SPECIAL REPAIR TO BLDG NO T-11 (R BTY LINE) OF 1861 MED REGT AND BLDG NO P-29 AND 30 WITH CERTAIN OTHER WORKS UNDER GE DINJAN

Amount

Excavation over areas, not exceeding 1.50m deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation, or for shafts, wells, cesspits, manholes, pier holes, or laying of cables, poles, etc area not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.

Removal of surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above starting point complete all as specified and as directed.

Dismantling of asbestos cement (corrugated or semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed.

S&F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note : Colour of ridge shall be same colour as that of sheet used for roof.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F for Joist, channel, angle, or tee sections of Fe 290 (Gde E-165) fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards /slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for anodised aluminium snap grid size 605 X 605 mm frame work for false ceiling complete all as specified and as directed.

S&F for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

M&L for 6mm thick high pressure, oceanic pre-primed, self embossed, non asbestos fiber cement decorative board, water, termite and fire resistant for insulation and acoustic purpose fixed or laid/ inserted to timber /GI / Aluminium frame work with screws complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

Taking down chowkhats or frames not exceeding 1.5 sqm each (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkhats or frames exceeding 1.5 sqm but not exceeding 4 sqm each (without taking off shutters from the frames) complete all as specified and as directed.

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each and refixing in the same opening complete all as specified and as directed.

S&F for pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed.

S&F for pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed.

M&L for 35 mm thick second class hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F for 35mm thick, glazed/skelton shutters with second class hard wood, open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutter as specified in SSR Part I Section 8, clause 8.24 (a) complete all as specified and as directed.

S&F for 30mm thick, glazed/skelton shutters with second class hard wood, open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutter as specified in SSR Part I Section 8, clause 8.24 (b) complete all as specified and as directed.

S&F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter, 30 mm thick (style) consisting of frame, made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR Part II 2010 complete all as specified and as directed.

M&L for PCC (1:2:4) type B0 (using 12.5 mm graded aggregate) as in hold fast and filling of steel chowkhat etc. complete all as specified and as directed.

S&F for mild steel flat iron as in hold fast 25x6 mm confirming to Fe-290 (Gde E-165) complete all as specified and as directed.

S&F for steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F for steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F for steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and as directed.

S&F for anodised aluminium windows/ventilator sliding shutter, three track way type without sash bars, alumimium sections weighing 0.55 Kg/m including necessary joining cleats, glass clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings, such as peg stays, 150mm long (1 No) hinges type B-21, 100mm long (2 Nos) suitable handle, with complete accessories including glass, wire mesh, anodised aluminium frame (chowkhat) complete all as specified and as directed.

S&F for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and as directed.

S&F for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F for 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

M&L for preparation of new or untreated surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old painted surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth, not otherwise described, applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling of unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed.

Dismantling of framed timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed.

M&L for Second class hard wood in scantlings wrought timber fixed complete all as specified and as directed.

M&L for second class hardwood exceeding 6 not exceeding 13 Sqcm plain fillets of square, rectangular or triangular in section, clean sawn, se-cured with nails or brads complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10 mm and 5 mm thick) in cement mortar (1:4) using water proofing compound in top layer (water proofing compound measured separately) and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick of internal wall on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick on ceiling in cement mortar (1:3) finished even & smooth without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and as directed.

M&L for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and as directed.

M&L for rendering 10 mm thick on one side of lathing in cement mortar (1:6) and finished even and smooth (without using extra lime or cement) complete all as specified and as directed.

M&L for rendering 15 mm thick on other side of lathing in cement mortar (1:4) using water proofing compound in top layer complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately.

M&L for preparation of new plastered surface of walls etc and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered surface of ceiling etc and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered surface of walls etc and applying two coats of cement base paint over alkali resistant priming paint including complete all as specified and as directed.

M&L for preparation of new plastered surface of walls etc and applying two coats of distemper oil emulsion over a coat of primer including 3mm thick wall care putty complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of walls by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed.

