IMPROVEMENT TO EXISTING HIGH TENSION DISTRIBUTION SYSTEM AT AUNDH MIL STATIONUNDER GE (MH AND RH) KIRKEE

Amount

Supply laying & testing of HT cable in trenches, or pipes etc. XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor 22000 Volts grade of size 3 core 185sq mm completed all as specified and directed by Engr-in-Charge

Supply laying & testing of HT cable in trenches, or pipes etc. XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor 22000 Volts grade of size 3 core 150 sq mm completed all as specified and directed by Engr-in-Charge

Supply laying & testing of HT cable in trenches, or pipes etc. XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor 22000 Volts grade of size 3 core 95 sq mm completed all as specified and directed by Engr-in-Charge.

Disconnecting the power supply, dismantling the cable ends and taking down without damaging the existing HT cable XLPE, 22 KV grade of size 3 core 150 Sq mm near 2/4 pole structures from trenches completed all as specified and directed by Engr-in-Charge

Relaying the existing HT cable XLPE, 22 KV grade of size 3 core 150 Sq mm in trenches including connecting the cable ends to pole/VCB etc and testing complete completed all as specified and directed by Engr-in-Charge

M & L GI Tubing "medium grade" galvanized for protection of HT Cable at road crossings, pole/structture etc all as specified of size 100 mm bore completed all as specified and directed by Engr-in-Charge

M & L GI Tubing "medium grade" galvanized for protection HT of Cable at road crossings, pole/structture etc all as specified of size 80 mm bore.completed all as specified and directed by Engr-in-Charge

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 in depth for takingdown the existing cable/laying UG cable getting out in hard / dense soil completed all as specified and directed by Engr-in-Charge

All as per item No 8 above but in soft / loose soil completed all as specified and directed by Engr-in-Charge

Returning filling in including spreading levelling watering and well ramming in layers not exc. 25 cm thick each completed all as specified and directed by Engr-in-Charge .

M & L for riddle earth obtained from excavated soil for the purpose of cable cushioning including watering and consolidation completed all as specified and directed by Engr-in-Charge

Suply & laying reinforced precast concrete cable cover , Class EHV type 1 with peak and size 450mm x 230 mm x 50 mm complete for cable protection completed all as specified and directed by Engr-in-Charge

Removing excavated soil to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point of any type of soil completed all as specified and directed by Engr-in-Charge

Taking down burnt bricks /PCC covers of any size from trenches and relaying the serviceble bricks/covers above the HT cable laid in trenches completed all as specified and directed by Engr-in-Charge

Supply and fix HT cable jointing kit for 22 KV grade cable for indoor end termination heat shrink type joint and complete joint material with accessories suitable for 3 core XLPE armoured Al conductor cable upto 95 Sq mm completed all as specified and directed by Engr-in-Charge (Location:257 EME WKSP TFR)

Supply and fix HT cable jointing kit for 22 KV grade cable for indoor end termination heat shrink type joint and complete joint material with accessories suitable for 3 core XLPE armoured Al conductor cable size 150 to 185 Sq mm completed all as specified and directed by Engr-in-Charge (Location:BDE TFR at OTM ACCN )

Supply and fix HT cable jointing kit for 22 KV grade cable for outdoor end termination heat shrink type joint and complete joint material with accessories suitable for 3 core XLPE armoured Al conductor cable upto 95 Sq mm completed all as specified and directed by Engr-in-Charge .(Location:Bldg No P-159 O/H line)

Supply and fix HT cable jointing kit for 22 KV grade cable for outdoor end termination heat shrink type joint and complete joint material with accessories suitable for 3 core XLPE armoured Al conductor cable size 150 to 185 Sq mm completed all as specified and directed by Engr-in-Charge (Location:Near MLI S/S O/H line)

Supply and fix HT cable jointing kit for 22 KV grade cable for straight through termination heat shrink type joint and complete joint material with accessories suitable for 3 core XLPE armoured Al conductor cable Upto 95 Sq mm completed all as specified and directed by Engr-in-Charge . (Location: old md two pole structure at Main 22 KV MRS)

