Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.3 LAccepted-Finance INDEX NO D 01 HQ CE SC PUNE SHOP NO 06 FIRST FLOOR OPP CHAMUNDA HOTEL AT BOKHIRA DIST PORBANDAR GUJARAT 360579 | PORBANDAR | GUJARAT | 360579 | L1 | Accepted-Finance LOWEST | |
| 2 | L2₹15.4 L+₹15,186.75 (1.00%)Rejected-Finance HARSH INFRASTRUCTURE NEAR DWARKADISH PETROLEUM NANDANA DEVBHOOMI DWARKA JAMNAGAR GUJARAT 361315 | DEVBHUMI DWARKA | GUJARAT | 361315 | L2 | Rejected-Finance NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹31,000
Closing Date
9 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER DAMAN
Garrison Engineer Daman, Tat RakshakVihar, Dalwada, Nani Daman Post, Daman (UT) PIN396210
ADDITION ALTERNATION AND UPLIFTMENT OF FLOORING IN PUMP ROOM AND ADJOINING AREA NEAR TRV MAIN GATE AT ICGAS DAMAN
2023_MES_615152_2
8678/E8
Open Tender
Civil Works
Works
180 days
ICGAS DAMAN
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Yes
GARRISON ENGINEER DAMAN
₹31,000
22 Dec 2023
6 Nov 2023
11 Dec 2023
6 Nov 2023
9 Dec 2023
20 Nov 2023
Amount
Demolition of brickwork or stone/boulder masonary, built in lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles.
Demolition of plain cement concrete unreinforced and reinforced in ground floor and paving above or below ground level, any thickness and removal of debris out side from MD land etc complete all as specified and directed.
Taking down door/ window shutter with frame without taking off shutters from frame of any description exc. 1.50 Sqm not exc 4.00 Sqm each etc complete all as specified and as direted.
Taking down door/ window shutter with frame without taking off shutters from frame of any description n.exc. 1.50 Sqm each etc complete all as specified and as direted.
Refixing door/ window in same opening shutter with frame without taking off shutters from frame of any description exc. 1.50 Sqm not exc 4.00 Sqm each etc complete all as specified and as direted.
Taking down cement plaster on brick masonry walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water and removal of debries out side from MD land etc complete all as specified and directed.
M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.
M&L for hard core with broken stones or boulders of gauge n.exc 63 mm spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface etc complete all as specified and as directed.
M&L for 75 mm thick PCC (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in plinth protection finished surfaces even and smooth without using extra cement complete all as specified.
S & F Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm matt finish as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm screed bed in CM (1:4) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
S&F for glazed ceramic coloured tiles 350x250x7mm/ 450x350x7mm thick on vertical surfaces such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM (1:4) as in backing coat including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for mirror polished Kota stone 15 to 20 mm thick hand cut to size 430mm x580mm in floors set and jointed in neat cement slurry and pointed in coloured cement over and including 20 mm thick CM (1:6) bedding concrete etc complete all as specified and as directed.
M&L Kota stone slab 20 to 25 mm thick in, riser to steps ,skirting dado and pillers laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing , notching edge,over 10 mm thick rendering in CM (1:4) complete complete all as specified.
M&L for 15mm thick rendering in CM 1:6 internal plaster on brick/concrete surfaces finished even and smooth without using extra cement etc complete all as specified and directed.
M&L for rendering in CM 1:4, 20 mm thick in two coats (15 mm under coat + 5mm finishing coat) on brick/concrete surfaces with 3% water proofing compound in finishing coat and finishing the surface even and fair. (Note :- WPC will be measured and paid seperately).
M&L 10 mm thick cement plaster in CM 1:3 on concrete surfaces finished even and smooth with out using extra cement on ceiling complete all as specified.
Supply only integral WPC all as specified & directed.
M&L for preparation of newly plastered surfaces and applying one coat of wall primer to the surfaces including putty 2mm to 3mm and finally applying two coats of oil bound distemper, complete all as specified and as directed.
M&L for complete removal of existing treatment and preparation of surfaces including filling of the holes/cracks on walls with plaster putty and applying two coats of oil bound distemper paint on walls over a coat of alkali resistant primer etc complete all as specified and as directed .
M&L for preparation of new plastered surface of wall, chajja, parapet etc and applying two coats of weather proof acrylic emulsion paint over a coat of acrylic primer etc complete all as specified and as directed.
M&L for preparation on Old plastered surface of wall, chajja, parapet etc and applying two coats of weather proof acrylic emulsion paint over a coat of acrylic primer etc complete all as specified and as directed.
M&L for standard aluminium section "heavy grade" powder coated of approved colour as in sliding windows, Ventillators, partitions and doors frames, shutters of required sizes including, rubber gasket, PVC wheel with ball bearing, concealed type lock and fixing of glass complete all as specified and directed. Make of aluminium section - Jindal/ Indalco/ Hindalco. (Note: (i) The measurement shall be recorded with weight of aluminium section only and rate quoted shall deemed inclusive of rubber gasket, rubber beading, PVC wheel with ball bearing, concealed type locks, handle etc (ii) Glass shall be measured and paid separately as supply only.
S&F 5.00 mm thick tinted glass fixed in aluminium sliding window shutters etc complete all sas specified and directed.
S & F 3mm thick sheet glass pin headed type ordinary quality and glazing without putty in squares not exeeding 0.5 sqm in each pane but frosted or pin headed glass complete all as specified and directed.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width op aperture 1.40mm and fixed with aluminium wire staples etc complete all sas specified and directed.
S&F aluminium anodised XPM grill aluminium alloy DG 202 grill 4.8 mm thick (in the shape of expanded metal of aluminium XPM jalli) opening size 59mm (length expansion) and 45 mm (width expansion) fixed in and including E/H frame all as per manufacturers instruction and as directed.
S&F 2nd class hard wood (SAL) plain, solid, straight chowkats and frames, wrought framed, rebated on the solid,single or double rebate rounded or chamfered, put together with glue pinned at joints etc complete all as specified and as direted.
M&L mild steel of gde Fe 410-0 as in hold fast fixed to steel/wood door/widow frames including tarring and sanding etc complete all as specified and as direted .
M&L for 30 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edges), or of veneered particle board medium density, wood particle board with commerical face veneers : supplied and fitted to chowkats etc complete all as specified and directed directed..
S & F solid PVC door frame of size 50mm x 47mm made out of prelaminated colour PVC sheet reinforced with MS square tube S&F in opening complete all as specified.
S &F factory made solid panel PVC moulded door shutter 28 to 30mm thick (style) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with wood free EPS complete all as specified.
M&L for preparation of new wood surfaces of any description exc 10cm width or girth and applying two coats of synthethic enamel paint over a coat of pink primer etc complete all as specified and as directed.
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified
M&L three coat of white wash including preparation of old ceiling plaster surfaces complete all as specified and directed.
S&F stainless steel butt hinges medium weight 100mm size etc complete all as specified and directed.
S&F aluminium, anodised, barrel tower bolts of extruded section and fixed, length of bolt 200 mm, complete all as specified and as directed.
S&F aluminium, anodised, barrel tower bolts of extruded section and fixed, length of bolt 100 mm, complete all as specified and as directed.
S&F aluminium alloy, anodised, sliding door bolit with hasp, staple & fixed clips of sheet, cast or extruded section and fixedbolts of length of bolt 300 mm, complete.
S&F extruded aluminium handles fabricated type, anodised and polished etc complete all as specified and directed 150mm size, fabricated type, anodised .
Taking down GI tubing and connection 15mm dia including cleaning of serviceable pipe for refixing the same on walls and ceilings or laid under floor complete all as specified and as directed.
Taking down GI tubing and connection 20mm dia including cleaning of serviceable pipe for refixing the same on walls and ceilings or laid under floor complete all as specified and as directed.
S&F in repair 15mm bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repairs viterous china squatting pan Orrisa pattern size 580 x 440mm white with "P" and "S" trap front or back inlet etc including connectipon to trap and to flishing to pipe, anti syphonage pipe etc incl provisioning of lime concrete complete all as specified.
