REPAIR/ MAINTENANCE OF EXTERNAL WATER SUPPLY, SLUICE VALVE, VALVE PIT CHAMBER AND FIRE HYDRENT AT NEW CANTT UNDER GE WEST PRAYAGRAJ.

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth as in soft/ loose soil including forming of bottom surface to required level or slope for laying of CI/ GI pipe complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm each complete all as specified and directed.

Removing of surplus excavated material (soil) to a distance n.exc 50m and deposited where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M&L for cutting of road metal surface for passing of pipe lines and making good the road surface with 150mm thick layer of compacted stone aggregate and existing thickness bituminous macadam or PCC 1:2:4 type B-1 using 20mm graded stone aggregate complete all as specified and directed. NOTE: (i) Excavation and earth work shall be measured and paid separately under relevant item. (ii) Proper compaction shall be done to avoid any settlement.

Taking up old rusted/ worn out/ corroded cast iron pipe 80mm bore including all fitting with spigot and socket ends and lead joints including burning but joints and recovering lead complete all as specified and directed. NOTE: Excavation and earth work shall be measured and paid separately under relevant item.

Taking up old rusted/ worn out/ corroded cast iron pipe 100mm bore including all fitting with spigot and socket ends and lead joints including burning but joints and recovering lead complete all as specified and directed. NOTE: Excavation and earth work shall be measured and paid separately under relevant item.

Taking up old rusted/ worn out/ corroded cast iron pipe 150mm bore including all fitting with spigot and socket ends and lead joints including burning but joints and recovering lead complete all as specified and directed. NOTE: Excavation and earth work shall be measured and paid separately under relevant item.

Taking up 250 mm asbestos cement pressure pipes, any class, (including all fittings), including disconnecting pipes and fittings complete NOTE: Excavation and earth work shall be measured and paid separately under relevant item complete.

M&L for cast iron pipe 80mm bore Class 'LA' with spigot and socket ends centrifugally cast, in any length, suitable for lead joints, laid in trenches complete all as specified and directed.

All as per Srl item No. 9 but except pipe complete all as specified and directed complete all as specified and directed. NOTE: Old serviceable cast iron/DI pipe retrieved from taking down shall be used after cleaning and removal of all blockages from pipe by using splatted bamboo / steel rod before fixing.

M&L for cast iron pipe 100mm bore Class 'LA' with spigot and socket ends centrifugally cast, in any length, suitable for lead joints, laid in trenches complete all as specified and directed.

All as per Srl item No. 11 but except pipe complete all as specified and directed complete all as specified and directed. NOTE: Old serviceable cast iron/DI pipe retrieved from taking down shall be used after cleaning and removal of all blockages from pipe by using splatted bamboo / steel rod before fixing.

M&L for cast iron pipe 150 mm bore Class 'LA' with spigot and socket ends centrifugally cast, in any length, suitable for lead joints, laid in trenches complete all as specified and directed.

All as per Srl item No. 13 but except pipe complete all as specified and directed complete all as specified and directed. NOTE: Old serviceable cast iron/DI pipe retrieved from taking down shall be used after cleaning and removal of all blockages from pipe by using splatted bamboo / steel rod before fixing.

M&L for ductile iron pipe 100mm bore Class 'K-9' with spigot and socket ends centrifugally cast, suitable for titan type joints, in any length, laid in trenches complete all as specified and directed.

M&L for ductile iron pipe 150mm bore Class 'K-9' with spigot and socket ends centrifugally cast, suitable for titan type joints, in any length, laid in trenches complete all as specified and directed.

M&L for ductile iron pipe 250mm bore Class 'K-9' with spigot and socket ends centrifugally cast, suitable for titan type joints, in any length, laid in trenches complete all as specified and directed.

M&L for run lead joints for cast iron spigot and socketed pipes and filling of 80mm bore pipe joint complete all as specified and directed.

M&L for run lead joints for cast iron spigot and socketed pipes and filling of 100mm bore pipe joint complete all as specified and directed.

