Providing joineries Electrification and painting to the new control room building of Kullanchavady 110KV SS at Kullanchavady

Amount

A) ELECTRICAL

Supply and fixing of MS Grills for windows as per design Specification etc,. Complete

White washing two coats with best quality of white cement and robin blue pigment over a primary coat for ceiling, exposed surfaces of wall, beam, slab, sunshade, lintel, etc.,including cost of all materials, lead, lift, etc., complete.

Colour washing two coats with EXTERIOR EMULSION paint over one coat of white cement primer for outside wall including cost of all materials, labour, lead, lift, etc., complete.

Colour washing two coats of approved INTERIOR EMULSION PAINT over one coat of white cement primer for wall including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing in position of anodised aluminiuum glazed door using door outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg / M with approved make as per the instruction of Engineer in-charge, floor gear rubber beedings, hinges, handle & 4mm thick Plain glass including cost of materials, labour, lead, lift, etc., complete door size 1.20 x 2.10 m single leaf.

Supplying and fixing in position of anodised aluminium partially glazed single leaf door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, automatic door closer etc, and with 12mm tk. one side laminated board at bottom half portion and top half portion with 4mm thick Plain glass including cost of all materials, lead, lift, etc, complete Single leaf door 1.00 x 2.10 m

Supplying and fixing in position of anodized aluminium glazed sliding window of size 1.20 x 1.35m as per ISS 1038-1958 (1245 ISS) using aluminium sections window frame bottom two track sliding 61.85 x 31.75 x 1.50mm @ 0.909 Kg / m, top & side 61.85 x 31.75 x 1.50mm @ 0.784 Kg / m shutter plain out side 40 x 18 x 1.55mm @ 0.547 Kg /m shutter inner lock 40 x 18 x 1.45 mm @ 0.607 Kg /m shutter runner top & bottom 40 x 18 x 1.55mm @ 0.547 Kg / m with glazing clips rubber gaskets sliding wheel & 4mm tk plain glass panelling including cost of all materials, locking arrangements labour, lead, lift, etc., complete.

Supplying and fixing of steel ventilator of 0.75x0.45 m fully glazed louver type as per standard specefication with MS angle 35 x 35 x 5 mm for frame and glass 4 mm thick including providing 12 mm dia bar including cost of all materials, lead, lifts, labour, etc., complete.

Supplying and fixing in position of PVC door shutter made of Single Pannel laminated Plastic section of size 200 x 20 mm and PVC extraced shutter frame of size 24 x 60 mm including cost of 3 nos 85 mm butt hinges for single leaf door of size 0.80 x 2.00 m with 2 No aluminium handle and 2 nos 150 x 2 mm aluminiam towel bolt hinges etc., complete.

Painting all the exposed faces of doors and windows cup board with an approved enamel paint over one coat of primary coat including cost of all materials, lead, lift, labour, etc, complete

Supplying and fixing of 1000 liters capacity ready made PVC Water Tank of ISI make with the required materilas etc., Copmlete

Providing PVC down fall pipe using 110mm dia 4 Kg / sqcm, PVC pipe and pvc clamp etc, including fixing PVC washer type door bend & shoe, in correct position and connecting from the roof slab including cost of all materials, labour, transport lead, lift, etc., complete, including PVC accessories and washers.

Providing and fixing sanitary fitting consisting of approved make as per the instruction of Engineer in-charge of oriya patten colour Water Closet 580mmx440m with P/S trap connecting with PVC ventilating shaft and Y bend complete, including cost of all material, labour, lead, lift, etc, complete.

Supplying and fixing CI.man hole cover of size for inlet and outlet manhole and building outside man hole cover for heavy duty including cost of all materials lead, lifts, labour etc., complete

0.45x0.45m CI Man hole cover

0.60 x0.60 m CI Man hole cover

Supplying and laying PVC pipe 110 mm outer dia 6kg/ cm2 ISI make for laying the sewer line including cost of pvc pipe coupling lbour for cutting laying fixing tighting etc including earth work excavation and refilling trench etc complete

Supplying and fixing of 110mm dia slotted pvc pipe for dispersion trench with covering with roof pantiles for covering the sides partly as per drawing including cost of all materials lead, lift etc. Complete.