M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in subase including necessary formwork and finishing the surfaces to receive floor finish etc complete all as specified and as directed.
Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete with grey cement and pigment over and including 50mm thick crushed stone cushioning all as specified and as directed.
M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in lintels up to 1.5 m clear span , cills, steps, seismic and other similar band ,plinth course string coureses ,lacing courses parapets and railing up to 60 cm height, coping, kneelers, apex stone, bed plate water trought and the like including weathering, slightly rounded or chamfered angles complete all as specified.
Taking down and re-fixing steel gate after adjusting its height to lock the sliding bolt and proper closing/opening by providings M/S angles as in hold fasts or adjusting by cutting and re-welding as directed, taking out and re-fixing the loose top supporting steel member in PCC 1:1.5:3 and making good plastered and steel surfaces with matching finish complete all as specified and directed by Engr-in-Charge.
M&L for 15mm thick screed bed in CM (1:4) laid on roof surfaces mixed with itegral water proofing compound @ 3% by weight of cement, including finishing the surfaces even and smooth without using extra cement. (Note : WPC shall be measured and paid separately at supply rates all as specified and directed.
M&L for formwork to sides of concrete foundation, footings, bases of columns, raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, for rough finished flat sufaces of concrete, complete all as specified and as directed.
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete in square, rectangular or polgonal all as specified and as directed.
M&L for Reinforced Cement Concrete (design mix) in cement concrete M-30 (using 20 mm graded stone aggregates) as in columns, pillars, piers, posts and struts all as specified and as directed.
M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.
M&L Mild steel TMT bar 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking bending spirally hooping for column, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.
M&L for WPT to non accessible RCC roof slab/chajja/canopy/parpet etc to be executed surface thoroughly wire brushed, washed and dired up and cleaned of all foreign matter and dust to receive Shalitex primer @300 gms/sqm for laying 3.00mm thick super thermolay (APP modified membrane with polyster reinforcement) 3.6 Kg/Sqm laid by torch application method and 75mm overlap in longitudinal direction and 100mm in transverse direction, a coat a silver shield (solar reflective aluminium paint) @ 0.12 Kg/Sqm all as per mfgs instructions etc with and including removed of existing WPT complete all as specified and as directed.
S&F in repair 10 ltr PVC valveless syphonic action type flushing cistern with brackets flush pipe etc complete including inlet ball valve float and handle including brackets of approved make including all connections & flush pipes for WC complete all as specified.
Dismantling posts or struts (wood, R.C.C or steel.) any section, including taking out embedded portion and making good disturbed ground to facilitate provison for embedding of new post complete all as specified and as directed.
Dismantling fencing wire mesh, any type complete all as specified and as directed.
M&L Providing precast reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed
M&L Cement concrete 1:3:6 type C2, 1:3:6 (40mm graded aggregate) for embedding of fencing post all as specified and directede by Engr-in-Charge.
S&F Mild steel work as in post or flat iron coverings of posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.including all necessary drilling, bolting and embded in pillars/walls conforming to Fe -290 Gde E-165 etc complete all as specified and directed by Engr-in-Charge.
S&F round bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking , bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips conforming to Fe 410 W (Gde E - 250) quality A complete all as specified and as directed.
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut not exceeding 15 cm long diameter of neck 5 to 10 mm complete all as specified and as directed.
S& F PVC coated GI chain link fencing in green colour of GI wire dia 3mm to 4 mm with total dia including PVC coating 4 to 5.5mm dia complete all as specified and as directed by the Engr in charge. Note : The weight of chain link fencing should not be less than 5.60 Kg/Sqm
M&L for applying two coats of synthetic enamel paint on steel and iron surfaces over 10 cm in width or girth over red oxide primer incl preparation of surfaces complete all as specified and as directed.
M&L for applying two coats of synthetic enamel paint on steel and iron surfaces on exc 10 cm in width or girth over red oxide primer surfaces complete all as specified and as directed.