Supply and fix HT cable jointing kit for 22 KV grade cable for straight through termination heat shrink type joint and complete joint material with accessories suitable for 3 core XLPE armoured Al conductor cable size 185 Sq mm to 240 Sq mm completed all as specified and directed by Engr-in-Charge . (Location:Near HRDC two pole structure)

Supply, install, testing and commissioning of 22kV, 630A, 16kA/3sec, 5Way, Outdoor Extensible SF6 Insulated motorized RMU as per MSEDCL R-APDRP Specification with 1No. feeder with Load Break Switch and 4Nos. feeder with VCB. 1LBS+4VCB +M completed all as specified and directed by Engr-in-Charge (Make :ABB, Schinder & CG) 1. Each Incomer feeder with Switch consists of: (a). Motorized 630A load breaker switch with built-in earth switch with full making capacity -01 Nos (b). Mechanical position indicator. Switch ON/OFF/EARTHED - 01 Nos (c). Live Cable Indication - 01 Nos (d). Cable compartment cover interlocked with earth switch - 01 Nos (e). Cable termination bushings suitable for 1 no. 3CX300mm2 XLPE cable - 01 Set (f). 22kV Screened Cable termination kit with boot - 01 Set. (g). NO/NC contact for - 01 Set (i) Isolator ON/OFF (ii) Earth Switch ON/OFF (iii) Fault indicator Operated (h) Command Output for - 01 Set (i) Isolator close (ii) Isolator Open (iii) FPI reset 2.Each Outgoing VCB feeder consists of: (a). Motorized 630A Vacuum Circuit Breaker with manual spring charging - 01 Nos arrangement and manual close & open push buttons, ON / OFF indication and series trip coil for self-powered relay & shunt trip coil for external tripping.

(b). Self-powered Numerical O/C & E/F relay type CSDPR with CTs of ration - 01 Set 100-50/1A, 2.5VA, 5P10 for 100/1 and 10P10 for 50/1 (protection core) & 100-50/1A,2.5VA, CI 0.5 for 100/1 and CI 1 for 50/1(metering Core) (c). Manually operated 630A load breaker switch with built-in earth switch with full making capacity - 01 Nos (d).Mechanical position indicator. Switch ON/OFF/EARTHED - 01 Nos (e). Live Cable Indication - 01 Nos (f) . Cable compartment cover interlocked with earth switch - 01 Nos (g) Cable termination bushings suitable for 1no. 3CX300mm2 XLPE cable - 01 Set (h) 22kV Screened Cable termination kit with boots - 01 Set (j) NO/NC contact for - 01 Set (i) Breaker ON/OFF (ii) Relay operated

3.Metering Module as Bus PT. (a) Set of 03nos Single Phase potential Transformers having ration 22kV/rt3:110v/rt3,50VA Class 0.5 (b) Provision for installation of Multifuction Meters for enegery reading in breaker functions. 4. Common items per RMU (a) SF6 Gas Pressure indicator with auxiliary contacts. (b) 1 No. Handles for RMU. (c) Battery & Battery Charger 5. Measuring instruments - 01 Set

Supply, install, testing and commissioning of 22kV, 630A, 16kA/3sec, 4Way, Outdoor Extensible SF6 Insulated motorized RMU as per MSEDCL R-APDRP Specification with 1No. feeder with Load Break Switch and 3Nos. feeder with VCB. | 1LBS+3VCB +M, The following locations completed all as specified and directed by Engr-in-Charge . (Make : C-sec (C&S), L&T, Siemens) (a) 330 Bde OTM Accn - 02 Nos (Locations: S/S Bldgs (P-90) & 4 Pole S/S - P-249). (b) Old Md Accn - 01 Nos (Location : Near Bldg No P-159) (c) MAP PH-II Accn - 01 Nos (Location : SS3) 1. Each Incomer feeder with Switch consists of: (a). Motorized 630A load breaker switch with built-in earth switch with full making capacity -01 Nos (b). Mechanical position indicator. Switch ON/OFF/EARTHED - 01 Nos (c). Live Cable Indication - 01 Nos (d). Cable compartment cover interlocked with earth switch - 01 Nos (e). Cable termination bushings suitable for 1 no. 3CX300mm2 XLPE cable - 01 Set (f). 22kV Screened Cable termination kit with boot - 01 Set. (g). NO/NC contact for - 01 Set (i) Isolator ON/OFF (ii) Earth Switch ON/OFF (iii) Fault indicator Operated (h) Command Output for - 01 Set

(i) Isolator close (ii) Isolator Open (iii) FPI reset 2.Each Outgoing VCB feeder consists of: (a). Motorized 630A Vacuum Circuit Breaker with manual spring charging - 01 Nos arrangement and manual close & open push buttons, ON / OFF indication and series trip coil for self-powered relay & shunt trip coil for external tripping. (b). Self-powered Numerical O/C & E/F relay type CSDPR with CTs of ration - 01 Set 100-50/1A, 2.5VA, 5P10 for 100/1 and 10P10 for 50/1 (protection core) & 100-50/1A,2.5VA, CI 0.5 for 100/1 and CI 1 for 50/1(metering Core). (c). Manually operated 630A load breaker switch with built-in earth switch with full making capacity - 01 Nos (d).Mechanical position indicator. Switch ON/OFF/EARTHED - 01 Nos (e). Live Cable Indication - 01 Nos (f) . Cable compartment cover interlocked with earth switch - 01 Nos (g) Cable termination bushings suitable for 1no. 3CX300mm2 XLPE cable - 01 Set (h) 22kV Screened Cable termination kit with boots - 01 Set (j) NO/NC contact for - 01 Set (a) Breaker ON/OFF (b) Relay operated

3.Metering Module as Bus PT. a) Set of 03nos Single Phase potential Transformers having ration 22kV/rt3:110v/rt3,50VA Class 0.5 (b) Provision for installation of Multifuction Meters for enegery reading in breaker functions. 4. Common items per RMU (a) SF6 Gas Pressure indicator with auxiliary contacts. (b) 1 No. Handles for RMU. (c) Battery & Battery Charger 5. Measuring instruments - 01 Set

Supply, install, testing and commissioning of 22kV, 630A, 16kA/3sec, 3Way, Outdoor Extensible SF6 Insulated motorized RMU as per MSEDCL R-APDRP Specification with 2Nos. feeder with Load Break Switch and 1No. feeder with VCB. | 2LBS+1VCB +M, completed all as specified and directed by Engr-in-Charge . (Make : C-sec (C&S), L&T, Siemens), (Location at MAP PH-II pump house). 1. Each Incomer feeder with Switch consists of: (a). Motorized 630A load breaker switch with built-in earth switch with full making capacity -01 Nos (b). Mechanical position indicator. Switch ON/OFF/EARTHED - 01 Nos (c). Live Cable Indication - 01 Nos (d). Cable compartment cover interlocked with earth switch - 01 Nos (e). Cable termination bushings suitable for 1 no. 3CX300mm2 XLPE cable - 01 Set (f). 22kV Screened Cable termination kit with boot - 01 Set. (g). NO/NC contact for - 01 Set (i) Isolator ON/OFF (ii) Earth Switch ON/OFF (iii) Fault indicator Operated 2 Command Output for - 01 Set

(i) Isolator close (ii) Isolator Open (iii) FPI reset (c). Manually operated 630A load breaker switch with built-in earth switch with full making capacity - 01 Nos (d).Mechanical position indicator. Switch ON/OFF/EARTHED - 01 Nos (e). Live Cable Indication - 01 Nos (f) . Cable compartment cover interlocked with earth switch - 01 Nos (g) Cable termination bushings suitable for 1no. 3CX300mm2 XLPE cable - 01 Set (h) 22kV Screened Cable termination kit with boots - 01 Set (j) NO/NC contact for - 01 Set (a) Breaker ON/OFF (b) Relay operated 3.Metering Module as Bus PT. (a) Set of 03nos Single Phase potential Transformers having ration 22kV/rt3:110v/rt3,50VA Class 0.5 (b) Provision for installation of Multifuction Meters for enegery reading in breaker functions. 4. Common items per RMU (a) SF6 Gas Pressure indicator with auxiliary contacts. (b) 1 No. Handles for RMU. (c) Battery & Battery Charger 5. Measuring instruments - 01 Set

Supply, install, testing and commissioning of 22kV, 630A, 16kA/3sec, 1Way, Outdoor Extensible SF6 Insulated motorized RMU cable in cable out type consisting with 1No. VCB. | 1VCB, completed all as specified and directed by Engr-in-Charge .(Make : C-sec (C&S), L&T, Siemens) (Location at EME Work shop , 330 inf Bde, Near PH -I Bldg No P-320, Location at Near Bldg No P-292 & MRS).

