ADDN / ALTN AND UPGRADATION OF INFRA AND FURNITURE IN LH-240 AT MP BLOCK AND ADDN/ ALTN TO MATHEMATICS DEPT (LH-64 ) INTO COMPUTER LAB FOR SUDAN BLOCK, AT NDA KHADAKWASLA

Amount

Dismantling of floor, hearth or wall tilinng incl cement mortar bedding (but not backing) and rubbish off including rubbish off outside of MOD land complete all as specified and as directed.

Material and labour for coloured joint free homogeneous glazed dark shade full body vitrified tiles as per IS 15622: 201, water absorption <0.05%, MOH hardness > 6, breaking strength >1500, high abrasion and stain resistant PEI III-V (Gloss PEI II-III) dark shade 9-10 mm thick (square/ rectangular) area of each tiles exceeding 0.70 sqm but not exceeding 1.00 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with spacer 3-5 mm thick and grouting with epoxy grout including wastage on tiles i.e. raking, circular cutting or notching etc over 20mm thick screed bed in CM 1:4 etc complete all as specified and as directed. Note: Curve floor surface hence no extra measurement to be given to the contractor for wastage.

M&L for Glazed dark shade full body Vitrified tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.70 sqm but not exceeding 1.00 sqm, in skirting / wall tile etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with Raking, cutting and waste on glazed tiles over 10mm thick backing coat in CM (1:3) complete all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid beded & pointed any type of morter complete all as specified and as directed

M&L for 16 to 18 mm thick granite (of any type any colour) work (table rubbed 7 polished ) in window door cills/jambs, platform like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed with granite etc complete all as specified and directed

Demolition of precast concrete block walling and similar items ie. ashlar facing dressed stone work, precast concrete articles etc.,of any discription and in any position, built in cement mortar, including all quoins, arches and pillars etc. complete all as specified and directed

M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) type C1 (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 Modular bricks etc ccomplete all as specified and as directed.

M&L rendering 10 mm thick in CM 1:4 finising even & smooth without using extra cement on fair faces of brickwork or concrete surfaces complete all as specified and as directed.

Supply and fix powder coated (wooden finished colour) aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, chromium plated brass/ stainless steel screws complete as per architectural drawings complete all as specified and as directed

Supply and fix 4mm thick sheet glass / glass strip area exc. 0.5 sqm in each pane ordinary quality and glazing fixed to aluminium and wooden window / ventilator shutters / steel windows with glazing cllips and putty etc complete all as specified and as directed

Supply and fix 4mm thick frosted sheet glass / glass strip area n.exc. 0.5 sqm ordinary quality and glazing fixed to aluminium and wooden window / ventilator shutters / steel windows with glazing cllips and putty etc complete all as specified and as directed

S&F, Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturs complete all as specified & directed

Dismentling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, alu partation any thickness, including cover fillets complete all as specified and as directed

M&L for Poly Vinyl Chloride (PVC) false ceiling panel of size 1'x10' long 7 to 8 mm thick with GI channel and concelled fixing arrangements to roof including necessary fixing arrangements complete all as specified and as directed. Make :- Adom /MDG/Galaxy Note :- (i) Boarder ceiling of 12' - 15' will be provided bellow main ceiling both main and down border ceiling will be paid under same item. (ii) Shade /colour of false ceiling as approved

S&F in repairs 2nd class hardwood Plain/moulded fillets. square, rectangular or triangular in section , clean sawn, secured with nails or brads fixed in repairs.exc 3 sq cm & n exc 6 sqcm complete all as specified and as directed

S&F in repairs 2nd class hardwood Plain/ moulded fillets. square,rectangular or triangular in section , clean sawn, secured with nails or brads fixed in repairs.exc 6 sq cm & n exc 13 sqcm complete all as specified and as directed

M&L for 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work complete all as specified and as directed

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of fill the gap with wood filler or putty(Fill-O-dent) etc and apply o two or more coats of fench polishing above seal coat on new wood work till desired finish is obtained complete all as specified and as directed

Dismantling timber scantling 40 Sqcm and over in section and at any position as in unframed work complete all as specified and as directed

M/L for IInd class hard wood in scantling exc 40 Scm in area clean sawn for unframed work complete all as specified and as directed

Material and labour for providing and fixing stainless steel (Grade 304), for trades beading equal angle type, ornamental railing and frame work for moduler kitchen made of hollow tubes, channels, plates etc., including laser cutting, welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including laser cutting and fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts, fasterners with min 100 mm deep on concrete etc., of required size, on the top of floor or the side of waist slab with suitable arrangement etc complete all as specified and as directed

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed

M&L for PCC 1:1.5:3 type A1 (using 20mm size grade stone aggregates) as in sub base of flooring and mass concrete etc complete all as specified and as directed.

