Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹34.8 LAccepted-AOC | 1 | Accepted-AOC Lowest bidder | |
| 2 | 2₹36.6 L+₹1.8 L (5.14%)Rejected-AOC 24 824 GOVERDHAN COLONY MAIN BHIND ROAD GOLE KA MANDIR | 2 | Rejected-AOC 2 | |
| 3 | 3₹38.4 L+₹3.6 L (10.3%)Rejected-AOC | 3 | Rejected-AOC 3 | |
| 4 | Rejected-Technical | - | Rejected-Technical Not Admitted due to revoke |
Tender Value
₹33 L
EMD Value
₹66,000
Closing Date
24 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TUGHLAKABAD
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
REPAIR TO FACIA, CHAJJA, COLUMN TO CERTAIN BLDGS AND OTHER MISC WORKS AT VAYUSENABAD AND REPAIR TO JOINERIES AT CERTAIN OTM, OMQ AND SMQ ACCN AND OTHER MISC B/R WORK AT VAYUSENABAD AF STN TUGHLAKABAD UNDER GE (AF) TUGHLAKABAD
2023_MES_611144_1
GE/TKD-09/2023-24
Open Tender
Civil Works - Others
Item Rate
180 days
GE (AF) Tughlakabad
MES contractor enlisted having deposited Standing Security with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
9 documents required · 9 mandatory
₹500
GE (AF) Tughlakabad
₹66,000
Yes
10 Oct 2023
28 Jul 2023
26 Aug 2023
4 Aug 2023
24 Aug 2023
10 Aug 2023
Amount
M&L for gunniting to RCC works in column, beams, slabs, chajja, facia, landing, balconies etc and patches by removing/ dismantling of RCC(loose concrete) including plaster and cutting of steel bar including plaster cleaning of surfaces with wire brushes and applying epoxy, paint anti corrosive coating of minimum 40-50 microns thick with sikatop Armatec 108 or Colusal VL of MC Bauchemie to rusted steel reinforcement after removing cleaning all rust and supply and fixing welded steel wire mesh 75mm x75mm with 4mm dia steel wire as facies/drops and similar works etc and expoxy based or other equivalent suitable bonding against treatment to be carried out on old concrete surface with Sikadur 32 of Sikka. Nito bond EP of fosroc or equivalent (as per manufacturers instruction) to bond old and new concrete mixing @ 2% by weight of cement polycrete and providing gunniting with a minimum pressure of 2 to 2.5 Kg sqcm and applying 25mm to 100 mm thick gunniting in cement mortar (1:2) (one part of cement and two part of ghaghar sand) with plastering(1:4) using ordinary port land cement of 43 grade over wherever required at any height, complete all as specified and directed by Engineer-in-Charge. Note:-(i) After placing the additional reinforcement all concrete surface shall be thoroughly scrubbing with. (ii) Additional reinforced TMT bars where incorporated in work and including 20mm thick cement plaster in 1:4 to be included in quoted rate. (iii) Work to be carried out as in patches as directed by Engr-in-charge. (iv) Rate for steel scaffolding as directed to be included in quoted rate. (v) All demolished material removed from MOD land completely.
M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified.
M&L TMT steel bars 6mm to 8mm dia and over cut to length bent shape required, including cranking bending binding with mild steel wire (annealed) not less than 0.9mm dia quality conforming to relevant IS complete all as specified.
Re-baring by drilling holes and fixing nozzle if required in existing concrete/brick work as in column, beams, slabs and foundation etc in any position and any description size of hole 14mm, 16mm & 22mm suitable for dowels of size 10mm, 12mm & 16mm respectively (minimum depth 140mm for 10mm & 12 mm dia bars and 180mm for 16mm dia bar, cleaning the surface properly with blow out pump & round brushes and fixing of dowel bars with epoxy resin (resin+hardner). Make: Sika, Fosroc or concressive 1450 of BASF complete all as specified and directed by Engr-in-charge. Note:- (i) Adequate lap length shall be provided as per IS-456-2000. (ii) Reinforced TMT bars where incorporated in work will be paid under item no 2&3. (iii) The work shall be carried out upto four storied building with scaffolding.
Taking down loose cement plaster on brick, stone walls and concrete surfaces(except above mention in description 1 area) of any description/position etc including racking out joints, hacking for keys scrubbing down with water etc complete all as specified and directed by Engr-in-charge.
M&L for 15mm thick (10+5) rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all specified.
