WBPHED/12/EE/BOLMD/24-25

Amount

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) with Earth obtained from excavation of foundation.

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand.

Filling in foundation or plinth by fine sand in layers not exceeding 150 mm. as directed and consolidating same by thorough saturation with water ramming complete, including the cost of supply of sand. (Payment to be made on measurement of finished quantity)

Reinforcement for reinforced concrete works in all sorts of structures including distribution bars ,strrups, binder etc including of rods initial straightening & removal of lose rust (if necessery) Cutting to requiste length, hooking & binding with 16 guage black annclead wire at every intersection. Complete as per drawing & direction For works in Foundation basement & upto roof of ground floor to 4m For steel/ Mild steeI. Category A: TATA/ SAIL/ RINL

25 mm. thick damp proof with cement concrete (1:1.5:3) (with graded stone aggregate 10 mm. normal size) and painting the top surface with a coat of bitumen [VG.40 ] using 1.7 kg. per sq.m. including heating the bitumen and cost and carriage of all materials complete. [Bitument to be supplied by the Agency]

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.9i) pakur variety)

(I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor( A) [Pakur Variety] (a) 1:3:6 proportion

Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of G. F.)

(a) 25 mm to 30 mm thick wooden shuttering without staging

(b) 25 mm to 30 mm thick wooden shuttering with staging

Brick work with 1st class bricks in cement mortar (1:6)

For wall( GL to PL)

(b) in superstructure

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary (ground floor)

(b) 15mm thick plaster with (6:1) cement morter

Neat cement punning about 1.5mm th.in wall,dado,floor

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement

Applying exterior grade Acrylic primer of approved quality----in/c scraping and preparing the surface throughly,complete---(Two coats)

Protective and decorative Acrylic exterior emulsion paint-------(a) super protective 100% acrylic emulsion

Dry Distemparing to interior walls or ceiling including cleaning, washing, smoothening surface (a) One Coat

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (b) Two Coats

i) Water based interior grade Acrylic Primer

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).

Sal : Local.

Supplying, fitting & fixing Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only]

Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials.

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm, Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

Priming one coat on timber, plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc including using of approved putty etc on the surface if necessary.

On timber or plastered surface with super gloss (hi gloss) 2 Coats (with any shade except white)

On steel or other metal surface with super gloss (hi gloss) of approved quality 2 coats (with any shade except white

Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)

40mm X 6mm, 250mm Length

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.

75 mm x 60 mm x 3.15 mm

100 mm x 75 mm x 3.50 mm

Iron door ring of approved quality fitted and fixed with nut and washer complete.

50 mm dia.

Iron socket bolt of approved quality fitted and fixed complete.

150 mm long x 10 mm dia bolt.

300 mm long x 10 mm dia bolt.

Iron Hasp bolt of approved quality fitted and fixed complete (oxidised) with 16 mm. dia rod with centre bolt and round fitting.

300 mm. long.

Iron catch hook of approved quality fitted and fixed to shutter and chowkat,

6 mm dia x 225 mm long.

Number of Plaque of buildings (Plaque size upto 225 mm x 225mm ) made of cement plaster(2:1)on face of wall or plinth , with 50 mm size letters P.H.E. and the number of the structure formed thereon (in sunk type)including painting the letters & the number complete as per direction. (Cement = 1 Kg/No )

R.C. shelves (1:1.5:3) either precast or cast in situ with stone chips and necessary reinforcement upto 1% (0.8% main and 0.2% distribution bars), shuttering etc and 10 mm thick cement plaster (4:1) including neat cement finishing and cutting chase fitting and fixing in position, mending good damages as necessary complete.

In ground floor. 37.5 mm thick panels. Other than Sail / Tata / Rinl.

Band moulding (horizontal-verticle) rectangular section made with cement plaster 4:1 complete in ground floor.

i) Projection upto 25 mm a)Depth or Width 75 mm to 100 mm. (Cement 1.25 kg/mtr).

Renewing throating, nosing or drip course moulding with 15 mm thick cement plaster (1:4) complete. (cement 0.7 kg/mtr). In ground floor.

Supply fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps, nails including making hole in wall, floor etc. cutting trenches in any soil through masonry concrete structures etc. if necessary and mending good damages including joining with jointing meterials (Spun yarn, Valamoid / Bitumen / M-Seal etc) complete. 75 mm dia.

Supplying Godrej mortice lock chromium plated with lach and keys 4 levers including fitting and fixing complete.

Supplying,fitting and fixing Fan Hook for ceiling with 1 metre long 16mm dia rod complete including mending damages .Payment for damage and repair to be made separately.

Supplying fitting approved type ventilator in position after cutting holes in walls,setting in cement mortar,mending damages to wall and plaster and two coats of paint of approved brand sand shade .Payment of mending good damages of wall & plaster and painting to be made separately R.C.C. ventilator of 20 mm thick. up to 0.10 m2 area.

Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer's specified rate) for concrete of various grades.

Cutting holes and subsequent mending good damages. Diameter upto 150 mm.

In brick work (Cement-4.0 kg/mtr)

In concrete work (plain or R.C.) [Cement- 3.0 Kg/Mtr]

Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. iii) 630 mm X 450 mm size

supplying,fitting and fixing PVC pipes of approved make of sch.80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI pipes as per IS:1239 (part-1) with all necessary accessories,specials viz socket, bend, tee, union, cross, elbow, nipple, longscrew, reducing socket etc----fitted with holder bats clamps,in/c cutting pipes,making threads, fitting, fixing etc complete in all respect including cost of all necessary fittings as required------any position above ground.(payment will be made on the centre nline measurements of total pipe line including specials). (a) 20mm

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).(viii) 20 mm dia

Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).

(i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar

supplying,fitting & fixing plastic water storage tank of approved quality with closed top with lid (black)-multilayer--(a) 500 litre capacity

Labour for hoisting plastic water storage tank---upto 1500 litre capacity (a0 upto 1st story from GL)

Add: GST @ 18% on sum of Item No: 1 to 48

Add Cess @1% on sum of Item No. 49

M/S. SARVATAH PROJECTS PRIVATE LIMITED

Swastik Enterprise