M&L for Formwork to faces of flat rough finfished surfaces of concrete walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc. vertical or to batter etc complete all as specified and as directed

M&L for complete removal of existing treatment from wall to make the surface free from dust, loose paint and loose plaster by scrapping manually / mechanically as directed by engr-in-charge (nails, screws if any to be removed properly before scraping) complete all as specified and directed.

All as per item No 26 above but for Ceiling surface complete all as specified and as directed.

M&L for providing and applying water proof cement base putty of 1mm thick over prepared old plastered / old painted wall surface to prepare the surface even and smooth upto desired finishes by manually / mechanical means etc complete all as specified and directed.

All as per item No 28 above but for Ceiling surface complete all as specified and as directed.

M&L for one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied on wall with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and directed.

All as per item No 30 above but for Ceiling surface complete all as specified and as directed.

Material and labour for preparing of old surface and applying two coats of 100% premium acrylic emulsion water base luster paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sq.m over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sq.m over new surfaces complete all as specified and as directed. NOTE :- All painting work, distempering, cement based paint and luster paint catered in this BOQ shall be executed at site by authorised applicators of the paint manufacturing companies specified in Appendix 'C'

All as per item No 32 above but for Ceiling surface complete all as specified and as directed.

S&F rolling Venition blinds with design on inner face verticle type made out of fibre cloth fixed, to wall with necessary aluminium brackets, screws etc including aluminium frame for venilion blinds etc all as approved complete all as specified and directed. Note: design as approved.

S&F in reairs brass mortice lock,100mm , 4 liver verticle type complete all as specified and as directed

S&F in repairs extruded brass plate handle, fabricated type polished bright, 175mm long of shape complete all as specified and as directed

S&F in repairs decorative type Brass, sliding door bolt 300mm long with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed etc all as specified and as directed.

S&F Stain less steel sheet alphabet of height 200 mm to 300mm, width 50mm depth min 40 mm , fixed with min 02 brass screw on board etc complete all as specified and as directed.

M&L for preparation/cleaning of POP art work with vaccum cleaner and one coat oil bound distemper over the art work etc complete all as specified and as directed

Dismantling framed work timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 Sq. cm in section at any position complete all as specified and as directed.

Taking out old serviceable glass of any description, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size; hacking out old putty or removing beads etc, including making good breakages in taking out and handling removing to store or stacking for reuse complete all as specified and as directed

M&L for Full body Glazed Vitrified tiles light/dark shade 8-10mm thick (square /rectangular) polished, area of each tiles exceeding 0.80 Sqm but not exceeding 1.30 Sqm, in floor, etc, jointed and pointed in white or coloured cement to match the colour of tiles with screed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed

M&L for Full body Glazed Vitrified tiles light/dark shade 8-10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm on vertical surfaces, set & joined in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including backing coat of 10mm thick such as skirting, dados and rises to steps in Roff Vitro adhesive by Pidilite or equivalent complete all as specified and as directed

M&L 25mm thick board 1st class hardwood, planed one side & edges tongued and grooved or rebated, fixed with nails supplied and fixed complete all as specified and directed

M&L for complete removal of existing treatment, with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler or putty (Fill-O-Dent) etc by removing latches / sliding door bolt and refixing the same in the door and apply one or more coats of french polishing above the seal coat till the desired finish is obtained complete all as specified and as directed.

M&L preparing wooden surfaces of any description, over 10cm in width or girth and applying by spray gun with finishing one coat of Woodkeeper 1 K PU by Berger or equivalent complete all as specified and directed.

M&L preparation of old wall surface and applying two coats of distemper oil emulsion white or tinted complete all as specified and as directed.