Supplying and fixing 110mm dia PVC.Bend including cost of materials, labour lead lift, etc. Complete

Supplying and fixing 110mm dia PVC TEE including cost of materials, labour lead lift, etc. Complete

Supplying and fixing of 100mm dia PVC pipe, cowl for ventilating shaft., to a height of 10' length with proper B.W. with C.M.1:5mix plastering 12mm thick including cost of all materials, lead, lift etc. Complete.

Supplying and fixing in position of 25mm dia pvc pipe of 10 kg/sq.cm pressure from the approved manufacturer appolo, chemplast, avanplast, valamarthi, usha, vimal etc., confirming to IS 4985 of 1968, 4984 of 1970 including cost of all special fixtures labour lead, lift, etc., complete.

Supplying and fixing in position of 20mm dia pvc pipe of 10 kg/sq.cm pressure of approved make as per the instruction of Engineer in-charge confirming to IS 4985 of 1968, 4984 of 1970 including cost of all special fixtures labour lead, lift, etc., complete.

Supplying and fixing of 15mm high quality brass screw down bib cock of approved make as per the instruction of Engineer in-charge, cost of all materials, labour, lead, lift, etc., complete.

upplying and fixing inposition of GM gate valve best quality of approved make as per the instruction of Engineer in-charge including cost of all special fixtures lead, lift,etc., complete.

25 mm dia GM Gate valve / Ball valve

20 mm dia GM Gate valve / Ball value

Engraving the month and year of construction in the plinth beam projected border as per drawing and as per the instructions of site engineer (granite stone of size 300 x 200 mm.)

Supplying and fixing of colour wash basin of size 550 x 400 mm of approved make as per the instruction of Engineer in-charge including cost of wash basin with pedastal cock fixing using rag bolt and nut 15mm dia pvc connecting hose and outlet using 50mm dia pvc waste water pipe for outlet CP angle valve with all accessories including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing of best quality of mirror of size 600 x450mm mirror with soap tray, towel stand, screw and fixing near the wase basin, teak wood round block, including cost of all material, labour, lead, lift, etc, complete.

Supplying and fixing 100 x 50mm PVC floor trap in bath room with one pvc door bend shoe of 50mm.dia including cost of all etc., complete

Providing antitermite treatment in 4 stages i)immediately after EWE and before laying of foundation conc. ii) after refilling for sides of foundation iii) before laying of flooring conc. & outside of basement upto1 m alround the building using termit 250ml for 5 liters of water

Wiring with 2x1.50 sq.mm PVC unsheathed copper cable of 1100V grade in suitable pvc rigid pipe in wall or ceiling with pvc accessories with TW switch box in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour with contineous earthwire connection of 14 SWG T.C. wire for light points

Wiring with 2x1.50 sq.mm PVC unsheathed copper cable of 1100V grade in suitable pvc rigid pipe in wall or ceiling with pvc accessories with TW switch box in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour with contineous earthwire connection of 14 SWG T.C. wire for fan points

Wiring with 2x2.50 sq.mm Pvc unsheathed copper multistand cable of 650v grade in suitable pvc rigid pipe in wall or ceiling with pvc accessories with 150mmx100mmx75mm T.W.switch box in flush with wall covered with 3mm tk. Hylum sheet for 15 amps 3pin flush type non interlocking c.s. plug including pin top with painting of suitable colour with contineous earthwire connection of 14 swg t.c. wire for plug point.

