REPAIR TO PLASTERING, TILING, FLOORING AND JOINERY WORK INCLUDING MISC REPAIR WORKS IN THE AREA OF AGE B/R-III UNDER GE (W) JABALPUR

Amount

Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) including removing of debries/waste material outside MD land at any distance from site complete all as specified and as directed.

Dismantaling floor hearth or wall tiling/china moisac including cement mortar bedding (but not backing ) , removing serviceable tiles to store and including removing of debries/waste material outside MD land at any distance from site complete all as specified and as directed.

Taking down cement plaster / terrazzo of any description thickness including raking out joints hacking for key scrubbing down with water including removing of debries/waste material outside MD land at any distance from site complete all as specified and as directed.

M&L for 10mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and directed.

M&L for 15mm thick rendering on concrete/brick surfaces in CM 1:4 using with water proofing compound as per manufactures instructions finished even and smooth without ung extra cement complete all as specified and as directed. ( Note: WPC measured and paid saperately)

M&L for 5mm thick rendering in Cement Mortar 1:3 on fair faces Concrete Surfaces of ceiling finished Even and Smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfacces and applying three coats of white wash as in ceilling complete all as specified and as directed.

M&L for Preparing Newly Plastered Surfaces of internal wall and applying two Coats of oil emulon distemper over and including 3 mm thick wall care putty on wall plastered surface over a coat of chalk whitening primer complete all as specified and as directed.

M&L for Preparing Newly Plastered Surfaces of external Walls and applying Two Coats of Cement Base Paint over a coat of primer complete all as as specified and as directed.

Supply only liquid Water proofing compound complete all as as specified and as directed.

M&L for 100 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base flooring complete all as specified and as directed

M&L for 25 mm thick cement concrete Type B0 1:2:4 (Using 12.5mm graded aggregate) as in flooring, surfaces fair and even complete all as specified and as directed.

M&L for vItrified ceremic tiles 7 to 8mm thick, in LIGHT shade/colour, (Square/rectangular) polished, area of Each tile not exceeding 0.36 Sqm as in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and directed.

M&L for Vitriefied ceramic tiles 7 to 8mm thick LIGHT SHADE(square/rectangular) polished area of Each tiles not exceeding 0.36 Sqm as in vertical surfaces such as dados/skirting etc set and jointed in neat cement slury and in coloured cement to match incl plaster (backing coat) 10mm thick in CM 1:4 complete all as specified and as directed.

M&L Non skid coloured ceramic tiles 7 to 8mm thick square/ rectangular area of Each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15 mm thick screed bed or beddding layer in cement mortar 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and as directed.

M&L Non skid coloured ceramic tiles 7 to 8mm thick square/ rectangular area of Each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including incl plaster (backing coat) 10 mm thick in CM 1:4 complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of Each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed..

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of Each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, as in skirting ,dados in vertical surfaces etc and including 10mm thick cement plaster 1:4 complete all as specified and directed.

M&L for rubber moulded cement concrete tiles for parking outdoor tiles 30 cm x 30 cm x 10 mm thick, jointed and pointed in neat cement slurry as in floors etc incl 20 mm thick cement screed bed in CM 1:4 complete all as specified and directed..

Material and labour 20-25 mm thick machine cut kota stone flooring laid and jointed with neat cement slurry mixed with pigment to match the shade of the slab laid over 20 mm thick bedding layer in cement mortar 1:6 including rubbing and polishing complete all as specified and as directed.

M&L 18 to 20 mm thick machine cut kota stone as in vertical surfaces risers of steps , skirting, dado and pillars etc set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the colour of stone slab laid over and including 10 mm thick rendering in cement mortar 1:4 including rubbing and mirror polishing complete all as specified and as directed.

M&L for Granite (of any type ) 18 to 20 mm thick work (table rubbed and polished ) as in steps ,jambs,pilllars,window cill,cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Granite laid over 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C1 using 20mm graded aggregate as in plinth protection finished even & fair without using extra cement laid in bays with construction joint of 6mm thick shall be filled with bitumen mastic filling compring of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and as directed.

Demolition of brick work as in walls/parapet walls removing grass fungus weed, roots of trees completely, grown on roof/wall surfaces complete all as specified and as directed. .

M&L for Brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radius built in cement mortar 1:6 complete complete all as specified and as directed. .

M&L for Brick work with sub class ‘B’ brick, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

Taking down chowkhats or frame with shutter (w/o taking off shutter from the frame) area not exc 1.5 Sqm Each complete all as specified and as directed.

Taking down chowkhats or frame with shutter (w/o taking off shutters from the frame) area exc 1.5 Sqm but nexc 4 Sqm Each complete all as specified and as directed. .

Taking down Shutters of any description n.exc 1 Sqm Each complete all as specified and as directed.

Taking down Shutters of any description exc 1 Sqm but n exc 2.0 Sqm Each complete all as specified and as directed.

Refixing of shutters including taking down easening and adjusting and also refixing hardware as required including renewal of unserviceable screws etc. of any description n exc 1.0 Sqm Each, in same opening complete all as specified and as directed.

S&F pressed steel door frame 105x60 mm with one or more rebated incl necessary fixing lugs hings, lock strick , etc complete all as specified and as directed.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, of size 125x 60 mm complete all as specified and as directed.

S&F 2nd class H/W, plain, solid, straight chowkhat or frame, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints etc complete all as specified and as directed.

S&F, Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and as directed. (Note: Floor door spring, sheet glass, wire cloth, etc shall be measured and paid seperately).

M&L PCC 1:3:6 type C0 ung 12.5mm graded stone aggregate as in filling of pressed steel door frames complete all as specified and as directed.

S&F 40 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both side decorative face veneer with lipping/frame to match supplied and fitted to chowkats complete all as specified and as directed.

S & F factory made 35 mm thick plain, framed, panelled door shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed.

S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc ze of members of shutters as specified in SSR Part I,section 8,clause 8.24 (a) complete all as specified and as directed.fitted to chowkhats for doors etc complete all as specified and as directed.

S&F for 30mm 2nd class H/W glazed skelton shutter for window/ventilator, open rebated and prepared to receive glass , gauze etc (with sash bars) edges of framing plain chamfered or rounded , fitted with cut and mitered beads for securing glass etc; ze of members of shutters as specified in SSR Part I,section 8,clause 8.24 (a) complete all as specified and as directed.

S&F steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or weldedcomplete all as specified and directed.

S&F steel windows or ventilators, fixed type with glazing bars complete all as specified and as directed.

S&F PVC door frame of size 50mm x 47mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube supplying & fixing in opening as per specification complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consting of frame made out of MS tubes for top and bottom rails . MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails , lock rails and bottom rails on either side and as gap insert for top rail and bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitable PVC sheet beading , and jointed together with solvent cement , supplying and fixing in the frame as per specification and drawing complete all as specified and as directed.

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed

S&F aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.

S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, Type B-21 complete all as specified and directed.

S&F mild steel cold rolled medium weight butt hinges 100mm size fixed screws to wooden frames or with welding to steel frames complete all as specified and as directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 125 mm complete all as specified and directed.

S&F 75 mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and directed.

S&F door closer hydraulically regulated degnation No2 universal type of aluminium body fixed to door frames with screws or by welding complete for door shutters of 850 to 1000mm in width complete all as specified and as directed.

S&F 300mm long mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and directed.

S&F 125mm hasp and staples,aluminium anodized including bolt to hinges plate and fixed with screws complete all as specified and directed

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified and as directed.

S&F 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane complete all as specified and as directed.

S&F 4mm thick figured glass, pinn headed type and glazing with oil putty in square n. exc 0.5 Sqm Each panes complete all as specified and as directed.

S&F 5.5 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane complete all as specified and as directed.

S&F 5.5 mm thick Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in Each pane complete all as specified and as directed.

S&F in repair double action floor door closer, hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, suitable for aluminium doors and fixed complete all as specified and directed.

S&F in repair door closer hydraulically regulated degnation No.2 universal type of aluminium body fixed to door frames with screws or by welding complete for door shutters of 850 to 1000mm in width complete all as specified and as directed.

S&F in repairs mild steel framed work such as guard bars/grills,grating etc with end of bars shouldered and/or riveted or forged into spikes and milar works including one shop coat of zinc chrome primer complete all as specified and as directed.

M&L for Cutting holes in brick walls in exc half brick and nexc one brick in cement in mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 using 20mm graded aggregate complete all as specified and as directed.

M&L for Preparation of new wooden surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for Preparation of new steel surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L 60 mm thick machine pressed precast concrete interlocking paver block and shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment complete all as specified and directed.

M & L for Sand filling under floors including watering levelled to a true surface complete all as specified and as directed.

M &L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base, sub floor of flooring, paving, path etc surfaces finished even and fair to receive top layer complete all as specified and directed.

M&L for Chequered cement concre tiles 20 cm x20 cm x25 mm thick, set, jointed and pointed with grey cement and pigment to match over and including 15 mm thick cement screed bed in CM 1:4 complete all as specified and as directed

chandan construction (BID ID -3095635)

HAFEEZ CONSTRUCTION (BID ID -3100426)

RP ANAND (BID ID -3098365)

HARISH ANAND (BID ID -3098380)

charanjeet singh (BID ID -3100745)

upadhyay Builders (BID ID -3115326)

SHRI KRISHNA CONSTRUCTIONS (BID ID -3100628)