Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹6.8 L
EMD Value
₹19,000
Closing Date
8 Feb 2024, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka State Road Transport Corporation
Somashekhariah
Alteration Works and repair works to old and unused toilet block to convert as Ladies Crew Rest Room at Depot-5 Deepanjali Nagar, BCD, Bangalore
KSRTC/2023-24/BD/WORK_INDENT60
KSRTC/2023-24/BD/WORK_INDENT60
Open
Buildings
Electronic Documents, First(One Cover)
Karnataka State Road Transport Corporation Office Bengaluru
3 documents required · 3 mandatory
₹500
₹19,000
30 Jan 2024
30 Jan 2024
5 Feb 2024
Alteration Works and repair works to old and unused toilet block to convert as Ladies Crew Rest Room at Depot-5 Deepanjali Nagar, BCD, Bangalore
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...
Earth work in surface excavation for stripping, seating of bund, Road way by manual means for lowering & levelling the ground for all worksother than foundation & depth in Ordinary rock and soft rock ...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(SRP-2021-22/V-2/5.4/9) ---- Refer all uploaded tender documents while aprticipatin...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
KSRB 2.8 : Providing and Filling in foundation with granite / trap broken metal 100mm. and down size, with approved sand including hand packing, ramming, watering, including cost of all materials and...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) i...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, pro...
Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including primingcoat with approved steel primer all complete. Fixed to opening...
Providing and fixing flush door shutter made out of solid core blockboard type, well seasoned , chemicaly treated hard wood battens andinternal frame with minimum 45 mm wide wooden frame alrounddoor s...
Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. 19.22.1 For thickness of tiles 10 m...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colo...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...
Providing and fixing water closet squatting pan (Indian type W.C. pan )with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually con...
Providing and fixing factory made single leaft rigid GRP Sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V-stabilized Isopthalic ...
providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
KSRB13-8.1 : Providing and fixing to wall, ceiling and floor, low density polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter with special flange, compression type fittings, wal...
KSRB13-8.1 : Providing and fixing to wall, ceiling and floor, low density polyethylene pipes 6.00 kgf/sq.cm working pressure 160mm outside diameter with special flange, compression type fittings, wal...
Providing and fixing 7.5 cms to 15.00 cms dia NP grating 100 mm dia. ---- Refer all uploaded tender documents while aprticipating in the tender
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and olour.600 mm long towel rail with to...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular...
Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 165 mm long, weighing not less than 110 g(SRP-2021-22/V-2/13.6.2.1/116) ---- Refer all uploaded tender documents w...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...
Wall painting with acrylic emulsion paint of approved brand andmanufacture to give an even shade :Two coats on new work afterthoroughly brooming the surface to remove all dirt, dust, mortar drops and ...
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 500X700 mm internal ...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...
Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.20.22.2 25 mm diameter ---- Refer al...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perim...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer ...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as perspe...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterio...
Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of...
Supplying PVC/GI flexible conduit pipe 25 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge ...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Do-Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box PWD part 1/2.2.2 ---- Refer all uploaded tender documents while aprticipating in the tender
Long point above 6Mtr upto 10Mtr from tapping point to out let via switch boxPWD part 1/2.2.3 ---- Refer all uploaded tender documents while aprticipating in the tender
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...
do 2.5 mm PWD part 1 2.3.3 ---- Refer all uploaded tender documents while aprticipating in the tender
do 4mm PWD part 1 2.3.4 ---- Refer all uploaded tender documents while aprticipating in the tender
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC...
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ...
do 8 Way PWD part 1/3.3.4 ---- Refer all uploaded tender documents while aprticipating in the tender
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...
do 8 Module ---- Refer all uploaded tender documents while aprticipating in the tender
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch ---- Refer all uploaded tender documents while aprticipati...
do 6Amps 3 way socket ---- Refer all uploaded tender documents while aprticipating in the tender
do 6/16 Amps universal socket ---- Refer all uploaded tender documents while aprticipating in the tender
do32 Amps DP switch ---- Refer all uploaded tender documents while aprticipating in the tender
do stepped fan regulator Tow Module ---- Refer all uploaded tender documents while aprticipating in the tender
Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V a...
Fixing all types and all capacities of fluorescent /false ceiling spot light /CFL /LED fitting s indoor on the wall /ceiling /raffters /girders using 23/0.0076" twin twisted PVC insulated wires, requ...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.PWD part 1 6.2.1 ---- Refer all uploaded tender documents while apr...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. PWD part ...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and w...
Supplying wall mounting fan suitable to operate at single-
phase 230v AC. supply. PWD part 1 6.5.1 ---- Refer all uploaded tender documents while aprticipating in the tender
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixin...
Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket 1x40/2x40 W fluorescent tube street l...
Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with...
Supply of LED Streetlight luminaire with pressure die cast
aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare cl...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over
existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. PWD part 1 13.5 ---- Refer all uplo...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing s...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ‘C’ Type curve, indicator ON/OFF, energy cross-3 with short circuit breaki...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw-1-D5-LadiesREST.doc
Tender Document • 0.33 MB
T.No-15-D5ladiesREST.doc
Tender Document • 0.22 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .