CERTAIN MISC BR REPAIR TO VARIOUS ACCN AT SMALL UNIT AT MANEKSHAW MARG AND 3 JAK RIF IN AOR OF BRII UNDER GE NARANGI

Amount

Dismantling of plain or corrugated steel sheeting any gauge/thickness in roof or wall covering complete all as directed.

Material and labour Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and directed.

Supply and fix in repairs hollow PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawingcomplete all as specified and directed.

Supply and fix in repairs solid PVC in ceiling Lining consisting of 5mm thick All as per item above but wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on GI frame of perimeter channel of size 0.50mm thick (having one flange of 20mm and another flange of 30mm and web of 27mm) along with the perimeter of ceiling srceww to brick wall with the help of nylon sleeves an suspended intermediate channel of size (0.80mm thick with two equal flanges each 15mm ) from the soffit at 900mm centre with ceiling angle (0.50mmx10mmx25mm) fixed to soffit with the help of soffit cleat and rawl plug and celiling section of 0.50mm thick having web of 80mm and two flanges of 26mm each with leps of 10.5m are then fixed to the intermediate channel and direction perpendicular intermediate cannel at 457mm c/c, as per specifications and drawing complete all as specified and directed.

Supply and fix in repairs suspended false ceiling using E-grid (exposed ceiling suspension system) of grid size 600x600mm with main runner 38mmx24mm and wall angle 24mmx24mm using 4mm thick Non Asbestos fiber cement designer board (E-Board classic) in a grid of GI system duly suspended with 4mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220mm maximum c/c, the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall, flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c so as to from 600x600mm grid and painted with two coats of OBD over a coat of primer before installing it on the grid all as specified and directed.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for 75 mm thick, PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide and 30 mm deep at every 2.4 mtrs interval filled with sealing compound grade 'A' etc complete all as specified and as direted.

Material and labour for PCC 1:3:6, type C0 (using 12.50mm graded stone aggregate) as in back filling in pressed steel door and window frame complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4, type B-1, (using 20 mm graded stone aggregate) as in benching, coping, haunching between roof and wall or parapet wall, between chajja and wall etc, finishing the exposed surface of concrete even and fair including all necessary form work all as specified and as directed.

Material and labour for plain cement concrete 1:3:6, type C2( using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed.

Material and labour for 25mm thick PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in floors finished even and smooth without using extra cement including concrete colour pigment on floors complete all as specified and as directed.

Material and labour for 100 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in subabse finished to receive floor treatment etc complete all as specified and as directed.

Material and labour for 75 mm thick plain cement concrete (1:2:4) type B-2 (using 40 mm graded crushed stone aggregate) as in floors/ sub base of tiles/floor of hard standing/path etc complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillar including coping etc. complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

All as item No 15 above but except bricks complete all as specified and directed.

Material and labour for brick work with sub class ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour providing precast cement concrete louvres and Jallies 25 mm thick in cement morter 1:4 (measured in solid) incl all moulding complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Material and labour for rendering 5mm thick in cement mortar (1:3) on fair faces of RCC concrete ceiling surfaces and including applying cement slurry in bottom of slab, chajjas, fin, facias etc. complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick/concrete surfaces finished even and smooth without using exta cement with using WPC @3% by the weight of cement complete all as directed.

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of acrylic distemper over a coat of alkali resistant primer including 2mm thick wall care putty complete all as specified and as directed.

Material and labour for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.

Material and labour for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of old plastrered surfaces of ceiling applying one coats of white wash complete all as specified and as directed.

Material and labour for preparation of old plastrered surfaces of wall applying one coats of acrylic distemper complete all as specified and as directed.

Material and labour for complete scrapping of old decorated surface of wall and applying one coat of alkali resistant primer, sanding the surfaces till smooth finish is obtained and finally applying two coats of acrylic distemper including 2 mm thick wall care putty complete all as specified and as directed.

Material and labour for complete removal of existing treatment on walls or previously untreated surface and applying one coat of alkali resistant primer, sanding the surfaces till smooth finish is obtained and finally applying two coats of cement based paint etc complete all as specified and as directed.

Material and labour for preparation of old plastered surface of walls and applying one coat of cement base paint complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm including builders hardware each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.

Taking down shutter of any description,exceeding 1.00 Sqm but not exceeding 2.00 Sqm each complete all as specified and as directed.

Taking down shutter of any description n exc 1 Sqm each and refixing in same opening complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm but nexc 2 Sqm each and refixing in same opening each complete all as specified and as directed.

Dismantling timber scantling 40Sqcm and over in section in frame work in any position complete all as specified and as directed.

Material and labour for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

Material and labour second class hard wood in scantlings clean sawn timber in framed work complete all as specified and directed.

