Repair and Renovation of Centralized facilities in the Department of Geography in connection with NAAC Accreditation of Jammu University

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of 1 mm (avg.) thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Distempering (one coat) with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including to achieve even shade and colour.applying additional coats wherever required

Painting with synthetic enamel paint of approved brand and manufacture (Make Asian/Nerolac) of required colour to give an even shade, one or more coats on old work.

Supply of following items including cost of nails, screws, fevicol etc. As required. Wire guage

----------------do---------------- Aluminum Sheet

----------------do---------------- Aluminium Hasp and Staple 125mm

---------------do------------------- Door Seal

----------------do------------------- 4mm Ply Commercial

Supply of Labours for different works Carpenter II Class

---------------do------------------ Mazdoor

Repairs to plaster of thickness 12mm to 20 mm in patches including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish outside the University Campus. With cement mortar 1:4 (1 cement : 4 sand). All work upto floor V level.

Renewing glass panes, with wooden fillets wherever necessary Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete: 250 x 10 mm

--------------do---------------- 150 x 10 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125 mm

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. Complete 300 x 16 mm

Providing and fixing ISI marked flush door shutters non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :30 mm thick including ISI marked anodised aluminium butt hinges with necessary screws.

Uprooting of Trees/Plants grown on walls/roofs by way of dismantling brick masonary/concrete, taking out of the roots and making good the same in original condition. (Cost of Brick Masonry and finishing to be paid separately). All work upto floor V level.

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White

P&F of stainless steel A ISI 304 (18/8) Kitchen Sink as per IS:13983 with C.I brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required. Size 610 x 460 mm bowl depth 200 mm

Providing and fixing PTMT Towel rail complete with end brackets fixed on wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. (Prayag Make)

M/S DALJEET SINGH

M/S MOHD ASHRAF SHAN