M&L for preparing old plastered surfaces of walls by washing, rubbing down and scraping of existing distempering/painted surfaces etc and applying one coat of distemper oil emulsion complete all as specified and as directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall cornices by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of cement base paint (white or tinted) complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15 cm thick (below or above ground level) complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 (using 40 mm graded aggregate) as in surface channels and drains complete all as specified and as directed.

M&L for 75 mm thick, plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection/ hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand (1:2) complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed.

M&L for 40 mm thick plain cement concrete (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in sub base , finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 18 to 20mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick, screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for machine cut kota stone slab 18 to 20mm thick in riser of steps, skirting, dado, and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 10 mm thick, screed bed in cement mortar (1:4) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed

M&L for coloured glazed ceramic tiles of size 450X 350X 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match in vertical surfaces such as dado/skirting and facea of side bldg. including 10 mm thick backing coat of cement mortar (1:4) complete all as specified and as directed.

M&L for coloured glazed ceramic tiles of size 300X 200X 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles including 10 mm thick rendering of cement mortar (1:4) complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified and as directed

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed or bedding layer of cement mortar (1:4) for laying floor finishes complete all as specified and as directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

S&F for 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed.

S&F in repairs 75mm long butt hinges, medium weight, cold rolled miled steel fixed with chowkats complete all as specified and as directed.

S&F for 150 mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repairs 100 mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S&F for 150 mm size aluminium anodised handles, cast type complete all as specified and as directed.

S&F in repairs 150 mm size aluminium anodised handles, cast type complete all as specified and as directed.

S&F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F for 375 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F for 15 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete all as specified and as directed.

S&F for 20 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete all as specified and directed.

Supply and laying of 16mm of CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Supply and laying of 20mm of CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Supply and laying of 25mm of CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

S&F for 16mm outer dia, CPVC Brass thread elbow complete all as specified and as directed.

S&F for 20mm outer dia, CPVC Brass thread elbow complete all as specified and as directed.

S&F for 25mm outer dia, CPVC Brass thread elbow complete all as specified and as directed.

S&F for 16mm outer dia, CPVC Brass thread Tee complete all as specified and as directed.

S&F for 20mm outer dia, CPVC Brass thread Tee complete all as specified and as directed.

S&F for 25mm outer dia, CPVC Brass thread Tee complete all as specified and as directed.

S&F for 16mm outer dia, CPVC Brass thread union complete all as specified and as directed.

S&F for 20mm outer dia, CPVC Brass thread union complete all as specified and as directed.

S&F for 25mm outer dia, CPVC Brass thread union complete all as specified and as directed.

S&F for 16mm outer dia, CPVC ball valve complete all as specified and as directed.

S&F for 20mm outer dia, CPVC ball valve complete all as specified and as directed.

S&F for 25mm outer dia, CPVC ball valve complete all as specified and as directed.

S&F for 25mm outer dia, CPVC tank adopter complete all as specified and as directed.

Dismantling of water tank capacity exceeding 500 Ltrs and not exceeding 1000 Ltrs and removing to store complete all as specified and as directed.

S&F for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 liters hoisted and fixed in position all as specified in SSR Part-1 complete all as specified and as directed.

S&F for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 ltrs hoisted and fixed in position all as specified in SSR Part-1 complete all as specified and as directed.

S&F for 20 mm bore dia of pipe, Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20 mm - 210 gms) complete all as specified and as directed.

S&F for 20mm bore, gun metal gate valves with iron wheel head screwed both ends for iron pipes or for unions complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for RCC (1:2:4) type B1, (20 mm graded agg) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough finished flat surface of concrete complete all as specified and as directed.