M&L preparation of old ceiling surface and applying two coats of distemper oil emulsion white or tinted complete all as specified and as directed.

S&F in repairs antique / ornamental Brass hevy duty Hinges, Aldrop, tower bolt, handles, latches, window/door stopper, sliding door bolt etc match to existing for doors, windows, ventilators & banister all as specified and as directed by Engr-in-Charge. Make : M/S J Errana, Shri Laxmi Industries (P) Ltd, Classic or equivalent.

S&F, Powder coated (minimum thickness of powder coating 50 mm micron) aluminium frame & shutter for door, window and ventilator including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, hinges, tower bolt, etc complete all as specified & directed . Note :- Floor door spring & sheet glass shall be measured and paid seperately.

S&F Aluminium (Die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed.

S&F 5.5 mm thick sheet glass, ordinary quality and glazing in squares not exceeding 0.5 Sqm in each pane complete all as specified & directed .

S&F 5.5 mm thick sheet glass, ordinary quality and glazing in squares exceeding 0.5 Sqm in each pane complete all as specified & directed .

S&F SS Butt hinges, heavy weight, cold rolled, mild steel length of hinges 125mm etc all as specified and as directed.

S&F SS Butt hinges, heavy weight, cold rolled, mild steel length of hinges 75mm etc all as specified and as directed.

S&F stainless steel wiremesh 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beads complete as specified and directed .

M&L for 12 mm thick veneered decorative plywood, grade-I (with BWR resin) with decorative face veneers on one faces; fixed with srews to timber frame work.

M&L moulding 1st Class hard wood as in Cornices exc 6 and not exc 13 Sq Cm complete all as specified and directed.

Supply, install, commissioning & testing of Cassette AC units indoor/outdoor complete with cordless remote control unit and with in built air ioniser invertor type compressor, 100% copper tubing of Indoor & Outdoor cooling & condenser unit respectively with CFC free gas for better indoor air quality with 5 star rating and EER 3.2 of capacity 4.0 TR single phase including cabling work, insulation between indoor unit to outdoor unit or making resting platform of outdoor unit by brick works complete all as specified and directed. Note: MS suspended brackets required for installation of AC shall deemed to be included in quoted rate Make : O Genral/Carrier/Daikin/Hitachi/Blue Star.

S & F voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 110 V to 290 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 10 KVA complete all as specified and directed. Make : V-Guard/ Vinitec/ Microtek.

M&L for sub main wiring 2 x 6.0 Sqmm for phase and neural, 1 x 6.0 Sqmm for earth wire PVC insulated (heavy duty) 1100 volts grade, FRLSH, with single core copper conductor in & including PVC conduit of suitable size not less than 25mm complete all as specified and directed (from distribution board to metal clad switch socket point near AC) Note: 2 run of 6.0 Sqmm cable and one run of 6 sqmm as earth wire alongwith PVC conduit will be measured as one RM

S & F sheet metal enclosures single pole and neutral enclosure with a two pin and earth plug and socket complete with one MCB SPN 20 Amps, complete all as specified and as directed.

M&L for high thermal conductivity and corrosion resistant Copper Tube of size 3/8 inch (10mm) with nitrile rubber insulation including all fittings and fixing accesssories used in extended length complete all as specified and directed.

M&L for high thermal conductivity and corrosion resistant Copper Tube of size 5/8 inch (16mm) with nitrile rubber insulation including all fittings and fixing accesssories used in extended length complete all as specified and directed.

M&L for PVC pipe 32 mm dia heavy duty with all fittings and fixing accesssories such as coupler, lock nut, saddle, pipe hook and laid on floor (for drain line) complete all specified and directed.