M&L for run lead joints for cast iron spigot and socketed pipes and filling of 150mm bore pipe joint complete all as specified and directed.

M&L for rubber gasket joints (Tyron joints) for cast iron spigot and socketed pipes and filling of 100 mm bore pipe joint complete all as specified and directed.

M&L for rubber gasket joints (Tyron joints) for cast iron spigot and socketed pipes and filling of 150 mm bore pipe joint complete all as specified and directed.

M&L for rubber gasket joints (Tyron joints) for cast iron spigot and socketed pipes and filling of 250 mm bore pipe joint complete all as specified and directed.

M&L for clamp joint with rubber or fiber board gasket including nut and bolts for straight end joint to flanged pipes and fittings of 80mm bore pipe joint complete all as specified and directed.

M&L for clamp joint with rubber or fiber board gasket including nut and bolts for straight end joint to flanged pipes and fittings of 100mm bore pipe joint complete all as specified and directed.

M&L for clamp joint with rubber or fiber board gasket including nut and bolts for straight end joint to flanged pipes and fittings of 150mm bore pipe joint complete all as specified and directed.

S&F CI fittings like bends, (any type, radius and angle), tapers any type (straight bend, increasing, decreasing or double socket etc), Tee pieces, single branch, 'Y' junction, double branch, cross (all socket or socket and spigot), collars, caps and plugs etc. suitable for pipe up to 150mm bore complete all as specified and directed.

S&F 80mm bore sluice valve, heavy duty both ends flanged class PN-I with high tensile brass spindle cast iron head operated wheel and cap top, nuts and bolts, washers including 3mm thick rubber gasket joint including taking down old unserviceable valve complete all as specified and directed.

S&F 100mm bore sluice valve, heavy duty both ends flanged class PN-I with high tensile brass spindle cast iron head operated wheel and cap top, nuts and bolts, washers including 3mm thick rubber gasket joint including taking down old unserviceable valve complete all as specified and directed.

S&F 150mm bore sluice valve, heavy duty both ends flanged class PN-I with high tensile brass spindle cast iron head operated wheel and cap top, nuts and bolts, washers including 3mm thick rubber gasket joint including taking down old unserviceable valve complete all as specified and directed.

S&F 250mm bore sluice valve, heavy duty both ends flanged class PN-I with high tensile brass spindle cast iron head operated wheel and cap top, nuts and bolts, washers including 3mm thick rubber gasket joint including taking down old unserviceable valve complete all as specified and directed.

Taking out of 100mm bore sluice valve for repair, refacing, regrinding, repacking stuffing box of sluice valve spindle including taking apart and reassembling including replacement of gland packing, nut, bolts etc. and refixing the same complete all as specified and directed.

Taking out of 150mm bore sluice valve for repair, refacing, regrinding, repacking stuffing box of sluice valve spindle including taking apart and reassembling including replacement of gland packing, nut, bolts etc. and refixing the same complete all as specified and directed.

Taking out of 250mm bore sluice valve for repair, refacing, regrinding, repacking stuffing box of sluice valve spindle including taking apart and reassembling including replacement of gland packing, nut, bolts etc. and refixing the same complete all as specified and directed.

S&F in replacement 100mm bore cast iron non returning valve, heavy duty both ends flanged, with nuts, bolts and washers including 3mm thick rubber gasket joint complete all as specified and directed.

S&F in replacement 150mm bore cast iron non returning valve, heavy duty both ends flanged, with nuts, bolts and washers including 3mm thick rubber gasket joint complete all as specified and directed.

S&F in replacement 150mm bore S G iron body Wafer type check valves/ non returning valve,, with nuts, bolts and washers including 3mm thick rubber gasket joint complete all as specified and directed.

S&F in replacement 100mm bore butterfly valve IS:13095 (wafer type), gear operated, ISI marked, heavy duty both ends flanged, including nuts, bolts and washers including 3mm thick rubber gasket joint complete all as specified and directed.