M&L 5mm thick rendering in CM 1:3 on concrete/gunniting surface as in ceiling finished even and smooth w/o using extra complete all as specified and directed by Engr-in-charge
M&L preparing newly surfaces of ceilings and applying three coat of white wash on new surface all as specified.
M & L for cutting chases n. exc 10 cm girth in brick wall and making good in cement mortar 1:3 for embedding of GI sheet in wall complete as all specified and as directed.
S&F in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified(make jsw)
S&F rolled sections as in framing for clading, glazing and the like etc fixed with angle clips and connecting plates etc FE 410 W Gde E-250 quality B fixed with fastner all as specified.
M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.
Demolition of RCC of any descrition and in any position at any height not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition)
M&L cement concrete type B-0 12.5mm graded stone aggregate , in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing
S&F PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints fixed to walls
S& F PVC (SWR) bends 110mm dia any radius complete all as specified and as directed.
S & F in repairs of vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor.
S & F in repair of vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and as directed.
S & F in repair of Health Faucet with 1.5 mtr long SS tube and hook make :- Prayag/Jagaur/Volga
S&F in repairs of wash down water closet EWC floor mounting with soft close seat cover and twine flush cisturn fitting 520x360x390mm complete. Make : Cera, cat part No s1059102 P trap 100mm or equivalent
S & F in repair of PVC low level flushing cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make
S&F in repair of wash hand basin of size 550 x 400 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed.
S&F in repair of 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and as directed.
S&F in repair of 15mm bore chromium plated Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified.
S & F in repair of PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality
S & F in repair of 15 mm bore Angle stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified
S&F in repair of brass chromium plated shower rose 125 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified and as directed
S & F in repair of 15 mm dia bore concealed stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and as directed.
S&F in repair of brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges.
S&F in repair of CP soap tray fixed to walls with rubber plugs complete all as specified and directed.
S&F in repair of 15 mm dia bore bib taps cast copper alloy with crutch and butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.
S&F in repair of sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and as directed.
S&F in repair of 125mm dia grating doom with/without waste hole of PTMT (Minimum weight 40 gms)
S&F in repair of PVC bath room cabinet with mirror of size 432 mm x 311 mm complete all as specified and as directed.
S&F in repair of for 25mm dia fancy type PVC coated on MS Pipe coloured curtainrod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.
Taking up or down GI tubing /PPR pipe15 mm bore pipe all as specified and as directed.
Taking up or down GI tubing/PPR pipe 20mm bore pipe all as specified and as directed.
S&F in repair of GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified.
S&F in repair of GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
S&F in repair of non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm on vertical surfaces such as skirtings including 10 mm thick rendering in CM 1:4 etc complete all as specified.
S&F in repair of glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. Etc including 10 mm thick rendering in CM 1:4 complete all as specified.
Taking down shutters of any description exc. 1 sqm and n. exc. 2 sqm each and removing from site.
Taking down shutters of any description n exc. 1 sqm each and removing from site.
Easing of wooden door shutters/Almn door/PVC door shutter/Almn window (One unit shall comprising of one window/CB/Showcase/irrespective of number of leaves) for properly closing/opening tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc at any height.
Framed work 410-W (Gde E-250 )as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including hinges welding complete all as specified
Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wind ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0
M&L PCC 1:2:4 type B1 using 12.5 mm graded stone aggregate as in bed blocks etc for embedding hold fasts complete all as specified and directed by Engineer-in-Charge
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing
S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed by Engineer-inCharge.
S&F 35 mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats
S&F 2nd class HW 35mm thick local made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified.
S&F 25 mm thick flush shutter, ISI marked, solid core construction with block board core and plywood face panels commercial face panels, commercial type on both sides.all as specified.
M&L 2nd class hard wood Plain fillets, square, rectangular or triangular in section, clean sawn, secured with mills or brads, M & L exc 3 Sqcm and n exc 6 sqcm all as specified
S&F galvanised mild steel wire cloth of 0.56 mm nominal dia of wire and 1.18mm average width of aperature and fixed with beading tinned tacks or galvanized wire staples in steel/wooden window/door fixed with nails/welding complete all as specified.
S&F in repair galvanised mild steel wire cloth of 0.56 mm nominal dia of wire and 1.18mm average width of aperature and fixed with beading tinned tacks or galvanized wire staples in steel/wooden window/door fixed with nails/welding complete all as specified.
S&F in repair sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n.exc. 0.5 sqm in each pane .
S&F stainless steel butt hinges, medium weight of size 100 mm.
S&F in repair medium weight colled rolled butt hinges, medium weight of size 100 mm.
