EOI/01

Amount

Dismantiling, stacking (within 100 m) Flash Mixer from position and supplying & installation of Flash Mixer paddle of impeller dia. 750 mm shaft dia. 63 mm of S.S. 304 X 3400 mm below top water level 8 Nos SS 304 Grade 150 x 125 x 6 mm thick two stages including SS 304 guide brush bush with MS Rubber line holding channel , motor , gear with bearing housing including bottom support of MS rubber line channel with SS 304 bush bearing each consisting of 7.5 HP motor , rpm 1500 with suitable worm type reduction gear 15 : 1 to be coupled with motor including all electrical accessories all complete as per specifications and direction of EIC

Dismantling stacking (within 100 mtr) of cast iron gate and supplying hoisting alingning and erecting in position with necessary support / tagging with tools & tackles cast iron single phase sluice gate for open channel installation of CI Door and guide channel brass sealing surface on eighter side flush button sealing of bottom between cast iron door and nitrile rubber operated by an ungreared head stock including two coats of bituminastic paint as per specifications and directions of EIC (test certificate and gaurantee for the equipments)

1200 mm x 1200 mm size

800 mm x 800 mm size

Dismantling, stacking (within 100 m.) outlet-Controller from position which may required and supplying, fitting, foding double entry outlet contrailer/rate settler having 350 mm dia. for entry from either side with CI. flange having slow start gear, FRP float, rising gear, float stand, drain plug, repairing of 150 mm gun metal drain out by pass valve (Mush room type) coupled with spindle head stock, wheel, G.M. Bush with support as per direction

Dismantling, stacking (within 100 m. ) of existing equipment in respect of ROF & LOH Gauges and supplying, fitting, foxing of capacitance type ROH and LOH gauges to each filter unit containing two beds including cable connection to Console (for pneumatic operation) as per direction of EIC

Dismantling and repairing of Control Console to receive signal and display digitally Rate of flow (ROF) and Head of loss (LOH) of each filter unit including all cable connection and other necessary lamp connection as per direction of EXC

Dismantling, stacking (within 100 m.) of existing cover of inspection chamber and supplying Galvanized inspection chamber cover with transparent window, lift hook of 55 round ring/bar etc. hoisting, aligning & erecting in position with necessary support as to be required all complete as per direction of EIC

Thorough Repairing of wall mounted vacuum chiorinator with the provision of auto change over system capable of dosing chlorine at a rate of 30 kg/hr. at a back pressure of 2 kg/sq. cm. with automatic change over type vacuum regulator, venture Injector, and all other necessary accessories to inject optimum chlorine gas as per direction of EIC

Through repairing of electrically driven agitator set made of stainless steel 55 316 paddle and shaft supported with bearing housing, extension of shaft, as necessary upto 250 mm, coupled with suitable reduction gear and motor of 5 HP rating having 25 to 30 output RPM including D.O.L starter etc. In the Alum solution tank as per direction of EIC.

For Alum solution Discharge capacity 1500 LPH, pressure-1 kg/ sq.cm. Rating of Motor-2 HP, RPM-1440,

RAMASISH ENTERPRISE

Tarun Kumar Bhattacharya