1.Each VCB feeder consists of: (a). Motorized 630A Vacuum Circuit Breaker with manual spring charging - 01 Nos arrangement and manual close & open push buttons, ON / OFF indication and series trip coil for self-powered relay & shunt trip coil for external tripping. (b). Self-powered Numerical O/C & E/F relay type CSDPR with CTs of ration - 01 Set 100-50/1A, 2.5VA, 5P10 for 100/1 and 10P10 for 50/1 (protection core) & 100-50/1A,2.5VA, CI 0.5 for 100/1 and CI 1 for 50/1(metering Core). (c). Manually operated 630A load breaker switch with built-in earth switch with full making capacity - 01 Nos (d).Mechanical position indicator. Switch ON/OFF/EARTHED - 01 Nos (e). Live Cable Indication - 01 Nos (f) . Cable compartment cover interlocked with earth switch - 01 Nos (g) Cable termination bushings suitable for 1no. 3CX300mm2 XLPE cable - 01 Set (h) 22kV Screened Cable termination kit with boots - 01 Set (j) NO/NC contact for - 01 Set (a) Breaker ON/OFF (b) Relay operated

2.Common items per RMU (a) SF6 Gas Pressure indicator with auxiliary contacts. (b) 1 No. Handles for RMU. (c) Battery & Battery Charger 3. Measuring instruments - 01 Set

Taking down unserviceable earting and M&L for earthing with galvanised steel earth plate electrode 60cm x 60 cm x 6.3 mm burried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate vertically to depth of not less than 1.5 mtr below ground level connected to and including GI strip of size 32 x 6 mm 7.5 mtr beyond the earth pit as earthing lead including GI protection pipe 40 mm bore (light grade) upto 7.5 mtr beyond the earth pit and connecting to equipments by means of earthing lead , GI bolts, nuts & washer etc with provision of char-coal and salt etc all as per electrical plate No 3 of SSR Part - I, 2009 including RCC cover and MS angle iron frame watering arrangements with GI pipe 20 mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork and testing on completion etc complete all as specified and directed by Engr-in-charge.

M & L for Earth continuity conductor or main earhing lead fixed to wall on batten or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situtation for loop earthing etc. as required 32 x 6 mm GI Strip completed all as specified and directed by Engr-in-Charge

M & L PCC type B-1, 1:2:4 (20 mm grade stone aggregate) precast slab flooring, beded and pointed in cement mortar 1:6 and painted in cement mortar 1:3 (50mm thick) completed all as specified and directed by Engr-in-Charge

M & L PCC type B-2, 1:2:4 (40 mm grade stone aggregate) slab flooring, beded and jointed in cement mortar 1:6 and painted in cement mortar 1:3 (100 mm thick) completed all as specified and directed by Engr-in-Charge

Dismantling the existing HT steel tubular poles and stacking at sitecompleted all as specified and directed by Engr-in-Charge

Dismantling the existing HT PCC poles and stacking at site completed all as specified and directed by Engr-in-Charge

Dismantling and taking down of unserviceable old existing HT GOD and stacking at site completed all as specified and directed by Engr-in-Charge

Dismantling and taking down of unserviceable old existing HT DO fuse etc and stacking at site completed all as specified and directed by Engr-in-Charge

Dismantling the existing insulators any type, any size completed all as specified and directed by Engr-in-Charge

Dismantling and taking down of unserviceable old existing HT over Head line(ACSR Conductors) of any size completed all as specified and directed by Engr-in-Charge

Dismantling the existing cross arms or M.S channel or angle sections etc, complete and setting aside for re-use with in 50 m completed all as specified and directed by Engr-in-Charge

surendra infrastructure pvt ltd

KR POWER INFRA INDIA PVT LTD.

Rajan Traders

SBS Enterprises