REPAIR REPLACEMENT OF TILING PAINTING WORK AND MISC BR WORK IN MD ACCN OF CARIAPPA VIHAR MT LINE STN WKSP EME OF AGE BR II UNDER GE WEST DELHI CANTT 10

Amount

Dismantling of floor, hearth or wall tiling including internal layer of terrazzo dado and mortar bedding removing rubbish of the premises complete all as specified and directed.

M&L for vitrified light coloured joint free tiles 600x600 8 to 10 mm thick (square/rectangular) polished , area of each tile n exc 0.36 sqm, in floor set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:6 etc complete all as specified and directed.

Ditto as per item No 2above but on vertical surfaces of wall over & incl CM(1:4) 10mm thick cement plaster etc. comnplete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surfaces 600x300X7 mm thick joint free as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including rendering 10mm thick in cement mortar 1:4 on brick wall of concrete surfaces and finished fair and even complete all as specified and directed.

M&L for coloured joint free non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement, laid over and including cement screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M&L for Coloured Cement concrete Pre polished & reflective type chequered tiles 30cm X 30cm X 25mm thick machine pressed; set jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 and cut and pointed with white cement and pigment complete all as specified and directed.

M&L for 18 to 20mm thick black granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms and like in including 15mm thick CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl polishing, and making hole in the platform for gas connection complete and incl nosing of the edges half round including dismantalling old and rubbish off from MOD land complete all as specified and directed.

M&L for refixing the interlocking paver block any shape and size complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 50mm thick sand cushion/sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine cut Kota stone slab 20 to 22 mm thick as laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including cement screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls including filling depressions with putty cleaning of paint stains on floor/window/joinery surfaces and applying one coat of Oil Bound Distemper complete all as specified and directed. Note :- The work shall be carried out at different locations and in different measurements/touch ups (even it is below 1 Sqm or othewise.)

M & L for complete removal of existing treatment from walls applying a coat of primer over wall care putty and applying two coats of Oil Bound distemper with rich matt finish with roller complete all as specified and directed. Note: Second coat shall be applied in the same way as the first coat to keep at least 24 hours time interval between two successive coats to let the preceding coat dries properly.

M&L for preparation of old surfaces of ceiling and applying one coat of Oil bound distemper with roller complete all as specified and as directed.

M & L for preparation of old painted wooden surfacesover 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed .

All as per item No- 15 above but on steel surfaces.

Taking down cement plaster on brick work including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises and M&L for 15 mm thick rendering in ready mix mortar on walls as whole or in patch of any faces of brick/concrete finished even and fair without using extra cement including necessary scaffolding complete all as specified and directed.

All as per item 17 above but M&L 5 mm thick rendering of ready mix mortar of approved make on ceiling, as whole or in patch complete all as specified and directed..

All as per item 17 above but M&L 15 mm thick rendering with ready mix mortar as whole or in patch on external face of walls.

M&L for preparation of new surfaces of wall and applying two coat of Oil bound distemper with roller complete over wall care putty (minimum thickness 1 mm) all as specified and as directed.

M&L for preparation of new surfaces of ceiling and applying two coat of Oil bound distemper with roller complete over wall care putty (minimum thickness 1 mm) all as specified and as directed.

M&L for preparation of new surfaces of wall and applying two coat of cement base paint over a coat of wall care putty (minimum thickness 1 mm) complete all as specified and as directed.

M&L brick work built in cement mortar 1:6 using sub class 'B' bricks (old size bricks) straight or curved on plan exc 6 mtr mean radius including demolition of brick work built in Cement mortar and removing the debries beyond MoD land complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 including demolition of brick work built in Cement mortar and removing the debries beyond MoD land complete all as specified and directed.

M&L for 15 mm thick rendering in ready mix mortar on walls as whole or in patch of any faces of brick/concrete finished even and fair without using extra cement including necessary scaffolding complete all as specified and directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming Fe 410-W (Gde-E-250 quality -A) including dismantling wrought iron or mild steel work of any description not otherwise provided for concerete all as specified and directed.

M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including taking down old GI sheets complete all as specified and directed.

Providing & Fixing in repairs in position suspended false celling system using E–Grid suspended celling Grid system . The size of Grid shall be 595 X 595 X 8mm (one side aluminium foiling) with powder coated GI frame work, main runner 39X24mm, cross tee 29X24mm and wall angle 22.2X22.2mm using 8mm thick High Pressure Stream cured non primered classic/designer variant E–Board ISI Marked IS No 14862–2000. Fibre cement E–Board to be placed in the gird of E–Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers (level clip with wire) 1.20m centre to centre from the soffit of the roof with butter fly clips using soffit cleat (web:25mm, Flange:37mm & Thickness : 1.8 mm) and metal row plug (12.7mm diameter) including dismaltaling of old false ceiling complete all as specified and diracted.

Dismantling of Brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L 40m thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on bedded in cement mortar (1:6) 15mm thick on mud phuska complete all as specified and directed.

