REPAIR/REPLACEMENT TO WOODEN DOORS AND WINDOWS, WIRE MESH, ALUMINIUM JOINERIES, FALSE CEILING AND MISC B/R WORKS FOR INSIDE FORT WILLIAM UNDER GE (FW) KOLKATA

Amount

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area not exceeding 1.5 sqm each and removing from the site complete all as specified and directed.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm and not exceeding 4 sqm each and removing from the site complete all as specified and directed.

Taking down shutters of any description area not exceeding 1.00 sqm each and removing from the site complete all as specified and directed.

Taking down shutters of any description area exceeding 1.00 sqm and not exceeding 2.00 Sqm each and removing from the site complete all as specified and directed.

Taking down shutters of any description area exceeding 2.00 Sqm each and removing from the site complete all as specified and directed.

Taking down shutter only and re-fixing in same opening after planing, chiselling the shutters of any description n exc 1 sq. m each complete all as specified and directed.

Taking down shutter only and re-fixing in same opening after planing, chiselling the shutters of any description exc 1 sq. m but n exc 2 sq. m each complete all as specified and directed.

Taking down shutter only and re-fixing in same opening after planing, chiselling the shutters of any description exc 2 sq. m each complete all as specified and directed.

Material and labour for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including additional rebate for second shutter complete all as specified and directed.

Supply and fixing 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fixing 2nd class hard wood factory made 35mm thick plain, framed, panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm verneerd particle board with commercial veneering on both faces the size of rail and stile as per IS: 1003 (Part 1) Kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing 2nd class hard wood 35mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed.

Supply and fixing 2nd Class Hardwood 30mm thick factory made Glazed and Skeleton Shutters, open rebated and prepare to receive Glass, Gauge, etc. divided into Squares with Plain Chamfered or Rounded, mitred Sash Bars of any Numbers, Edges of Framing plain chamfered or rounded fitted with cut and mitred Beads for securing Glass, etc sizes of members of Shutter as specified in MES Schedule Part-I Section 8, Clause No. 8.24(b) and fitted to Wooden Chowkat, complete all as specified and as directed.

Supply and fixing 2nd class hard wood 30 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed.

M&L for factory Made Solid PVC Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Supply and fixing Factory made solid PVC door frame (chowkhat) of size 50mm X 47mm, made out of 5mm plain colour wood grain PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, Supply and fixing in opening as per specification & drg as per manufacturer instrutions complete all as specified and as directed.

Supply and fixing Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

Supply and fixing mild steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete all as specified and as directed.

Supply and fixing mild steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified and as directed.

Supply and fixing mild steel guard bars for steel window complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Supply and fixing anodised aluminium doors frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Supply and fixing Anodised aluminium door/Window shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters, aluminium section weighing 1.50 Kg/metre, side hung type, fixed at bottom with standard door spring, pintail etc including necessary jointing cleats, glazing clips, rubber packing, handle 2 Nos in each door, hinges, 02 Nos aluminium tower bolt 200 mm long and 01 No Mortise lock vertical type size 100 mm 4 levers of brass in each door, anodised aluminium snap beading screws etc, bottom panel of door fitted with 9 mm thick BSD prelaminated particle board, of aproved shade and 5.5 mm thick tinted glass ordinary quality in top panel as per manufactures instruction complete all as specified and directed. (NOTE: Quoted rate shall deemed to be inclusive of BSD pre-laminated particle board and 5.5 mm thick tinted glass)

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium sliding window with shutter styles 40 mm X 20 mm sheet thickness 1.5 mm with two shutters of glass and one shutter of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, window frame of size 100mm X 44mm X 1.5 mm thick section with our without rebate including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable peg stays, hinges and handles- 02Nos etc with 5.5 mm thick tinted/frosted glass ordinary quality as per manufacture's instruction complete all as specified and directed. (NOTE: Quoted rate shall be inclusive of stainless steel wire cloth and 5.5 mm thick tinted glass)

S&F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised decorative grills of size 75mm x 75mm having section width 6mm and 3mm thickness for aluminium windows, fixed on aluminium section weighing not less than 0.55 Kg/metre including all necessary jointing cleats, fixing clips complete all as specified and as directed.

Taking down aluminium door shutter, partition, aluminium sliding window and refixing the same with required cutting, re-adjusting and resizing of glass panes as per sitye condition complete all as specified and directed.

S&F in repair fabricated aluminium partitions using aluminium anodised sections of size and type as directed by Engineer-in-Charge including joining cleats, snap beading etc complete all as specified and directed.

S&F rubber gasket of aluminium door, window and partition wall for fixing glass panes or prelaminated particle board etc. complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, steel window or stone concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

Dismantling unframed timber scantling under 40 sqcm in section, in any position complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling structural steel work of any description including doors, gates, railing etc but excluding framed trusses complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge or any thickness in roof covering including stacking serviceable materials of re-use and removing unserviceable materials complete all as specified and directed.

Supply and fixing rubber gasket of 50 x 6mm as approved by accepting officer for fixing to door shutter in repair complete all as specified and as directed by engineer in charge.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with statinless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specified incl taking down old floor spring complete all as specified and directed.

-ditto- but incl taking down of existing floor spring

Supply and fixing in repairs aluminium (extruded section body) hydraulically door closer universal type designation No 1 universal type, suitable for door shutters up to 700mm in width and of weight not more than 35 kg complete all as specified and directed.

Supply and fixing in repairs aluminium (extruded section body) hydraulically door closer universal type designation No 2 universal type, suitable for door shutters up to 701mm to 850 mm in width and of weight not more than 36 kg to 60 Kg complete all as specified and directed.

Supply and fixing Venetion blinds with sliding rail vertical type frame, fabric type, fixed in position as in repair complete all as specified and as directed.

Supply and fixing Brass bracket for curtain rod decorative type fixed as in repair complete all as specified and as directed.

Supply and fixing in repairs ALUMINIUM powder coated 25mm dia decorated curtain rod with fixing brackets all as directed by Engr-in-Charge.

Supply and fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and as directed.

Supply and fixing 4mm thick frosted glass for toilet ventilator complete all as specified and as directed.

Supply and fixing 4mm thick float sheet glass for steel window complete all as specified and as directed.

Supply and fixing 5.5mm thick plain ordinary sheet glass for Aluminium door/ window complete all as specified and as directed.

S&F in repair 12mm thick clear toughened sheet glass for aluminium window/partition wall, exc 0.5 SQM in each pane complete all as specifed and directed

S&F in repair 12mm thick clear toughened sheet glass for frame less door with all necessary fitting & fixture complete all as specifed and directed

Supply and fixing prelaminated particle board 12mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

Material and labour in repairs 2nd class hardwood scantling to replace old and decayed timber (including piecing, scarfing, etc, of old and new timbers if required) and incl taking down/removing defective portion without damaging the roof slabs including preparation of new or previously un treated surfaces and priming with pink primer and applying two coats of synthetic enamel paint complete all as specified and as directed.

S&F stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

-ditto- but including taking down of existing wire cloth

M&L mild steel bands and straps support or stays holdfast and similar articles conforming complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, treating ends of posts, back of chowkhats etc, with tar or coal tar black paint, area tarred exc 0.1 sqm but n. exc 0.5 sqm each complete all as specified and directed.

-ditto- but treating small articles such as holdfasts, ends of posts, back of chowkhats, etc, area n exc 0.1 sqm each

Supply & fixing 100 mm stainless steel butt hinges(medium weight) cold rolled complete all as specified and directed.

-ditto- but incl taking down of 100 mm stainless steel butt hinges

Supply & fixing 100 mm mild steel butt hinges (medium weight) cold rolled complete all as specified and directed.

M&L for small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each, with second class hardwood complete all as specified and directed.

Supply & fixing 50 mm mild steel butt hinges(medium weight) cold rolled complete all as specified and directed.

S&F aluminium handle, cast type anodised 150 mm size complete all as specified and directed.

S&F in repair aluminium handle, cast type anodised 150 mm size complete all as specified and directed.

Supply and fixing in repairs 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 150 mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 200 mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

-ditto- but including taking down of existing tower bolt of size 200 mm

S&F 250 mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

-ditto- but including taking down of existing sliding door bolt of size 250 mm

S&F 200mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Supply and fixing 300mm long brass ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and as directed.

Materials and labour for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cills, copings, kneelers, apex stones, bed plates etc complete all as specified and as directed.

Supply and fixing in repairs 150mm extruded brass handles, cast type, polished bright complete all as specified and as directed.

Supply and fixing in repairs 200 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified and as directed.

Supply and fixing in repairs 300 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified and as directed.

Supply and fixing in repairs 250 mm long brass , sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fiing bolt with rolled or drawn brass bolts complete all as specified and as directed.

Supply and fixing as in repair for steel handle for mild steel window/ ventilator complete all as specified and as directed.

Supply and fixing Mortice lock vertical type (chrome) 100mm, 6 levers as in repair complete all as specified and as directed. (Make : Godrej Model No- 8194 or equivalent model in other makes specified in tender)

Supply and fixing Mortise lock (200 mm Ultra Mortice lock with Universal brass (2H) handle set) as in repair complete all as specified and as directed. Make : Godrej Model No- 7660 or equivalent model in other makes specified in tender)

S&F steel dead lock, 6 levers as in repair complete all as specified and directed.

S&F steel CY dead lock, 6 levers as in repair complete all as specified and directed.

Supply and fixing in repair Floor door stopper of brass body and tongue, polished with rubber cap, fixed to door shutter with screws complete all as specified and as directed.

Supply and fixing in repairs 50mm brass, 4 levers locks, cup board, grade I complete all as specified and as directed.

Supply and fixing 25 micron sun control film on glass reflective type, best quality, sticked to glass panes as per instructions of manufacturers, complete all as specified and as directed.

M&L for preparation of new untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour in repairs 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws timber / aluminium frame work/partition complete all as specified and as directed.

Material and labour 0.9 mm thick decorative laminate type-1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction over ply wood/block board complete all as specified and as directed.

Supply and fixing in repairs 12mm thick plywood, grade BWR, type BB, fixed to existing wooden surfaces with nails. complete all as specified and as directed.

Supply and fixing in repairs 6mm thick plywood, grade BWR, type BB, fixed to existing wooden surfaces with nails complete all as specified and as directed.

Material and labour 9 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws timber / aluminium frame work/partition complete all as specified and as directed.

M&L for Preparing wood or wood based surface of any description, not exceeding 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamelled paint over a coat of pink primer complete all as specified and directed.

S&F 2nd class hard wood plain fillets, square or rectangular or triangular in section, clean sawn, cross sectional area not exc 3 Sq cm, secured with nails complete all as specified and directed.

-ditto but fillets of cross sectional area not exc 3 Sq cm with surfaces wrought

S&F 2nd class hard wood plain fillets, square or rectangular or triangular in section, wrought, cross sectional area exc 3 Sq cm but n exc 6 Sq cm, secured with nails complete all as specified and directed.

-ditto but fillets of cross sectional area exc 3 sqcm but not exc 6 Sq cm with surfaces wrought

M&L for Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/SQM on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.

All as per Item No. 97 above but 0.50 mm thick coloured plain galvalume sheet as in ridge/valley gutter of roof.

M & L for cutting Grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 or cement concrete 1:2:4 type-B1 as required complete all as specified and directed.

S&F in repair fibre glass reinforcement translucent corrugated sheeting of 2mm thick with two corrugation side lap fixed with fixed with L type or J type or cranked hook bolts in roofs, walls etc complete all as specified and directed.

Supply and fixing mild steel wind ties for roof including securing bolts complete all as specified. (NOTE: Measurement shall be taken for the ms flat only. Quoted rate is deemed to include for the cost of securing bolts etc)

M&L for applying two coats of synthetic enamel paint over a coat of Red oxide, zinc chrome primer to new steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of synthetic enamel paint over a coat of Red oxide, zinc chrome primer to new steel surfaces of any description not exc 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer-in-Charge.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of Creosote oil complete all as specified and directed.

Dismantling of wall board as in lining, panelling etc, of any gauge or any thickness including cover fillets complete all as specified and directed.

Supply and Fixing PVC solid wall lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per manufacturer’s specification and instruction and as directed by the Engineer-in-Charge.

Supply and Fixing 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing.

Supply and fixing PVC decorative beading of 5mm thick moulded/designed for PVC wall panneling inclusive of fixing complete all as specified and directed.

M&L False ceiling with 'E' board "Classic", reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium snap grid to support the boards/files with aluminium anodised main 'T' section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides, fixed to ceiling with hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long and applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces including dismantling of existing ceiling complete all as specified and as directed. (NOTE: Quoted rate shall be deemed to be inclusive of the cost of ceiling board)

S&F in repairs False Ceiling 'E' board "classic" reinforced, designer series, board with HPSC (High pressure Steam Curing) of size 600 mm x 600mm x 4mm thick fixed on old aluminium powder coated snap grid to support the boards/files and applying two coat of oil bound distemper complete all as specified and directed by Engineer-in-Charge. (Note : Existing ceiling boards from ceiling as required and as directed by Engineer-in-charge shall be replaced)

S&F in repairs 12 MM thick perforated particle board/ tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber framework or with staples on snap grid as in sloping, flat or sloping complete all as specified and directed. (Note : Existing ceiling boards from ceiling as required and as directed by Engineer-in-charge shall be replaced)

-ditto- but 12 mm thick perforated particloe board/tiles fixed on walls

M&L for brick work using old size sub class 'B' fly-ash bricks straight or curved on plan exc 6 metre mean radius, built in cement mortar 1:6 complete all as specified and directed.

Forming jambs etc to the distrubed portion, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete with cement mortar1:6 and applying two coats of distemper oil emulsion as per reqmt of site complete all as specified and as directed.

M&L 15mm thick cement plaster on brick or concrete walls in cement mortar 1:6 finished even and fair complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

S&F Galvanised, corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 grams per sqm, fixed with 'L' type or 'J' type hook bolts complete all as specified and directed.

S&F 0.63 mm thick plain galvanised mild steel of grade '0' with zinc coating of 120 gm / sqm as in valley gutters ridges hips drip and strength flushing fixed with nuts and bolts with washer of suitable size complete all as specified and directed.

M&L in repair 1.00 mm thick mild steel plain black sheet in wall cladding, steel gates and similar work cut to size, holes punched headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up mitred angle etc are required complete all or specified and directed.

M&L in repair framed work as in door or gates of angle or other section bracer etc complete drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks an hinges or steel hanging door fittings (exclusive of steel sheeting rail and guide) and hanging also fastening and fixing complete all or specified and directed.

M&L in repair expended metal cut to length bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanized steel staples fixed complete to wood or steel member weight exc 4 sqm complete all as specified and directed.

M&L in repair plain aluminum 0.56mm thick sheeting for fixing backside of wooden door/expansion joint of roof and wall complete all as specified and directed.

S&F in repairs powder coated aluminum door cill 30mm wide 1mtr long including dust/insect arrestor complete all as specified and directed.

M&L in repair floor door stopper of aluminum alloy body and tongue anodize with rubber washer at bottom fixed with screw to body and fixed to door shutter overall length of cover plate shall be 150mm complete all as specified and directed.

M&L in repair for almirah polyvinyl chloride (PVC) door frame of size 18x50mm with a wall thickness of 18mm made out of extended 18mm PVC sheet and jointed with suitable cement solvent adhesive screw. The section are to be cut with size 18mmx50mm at the height according to the site. The door frame shall be fixed to the wall using 75mm long MS screw through the frame by using PVC fasteners. A minimum 3 Nos screw to be provided for each vertical membrane minimum 2 Nos for horizontal member etc. Complete all as direction by Engr-in-Charge.

M&L in repair 18mm thick solid PVC door shutter made out of 18mm celuka printed and PVC coated sheet which is cut according to the size of the almira shutter, kitchen cabinet drawer etc. Providing and groove to be made on the one edge so that overlapping could be done for double leaf for door shutter the fixing is to be done by the 15mm MS powder coated screw to be frame with the 75mm long aluminum hinges (2 Nos), 125mm long aluminum handle (1nos for each shutter and 75mm long aluminum hasp staple fixed with screw for door shutter complete all as per direction of Engr-in-Charge.

S&F in repair collapsible steel gate, top hung consisting of channel picket pivoted flat bars. Top and bottom runners, MS handle etc as specified, erected in position & securing runners with holdfast and bracket complete all as specified and directed.

M&L for repair to steel window/door/gate including necessary welding, riveting. Easing, drilling. Taking down, replacement of unserviceable hinging device, handles, making them in serviceable condition and re-fixing in same opening complete all as specified and directed.

IDEAL TRADERS

UNIVERSAL TRADING CENTRE

MAZUMDER ENTERPRISE

dutta and dutta

ARJUN DAS VALECHA

DEB AND COMPANY

S.S.ENTERPRISE