SPECIAL REPAIR TO COMPOUND WALL AT KENDRIYA VIDAYALAYA GANESHKHIND PUNE

Amount

Demolition of Brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of RCC of any description in any position not specifically provided for (Reinforcement cut as required to facilate demolition) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Dismanting of barded wire of any dia and guage complete all as specified and directed.

Supply and Fix MS angle iron in fencing posts & struts including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets ( for securing wire mesh etc) including all necessary, drilling, bolting or riveting etc and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

Material and Labour for plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in fixing of angle iron, coping over the wall etc including neccesary formwork complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of stan dard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) as in wire entanglements aprons, barriers, gates etc. including restraining resecuring and making good to staples complete all as specified and directed.

Material and labour for Razor concertina coil, 610 mm dia. ( 50 spirals per coil) weight apptox 8 Kg (+ or - 5%) expandable 6 metre to 8 metre, consisting of 2.6 mm dia. Heave galvanised high tensile spring steel wire as per IS- 4454, Barb ( Barb length 24 +or - 1 mm, pitch between two barbs 35 + or - 1 mm ) wade of 0.5 mm thick low carbon heave galvanised cold rolled steel sheet as per IS-513, heave duty steel clip as per IS- 2062 and Epoxy resin coating for anti- corrosion, complete all as specified and directed.

Excavation in trenches n exc 1.50metre wide and 1.50metre depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n. exc.10sqm on plan and getting out in any type of soil complete all as specified and directed.

Material and Labour for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in foundation filling & mass concrete complete all as specified and directed.

Material and Labour for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and directed.

Material and Labour for RCC M25, Design mix (using 20mm graded stone aggregate) as in foundation including rafts, footings, foundation, beams, plinth beams, etc complete all as specified and directed.

Material and Labour for formwork to sides of pillars, posts struts, piers, columns and stanchions, including fair finished surfaces of concrete, square rectangular for fair finished surfaces complete all as specified and directed.

Material and Labour for formwork to side and soffits of lintel/top beams for fair finished surfaces complete all as specified and directed.

Material and Labour for RCC M25, Design mix (using 20mm graded stone aggregate) as in lintel/ top beams complete all as specified and directed.

Material and Labour for RCC M25, Design mix (using 20mm graded stone aggregate) as in Columns, pillars piers, posts and struts etc complete all as specified and directed.

Material and Labour for TMT 10mm dia bars and over cut to length, bent to shape required including cranking, bending, hooking ends, and binding with mild steel wire not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Material and Labour for TMT 5mm dia bars and over upto and including 10mm dia bars in stirrups, spacers and binders to shape required including cranking, bending, hooking ends, and binding with mild steel wire not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Material and Labour for walling of random rubble, brought upto course, well bonded, bedded and solidly hearted, built in CM(1:6) complete all as specified and directed.

Material and Labour for walling of random rubble, brought upto course, well bonded, bedded and solidly heartted, builted in CM(1:6) but except stone including removing mortar and disposing of debris etc complete all as specified and directed.

Extra over stone walling on granite or trap stone for hammer dressing with maximum depression not exc 40mm from face from strainght edge to face stones and dressing of face beds and joints as specified of random rubble walling uncoursed or brought upto course complete all as specified and directed

Material and Labour for rendering 20mm thick in two coats of 15mm & 5mm respectively, on stone masonary surfaces of brickwork in cement mortar 1:4 finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and Labour for 15mm thick rendering on fair face of brick work or concrete surfaces in CM 1:4 finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and Labour for preperation of new surfaces and Finishing walls with Acrylic Smooth exterior paint of required shade : (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Material and Labour for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed.

Material and Labour for preparetion of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coat of synthetic enamel paint on a coat of red oxide primer complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

Removing excavated soil exc. 250 metre but n exc. 500 metre and depositing where directed from starting point complete all as specified and directed.

OM GANESH CONSTRUCTION

AMW Construction and developers

M/s DEVRATAN ENTERPRISES

Sunil Constructions

M/S SAMRUDHI CONSTRUCTION

M/S.J.V.Datar

M/S NILESH BUILDERS

sanjay m. suryawanshi