Material and labour for 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work in cup board complete all as specified and directed.

Material and labour for 2nd class hardwood weather boarding, for clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and directed.

Supply and fix pressed steel frames for doors of size 125 mm x 60 mm x 1.25 mm with double rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

Supply and fix pressed steel frames for doors of size 105 mm x 60 mm x 1.25 mm with single rebate including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

Supply and fix factory made steel window with side hung shutter including box type hinges with steel handle, steel peg stay, complete with glazing bar, dovetailed or welded complete all as specified and directed.

Supply and fix factory made steel window with side hung shutter including box type hinges with steel handle, steel peg stay, complete without glazing bar, dovetailed or welded complete all as specified and directed.

Supply and fix steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

Supply and fix mild steel Framed work such as grills, gratings, angle iron, mild steel sheets, mild steel round bar, MS flat iron etc.. for chowkhats or doors shutters or windows etc with ends of bars shouldered and/or riveted, wlded or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290. Gde-E-165 complete all as specified and directed.

Supply and fix 35 mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both side complete all as specified and as directed.

Supply and fix 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with out sash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and as directed.

Supply and fix Anodized aluminium sliding glazed window/Partation Wall shutter (double leaf glazed shutter and single leaf mosquito proof shutter each in single frame work) without sash bars with anodized aluminium shutter of section 40.00mmx20.00mmx1.10mm thick and window chowkat of section 92.00mmx29.50mmx1.20mm thick including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle, tower bolts and locking arrangement etc. and including 4mm thick sheet glass, tinted quality on panel and stainless steel wirecloth or aluminium anodized wire cloth for mosquito proofing, 0.45mm nominal dia and average width of aperture 1.40mm fixed with aluminium screws and tacks and making good to disturbed surfaces complete all as specified and as directed.

Supply and fix Anodized aluminium push pull type partly paneled and partly glazed door shutter (single leaf / double leaf) having top rail of section 85.00mmx44.45mmx2.00mm, bottom rail of section 85.00mmx44.45mmx2.00mm thick, door verticals of section 44.45mmx44.45mmx2.00mm thick and lock rail of section 85.00mmx44.45mmx2.00mm thick with aluminium anodized chowkats of section 63.50mmx33.10mmx2.50mm thick including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle and locking arrangement etc. including 12mm thick pre laminated particle board, interior grade pre laminated with decorative face laminations both sides on bottom panel and 5.5 mm thick float glass tinted quality on top panel and including aluminium door closer fixed to the door complete all as specified and as directed.

Supply and fix factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

Supply and fix factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specfication, drawing and complete all as specified and as directed.

Supply and fix butt hinges 100mm long extruded aluminium alloy with galvanised mild steel hinge pin anodised comp;ete all as directed.

Supply and fix 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed..

Supply and fix 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150 mm long extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

Supply and fix in repair aluminium door closer (Diecast) body hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and complete all as directed.

Supply and fix in repair brass locking arrangement with two levers of aproved make mortice lock for fixing to wooden/aluminum shutters complete all as specified and directed.

Material and labour in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

Supply and fix 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

Supply and fix in repairs, 25 mm dia stainless steel drapery rods for curtains incl stainless steel decorative end dooms and stainless steel brackets (wall to wall or flush to wall) for securing curtain rod,complete all as specified and as directed.

Supply and fix stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.

Supply and fix in repairs, stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

Material and labour for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

Material and labour for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of old painted wooden or wood based surfaces of any description n.exc 10 cm in width or girth when unconnected with other painting or when painted in a diferent tint and applying one coat of synthetic enamel paint complete all as specified and directed.

Hacking out old broken glass (any thickness, quality or description) from wooden/steel frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fix 3 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beading in square n exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix 3 mm thick figured glass, pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix 10mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required. Incl aluminium frame and locking arragement complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors/aprons laid bedded and pointed in any mortar

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour for coloured Non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.18 Sqm, in vertical surfaces such as skirting, dados and risers to steps etc over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles 450x300x7mm thick, set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps etc over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Material and labour for glazed virified tiles (GVT) 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor etc over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour for glazed virified tiles (GVT) 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surfaces such as skirting, dados and risers to steps etc over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Material and labour for heavy duty parking tiles 10 to 12 mm thick (quare/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or bedding layers in cement mortar (1:6) complete all as specified and directed

Material and labour pre-polished cement concrete chequered tiles area of each tiles 25x25x25 mm thick with white cement and pigments of approved maked jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6) complete all as specified and directed.

Material and labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment complete all as directed.

Material and labour for sand cushioning over sub base incl spreading and levelling in layers n exe 25 cm thick complete all as specified and directed

Supply and fix machine cut kota stone slab flooring 20-25mm th over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete over 20mm thick cement screed bed in CM 1:4 complete all as specified and directed.