S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F in repair 15 mm bore dia bib taps, chromium plated cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair 15 mm bore dia stop valves (concealed type), chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair 15 mm bore dia stop valves, chromium plated cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F for 15 mm bore dia angular stop cock/ stop valves, chromium plated cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair 15 mm bore dia pillar taps, chromium plated, cast copper alloy, fancy type, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S&F in repair brass chromium plated shower rose, 125 mm size with or without swivel joint any size including fixing to steel pipe or union complete all as specified and as directed

S&F in repairs soap dish vitreous china coloured approximate size (160mmx 160mm x 90mm) complete all as specified and as directed.

S&F for tubular towel rail, 20mm dia, D-type, 60cm long brass chromium plated between flanges complete all as specified and as directed.

S&F for PVC waste pipe of 32 mm size flexible and 1.2 mtr long, fitted to basin or sink complete all as specified and as directed.

S&F for PVC connections 15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.

S&F in repair PVC low level flushing cistern, 10 liter capacity, valveless, symphonic action type with inlet, ball valve, float and handle including bracket, PVC connection pipe and flush pipe of polyethylene of low or high density complete all as specified and as directed.

S&F in repair vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste chain and plug and porcelain stopper including cutting for and pinning in ends of brackets or erecting stand (exclusive of fixing of supply and waste pipe) complete all as specified and as directed.

S&F for vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

S&F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor using concrete (1:2:4) type B0 and to match with existing specifications complete all as specified and as directed. Make : Cat No. C0117 of Parryware/Hindware/Cera.

S&F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, complete but excluding flushing cistern & flush pipe including making good to existing surfaces complete all as specified and as directed. Make : Cat No. C0287/0288 of Parryware/Hindware/Cera.

S&F for health faucet cast copper alloy with push button flexible steel pipe with PVC lining of 1mtr long suitable for 15mm dia of pipe complete all as specified and as directed.

S&F for plastic water closet seat, black, closed pattern with recessed bottom and cover and mild steel chromium plated hinging device complete all as specified and as directed.

S&F for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed

M&L for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement including disconnection of old existing trap, and connected with existing water pipe complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

S&F for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F for 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F for 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.

S&F for 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

S&F for 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F for 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.

M&L for preparation newly or old decorated external surfaces of wall, chajja, facia etc by complete removing old paints by hand scrubber without disturbing the plastered surfaces broomed to remove all dust, direct and all loose scales of old paints and other foreign matter and applying two coats of water based acrylic weather proof exterior emulsion (Apex ultima superior quality) paint over a coat of primer as per manufacturer's instruction complete all as specified and as directed.

M&L for preparation newly or old decorated external surfaces of wall, chajja, facia etc by complete removing old paints by hand scrubber without disturbing the plastered surfaces broomed to remove all dust, direct and all loose scales of old paints and other foreign matter and applying one coats of water based acrylic weather proof exterior emulsion (Apex ultima superior quality) paint complete all as specified and as directed.

M&L for water proofing treatment on RCC roof etc. comprising with the following operation & as specified herein below:- (a)Taking down existing old tarfelt, bituminous compound including cleaning & removing debris to a distance exc 100 m n.exc.250m. (b) M&L 25 thick cement concrete type B0 1:2:4(12.5 mm graded aggregate) finished even and smooth. (c) M&L for 15 mm thick cement mortar in 1:4 finished even and smooth. (d) Preparing & cleaning of fully dried cement plastered surface. (e) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 litres per sum conforming IS-3384. (f) A layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.5 kg per sum reinforced with polyster non woven fabric (weighing not less than 160 gms/sum) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (g) One coat of aluminium paint over APP membrane @0.11Kg/Sqm. Note:- Prior to execution of the APP Membrane works, leak proof test shall be done by ponding water on roof slab to minimum depth of 25 mm. The entire roof slab shall be flooded with water for 48 hours. The necessary barrier shall be made to make feasible to stagnate water for 48 hours on roof slab.

M&L for boulder pitching, grouted with cement and sand mortar (1:6) complete all as specified and as directed.