M & L for making holes by core cutting machine on stone/concrete / brick walls.Dia of hole not exc.50mm and thickness of wall 50cm to 70cm for entry of suction and discharge pipes of AC and making good distarbed surfaces with cement morted and finally finished with plaster of paris and painted the distrubed surfaces with existing type of paint and tint complete all as specified and directed

Taking down exiting copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed

M&L for concealed point wiring in and including new PVC conduit medium grade with the help of multi-stranded unsheathed FRLSH copper cable 1.5 sqmm 650/1100V conforming IS:3419 -1988 adhereing to colour code including earth wire of the size 2.5 Sqmm green colored with modular steel or cast iron terminal boxes and modular cover plates as required at site including making good the distrubed surfaces and matching it with existing surface for the following :- (a) One light/Fan point controlled by one way switch 6 Amps 240 volts

(b) One 3 pin socket outlet, 5 Amps, independent board

(c) One 3 pin socket outlet, 5 Amps, same board

(d) M&L concealed point wiring for One 3 pin socket outlet, 5 Amps with 2.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unseathed cable in and including PVC conduit not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 2.5 sq mm copper conductor as earth wire to common earth dolly complete all as specified and directed

S&F in replacement modular switch 1 way 10 A 1 module complete all as specified and directed.

S & F in replacement modular Socket, 6A - 2/3 pin,2 module complete all as specified and directed

S&F in replacement modular switch 1 way 16 A 1 module complete all as specified and directed.

S&Fin replacement Modular socket 6 A/16A 2/3 Pin 2 module complete all as specified and directed.

S&F modular BLDC fan regulator, 2 module, suitable for ceiling fan of 1200/1400mm sweep complete all as specified and directed

S&F in replacement of Modular Blank Plate1 module complete all as specified and directed

S&Fin replacement of ceiling rose, 3 terminals /PVC/Polycarbonate, isolated body complete all as specified and directed.

S&F in repairs Decorative wall mounting with different finishes with borosil glass frosted & soda glass with 7.5 W A60 LED Lamp(Green/Red) with E27 base. all as specified and directed . Havells- LHFHBDDBTB1M007 or techno-commercially equivalent make as mentioned at list of makes in PS

S&F in repairs Surface mounted LED Panel lights size of 2ftx2ft 40 W LED 4000K, 240Volts and glare free symmetrical illumination suitable for ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully all as specified and directed. Note: The quoted price shall include the cost of Light and its driver.

S&F in repairs Recess mounted LED round desing in white PDC aluminium housing 15 W LED 4000K, 240Volts and glare free symmetrical illumination suitable for ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully all as specified and directed. Note: The quoted price shall include the cost of Light and its driver.

S&F in repairs Flexiible LED strips with optimum brightness & uniformity of light for perfect cove lighting 24V/2A linear flex ( profile light) of 5 RM including drivers of warmwhite/Blue colour with aluminium profile with accessories including mounting on the ceiling/wall as reqd at the site complete all as specified and directed . Havells- FLEXISTRIP5MIP2024V/2ALED830MOD V1 or techno-commercially equivalent make as mentioned at list of makes in PS

Supply and Fix in replacement of Ceiling Fans 1200mm Sweep size, BLDC Motor,100% copper winding 5star BEE 230V,single phase AC 50Hz wattage upto 28W(+/-15%) rated power,350RPM(+/-10%) with suitable step regulator operated for speed control, air delivery of 215m3/min 03 number of blades including cutting of existing false ceiling of any tye make good as per existing after fixing of fan rod as per site requirement with nut bolts,wires,white cover plate and suitable connections and also self adhesive printed sticker of vinyl sheet and of size 8 X 3 cm written letter GE (M) Khadakwasla & FMR No all as specified and directed . Note: Old fan should be deposited in MES Store.

S & F Anchor Bolt on the RCC roof Drill holes at the marked locations using a masonry drill bit. Ensure the holes are deep enough to accommodate the entire length of the anchor bolts.Place the mounting bracket over the anchor bolts and secure it by tightening the nuts with a wrench. Ensure the bracket is firmly attached and level.Ensure all connections are secure and the fan is stable complete all as specified and directed.

M&L for repalcing the down rod of ceiling fans up to 5 feet GI ceiling fan hanging down rod with necessary clamp accessories complete all as specified and directed

S&F in replacement of high speed wall mounted fan of sweep 400 mm,,Full copper motor,auto thermal overload protection,compact style and powder coated gurads & pull cord switch for speed regulation and oscillation control including connectng up the power cord to the socket and necessary fixing accessories all as specified and directed. Note: Old U/s fan dismantled from site and deposited at MES store Yard.