S&F in replacement 150mm bore butterfly valve IS:13095 (wafer type), gear operated, ISI marked, heavy duty both ends flanged, including nuts, bolts and washers including 3mm thick rubber gasket joint complete all as specified and directed.

M&L for detecting of actual leakage joint of CI/DI pipe line and repairing the same by burning of lead joint, repair the joint with making fresh run lead joint with retrieved lead including new lead, if required and testing including excavation up to one cum, returning filling in for 80mm bore pipe complete all as specified and directed.

M&L for detecting of actual leakage joint of CI/DI pipe line and repairing the same by burning of lead joint, repair the joint with making fresh run lead joint with retrieved lead including new lead, if required and testing including excavation up to one cum, returning filling in for 100mm bore pipe complete all as specified and directed.

M&L for detecting of actual leakage joint of CI/DI pipe line and repairing the same by burning of lead joint, repair the joint with making fresh run lead joint with retrieved lead including new lead, if required and testing including excavation up to one cum, returning filling in for 150mm bore pipe complete all as specified and directed. NOTE FOR SRL ITEM NO. 40.00, 41.00 & 42.00: Contractor shall execute the work immediately as and when complaint received. Contractor will be responsible for any damage on account of delay in execution of work.

Construction of brick masonry valve pit chamber of size 1050x1050x1050mm (internal dimensions) including PCC, brick work and 3mm thick MS sheet cover, MS frame of angle iron size 40x40x6mm around valve pit, locking arrangement with pad lock of size 50mm dia brass 6 levers with duplicate keys (make:- Godrej) and painting all steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer including dismantling of existing damaged chamber complete all as specified and directed.

Construction of brick masonry valve pit chamber of size 900x900x900mm (internal dimensions) including PCC, brick work and 3mm thick MS sheet cover, MS frame of angle iron size 40x40x6mm around valve pit, locking arrangement with pad lock of size 50mm dia brass 6 levers with duplicate keys (make:- Godrej) and painting all steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer including dismantling of existing damaged chamber complete all as specified and directed.

Construction of brick masonry valve pit chamber of size 600x600x600mm (internal dimensions) including PCC, brick work and 3mm thick MS sheet cover, MS frame of angle iron size 40x40x6mm around valve pit, locking arrangement with pad lock of size 50mm dia brass 6 levers with duplicate keys (make:- Godrej) and painting all steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer including dismantling of existing damaged chamber complete all as specified and directed.

M&L for repair to existing valve pit chamber of size 1050x1050mm comprising of desludging and cleaning, repair to chamber with cement mortar 1:4, repair to MS cover with necessary welding or changing of hinges etc. for smooth functioning complete all as specified and directed.

M&L for repair to existing valve pit chamber of size 600x600mm comprising of desludging and cleaning, repair to chamber with cement mortar 1:4, repair to MS cover with necessary welding or changing of hinges etc. for smooth functioning complete all as specified and directed.

Taking up or down old rusted/ worn out 15mm bore GI steel water tubing and connections complete all as specified and directed.

Taking up or down old rusted/ worn out 20mm bore GI steel water tubing and connections complete all as specified and directed.

Taking up or down old rusted/ worn out 25mm bore GI steel water tubing and connections complete all as specified and directed.

Taking up or down old rusted/ worn out 40mm bore GI steel water tubing and connections complete all as specified and directed.

Taking up or down old rusted/ worn out 50mm bore GI steel water tubing and connections complete all as specified and directed.

Taking up or down old rusted/ worn out 80mm bore GI steel water tubing and connections complete all as specified and directed.

M&L 15mm bore galvanised steel water tubes 'medium grade' with all fittings laid in trenches or fixed to wall and ceilings or laid in floors complete all as specified and directed.

M&L 20mm bore galvanised steel water tubes 'medium grade' with all fittings laid in trenches or fixed to wall and ceilings or laid in floors complete all as specified and directed.