Material and labour for granite work 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like with and including 15mm bedding in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc complete all as specified and directed.

Material and labour for cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc n. exc. 10 cm width or girth complete all as specified and as directed.

Supply and fix in repairs 20mm bore gun metal globe or gate valve cast copper alloy, screwed down, high pressure with cruth or butterfly handle screwed both ends for iron pipe or for union complete all as specified and as directed.

Supply and fix in repairs, bib taps, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter- fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix in repairs, 15 mm bore stop/angle valves, chromium plated, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repairs, 15mm bore dia of concealed stop valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repair, 125 mm, dia chromium plated, swivel type shower rose with 190 mm long chromium plated shower arm and wall flange suitable for fixing 15 mm bore iron pipe complete all as specified and as directed.

Supply and fix in repair, chromium plated tubular towel rail of 20mm dia and 60cm in length, D shaped, with brass chromium plated brackets complete all as specified and as directed.

Supply and fix in repair, soap dish chromium plated fixed to wall with chromium plated brass screws and plastic cleats complete all as specified and as directed

Supply and fix in repairs 600x150 mm glass shelf of fixed with and including chromium plated brass srcews and wooden plastic cleats (Minimum weight 300gm)

Supply and fix in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 940 mm x 460 mm bowl size 405 mm x 354 mm x 203 mm complete all as specified and as directed.

Supply and fix in repairs kitchen plate rack made of stainless steel sheet not less than 0.85 mm thick of over all size 610 mm x 914 mm x 254mm complete all as specified and as directed.

Supply and fix in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.

Supply and fix in repairs, PVC connections pipe15mm dia with PTMT nuts of length 450mm complete all as specified and as directed.

Supply and fix in repairs vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed.

Supply and fix in repair vitreous china wash down water closet (EWC) size 540x365x390mm pan (pedestal pattern) white, including seat cover, closed pattern with flat bottom and cover with chromium plated hinging device complete all as specified and directed.

Supply and fix in repairs, vitreous china squatting pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. (excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.

Supply and fix in repair 15mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as directed.

Taking up or down steel water tubing of 15 mm bore from trenches/wall,ceiling or floors including all fittings, segregated and stacking the pipe complete all as directed.

Taking up or down steel water tubing of 20mm bore from trenches/wall,ceiling or floors including all fittings, segregated and stacking the pipe complete all as directed.

Supply and fix GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply and fix GI tubing 20 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only 15 mm bore, GI tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only 20 mm bore, GI tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply and fix glass shelf of size 450x150mm size with CP guard rail below looking mirror etc complete all as specified and directed.

Supply and fix in repair chromium plated health houcet 1.20 Mr long flexible pipe complete all as specified and directed

Supply and fix in repairs, two way bib taps, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter- fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix in repair Vitreous China wash down one piece water closet pan (EWC) Italian collection (RENE Starwhite) of size 59cm x 36cm x 71cm,(pedestal pattern),complete series, white, including vitreous China flushing cistern (inbuilt with EWC) & plastic water closet seat white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device incl connection to drain (out going pipe) and to flushing pipe, antisyphonage pipe,etc complete all as specified and directed.

Supply and fix in repair rotational moulded polyethylene water storage tank 1000 litre capacity of triple layered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule all as specified and as directed

Supply and fix in repairs 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity n exc 500 ltrs all as specified and directed

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity exc 500 ltrs but not exc 1000 litrs all as specified and directed

Supply and fix in repair plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

Supply and fix in repairs, 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor as in waste/soil pipe complete all as specified and as directed. Note : Excavtion & Earth work to be include in quoted rate.

Supply and fix repair 110 mm dia PVC (SWR) bends of any radius complete all as specified and as directed

Supply and fix 110mm dia PVC (SWR) junction single, (single T) equal or unequal provided with access door complete all as specifiec and as directed.

Supply and fix in repair 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Supply and fix in repairs, 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor as in waste / soil pipe complete all as specified and as directed. Note : Excavtion & Earth work to be include in quoted rate.

Supply and fix 75mm dia PVC (SWR) bends of any radius with access door complete all as specified and directed

Supply and fix 75mm dia PVC (SWR) junction single, (single T) equal or unequal provided with access door complete all as specifiec and as directed.

Supply and fix mild steel framed work such as purlins, rafters angle iron, framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including taking down complete all as specified.

SANDIP BARUAH (BID ID -3357793)

M/S P&R CONSTRUCTIONS (BID ID -3358603)

M/s DAS AND CO (BID ID -3356329)

M/S K NATH AND CO. (BID ID -3358492)

PARAS ENTERPRISE (BID ID -3357038)