M&L for clearance of area, digging of pit of size 0.60x0.60x0.60 meter, removal of debris, roots, etc. and refilling with good agriculture soil and well decomposit cattle manure in ratio 3:1, supply and planting of approved species of plant of healthy growth up with good root. ( height of plants shall not be less than 0.60 mtr ) complete all as specified and directed Note: (i) plant will be any of these - Ashoka, Aereka Palm, Coconut tree, Litchi, Gulmohar, Drumstick, Amaltas, massanda, Ponchetia, Cycus etc. (ii) The period of irrigation and weeding for the saplings shall be one years from the certified date of completion. The contractor shall be responsible for maintenance of the sapling during this period and any defects noticed in sapling during this period shall be made good by him at his own cost.

M&L for clearance of area, excavation upto 30 cm depth, removal of weeds debris if any, roots, etc. and refilling with good agriculture soil and well decomposed manure and sand ratio 3:1, and treating with antitermite treatment @ of 5 ltr/ Sqm using LINDANE / CHLOPHYRIOUS (EC-20) at plantation time and planting of normal doob grass complete all as approved and directed. Note: (i) The period of irrigation and weeding for the saplings shall be one years from the certified date of completion. The contractor shall be responsible for maintenance of the sapling during this period and any defects noticed in sapling during this period shall be made good by him at his own cost.

Taking down carefully aluminium/copper point wiring (light, fan, socket or power) including unserviceable light fittings, switch board complete, switch sockets, ceiling roses, pendants, regulators, sockets, etc and removing materials from site and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L for concealed point wiring complete with 1.5 sum FRLSH, PVC insulated unsheathed, multi stranded copper conductor single core cable 1100 volts grade, drawn into PVC casing caping and fittings, including 1.2mm thick pressed steel terminal switch boxes, 3mm thick bakelite sheet top cover(ISI marked) fitted with CP brass screw & washers including provision of PVC insulated FRLSH 1.5 sqmm copper conductor for earth continuity and connected to common earth dolly and brass washers etc. for one light/ fan point controlled by one number one way switch . Note : Cost of PVC casing caping, cover plate and box of suitable module, cutting chases of wall, making good disturbed wall surfaces including finishing with cement mortar (1:4), matching with existing colour/paint of surface are deemed to be included in the quoted rate.

All as per item No 145 above but for one 3 pin socket outlet, 5 Amps on Independent board.

All as per item No 145 above but for one 5 Amps, 3/5 pin socket outlet on the same board with other switches.

All as per item No. 145 above but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire for one 3 pin socket outlet, 5/15 Amps on Independent board complete all as specified and as directed.

S&F for switch piano, 5 Amp single pole, flush type one way 230 volts bearing ISI marked complete all as specified and as directed.

S&F for socket outlet, 2 in 1, 3 pin, 5 Amps, flush type bearing ISI marked complete all as specified and as directed.

S&F for switch socket combination, 2 in 1, 5 Amps, flush type, 240 volts bearing ISI marked complete all as specified and as directed.

S&F for switch socket combination, 2 in 1, 5/16 Amps, 240 volts, bearing ISI marked flush type complete all as specified and as directed.

S&F for ceiling rose, 3 phase/PVC/polycarbonate, isolated body bearing ISI marked and including PVC box complete all as specified and as directed.

S&F for bell push, 5 Amps, 240 volts, flush type complete all as specified and as directed.

S&F for call bell, AC, 230 volts, single pole complete all as specified and as directed.

S&F in repair lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F in repair LED bulb of 9 Watt complete all as specified and as directed. Make : Havells /Philips/Bajaj /Surya.

S&F for stepped type(five steps) electronic fan regulator flush type complete all as specified and as directed. Make : Model No. 14502 of Anchor or equivalent.

S&F in repair 9 Watt, surface and wall mounted LED Batten with polycarbonate housing and integrated complete all as specified and as directed. Make : Cat No LUMILINEBS9WLED865PCWH of C&S/ Philips/ Bajaj/ Havells.

