REPAIR MAINT TO HARD STANDING INTERLOCKING TILES PATH CHAIN LINK FENCING CULVERT SAUCER DRAIN AND JAFFRY WALL OF ZONE B AREA AT GMS UNDER GE I GOS

Amount

Dismantling fencing wire mesh, any type complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc not exceeding 10 Sqm on plan and in any type of soil etc complete all as specified and directed

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L Brick work using fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Form work to sides of concrete foundations, footings, sides and soffits of foundation and plinth beams, columns and similar work vertical or batter rough finished surface of concrete of that surfacescomplete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges including necessary form work complete all as specified and directed.

S&F Mild steel square/rectangular Hallow sections/ flats in posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc flat iron fillets (for securing wire mesh etc) incl all necessary drilling, blocking or reveting etc complete all as specified and directed.

S & F 4mm dia PVC Coated chain link Fencing of Size 150 x 100mm mesh, made up into matresses or cages,lapped, wired and laid in position, including closing after filling complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and 'scraved the other to be fitted with washers and one hexagonal or square nut n.exc 5 cm long and dia 5 to 10 mm complete all as specified and directed.

M&L, MS round bars 10 mm dia and over cut to length, bent to shape reqd incl cranking bending etc and binding with MS wire (annealed) not less than 0.9 mm dia as in chain link fencing fixing complete all as specified and directed.

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 is to be finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of surfaces and applying two coats of cement base paint on fencing post, complete all as specified and directed by EIC.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, not exc 10cm in width or girth when unconnected with other painting and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F in repair galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm barbs at 100mm spacing complete all as specified and directed.

Returning and filling in incl, spreading, levelling watering and well ramming in layers n.exc 25 cm complete all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removal of rubbish from site complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed

M&L for providing precast cement concrete louvres and jallies 35 mm thick (measured solid) including all mouldings but excluding frame in cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates and set in cement mortar 1:4 complete all as specified and directed.

Mild steel bars TMT 10mm and over, cut to length bend to shape required incl cranking bending and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L precast RCC 1:2:4 type B1 using 20mm graded stone agg in cover slabs set in cement mortar 1:6 including all necessary form work complete all as specified and directed.(Note : Reinforcement shall be measured and paid separately).

M&L for 15mm thick rendering on fair faces of brick work or concrete surface of wall in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

M&L for walling of random rubble uncoursed stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed.

All as per item No 28 above but except stone

Hammer dressing to RR masonry wall (granite basalt/trap stone) uncoursed with maximum depresion of 40 mm from straight edge held against the surface complete (for area to be pointed) complete all as specified and directed.

M&L for keyed pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

M & L Cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggreates 100 mm thick as in flooring finished even and fair complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregates as in hard standing 100 mm thick laid in panels and finished even and smooth without using extra cement and spike rolling to surfaces or making impression of expanded metal whilst the concrete surface is green complete all as specified and directed.

M & L for Screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L chequered cement concrete tiles 20 cm X 20 cm X 25 mm thick, set , jointed and pointed in neat cement surry in floors with pigments complete all as specified and directed.

M&L 50 mm thick Sand cushning below interlocking paver tile complete all as specified and directed.

Machine pressed precast concrete interlocking paver block any shape and size fixing with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 75 mm thick surface finished even and rough to receive the topping layer without using extra cement complete all as specified and directed.

M&L for Machine cut kota stone slab flooring mirror finished 20-25 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 20 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed.

Dismantling of AC corrugated / semi corrugated sheet as in roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Excavation in any type of soil for post holes (or similar holes) each not exceeding 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and directed.

S&F rolled mild steel section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connected plates of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F vitreous china wash down water closed white/colour cascade EWC incl necessary fitting seat cover inbuilt flushing cistern complete all as specified and directed. (Make Jaquar or Equivalent of higher cost).

S&F table top WHB cascad oval counter top WHB coloured 550 x 490mm complete all as specified and directed. (make PARRYWARE,Hindware or equivalent of higher cost.

S&F cornner glass shelf of size 9"*9" shelf and frond,circle in design fixed over chromium plated brackets of heavy duty with frond linings with glass fixed in wall with necessary screws complete all as specified and directed. (Make: Jaquar or equivalent of higher cost.

S&F CP Wall mixture complete all as specified and directed. (Make : Jaquar Code No 5821N or equivalent of hihger cost.

Use and waste of form work to soffits of supended slabs such as roof slabs, floor slabs, landings and similar works n.exc 200mm thick (Horizonal or slopping) for rough finished surface of concrete complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type B0 1:2:4 (12.5mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

M&L for MS TMT bars, 5mm dia and over upto and incl 10 mm dia in spacers, stirrups and binders , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410-W or Fe 290 (as in rungs/handles). complete all as specified and directed

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like 15mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Supply and fixing stainless steel of higher grade as in staircase railing/gate of approved pattern using hollow sections, fixing with adequate support from bottom and side walls, making good the holes with PCC 1:2:4 including necessary fabrication, finishing the joints etc complete all as specified and directed.

M&L for preparation of old distempered surfaces of wall including cornices etc and applying one coat of acrylic distemper complete all as specified and directed.

M&L for anti-skid Designer tread/riser and landing tiles for steps of 10mm thick with self-embossed grooves set and jointed in neat cement slurry including 10mm thick screed bed of CM 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and smooth without using extra cement to receive the topping layer complete all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectagular) dark colour shade polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors over 20mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 62 above but on vertical surface of wall of size not exceeding 0.36 sqm,as in dado/skitting including 10 mm thick rendering in CM 1:4 complete all as specified and directed

M&L heavy duty exterior tiles 30 cm X 30 cm X 10 mm thick, set , jointed and pointed in neat cement surry in floors with pigments complete all as specified and directed

V.Venkata Ramaiah

MM ENGINEERING SYSTEMS

M/s Bapujee Builders and Traders

M/s Ats Electricals

M/s MAA BHAIRABI ENTERPRISES

ABC CONSTRUCTION COMPANY

HARAGOURI SUPPLIERS