Wiring with two pair copper telephone cable in suitable conduit pipe in wall and terminated with socket for telephone jack with TW switch box in flush with wall covered with hylum sheet of 3mm thick for telephone point

Supplying and fixing box type 4'-40w single flouresent fitting complete with copper choke and condenser 1 no 4'-40w tube with T.W. round block on wall or ceiling with pvc unsheated leads from terminals to the fittings

Supplying and fixing of suspension type twin fluorescent fitting with 2 Nos.4' 40W twin mirror optic suspension type fitting with copper choke and condenser enamaled reflaxiation with bulb

Supplying and fixing of 1400mm (54") sweep AC ceiling fan with regulator with 300mm down rod on the exisitng clamps of approved make including cost of all materials lead, lift etc., complete.

Supplying and fixing of 450 mm sweep AC Exhaust fan of approved ISI quality complete with necessary wall opening and making good of the wall

Supplying and fixing of water tight Bulk head fitting with guard of approved make as per the instruction of Engineer in-charge suitable for incondescent lamp with guard and 60 w bulp.

Supplying and fixing of MCB triple pole and nuetral link 35 to 63A capacity fitted with suitable flush board and 4 no. 16A/32 distribution MCB and provision for future including cost of all materials,labour, lead,lift, etc., complete

Providing PWD standard earthing as per standard specification complete with necessary masonry workincluding cost of 32mm dia GI B class pipeetc.complete

Supply and fixing 1 no 4 way Three phase and natural distribution board with insulator and 1 No.MCB of 6 amps each of standard company as approved by the engineer including cost of all materials, lead, lift, etc., complete.

Supplying and fixing of 23 cm angular holder with c glass with 40w bulb.

Fabrication and Labour charges for fixing of GI angles of various sizes vertically @ 75cm c/c to the required length for supporting the cable in the cable duct in correct position including labour ,cutting etc., complete as per the drawing and std.specification.

Supply and fixing of 3 Amps (3pin and 2 pin) combined flush type wall socket with switches concealed in suitable YW box covered with Hylem sheet in flush with wall earth connection (for computer plug socket )

Manufacturing and fixing of Name Board of size 2.00x1.20m using 35x35x5mm MS angle as outer frame 35x5mm MS flate as stiffness, 2Nos vertical and one number horizontal 100x50mm Ms channalas support for 3.60m height for fixing of board with proper anchoring and using 18 SWG MS sheet for name board and painting the name board with one coat of red oxide primer and two coatss of approved enamal paint including cost of all materials labour for painting emblem lettering and all lead lifts etc complete

Flooring with approved spartex ceramic of non slippery type tiles over cement mortar 1:3,12mm thick including pointing with white cement finishing the joints, flush pointing the surface including cost of all materials labour lead lifts etc., complete.

Flooring with approved spartex ceramic of anti skid tiles of approved size and standard company Jonson,Regency etc over cement mortar 1:3,12mm thick including pointing with white cement finishing the joints, flush pointing the surface etc., complete.

Flooring with approved spartex ceramic of acid proof tiles of approved size and standard company Jonson,Regency etc over cement mortar 1:3,12mm thick including pointing with white cement finishing the joints, flush pointing the surface etc., complete.

Supplying and providing wall Acid proof tiles of best approved quality of make johnson, regency etc., over CM 1:3, 12mm thick and pointing with the same colour cement including cost of all materials, labour, lead, lift, etc., complete.

Dadooing with glazed tiles of best approved quality as per the instruction of Engineer in-charge, over CM 1:3, 12mm thick including cost of all materials, labour, lead, lift, etc., complete.

Terrace Flooring with 3 to 10mm Chips( Ellis Pattern I Sort) including cost of all materilas ,labour ,lift curing etc..complete

Terrace floor plastering with CM 1:4 12mm thick mixed with water proof compound for laying the tiles for including cost of all materials labour charges,lead and lift etc.,

Supplying & Fixing of one coarse of cooling tiles of size 30.48cmX30.48cmX1.27cm & Jointing to be property packed with grouting material with tilemate with additive liquid laid in the roof including cost of all material,lead,lift etc complete

Supplying & fixing in position of chequrred plates in the cable duct trench including all cost labour,lead, lift.etc.., complete

K Rajkumar