Material and labour for point wiring, in repairs complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC casing and caping of size 20 mm width or above as required at site with all accessories such as Tee ,Corner, overlaping connector etc.along the suface of walls/roofs/ ceilings/floors etc including concealed PVC box for fixing of and including modular plate as per no of switch modules flush mounted suitable for fixing modular switches, sockets,fan regulators etc.including modular plate cover of required size with necessary stainless steel cadmium plated screws and including 1.5 Sqmm PVC insulated, multistranded, FRLS type,unsheathed(Green colour),single core, copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and directed for the following:- One light point / fan point controlled by one switch.
All as per column No 66 and One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .
All as per colum No 66 above, but point wiring with 2.5 sqmm and earth conductor of size 1.5 sqmm complete all as specified and directed for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board.
Supply & fixing modular type switch 6 Amps ,1way,1 module.
Supply & fixing modular type switch 16 Amps ,1way,1 module .
Supply & fixing modular type socket 6 Amps, 2/3 Pin combined 2 module .
Supply & fixing modular type socket 6 A/16 Amps, 6 Pin combined 2 module.
Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body complete all as specified and directed.
Supply & fix modular type fan regulator stepped type 120 W- 2 module, suitable for 1200mm sweep ceiling fans complete all as specified and directed.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) point complete, including fixtures and fittings such as switches, ceiling rose, pendents, regulators, sockets, main switch, MCB and DBs etc complete all as specified and directed
Supply & fix in repair LED tube light fitting 1X 20 Watt white powder coated CRCA housing with highpower LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver, LED strip, connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and directed. Make:- Crompton Cat No- LDL-20-CDL or equivalent in Bajaj/Halonix/ Phillips
Supply & fix in repair LED tube light fitting 1X 10 Watt white powder coated CRCA housing with highpower LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver, LED strip, connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and directed. Make:- Crompton Cat No- LDL-10-CDL or equivalent in Bajaj/Halonix/ Phillips
Supply and fix in repair, factory made, sheet metal enclosure, 8 way double door, 415 volts, AC,TPN, vertical distribution board, 4 way, painted with epoxy based powder coated suitable for mounting MCCB as incomer of rating upto 160Amps, FP, 16-36 KA and MCB SP /TP as outgoings and complete with and including 200 amps rated copper busbar, neutral bar,earth bar, connecting cable links with and including top and bottom removable gland plate, complete with IP 43 protection, all as specified and as directed.
Supply & fix for MCB SP 6 to 32 Amps 10 KA,"C" series complete all as specified and directed.
Supply & fix for MCB DP 40 Amps 10 KA,"C" series complete all as specified and directed.
Material and labour for submain wiring along with earth wire using 2 X 4.0 sq mm(colour coading) + 1X1.5 sq mm earth wire(green colour) of single core PVC insulated multistranded copper conductor 1100 Volts grade FRLS type in and including PVC casing caping complete all as specified
Taking down ceiling/Exhaust fan/wall fans, from its position and keeping aside in safe custody for servicing and unserviceable fan shall be deposited in MES store yard complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep, Min air delivery 210 CFM with service vakue 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
Supply and fix exhaust fan, steel body AC single phase, 230V of size 3080mm seep with, blades and frame and louvers complete all as specefied and directed.
Cutting the existing surface of wall on brick/stone masonary for making round hole at any heightsuitable for fixing 380/300 mm sweep exhaust fan and making good the distrubed surfaceand matching with existing surface complete all as specified and directed.
Supply and fix down rod made of MS pipe mediun grade 15mm dia of 60cm long duly predrilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan
Supply and fixing LED strret light fitting 35 watt 230vAC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 Protection complete all as specifed and directed. Note : The cost of GI bracket mounting clamps, bolts and nuts, junction box shall be measured and paid seperately.
Supply and fix FRP looping box withhinged doors and cable in/out holes at bottom including MCB SP 6 Amp, 10 KA "C" series including, MS flat iron clamps 25x3mm with nuts, bolts & washers etc. MS clamps dyly red oxide primer and over one coat of synthetic enamel paint and connecting rlrctric cables with suitable size thimbles all as specified and directed.