S&F in repair 20 Watt, surface and wall mounted LED Batten with polycarbonate housing and integrated complete all as specified and as directed. Make : Cat No LTTB4F20WLEDEW BATTEN of C&S/Philips/ Bajaj/ Havells.

S&F for 36 Watt, recess mounted deep drawn CRCA housing with higher power LED seamless front frame with flat white height transmission acrylic cover complete all as specified and as directed. Make : Cat No DROPDOWNFLAT2X2PLR36WLED840S of Havells/ Philips/ Bajaj/ C&S.

S&F in repair sheet metal enclosure for MCB DB double door, single pole & neutral, 8 way, 240 Volt with common bus bar at incoming end complete all as specified and as directed.

S&F in repair sheet metal enclosure for MCB DB double door, single pole & neutral, 4 way, 240 Volt with common bus bar at incoming end complete all as specified and as directed.

S&F in repair MCB, TPN, 63 Amps, 240 Volts, 'C' Series, breaking capacity 10KA complete all as specified and as directed.

S&F in repair MCB, double pole, 6 to 32 Amps, 240 Volts, 'C' Series, breaking capacity 10KA complete all as specified and as directed.

S&F in repair MCB, SPN, 240 Volts, 6 to 32 Amps, 'C' Series, breaking capacity 10KA complete all as specified and as directed.

S&F in repair MCB, single pole, 6 to 32 Amps, 240 Volts, 'C' Series, breaking capacity 10KA complete all as specified and as directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth complete all as specified and as directed.

Taking down unserviceable sub-main wiring up to 10 Sqmm with rigid steel conduits /PVC casing-caping including cutting chases for taking out conduits and making good disturbed surfaces complete all as specified and as directed.

M&L for concealed sub main wiring with two run of 6 Sqmm (nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC conduit of suitable size, fixed to wall/ceiling etc including one run of 6 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets)

S&F in repair PVC casing caping of size 20-25 mm complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to 4mm GI wire by means of bolts and nuts checknuts and washers protected by 20mm bore galvanised iron light grade pipe, funnel with 40mm bore GI medium grade pipe for watering, wire mesh including concrete pit PCC 1:3:6 type C1, precast RCC 1:2:4 type B1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT steel bars @ 150 mm centre to centre in both direction and 10mm dia MS handle of suitable size, charchole or coke and salt in alternative layers, including necessary excavation and earth work in any type of soil, all as specified and shown in electrical plate no 3 of SSR part-1 complete all as specified and directed and tested on completion.

S&F for 25 Watt LED building security light new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07 complete all as specified and as directed. Make : Havells/Philips/Bajaj.

Taking down carefully serviceable ceiling fan/ exhaust fan / wall mounted fan deposited in safe custody, after repair work fix in original position after minor repair complete all as specified and as directed.

Taking down carefully serviceable energy meter deposited in safe custody, after repair work fix in original position after minor repair complete all as specified and as directed.

M&L for providing test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm, drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head screw including removing the existing old unserviceable complete all as specified and directed.

Supply laying and testing cable XLPE insulated , screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with standard aluminium conductor of size 10 Sqmm 2 core and testing, including brass compression cable gland, terminal lug, etc. complete all as specified and as directed.

M&L for sand cushioning (dry) in trenches for protection of UG cables (below, above and around the UG cable laid in trenches) of 23cm spread thick ness and consolidated (punned) upto 18cm thickness, complete all as specified and as directed. Note : For the purpose of payment, punned thick-ness of sand cushioning only shall be measured and paid for.

S&F for sub-class B brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for UG Cable protection complete all as specified and as directed.

S&F for thermoplastic polystyrene of IP-65, single phage metering cover wall mounted of size 217x 253 x 115 mm with transparent glass and necessary fixing nut, bolts, and clamp for installation of single phage energy meter complete all as specified and directed by Engineer-in charge. Note: quoted rate shall be deemed to all connections of respective energy meter at specific locations. Make : RAL 7035 of Hansel.