, adequate quantity of common salt, charcoal etc all, as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified incuding and provision of GI wire upto 7.5 mtr long with 40 mm dia light grade GI pipe protection and watering pipe of GI 20 mm bore, Medium grade, including all excavation and earthn work and connecting the earth strip to an earthing test point/panel including testing on completion complete alll as specified and directed by Engr-in-charge

Supply and lay pipe 50 mm dia galvanized, “Medium class”, including fittings complete all as specified and directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm dia complete all as specified and directed.

M&L for gun metal gate valve of 50 mm dia with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

M&L for gun metal gate valve of 25 mm dia with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

Supply,laying,jointing,testing and commissioning of LT underground cable 1100 volt grade, XLPE insulated and PVC/XLPE sheathed,heavy duty armoured with multi stranded aluminium conductor IS:7098 marked laid in trenches/duct/fixed to pole/walls/laid under road rossing / paths / drains / culvert or encased in GI pipe of size 25 sqmm 4 core complete all as specified and directed

S&F Cable with copper conductor PVC round sheathed (flexible) industrial cable single core of size 2.5 sqmm complete all as specified and directed.

S&F Cable with copper conductor PVC round sheathed (flexible) industrial cable single core of size 10 sqmm complete all as specified and directed.

Supply, install, testing and commissoning of monoblock pumpset of capacity 5 HP, 3 Phase 415V head range 15-30 mtr, discharge range 250-860 LPM incl making connection at suction and delivery line, making all electrical connections, pump foundation and rain shed as required complete all as specified and directed.

M&L for point wiring light/fan/bell point with PVC insulated FRLS unsheathed single core cable of multistranded copper conductor of size 1.5 sqmm as phase & neutral drawn in and including PVC conduit(HMS), duly concealed to wall/floor or above false ceiling of suitable size with all fitting and accessories laid on wall/ceiling alongwith 1.5 sqmm stranded PVC insulated unsheathed copper conductor(Green in color) as earth wire and connected to common earth dolly for the following incl making good to surface with CM(1:4) plaster and paint to match the surface complete incl provn of CI/pressed steel terminal switch box and white bakelite plastic laminated top sheet cover and fixed with brass screws cup washer for fixing switches/socket/regulators etc complete all as specified and directed for the following: - (a) one light/fan point

(b) same as item no 66 but one light point controlled by two 2 - way switches with cables 1.5 sq. mm size complete all as specified and directed

S&F Switch Piano Flush button single pole one way 5 Amp complete all as specified and directed

S&F Switch Piano Flush button single pole two way 5 Amp complete all as specified and directed

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

M&L ceiling rose 3 terminal / PVC/ polycarbonate, isolated body complete all as specified and directed

S&F LED exit signage board with battary backup in case of power cut complete all as specified.

Supply and fix RCBO SPN 40A 240V AC (Residual current circuit breaker with overload and short circuit protection) complete all as specified.

SUNSHINE BUILERS