Supply and fix Street light mounting bracket of GI pipe 40mm dia medium grade 1.5mtrs long bent to shape, MS flat iron clamps 32x4mm with bolts, nuts and washers etc. MS clamps duly red oxide primer and over one coat of synthetic enemal paint complete all as specified and directed.
Material and labour for earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to galvanized steel strip 25 x 4 mm size by means of bolts, nuts, check nuts and washer of galvanized steel, watering pipe of 20 mm bore, galvanised iron, light grade, and 40 mm bore galvanised iron light grade for earth strip protection including all excavation earth work in any type of soil, PCC pit in PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) and RCC 1:2:4, type B1 (using 20 mm graded stone aggregate) for precast chamber cover 50 mm thick, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm), with charcoal, salt, funnel complete all as shown in the electrical plate No 3 of SSR part –I and testing of earthing on completion complete all as specified & directed. Note:- Quoted rates shall be deemed to include for earth strip with protection pipe up to 7.5 M length..
Taking up cast iron water mains (including all fittings) with spigot and socket ends and lead joints and recovering lead of 100mm dia pipe.
Dismantling the monobloc pump set of capacity 30 HP, 3 phase, 415 volts, 50 Hz of any make and carrying out servicing, overhauling, greasing after disconnecting of electric connection, suction and delivery pipes, pipe lines and providing dummy plates including replacement of minor spare parts viz gaskets, packings, mechanical seal, gland rope, shaft key, shaft sleeves, 'O' ring set, nuts, bolts and washers etc and varnishing of winding coils with insulating oil and assembling all parts and pump, reconnecting of pipes and electric connection to existing system and testing after refixing , complete all as specified and directed
Taking down of LT panel including all accessories after discconecting of all electrical connection including packing, bus bar, MCCB''s, MCB's, voltmeter ammeter, indicators, nuts, bolts and washer dismantling all part etc. and keep in safe custody and carrying out two coat painting, reassemble the LT panel including all conneting accessories, electrical connectiont to existing system and testing after refixing complete all as specified and directed.
Supply, laying and jointing cast iron pipe 100mm dia, class 'A' spigot and socket type centrifugally cast suitable for rubber tyton joints in any length duly complying IS requirments and cutting to size as per site requirment and laid in trenches /road crossing/culverts/ floors etc and testingcomplete all as specified and directed.
M&L CI bends (any type, radius and angle) tapers any type (straight, bends, increasing, deacreasing or double socket etc) Tee pieces single branch 'Y' junction, double branch cross (all sockets of socket and spigot) collars, caps and plugs upto 150mm bore complete all as specified and directed.
M&L Bends, Tapers, Tee pieces (single & double branch) any type and angle/radius and straight connecting pieces upto 150mm bore complete all as specified and directed.
Supply, install, testing and commissioning chlorine dosing pump electracally operated single phase pressure feed type geared motor adjustable dosing pump complete with all accessories such as PVC solution pot, PVC pipe on delivery side and suction side of required size, injection check valve etc. and cable connection with copper conductor cable up torequired length complete all as specified and directed. Make : Declibac Technologies Pvt Ltd or equivalent in approved makes.
Supply and fix sluice valve flanged type, grey cast iron body, bonnet dome, stuffing box, hand wheel, stainless steel stem of class PN 1.6 complete with 02 nos flanged joints with jointing material such as 3 mm thick fibre gasket fixed to CI/DI fittings and pipes including nuts, bolts and washers and testing conforming to IS -14846-2000 for 100mm dia all as specified and directed.
Supply and fix Non Return Valve 100 dia flange type gray cast iron body with jointing materials fixed to CI/DI pipes / fittings including nuts, bolts, washers etc all as specified and directed.
Supply and fix pump and motor mounted base frame including fabricated of mild steel common base frame of suitable size duly painted, nuts, bolts and washers, anti vibration rubber pads including all standard accessories complete all as specified and directed.
Harsh Infrastructure
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .