Repair to flooring joinery sunken floor internal water supply and certain other misc works at Armt Wing AVS SOTT HQ SOTT area under AGE B/R-I at GE(N) Ahmednagar

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor etc complete all as specified and directed by Engineer-in-Charge

Dismantling floor, hearth or wall tiling including cement morter bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete solid block masonary built in cement and sand mortar etc complete all as specified and directed by Engineer-in-Charge

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including ridge etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames exc 1.5 Sq m but nexc 4.00 sqm with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

All as per Item No. 7 (here-in-before) but n.exc 1.5 Sqm

Taking down shutter exceeding 1.00 sqm but not exc 2 Sqm etc complete all as specified and directed by Engineer-in-Charge

Taking down and opening the existing Steel rolling shutter, pull push type, not exc 12 sqm each in area as clear opening, including hood cover, cleaning the sides guides , suspended shaft, anti guide channels, straightening/rolling shaft and replacement of bolts & nuts after greasing all the moving parts of rolling shutter and refixing in the same opening to make it for smooth functioning etc complete all as specified and directed by Engineer-in-Charge

All as per item No 10 (here-in-before) but gear operated shutter area exc 12 Sqm but not exc 25 sqm each including adjustment of gear assembly.

Supply , fixing and errecteing in position in repairs steel rolling shutters with thickness of laths 1.25 mm , push pull or manual type with out ball bearing including top cover, bottom plate,anchoring rod, hasp and staple, mild steel handle including applying one shop coat of red oxide primer, erected in position etc complete all as specified and directed by Engineer-in-ChargeNote: Net area of opening shall be measured for purpose of payment.

Material and labour for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), laid , jointed and pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge

Material and labour for machine cut cudappah stone slab 20-25 mm thick, laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed with grey cement slurry and pointed in grey cement mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

Material and labour 17-18 mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round moulding the edge laid over and including screed bed 15mm thick in cement and sand mortar (1:4) jointing and pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish etc complete all as specified and directed by Engineer-in-Charge

Supply and fix rotational moulded polyethylene water storage tanks double layer ISI marked conforming to IS 12701-1996 (cylindrical vertical with closed top) and made out of virgin FDA approved polyethylene material of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 17 )here-in-before) but 1000 ltrs etc.

M&L machined pressed precast concrete interlocking paver block glossy with grey cement and pagment, any shpae and size confirming to IS 15658-2006 of 60mm thickness M-35 grade over a stone dust cushion of 30mm thick etc complete all as specified and directed by Engineer-in-Charge

Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories) etc complete all as specified and directed by Engineer-in-Charge

S &F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc complete all as specified and directed by Engineer-in-Charge

S &F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc complete all as specified and directed by Engineer-in-Charge

Taking up and down 15 mm bore GI tubing and connection including cleaning for re-fixing or removing to store etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No. 23 (here- in- before) but 20 mm bore etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No. 23 (here- in- before) but 25 mm or 32 mm bore etc complete all as specified and directed by Engineer-in-Charge.

S & F tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors 15 mm bore of pipe etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No. 26 (here- in- before) but 20 mm bore of pipe

All as per Sl item No. 26 (here -in- before) but 25 mm bore of pipe

S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s) etc complete all as specified and directed by Engineer-in-Charge

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs stainless steel grating, 110 mm dia etc complete all as specified and directed by Engineer-in-Charge

S&F PVC (SWR) floor trap, 75 mm dia with grating including jointing with solvent cement etc complete all as specified and directed by Engineer-in-Charge

Material and labour for soild block masonry built with plain cement concrete (1:5:8) solid blocks, type C5, using 40 mm graded stone aggregates built in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rendering, 15 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:6) surfaces finished even and smooth without using extra etc complete all as specified and directed by Engineer-in-Charge

M & L for non skid ceramic coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

M & L for glazed ceramic coloured tiles of size 350 X 250 mm X 7 mm/450x350x7mm thick on vertical surfaces as in dados laid over and including a backing coat of 10 mm thick in cement and sand mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

M&L jointfree Non skid ceramic coloured tiles 7 to 8 m thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 Sqm as in floor etc set of jointed in neat cement slurry & pointed in white or coloured cement to match the shade of tiles, laid over and including 15 cm screed bed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

