REPAIRS TO JOINERY, BRICK / STONE WORK OUTDOOR TILING, FLOOR PAINTING AND MISC B/R WORKS IN CERTAIN BLDGS OF MD ACCN AT UDAIPUR MIL STN UNDER AGE (I) UDAIPUR

Amount

Taking down chowkats or frames area not exceeding 1.50 Sqm (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1, complete all as specified and as directed. (Note – The quoted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid).

All as per item No. 1.00 here-in-above but chowkats or frames area exceeding 1.50 Sqm and not exceeding 4.00 Sqm

Taking down shutters of any description not exceeding 1.00 Sqm each, from chowkhat complete all as specified.

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each, from chowkhat complete all as specified.

Supply and fixing for mild steel framed work as in door chowkats/gate or cooler stand made of angle or angle iron work by drilling/cutting the stone masonry wall and fixing up to 1st floor walls, other section of grade Fe-290-Gde E-165 with gusset plate rails, braces etc welded/drilled to fixing of steel sheeting or other covering doors etc. to be prepared for sliding or hanging with and including either hooks and hinges or steel hanging door fittings (exclusive steel sheeting or other covering, running rails & guides), complete all as specified and as directed.

Material & labour for PCC 1:2:4 type B-1 ( using 20mm graded mechanically crushed stone aggregate) as in bed blocks, copings, apex stones, kerb stone, embedding to cooler stands in wall, embedding hold fasts etc complete all as specified and directed.

Supply and fixing, made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 65 mm x 125 mm (moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 750 Kg/cum & an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed,. Material test certificate and authentication should be compoulsory provided by the manufacturing company, complete all as specified and as directed.

S&F IInd class hard wood 35mm thick, Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and as directed.

Supply and fixing IInd class (hollock) hard wood factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over & including a coat of pink primer complete all as specified and as directed .

All as per item No. 7.00 here-in-above, but of frame size 45 mm X 70 mm

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N / m2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fie retardant WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, , complete all as specified and as directed. Note : Stainless steel butt hinges and necessary SS screws shall be measured & paid separately.

Supply & fixed 200 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply & fixed 150 mm long Extruded aluminium alloy handles, fabricated type anodised complete all as specified.

Supply & fixed 100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 100 mm long stainless steel butt hinges with galvanised MS hinge pin etc., complete all as specified and as directed.

S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified.

S&F double legged door stopper of overall length of cover plate 150 mm of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors and rubber , complete all as specified and as directed.

Supply & Fixed in repairs aluminium Hat and coat hooks, solid body, 175mm to 250 mm, complete all as specified and as directed.

Supply & fixed in repairs MS helical door spring 150 mm long fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats , complete all as specified and as directed.

Supply & fixed steel windows box type ERW hollow 'P' section comprising double frame including gauged and glazed skelton shutter 30mm thick jointed internally with flat iron 25x3mm complete including hinges handle tower bolts, stops lugs,grill etc all as shown in drawing CEJZ TD -20 sheet 1/3 to 3/3 as applicable complete Note :- For the purpose of measurement & payment double shutter with frame and grill shall be considered as one unit. (ii) Glazing,wire mesh & painting shall be measured & paid separately.

Hacking out old broken glass [any thickness, size, quality or description] from wooden/metal frames including punching or drilling out old glazing pins / spring clips complete all as specified and as directed.

Supply and fixing for 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square not excc 0.5 Sqm in each pane complete all as specified and as directed.

Supply and fixing 2nd class hard wood small fittings, such as brackets of any type latch and hinge blocks, shaped door and window stops and the like including all necessary labours ,articles not exc 200 cu.cm each, complete all as specified and as directed.

Supply and fixing wire netting of stainless steel wire1.4mm dia (size of mesh 12mm) fixed with tinned tacks of stainless steel wire staples or fixing with beads to wooden joinery when fixed in panels of joinery, complete all as specified and as directed.

Supply and fixing in repairs wire netting of stainless steel wire1.4mm dia (size of mesh 12mm) fixed with tinned tacks of stainless steel wire staples or fixing with beads to wooden joinery when fixed in panels of joinery, complete all as specified and as directed.

S&F in repairs 18 mm thick prelaminated PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works, complete all as specified and as directed.

All as per item No. 27.00 here-in-above, but 18 mm thick Plain PVC celuka ply

All as per item No. 27.00 here-in-above, but 12 mm thick Plain PVC celuka ply

All as per item No. 27.00 here-in-above, but 5 mm thick Plain PVC celuka ply

S&F in repairs PVC coated basket for kitchen drawers of required size and including sliding channels 02 Nos to each basket for accommodating kitchen utensils of various size and shapes, complete all as specified and as directed.

S&F in repairs brass handle fabricated type polished of size 75 mm, complete all as specified and as directed.

Supply & fixing in repair self closing/auto Casement type hinges 90/180 degree fixed to Modular Kitchen cabinets in Offrs Md Accn, complete all as specified and as directed.

Supply & fixed powder coated (minimum thickness of powder coating 50 micron) aluminium ventilator fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clip,rubber packing, anodised aluminium snap beading, screw etc complete all as specified and directed.

Supply & fixed for anodised aluminium grill of (anodised transparent or dyed to required shade according to IS:1868 with minomum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised alumiinium standard section around the opening, complete all as specified and directed.

M&L for 4mm thick figured glass, ordinary quality and glazing rubber beading in square not exc. 0.5 sqm in each pane complete all as specified and directed.

M&L for 5.5mm thick plain sheet glass, ordinary quality and glazing rubber beading in square exc. 0.5 sqm in each pane complete all as specified and directed.

Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample complete all as specified and directed.

Supply & fixing in repair purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample complete all as specified and directed.

Supply & fixing in repair stainless steel decorative fincals (round type with mirror optic finish)trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample, complete all as specified and directed.

Supply & fixing in repair stainless steel decorative fincals wall to wall trade pattern suitable for decorative type curtain rods 22 to 25mm dia as per sample complete all as specified and directed.

Material & labour for fabrication of pressed steel cupboard shutter using 1mm thick MS plain sheet with frame 1.25mm thick bent to shape including two coat of synthetic enamel paint on internal surfaces over & including two coat of hammer tone finish primer on external surface alongwith locking arrangement mortice lock ,handle etc complete all as specified as per drg No CEJZ/TD/12/2008 sheet 1/3 to 3/3.

M&L preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15cm thickness ( below or above ground level) of any description and removing rubbish to out side MD land complete all as specified and as directed.

Material and Labour for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base/mass concrete and finished the top surface even and fair complete all as specified.

M&L for 300x300x20-25mm thick chequered cement concrete tiles rubberised moulded, with grey cement and pigment set, jointed and pointed in neat cement slurry, over & including 20 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for vitrified out door tiles 400x400x10-12 mm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement, over & including 20 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006, M-35 Grade, 60 mm thick, with grey cement and pigments, over and including sand cushioning of 50mm thick, complete all as specified and as directed.

M&L machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006, M-40 Grade, 80 mm thick , with grey cement and pigments, over and including sand cushioning of 50mm thick, complete all as specified and as directed.

M&L for preparation of old paver block/chequered tiles floors any pattern by brooming down or steel wire brushing for removing caked mud, trading oil and greasy spots, cleaning with water etc and applying two coats of glossy Indigo Floor coat emulsion paint premium series, complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of steel reinforcement as required to facilitate demolition, complete all as specified.

M&L for reinforced cement concrete 1:1.5:3 (nominal mix) Type B-1, (using 20mm graded aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed.

M&L for reinforced cement concrete 1:1.5:3 (nominal mix) Type B-1, (using 20mm graded aggregate) as in chajjas, complete all as specified and as directed.

M&L for formwork to sides and soffits of floor or roof beams,lintels, cantilevers etc. and similar work, comlete all as specified and as directed.

M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges, comlete all as specified and as directed.

S&F for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and as directed.

All as per item No. 56.00 here-in-above, but size of TMT bar is 6mm to 8mm dia, as in stirrups.

Demolition of brickwork or stone/boulder masanory,laid dry below or above ground level and removing material from site complete all as specified and directed.

M&L brickwork with fly ash bricks, straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L brick work with fly ash brick, straight or curved on plan any radius as in half brick thick walls built in CM 1:4 complete all as specified and as directed.

M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6, compelte all as specified and as directed.

All as per item No. 61.00 here-in-above, but except stones

Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed

M&L 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finished the surfaces even and smooth with out using extra cement complete all as specified and as directed.

All as per item No. 64.00 here-in-above, but as on stone masonary

M&L 15 mm thick rendering in cement mortar 1:4 mixed with water proofing compund, on fair faces of brick or concrete or stone masonry external wall surfaces and finishing the surface even and fair without using extra cement all as specified and as directed. Note : (i) WPC shall be measured and paid separately. (ii) Rendering work shall be carried upto 9 mtr height, Quoted rate is deemed to be inclusive of necessary T&P i.e. safety measure, protection device, scaffolding & other required etc.

M&L for Preparing new plastered or unplastered surfaces and applying with 1-1.50 mm thick wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper white or tinted over & including one coat of primer on walls complete all as specified and as directed.

M&L for Preparing new plastered or unplastered surfaces and applying with 1-1.50 mm thick wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of weather proof exterior emulsion paint over & including one coat of alkali resistant acrylic primer on walls, complete all as specified and as directed.

S&F 50mm bore LDPE (Low density Polyethylene Pipes) of pressure rating 6Kgf/Sqcm fixed to walls/ceilings or laid in floors, with all pipe fittings such as ends, elbows, unions, tees, reducing tees, adoptors, sockets, plugs, hose clips etc. and fixing to walls etc, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and cutting through walls, floors and disturbed surface making good or laying in trenches and also cutting, screwing and waste. including taking down of old u/s 40 mm bore GI tubing, complete all as specified and directed.

Supply only in repair 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed. Note:- Provision for fixing shall be under respective item No. 72.00 & 73.00.

S&F in repair vitreous china wash hand basin flat back white of size 550mmx400mm with 32 mm dia chromium plated waste coupling including flush pipe etc complete all as specified.

S&F in repair vitreous china squatting pan "orissa" pattern, size 580 x 440 mm white, with integral foot rest (Excluding flushing cistern and flush pipe) including connection to 'P' or 'S' trap and to flushing pipe, anti-syphonage pipe, including provision of cement concrete bedding 1:5:10 type E2 complete all as specified and as directed.

S&F in repair vitreous ware wash down water closet [Pedestal Pattern] Ist/premium quality, white [ETWC] (Excluding flushing cistern and flush pipe) including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap connecting to drain pipe and flushing pipe etc., complete all as specified and as directed.

S & F in repairs stainless steel kitchen sink with drainage board, made of stainless steel 1 mm thick, with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, over all size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

S & F in repairs stainless steel plate rack of size 900mm X 900mm X 200mm of approved pattern made out of stainless steel sheet 1.00 mm thick, with round 8mm dia rods complete all as specified and directed.

S & F in repairs CP brass, sink mixer with Swinging Casted Spout (Wall Mounted Model) for mixing hot & cold water with Connecting Legs & Wall Flanges, complete all as specified and as directed.

S & F in repair CP central hole basin mixer with regular spout with out popup waste system with 450mm long braided hose with connecting legs and wall flanges complete all as specified and as directed.

S & F in repair CP wall mixer with provision for overhead shower arrangement, 115 mm bend pipe on upper side, connecting legs and wall flanges, complete all as specified and as directed.

S&F in repair pillar tap, fancy type, chromium plated, cast copper alloy with capstan head, ISI marked, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks suitable for 15mm bore pipe or union, complete all as specified and as directed.

S&F in repair bib tap screwed down high pressure, cast copper alloy, fancy type, ISI marked, with crutch or butterfly handles screwed down, suitable for 15mm bore pipe or union, complete all as specified and as directed.

S & F in repairs, stop valves, 15 mm dia, cast copper alloy with capstan head, chromium plated, fancy type, screwed down high pressure with crutch or butterfly handle with long shank and cup [concealed type] for iron pipe etc., complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges, complete all as specified and as directed.

S&F in repair rotational moulded polythene water storage tanks of 1000 ltrs capacity, white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I with PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms including dismantling old u/s 500 ltrs capacity tank & remove to store or credit to contractor, complete all as specified and as directed.

Supply and fixing in replacement Gun metal globe or gate valve, suitable for 20mm bore pipe, with iron wheel head, screwed both ends for iron pipe, complete all specified and as directed.

Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed.

All as per item No. 86.00 here-in-above, but size of pipe is 20 mm bore.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 or brass fittings, 16mm outer dia on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor, complete all as specified and directed.

All as per item No. 88.00 here-in-above, but size of pipe is 20 mm bore.

S & F in repairs, stop valves, 15 mm dia, cast copper alloy with capstan head, chromium plated, fancy type, screwed down high pressure with crutch or butterfly handle for iron pipe etc., complete all as specified and as directed.

S&F in repair chromium plated, fancy type, angle cock, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for unions complete all as specified and as directed.

S&F in repairs, PVC connections 450mm long, 15mm size with brass fly and washers on both ends complete all as specified and as directed.

Supply & fixed in repairs stainless steel grating openable 100mm dia without hole including fixing with white cement solvent, complete all as specified.

S & F in repairs, brass chromium plated shower rose of size 125mm with 30 cm long extension body with or without swivel joints fixing to steel pipes complete all as specified and as directed.

Supply & fixed in repair glass shelf assembly consisting of made out of 5.5 mm thick glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S & F for CP brass Soap Dish Holder, complete all as specified and as directed.

Dismantling of 75/100 mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out complete all as specified and directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 100mm bore, in any length with or without ears, jointed with cement sand mortar, fixed to walls with and including MS clamps complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 75mm bore, in any length with or without ears, jointed with cement sand mortar, laid in trenches or in floors complete all as specified and as directed.

S & F cast iron bends [any radius], diminishing pieces or tapers [larger bore measured] suitable for 100mm bore pipes, for cast Iron soil / waste / vent pipes complete all as specified and as directed.

All as per item No. 100.00 here-in-above, but suitable for 75mm bore pipes

S & F cast iron branch pieces with ovall access door, single [equal or unequal] ordinary or inverted [spigot and socketed type] or with parallel branches suitable for 100mm bore pipes complete all as specified and as directed.

All as per item No. 102.00 here-in-above, but suitable for 75mm bore pipes

Material and labour in repairs 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type-B-1 (1:2:4) using 12.5mm brick aggregate all as specified and directed.

Material and labour in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement including jointing to waste pipe fixed in cement concrete type-B-1 (1:2:4) using 12.5mm brick aggregate all as specified and directed.

M/s Ajay kumar Garge

THE SHIVAM ENTERPRISES

M/s SUNIL ENTERPRISES

m/s sharma constructions