Providing, fitting of delivery pipeline of newly installed pumping unit no 2 and up gradation of delivery manifold at Lift irrigation station, Mandli.

Amount

Providing, fitting, welding and laying of MS delivery pipeline of 300 mm diameter and 6 mm thickness- 15 feet in length (including the size of vales) for 10 cusec x 30 meter head pumping unit no 2 from newly installed pump to delivery manifold. Providing, fitting of 5 number MS plate flanges of 300 mm internal diameter with suction pipe at different lengths. Welding of the flanges at the ends of pipes with double layered welding to avoid any leakages as per site conditions. Fabrication of one number MS bend of required angle as per alignment of delivery pipeline from 300 mm diameter MS Pipe with welding of 300 mm diameter MS plate flanges on both ends of bend. Providing and fitting of rubber gaskets between each MS flange joint. Fastening of delivery pipe with hexagonal bolts and nuts. The job includes dismantling of existing concrete structure to accommodate the delivery pipeline in proper alignment. Providing and fitting of flanged ends cast iron butterfly valve with PN 1.6, cast iron body, cast iron disc, SS body seat ring, rubber disc seal, SS shaft conforming to IS 13095 ( Kirloskar/ KSB/L&T Valves) on delivery side of the pumping unit with rubber gaskets, nuts and bolts on the delivery pipeline. Providing and fitting of flanged ends cast iron non return valve with PN 1.6 (Kirloskar / KSB/L&T Valves) on delivery side conforming to IS: 5312 with stainless steel hinge pin and flange drilling as per IS: 1538 of the pumping unit with rubber gaskets, nuts and bolts on the delivery pipeline. Up gradation of delivery manifold inside lift irrigation station by way of dismantling of existing delivery manifold of different size. The job includes providing and fitting of 15 ft of 300 mm diameter MS pipe to be installed and fastened to rising main by using MS flanges. The job includes providing, fitting, fabrication of 2 no’s MS bends on both ends of the manifold for delivery pipelines of pumping unit no 1 and 3 and fastening with MS flanges of 300 mm diameter. Fabrication, providing and fitting of two number T joints from 300 mm MS pipe for connecting delivery line of newly installed pumping unit no 2 and connecting of manifold to existing raising main. Delivery manifold includes the flanges at required portions, nuts, bolts and rubber gaskets. Providing and fitting of 8 number heavy duty GI sheets 10 feet x 3.5 ft of reputed make (Tata/ Essar / Bushan ) on the roof and sides of voltage stabilizer room with nut, bolts and washers. The job includes removing of existing damaged sheets with cutter and manual labour. Complete job includes cost of material, welding charges, skilled/ semi-skilled labour, transportation charges, carriage charges of material on head load from road side to lift station on head load. The firm have to quote the rates after give rebate on old scrap except control valves. Note:- The Tenderers are requested to visit the site and quote the rate as per site conditions. Dimensions can vary by +- 5 percent. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions.

TRIKUTA ELECTRICAL AND MECHANICAL WORKS

BEE AAR ENTERPRISES

M.S J K HYDRAULIC ENGGG AND FABRICATOR WORKS