All as per item No 38 (here-in-before) but as in skirting over and including 10 mm thick backing coat in cement and sand mortar (1:4)

M&L in repair pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws including dismantling corrugated steel sheeting, any gauge, thickness etc complete all as specified and directed by Engineer-in-Charge

M&L in repair pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof fixed with self tapping screws complete all as specified, colour and design as approved by GE including dismantling of plain steel sheeting, any gauge, thickness etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP aluminium hinges device complete connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-Charge. Make:-Petite series Cat part No C0287(S)/88(P) Incl seat cover Cat part No E8309 of Parryware or equivalent to makes in makes list in Appendix `C'

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren etc complete all as specified and directed by Engineer-in-Charge. Make :- Cat Part No C0117 Of Parryware or Cat Part No 20042 of Hindware or equivalent to makes in makes list in Appendix `C'

Supply and fix in repairs wash hand basin vitreous China, flat back of size 550 X 400 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap all as directed. Make : Cat Part No 10004 of Hindware or Cat Part No C0475 of Parryware.

M&L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion paint over a coat of chalk whitening primer on wall complete all as specified and directed

M & L for Complete removal of existing treatment on plastered surface and applying 2 mm thick wall care putty (birla) including crack filling and applying two coats of Oil bound distemper (OBD) etc complete all as directed specified and directed by Engineer-in-Charge

M&Lfor preparation of new plastered surfaces of wall and applying two coats of cement paint over a coat of primer on wall complete all as specified and directed

M&L for preparing old painted surfaces of wall and applying one coat of cement paint etc complete aall as specified and directed by Engineer-in-Charge

M&L for preparation of old plastered surfaces of wall and applying two coats of cement paint on walls etc complete all as specified and directed by Engineer-in-Charge

M&L for prepration of old plastered / decorated surfaces of walls and applying one coat of oil bound distemper on plastered / decorated wall surfaces etc complete all as specified and directed.by Engineer-in-Charge

M&L for preparation of old decorated surface of wall surfaces of any description & applying one coats of acrylic (antifungal) exterior grade paint on wall/roof etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old decorated surafces of walls etc and applying one coat of white wash etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 52 (here-in-before) but one coat of white wash on ceiling

M & L for preparation of old painted wooden surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge

All as per item No 54 (here-in-before) but on steel surfaces

Supply and fix pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge

Material and labour for filling in door frames with plain cement concrete, (1:2:4) type B0, using 12.5 mm graded stone aggregates etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 35 mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial plywood . The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and directed by Engineer-in-Charge

S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet etc complete all as specified and directed by Engineer-in-Charge

S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with salvent cemet for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site etc complete all as specified and directed by Engineer-in-Charge

Material and labour for second class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.and removing old beads etc complete all as specified and directed by Engineer-in-Charge

Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 300mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised barrel tower bolt of extruded section 200mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised handles of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge.

Material and labour forapplying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller etc complete all as specified and directed by Engineer-in-Charge

Material and labour for applying two coats of synthetic enamel paint over a coat of Red Oxide primer on new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller etc complete all as specified and directed by Engineer-in-Charge

Supply and fixed in repairs 32 mm dia PVC waste pipe(outlet pipe) plain fixed to waste coupling of WHB or Sink etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair bib tap, 15 mm bore CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule all as directed.Make:- (Cat part No MOR 1020 A(Orintal series) of MARC or equivalent in makes mentioned in list of makes in Appendix `C'

Supply and fixing in repairs stop valve cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore Make:- (Cat part No MOR 1320(Orintal series) of MARC or equivalent in makes mentioned in list of makes in Appendix `C'

Supply and fix 15 mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as directed.Make:- (Cat part No MOR 1010(Orintal series) of MARC or equivalent in makes mentioned in list of makes in Appendix `C'

Supply and fix in repairs, shower rose with shower arm from Make:- Cat part No MARC MSR1050 (Shower) and MOR 1260(Shower arm) from MARC or equivalent in makes mentioned in list of makes in Appendix `C'

Hacking out old broken glass (any thickness size,quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads n'exc 1.5 Sqm etc complete all as specified and directed by Engineer-in-Charge