M&L for Provn of PVC conduit for Telephone/TV/LAN/CCTV not less than 25 mm with Cutting chases for concealed conduit wiring, pinning in and making good to surface where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., cutting not exc 10 cm girth including 3 mm thick wall care putty on wall, making surface matching to adjacent surface all as specified and directed.

M&L for Cutting chases for concealed conduit submain wiring, pinning in and making good to surface where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., cutting not exc 10 cm girth including 3 mm thick wall care putty on wall, making surface matching to adjacent surface all as specified and directed.

Taking down exiting copper/aluminium sub main wiring complete for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc as directed .

M&L for concealed sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 1.5 Sqmm , 1100 Volts grade in and including PVC conduit medium grade with all fitting & other accessories and copper cable 1.5 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 1.5 Sqmm cable with 01run of 1.5 Sqmm earth wire along with PVC conduit medium grade shall be measured as one RM

M&L for concealed sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 2.5 Sqmm , 1100 Volts grade in and including PVC conduit medium grade with all fitting & other accessories and copper cable 2.5 sqmm continuous earth wire complete all as specified and directed . Note: Two runs of 2.5 Sqmm cable with 01run of 2.5 Sqmm earth wire along with PVC conduit medium grade shall be measured as one RM

M&L for concealed sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including PVC conduit medium grade with all fitting & other accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed . Note: Two runs of 04 Sqmm cable with 01run of 4 Sqmm earth wire along with PVC conduit medium grade shall be measured as one RM

M&L for sub main wiring with Four single core PVC insulated FRLS cables with stranded copper conductors 10 Sqmm , 1100 Volts grade in and including PVC Casing capping with all fitting & other accessories and copper cable 10 sqmm continuous earth wire complete all as specified and directed . Note: Four runs of 10 Sqmm cable with 01run of 10 Sqmm earth wire along with PVC conduit medium grade shall be measured as one RM

S&F in replacement factory made epoxy powder coated Distribution Board TP&N 04 way double door (VTPN MCCB DB ) MCCB as In comer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishes complete all as specified and directed Note:MCBs/ MCCBs will be measured and paid seperately under respective of Sch A item in the schedule

S&F in replacement MCB DB 12 way SPN Double door sheet metal enclosure factory made suitable for MCB DB's 240 volts,concealed in wall complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site complete all as specified and directed . Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced.

S&F in repairs MCCB with rating of 100 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals complete all as specified and directed.

S&F in repairs MCB SP 6 to 32 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing complete all as specified and directed

S&F in repairs MCB SPN 40 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing complete all as specified and directed.

M&L Earthing complete with galvanised iron earth plate electrode 600 x 600 x 6mm as earthing lead buried directly in ground vertically to depth not less than 2.25 mtr below GL with the top edge of the plate not less than 1.5 mtr from GL, connected to GI earth lead of 4.0mm dia, by means of bolts & nuts, to GI and connected to earthing test point all as shown in elecrical plate No. 3 of SSR Part-I of 2009* specified or indicated and testing on completion including excavation / earth work in any type of starta, PCC (1:3:6) type C1 earthing chamber pre cast slab 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric (XPM) weight not less than 4 KG/sqm cast iron frame, funnel with wire mesh GI watering pipe of 20 mm bore medium grade and lugs with and including GI earth wire 4 mm dia with GI protection pipe of 15 mm medium grade 7.5 meter long etc complete tested on completion all as specified and directed. Note: a). Rate quoted shall deemed to include cost of excavation in any type of strata, RFR and removal upto 50metre, PCC pit, funnel and RCC cover plate. b). GI wire above 7.5m will be measured and paid seperately.

M&L in replacement of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed

S&F sheet metal enclosures single pole MCB 20 Amps with a two pin and earth plug and socket complete with all accessaries etc all as specified and directed. Note: Quoted cost includes 20 Amps MCB also

S&F MCB TP 63 Amps 240 V, 10KA breaking capacity, C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specifiied including complete connection with copper/ aluminium cable lugs with suitable sixe for incoming and outgoing complete all as specified and direcetd

Sunil Constructions (BID ID -3383965)

Bharekar Construction (BID ID -3383527)

DARSHAN ENTERPRISES (BID ID -3383292)