REWIRING OF CERTAIN BLDGS AND CONNECTED ITEMS FOR JCO/ORS MD ACCN AND OFFICE BUILDINGS OF GRC, APS, MH AND MICTS UNDERE GE KAMPTEE

Amount

Taking down point wiring with aluminium conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper to match with existing wall/floor/ceiling finishes complete all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and directed.

Material and labour point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly. (ii) The quoted rate shall be included cost of cutting chases etc of surface wall including re-surfacing.

All as per item No 4.00 herein-before ,but one ceiling/exhaust/wall mounted fan point controlled by one switch and regulator, complete all as specified and directed.

All as per item No 4.00 herein-before , but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 4.00 herein-before , but one 3 pin 5 amps socket out let point on independent board complete all as specified and directed.

All as per item No 4.00 herein-before , but one bell/buzzer point controlled by one bell push complete all as specified and directed.

M&L point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 2.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 2.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one 15 Amp power point controlled by one, one way switch. Note :- (i) Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly. (ii) The quoted rate shall be included cost of cutting chases etc of surface wall including re-surfacing.

Material and labour for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of size 2x2.5 Sqmm with earth wire of 1x2.5 Sqmm complete all as specified and directed. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

All as per item No 10.00 herein-before but 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed.

All as per item No 10.00 herein-before but 2x 6.0 Sqmm with earth wire of 1x6.0 Sqmm complete all as specified and directed.

All as per item No 10.00 herein-before but 4x 6.0 Sqmm with earth wire of 2x6.0 Sqmm complete all as specified and directed.

All as per item No 10.00 herein-before but 4x 10 Sqmm with earth wire of 2x10.0 Sqmm complete all as specified and directed.

Supply and fix ceiling rose surface type 2/3 terminal 5 amps complete all as specified and directed.

Supply and fix bell ding dong, AC 230 volts, single phase complete all as specified and directed.

Supply and fix lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and directed.

Supply and fix modular switch one way 6A, 1 module complete all as specified and directed.

Supply and fix modular switch two way 6A, 1 module complete all as specified and directed.

Supply and fix modular switch one way 16A, 1 module complete all as specified and directed.

Supply and fix modular bell push 6A, 1 module complete all as specified and directed.

Supply and fix modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.

Supply & fix modular socket 6A/ 16A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix modular fan step regulator,120 watt 2 module complete all as specified and directed.

Supply and fix Highly durable surface mounted 18/20 watts LED batten/surface constructed of fire retardant engineering grade extruded aluminium body 100 lumen per watt, min 2000 lumen and decorative end cap complete with driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and directed.

Material and labour for removing existing LED battens of any size and refixing to the locations as directed including clips and connected to ceiling roses for proper functioning complete all as specified and directed.

Supply and fix light fitting 9W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50HZ complete all as specified and directed.

Supply and fix fittings with surface mount LED down lighters 12 W including driver with rated voltage 240 V , 50 Hz complete all as specified and directed.

Supply and fix fittings with surface/recessed mount LED down lighters 12 W, warm white with 3000-4500K colour temperature including driver with rated voltage 240 V , 50 Hz, complete all as specified and directed.

Supply and fix Energy efficient surface mounted 2'X2' grid Ceiling LED fitting 36/40 W rated voltage 240 V, 50Hz combination with profiled and flat diffuse complete all as specified and directed.

Supply and fix Energy efficient surface mounted 1'X1' grid Ceiling LED fitting 24 W rated voltage 240 V, 50Hz combination with profiled and flat diffuse,complete all as specified and directed.

Supply and fix LED baton fitting 2' length including drivers having energy consumption, 10/11W ,230 V ,50Hz, 6500K, not less than 1000 lumen prewired, complete all as specified and directed.

S&F LED strip 5m long 25W 240V 50Hz with drivers and fixing arrangement complete all as specifed and directed.

Supply and fix building security light LED 25 W with Lumen O/P 2500 with driver with rated voltage 240 V, 50Hz, including mounting GI made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc complete all as specified and directed.

Supply and fix electronic LED driver with thermal, short circuit & overload protection for LED 2'x2' grid ceiling light 12 W to 36 W with rated voltage 240 V, 50Hz complete all as specified and directed.

Supply and fixing tubular LED lights 12W, 240 volts, 50 Hz colour temp 3000K warm white complete all as specified and directed. Make : C&S, G24 tubular lamps SL-07/19 or equivalent in Syska /Philips/ Bajaj/Crompton

Material and labour for cutting & taking out the existingsurface/sunken box/switch plate with switches/ sockets of 3 module and re-fixing with new 3 module metal sunken box with cover plate and frame suitable for modular switches/sockets/regulators etc complete all as specified and directed. Note:- The disturbed surfaces of wall for concealing box wiring shall be made good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The rate shall be deemed to include the cost of making good. Switches, sockets, regulators etc to be measured and paid separately.

All as per item No 37.00 herein-before but modular metal flush box with modular cover plate with frame 4 module complete all as specified and directed.

All as per item No 37.00 herein-before but modular metal flush box with modular cover plate with frame 6 module complete all as specified and directed.

All as per item No 37.00 herein-before but modular metal flush box with modular cover plate with frame 8 module complete all as specified and directed.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 4/6 way with 200 Amp rated bus bar flush /surface mounting double door, complete all as specified and directed.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed. Makes:- L&T/Legrand/C&S/Havells

Supply and fix sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed. Makes:- L&T/Legrand/C&S/Havells

Supply and fix sheet metal enclosure vertical triple pole & neutral (VTPN) with MCCB 63 amps for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed. Makes:- L&T/Legrand/C&S/Havells

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series complete all as specified and directed.

Supply and fix MCB single pole and neutral 240 volt 6 to40 amps 10 KA breaking capacity, 'C' series, complete all as specified and directed.

Supply and fix MCB triple pole and neutral 415 volt 40 to 60 amps 10 KA complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete (1:2:4) type B-1 (c) Pre cast RCC cover with suitable handle 40mm thick in PCC (1:2:4) reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.40810.00]

Paragon Electrotechnics

M/S. ELECTROPOWER TECHNOLOGIES

Bidder Name

Paragon Electrotechnics

Chinmaya Enteprises

M/S. ELECTROPOWER TECHNOLOGIES