Material and labour for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

Material and labour for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious grout and applying 10mm thick cement plaster in CM 1:4. Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished rainforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torach and sealing all joints etc and preparing the surface complete. and providing PCC 1:5:10 type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC 1:4:8 type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, non-skid glazed tiles as per existing pattern/size/tint with and incl WC viterous china squatting pan 580x440mm with integral footrests/pedastal pan incl seat cover, white, area of WC exc 1.50 Sqm but nexc 5.00 sqm etc after dismantling the existing sunken floor etc etc complete all as specified and directed by Engineer-in-ChargeMake : Super Thermolay MT of STP / TEXSA / FosRoc Note : Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

Supply and fix in repair health faucet (hand shower) with 8 mm dia 1 m long flexible tube wall mounted / hooked all as per Cat Part No 573 of Jaquare or equivalent in makes mentioned in list of makes in Appendix `C'

Supply and fix tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets etc complete all as specified and directed by Egineer-in-Charge. Make:- Cat part No UO911 of PLUMBER or equivalent in MARC, ESS-ESS

Supply and fixing in repair vitreous China bowl urinal flat back, size of 270X360X450 mm, white, with grating and union for discharge pipe excluding flushing cistern, flush pipe and waste pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement mortar 1:4 complete all as specified and as directed.Make :- Cat Part No C0501 Of Parryware or Cat Part No 60001 Of Hindware.

S&F in repairs for vitreous china urinals, bowl type (back or corner wall type,) complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisternswith brackets, flush pipes, inlet ,outlet etc complete all as specified and directed by Engineer-in-Charge

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples as fixed etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples as fixed etc complete all as specified and directed by Engineer-in-Charge

Supply and fix PVC valveless, syphonic action type, flushing cistern,low level, all accesories etc complete all as specified and directed by Engineer-in-Charge Make :- Sleek essence series Of Hindware or Cat part No E8303 Of Parryware .

M & L for for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

M & L for Plastering 10 mm in cement and sand mortar (1:3) using 100% course sand on roof mixed with & including WPC @ 3% by weight of cement and finished the surfaces even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M & L for providing water proofing treatment on roofs as per latest zonal specification , as per manufecturer's instructions and as specified after taking down/out as existing at site :- (a) M & L for Cleaning the newly plastered surfaces with wire brushes and applying a coat of bituminous primer @ 0.25 ltrs/sqmts and allow to dry. (b) M & L for Applying and laying torch APP polymer modified bituminous membrance 3 mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts with white gravel/mineral finished by thermofusion process.

M&L for mild steel tubular work as in posts, purlins rafter etc.using ERW or induction butt welded tubes etc fixed in repairs etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs aluminium extruded section door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc complete all as specified and directed by Engineer-in-Charge

Taking down aluminium doors shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixng the handles & mortice looks in existing postiion with and includig new screws including refixing the door shutters in same opening etc complete all as specified and directed by Engineer-in-Charge Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

Taking down aluminium windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium cleats of existing make and also refixng the locks & roller in existing postiion with and includig new screws including refixing the window shutters in same opening etc complete all as specified and directed by Engineer-in-Charge Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

S&F in repars concealed star lock powder coated for aluminium window fixed as per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-Charge

S&F powder coated anodised aluminium fully glazed door shutters side hung type / sliding type with top channel and roller and accessary, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.complete all as specified (Note : Glass will measured and paid separately)

S&F powder coated anodised aluminium glazed window shutter side hung / sliding type, without sash bars, aluminium sections weighing 0.55 kg/m aluminium open track section having reqd size of style and top rails, bottom rails including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 No.) etc complete all as specified and directed by Engineer-in-Charge (Note : Glass will measured and paid separately)

M&L 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 Sq m in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers etc complete all as specified and directed by Engineer-in-Charge

M&L 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sq. m in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers etc complete all as specified and directed by Engineer-in-Charge

S&F 75mm size 6 lever brass body concealed lock with duplicate keys, fixed in aluminium doors as per manufacturers instruction etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 76,585.00 shall be deducted from BOQ on account of schedule of credit

Ms. M.D. Auty

M/s.Abhay Kulkarni and Associates

OM SAI ASSOCIATES

M/s AG PATHAN

Ms. S.K. ASSOCIATES

M/S-B.R.SONAWANE

M/S. SHOURYA ENGINEERS AND CONTRACTORS