Except brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% crude oil by weight of cement on beded in cement mortar (1:6) 15mm thick on mud phuska complete all as specified and directed .

M&L for cement concrete type 1:2:4 type B0 using 12.5mm gradedaggregate in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Raking out joints/ pointing to brick tiles 30 cm by 15 cm laid flat as in floor roofs with cement mortar , etc complete all specified and directed .

M & L flush pointing to 30 cm by 15 cm brick tiles with cement mortar 1:3 , laid flat on roof complete all as specified and directed.

Taking down rolling shutters including guide rail, spring, locking arrangements , riveting, cover dome etc exc 4.0 sqm but not exc 6.00 sqm each complete all as specified and directed.

S&F Framed work as in doors or gates of angle/channel/Flat iron or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening, fixing and locking arrangements confirming to Fe - 410 complete all as specified and directed.

S&F 1.6 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L for Cutting holes in brick walls/concrete wall in cement mortar for inserting hold fast and similar works etc. and making good to dismentalled portion in CM 1:3 or cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in wall exc half brick but n exc one brick thick complete all as specified and as directed.

M&L for Mild Steel work as in hold fasts complete all as specificed and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone Aggregate) as in bed blocks for hold fast complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 40mm graded stone Aggregate) as in filling foundation , mass concrete, complete all as specified and directed.

Repair/Replacing damaged components of rolling shutters of any size/overhauling by oiling, greasing of bearing and movable parts of rolling shutters of any size incl replacing of all unserviceable parts like flush butt welding of any broken members, spring, locking arrangements, anchoring rod , riveting to make the shutter absolutely in working condition complete all as specified and directed.

M&L Brushing greasing of steel window shutters by straightening of bended portion of the section and Z section including welding of broken hinges, handles, wind stay etc complete all as specified and directed.

Repairs to steel gates/steel doors/sliding doors by straightening the bent portion and broken parts with welding and gas cutting including greasing all as directed by Engineer in charge. Incorporated items will be measured seperatly

S&F100 mm dia cast iron water socketed pipes with or without ears with lead joint laid in trenches/floors or fixed to walls including takingout old pipes complete all as specified and directed.

S&F in repair cast iron bends, elbows, Tee with or without door plate, etc of 100mm dia or diminishing pieces or tapers with lead joint laid (larger bore measured) complete all as specified and directed.

S&F 75 mm dia (bore of pipe) cast iron (sand cast) soil, waste and vent pipe in any length, with or without ears with lead joint laid in trenches/floors or fixed to walls including takingout old pipes complete all as specified and directed.

S&F in repair cast iron bends, elbows, Tee with or without cover plate, etc of 75 mm dia or diminishing pieces or tapers lead joint (larger bore measured) complete all as specified and directed.

S&F in repair stack clamps suitable for 100 mm bore pipe, made out of 25mm x 3mm flat iron and 16mm dia round iron stay including bolts and nuts, securing ends of stays to wall or roof with concrete/cement mortar upto seven storey building etc complete all as specified and directed.

All as per item 52but for 75mm dia bore pipe.

M&L for preparation for complete removal of old paint and applying two coat of cement base paint over a coat of wall care putty (minimum thickness 1 mm) complete all as specified and as directed.

S/F in repair 150 mm steel handlr for steel cupboard/almirah (inbuilt) complete all as specified and directed.(Sample will be approved by GE)

S/F in repair lock (four lever) for steel cupboard/almirah (inbuilt) complete all as specified and directed.(Sample will be approved by GE)

Demolition of cement concrete (reinforced) of any description as in downward facia, window chajja etc not otherwise specifically provided for ,by mechanical means (like drill machine, Hilti, pneumatic chisel, etc) and making good with existing surfaces by CM plaster 1:4/PCC 1:2:4 adjoining of RCC junction , edges and damaged portion of RCC member and including rubbish off the premises of MOD land complete all as specificed and directed. (Bldg No -P-01 and P-5)

M&L for applying Two coats of 100% Premium acrylic emulsion(Weather coat) paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over putty not less than 1.0 mm complete after complete removal of old surface all as specified and all as directed by Engr-in-Charge .

M & L for 40 mm upvc pipe in repair fixed complete to walls, ceilings or in floors etc. including short lengths, with all pipe fittings such as ends, elbows,Y Shape elbow ,unions, tees, reducing tees, adoptors, sockets, plugs, hose clips etc. and fixing to walls etc, complete with saddles (snap clips), wall clips, hooks, ® complete all as specified and directed.The work shall be carriedout in multistories bldgs upto 7th storeys and necessary sacffolding/safety measures be taken and no extra payments will be given for the scaffolding/safety measures.

Deduct Credit: for demolished/dismantled material of (-) Rs107650.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum

M/S DSSP Construction Co.

M/S Laxmi Construction

HANUMAN BUILDERS

GLOBAL DEVELOPERS COMPANY

M/S Ayub Khan

S D Constructions

M/s M M BAHL

excel electric co