M&L 25mm bore galvanised steel water tubes 'medium grade' with all fittings laid in trenches or fixed to wall and ceilings or laid in floors complete all as specified and directed.

M&L 40mm bore galvanised steel water tubes 'medium grade' with all fittings laid in trenches or fixed to wall and ceilings or laid in floors complete all as specified and directed.

M&L 50mm bore galvanised steel water tubes 'medium grade' with all fittings laid in trenches or fixed to wall and ceilings or laid in floors complete all as specified and directed.

M&L 80mm bore galvanised steel water tubes 'medium grade' with all fittings laid in trenches or fixed to wall and ceilings or laid in floors complete all as specified and directed.

All as per Srl item No. 54 but except pipe complete all as specified & directed. Note:- Pipe obtained from taking down shall be used.

All as per Srl item No. 55 but except pipe complete all as specified & directed. Note:- Pipe obtained from taking down shall be used.

All as per Srl item No. 56 but except pipe complete all as specified & directed. Note:- Pipe obtained from taking down shall be used.

All as per Srl item No. 57 but except pipe complete all as specified & directed. Note:- Pipe obtained from taking down shall be used.

All as per Srl item No. 58 but except pipe complete all as specified & directed. Note:- Pipe obtained from taking down shall be used.

All as per Srl item No. 59 but except pipe complete all as specified & directed. Note:- Pipe obtained from taking down shall be used.

S&F in repair 15mm bore stop valve cast copper alloy bright finished body, screwed down, high pressure with crutch handle, opening fully way screwed both ends externally threaded for iron pipe or for union complete all as specified and directed. NOTE: Weight of one stop valve shall not less than 400 gms.

S&F in repair 20mm bore stop valve cast copper alloy bright finished body, screwed down, high pressure with crutch handle, opening fully way screwed both ends externally threaded for iron pipe or for union complete all as specified and directed. NOTE: Weight of one stop valve shall not less than 500 gms.

S&F in repair 25mm bore stop valve cast copper alloy bright finished body, screwed down, high pressure with crutch handle, opening fully way screwed both ends externally threaded for iron pipe or for union complete all as specified and directed. NOTE: Weight of one stop valve shall not less than 600 gms.

S&F 40mm bore gun metal, globe or gate valves, with iron wheel heads, screwed both ends for iron pipes and fixed complete all as specified and directed.

S&F 50mm bore gun metal, globe or gate valves, with iron wheel heads, screwed both ends for iron pipes and fixed complete all as specified and directed.

M&L for cutting of cast iron pipes in position for insertion of new tees, branches, etc. and reducing to required length of 100mm bore of pipe complete all as specified and directed.

M&L for cutting of cast iron pipes in position for insertion of new tees, branches, etc. and reducing to required length of 150mm bore of pipe complete all as specified and directed.

M&L drilling and tapping cast iron water mains (in position) for branch connection of 20mm bore CI/GI pipe including and provn of suitable size MS clamp with nuts, bolts and washers and welded with one GI socket complete all as specified and directed.

Supply and testing Chlorine testing kit with Reagent Bottle,Colour Comparator, Test Jar complete Make: Tolexo/REMCO/Koundal complete all as specified and directed

M&L for testing of water samples including collection of samples in bottles/containers and depositing to testing agency i.e. CGWB, UP Pollution Control Board or any approved Govt. lab in same day and submitting results complete all as specified for following parameters:- (a) Turbidity, (b) Ph value, (c) Total hardness, (d) Iron, (e) Chloride, (f) Residual Free Chloride, (g) Fluoride, (h) Dissolved Solids, (j) Calcium, (k) Mercury, (l) Arsenic, (m) Lead, (n) Pesticides, (o) Alkalinity, (p) Nitrate, (q) Total collifarm, (r) e- Collifarm.

M&L for decanning of Water Sump of Fountain including cleaning, desludging, scrapping, painting with two coats of synthetic enamel paint in required shade including repair of leakage of sump with required existing PCC 1:2:4 type B-1 and cement plaster in CM 1:4 complete all as specified.

S&F in replacement Chromium plated Brass nozzles of size 1" dia of water fountain complete all as specified and directed.

S&F in replacement Chromium plated Brass nozzles of size 1/2" dia DN15 High Quality Brass Column Fireworks Fountain Nozzles Sprinkler Spray Head NB0374 having 17 holes of water fountain complete all as specified and directed.

S&F in replacement under Water LED fountain light with water tight enclosure of approved shade of water fountain complete all as specified and directed. Make: Electrolyte cat no. SLUW302 or equivalent as approved in Philips/ BAJAJ/ L&T/ Crompton.

S&F in replacement under Water Submersible Light LED fountain light fittings Lamp 3x20W with Transformer 12v/50Hz 60VA with water tight enclosure including LED lamp of approved shade of water fountain complete all as specified and directed. Make: Philips/ BAJAJ/ L&T/ Crompton.

S&F in replacement horizontal type Submersible pump, 3 HP capacity, single phase 230 Volts from water fountain including connection complete all as specified and directed.

S&F in replacement horizontal type Submersible pump, 1.5 HP capacity, single phase 415 Volts from water fountain including connection complete all as specified and directed.

S&F in replacement pressure pump, 3/4 HP capacity, single phase 230Volts with pressure tank & auto cut off mechanism at 2 Kg/cmsq pressure complete all as specified and directed. Make: KSB/ L&T/ Crompton.

M&L for cleaning and disinfecting of over head tanks of capacity 45000 litres to 100000 litres located at Estate and depot area Allahabad complete all as specified and directed comprising with the following operations:- (i) In the first step, dewatering of OH tank shall be carried out with portable submersible pump with flow rate not less than 30000 litres/hr. (ii) In the second step, removal of left over dirty water and sludge shall be carried out with suitable sludge removal pump. (iii) In the third step, cleaning of internal walls, floors, ceiling of OH tank by high pressure water jet is to be done. High pressure machine should develop pressure 80-120 bar. It should be ensured that no dirt, algae or mass shall remain on surface of tank. (iv) In the fourth step, removal of remaining sludge shall be carried out with industrial vacuum cleaner. (v) In the fifth step, OH tank shall be sterilized by spraying anti bacterial agent (Tanclean or equivalent as approved) using high pressure machine. Dose of this agent must be as per OCED guidelines 423 adopted on 17 Dec 2001 (i.e. 1 litre of concentrated agent mixed with 40 litres of water to produce mixture. 1 litre of this mixture is to be used to disinfect 10000 litres capacity tank and higher capacity tanks in proportion). (vi) In the last step, treatment of inside tank by exploring UV radiation to kill further suspended or floating bacteria. This is to be done by glowing UV lamp inside tank as per NSF standard 55-1991 (i.e. 16000 µW-sec/cm² or in other words 3-5 minutes according to capacity of tank). Notes: (a) The work should be got executed through reputed specialized water tank cleaning agency and shall be approved in writing by GE before commencement of this work. (b) After completion of work a certificate regarding bacteria free should be submitted to Deptt. (c) Coloured photographic evidence of stage wise cleaning of OHT shall be submitted in duplicate to the Deptt. (d) Date of Cleaning, date of expiry and capacity of tank will be written on OHT with Paint with 5cm high letters or figures (Block, Roman) complete. (e) The cost of above requirement is deemed to be inclusive in contractor's quoted rates and no any extra payment shall be admissible on this account.

M&L for detecting of actual leakage of water main pipe line as per complaint received from deptt on daily complaint basis and repairing the same including necessary fittings as required and testing including excavation up to one cum, returning filling in for 50mm bore GI pipe complete all as specified and directed.

M&L for detecting of actual leakage of water main pipe line as per complaint received from deptt on daily complaint basis and repairing the same including necessary fittings as required and testing including excavation up to one cum, returning filling in for 40mm bore GI pipe complete all as specified and directed.

M&L for detecting of actual leakage of water main pipe line as per complaint received from deptt on daily complaint basis and repairing the same including necessary fittings as required and testing including excavation up to one cum, returning filling in for 25/20mm bore GI pipe complete all as specified and directed. NOTE FOR SRL ITEM NO. 85.00, 86.00 & 87.00: Contractor shall execute the work immediately as and when complaint received. Contractor will be responsible for any damage on account of delay in execution of work. Necessary fitting as required shall be paid as supply only under respective item.

Supply only GI union 20 mm dia complete all as specified and directed

Supply only GI union 25 mm dia

Supply only GI union 40 mm dia

Supply only GI union 50 mm dia

Supply only GI long screw with socket or check nut 20 mm dia

Supply only GI long screw with socket or check nut 25 mm dia

Supply only GI long screw with socket or check nut 40 mm dia

Supply only GI socket 20 mm dia

Supply only GI socket 25 mm dia

Supply only GI socket 40 mm dia

Supply only GI socket 50 mm dia

Supply only GI elbow 20 mm dia

Supply only GI elbow 25 mm dia

Supply only GI elbow 40 mm dia

Supply only GI elbow 50 mm dia

Supply only GI CI bib tap 20 mm dia

Supply only GI CI gate valve 25 mm dia

Supply only GI reducer 20x25 mm dia

Supply only GI reducer 40x25 mm dia

Supply only GI reducer 80x65 mm dia

Supply only GI flange 80 mm dia with nut bolts

Supply only GI Nipple 80 mm dia

Supply only rubber gland

Servicing of Water level sensor i/e. removing, cleaning , checking for wear and tear, refixing, installing, commissioning & testing complete all as specified and directed.

S&F with wiring of Magnetic Level sensors inside tank/sump complete all as specified and directed.

Servicing of Motorised Butterfly Valve of size 150mm/200mm i/e. removing, cleaning, greasing, checking for wear and tear, refixing, testing, installing, commissioning complete all as specified and directed.

S&F of Electric motor suitable for 150mm dia butterfly valve with gear mechanism complete all as specified and directed. Make: EMTORK/S M INSTRUMENTATION/RDS

S&F of Electric motor suitable for 200 mm / 250 mm dia butterfly valve complete all as specified and directed. Make: EMTORK/S M INSTRUMENTATION/RDS

S&F of M. S. spiral gear with suitable gear ratio for gear box of actuator model No. QT-10/QT-20 for 150 mm / 200 mm dia butterfly valve complete all as specified and directed. Make: S M INSTRUMENTATION / S D TORQUE/ MARSH

S&F of M. S. sector gear with suitable gear ratio for gear box of actuator model No QT-10/QT-20 for 150 mm / 200 mm dia butterfly valve complete all as specified and directed. Make: S M INSTRUMENTATION/S D TORQUE/MARSH

S&F of Limit Switch for actuator suitable for 50mm to 300mm any size butterfly Valve with proper wiring complete all as specified and directed. Make: CHERRY/L&T/INVENTO/HONEYWELL

Supply and Fixing of resistor for actuator suitable for 150mm or any size butterfly valve with complete wiring complete all as specified and directed. Make: CERMET/VARIOHM/EMTORK

Supply and Fixing of capacitor for actuator suitable for 50mm or any size Butterfly valve with complete wiring complete all as specified and directed. Make: CTR/DELCON/SUN/EPCOS

S&F of Hand wheel for actuator suitable for 50mm or any size butterfly valve complete all as specified and directed. Make: S M INSTRUMENTATION/ S D TORQUE/EMTORK/RDS

S&F of Single Phasing Preventer Model: VSP D2 complete all as specified and directed. Make: Minilec/ L&T/ C&S

S&F of Relay 240V AC/ 24V DC for PLC Panel with proper wiring of relay base having 4 NO/NC complete all as specified and directed. Make: IDEC/BCH/SCHNEIDER/OMRON.

S&F of Indicator lamp of 24 V DC. Colour: RED/YELLOW/GREEN complete all as specified and directed. Make: ESBEE/SCHNEIDER/TEKNIK

S&F of Indicator lamp of 240 V AC. Colour: RED/YELLOW/GREEN complete all as specified and directed. Make: ESBEE/SCHNEIDER/TEKNIK

S&F of step down transformer 240V AC-12 VAC, 3 AMP complete all as specified and directed . Make: AIM/CTR

S&F of Push button with LED Indicator- 240V AC Colour: RED/YELLOW/GREEN complete all as specified and directed. Make: ESBEE/TEKNIK/SCHNEIDER

S&F of SMPS 24 V DC,4.2 AMP or as per ground requirement complete all as specified and directed. Make: SCHNEIDER/NHP/MINWELL

S&F of 6 core X 1.5 sq.mm dia. PVC insulated copper stranded dry armoured cable complete all as specified and directed. Make: POLYCAB/FSC/DELTON/FINOLEX.

S&F of 5 Pair X 0.5 sq.mm dia. PVC insulated copper stranded dry armoured cable complete all as specified and directed. Make: POLYCAB/FSC/DELTON/FINOLEX.

S&F in replacement of 63 mm dia gun metal branch pipe (20mm dia nominal internal diameter ) and nozzle conforming to IS 903 suitable for instantaneous connections including hose pipe 15 mtrs long coupling as required complete all as specified and directed

S&F in replacement of Hose cabinet of size 750mm x 600mm x 500mm made of 2mm thick MS sheet with 4mm thick glazed glass doors i/c necessary locking arrangement suitable to accommodate 15 mtr . Long hose pipe , 1 No. branch pipe mounted on wall OR raised brick platform & duly painted with Scarlet red colour complete all as specified and directed

S&F in replacement of Hose reel drum 30 mtr long with 63 mm dia gun metal branch pipe (20mm dia nominal internal diameter ) and nozzle conforming to IS 903 suitable for instantaneous connections complete all as specified and directed.

Supply, laying and testing in replacement of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core complete all as specified and directed.

Supply, laying and testing in replacement of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and directed.

Supply, installation, testing and commissioning in replacement of indoor type cubical panel board suitable for 3 phase, 4 wire, 415V, 50 Hz and CPRI approved manufacturer factory fabricated with CRCA sheet not less than 3 mm thick having modern fabrication process powder coating in approved shade having thickness not less than 100 microns provided with suitable gasket to make it dust and vermin proof and general constructions conforming to IS : 8623/93. The LT panel shall be front and back operable and duly compartmentalized for each control gears. The panel should have suitable size of aluminium Bus -bar three phase 4 wire system having current carrying capacity 400 Amps of the incomer MCCB. The panel should have the following incoming and out going controls duly fixed with the panel by means of suitable link plates complete all as specified and directed . Note:- PCC platform of suitable size for mounting the LT Panel is deemed to be included in the quoted rate.

(i) MCCB 4, pole 35 KA with adjustable thermal setting, 415V, 160 Amp - 01 No. (ii) MCCB 4, pole 35 KA with adjustable thermal setting, 415V, 100 Amp - 01 No (iii) Star delta starter comprising suitable size of 3 pole contactors for 40 HP submersible pump with thermal over load relay complete - 01 No (iv) Motor protection relay for single phase, over load, over voltage (v) Digital Volt meter 0-500 volts (vi) Ammeter 0-500 amps with suitable size of Cts (vii) All connections to be done through suitable size PVC insulated copper cables (viii) LED RYB indicator - 01 Set (ix) MCB' TP 32 Amps 10 KA - 01 No (X) MCB SPN 32 Amps 10 KA - 01 No (xi) Single phase preventer - 01 No

MAYANK ENTERPRISES

Ambrish Builders

ARADHYA ENTERPRISES