S&F 125mm stainless steel hasp and staple of safety type with mild steel hinge pin including bolt of hinge plate and fixed with screws.
S&F 150 mm long stainless steel barrel tower bolts of extruded section and fixed (ISI Marked).
S&F 100 mm long stainless steel barrel tower bolts of extruded section and fixed (ISI Marked).
S&F 250 mm long stainless steel sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of stainless steel (ISI Marked).
S&F stainless steel handles, fabricated type of size 150 mm (ISI Marked).
S&F stainless steel handles, fabricated type of size 100 mm (ISI Marked).
S&F 300 mm, mild steel, ordinary helicalsprings including roller and roller plate complete.
S&F Continuous (piano) hinges, stainless steel steel, bright finish or electrogalvanised
S&F factory made Ventilators 1.25 mm thick box type (primer coated) ERW hollow P sections of size 60mm X 25mm including grill using 10 Sqmm bar double riveted both gauge and glass shutter comprised gauged glazed skelton shutters ERW section 50mm X 20mm and 1mm thick with two openable leafs consisting 2 nos sash bar of T section 20mm X 3mm complete welded to frame with one vertical mullion of ERW box type T section of size 60mm X 25mm and 1.25 mm thick including cutting holes and making good dismanteled portion in PCC 1:2:4 type B1 four numbers of each window including following fittings welded to frame shutter :- (a) Hold fast, 150 mmlong of 12mmX3mm made to shape 04 nos per ventilator (b) handle of Z section 20mmX25mm, 100 mm long -per leaf (c) MS tower bolt 150mm long - 02 Nos per leaf (d) Z section 20mmX25mm, 100 mm long stopper -01 nos per leaf (e) Cleat 55mm long of hollow square 15mm X20mmX63mm welded to hinge -01 Nos per Leaf (f) MS pintal hinges of size 75mmX12mm- 02 Nos per leaf including stainless steel wire cloth, 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.40mm to 2mm and fixed with aluminium wire staples and glass pan 3mm thick fixed with MS pin and oil putty including two coates of synthetic enamel paint complete all as specified and directed NOTE :- (i) During fixing of ventilator surface shall be make good in plumb with existing finishes like cement plaster, similiar wall tile, floor tile etc and as per site requirement .
S&F factory made Steel windows 1.25 mm thick box type (primer coated) ERW hollow P sections of size 60mm X 25mm including grill using 10 SQmm bar double riveted both gaze and glass shutter comprised gauged glazed skelton shutters ERW section 50mm X 20mm and 1mm thick with two openable leafs consisting 2 nos sash bar of T section 20mm X 3mm complete welded to frame with one vertical mullion of ERW box type T section of size 60mm X 25mm and 1.25 mm thick including cutting holes and making good dismanteled portion in PCC 1:2:4 type B1 four numbers of each window including following fittings welded to frame shutter :- (a) Hold fast, 150 mmlong of 12mmX3mm made to shape 04 nos per window (b) handle of Z section 20mmX25mm, 100 mm long -per leaf (c) Mild steel tower bolt 150mm long - 02 Nos per leaf (d) Z section 20mmX25mm, 100 mm long stopper -01 nos per leaf (e) Cleat 55mm long of hollow square 15mm X20mmX63mm welded to hinge -01 Nos per Leaf (f) MS pintal hinges of size 75mmX12mm- 02 Nos per leaf including stainless steel wire cloth, 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.40mm to 2mm and fixed with aluminium wire staples and glass pan 3mm thick fixed with MS pin and oil putty including two coates of synthetic enamel paint complete all as specified and directed NOTE :- (i) During fixing of window surface shall be make good in plumb with existing finishes like cement plaster, similiar wall tile, floor tile etc and as per site requirement .
Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0
M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer.
S&F of 150 mm floor door stopper of aluminium alloy body and tongue andodised with hard drawn steel spring fixed in floor
S&F 40 mm dia cupboard knobs fixed with nut svrew and washer of mild steel bright bolt.
Supply and fixed in repairs of 150 mm aluminium handles cast type anodised.
Supply and fixed in repair of 300 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
M&L for welding in repairs n. exc. 2.5 cm in length, thickness of metal to be welded n. exc. 6 mm.
S&F Aluminium powder coated aluminium frame for doors , windows, ventilators, partion wall with one or more rebates including joining cleat for fixing etc completet all as specified. (thikness of powder coating is 40 micron)
S&F aluminium powder coating of any colour (Thickness of powder coating not less than 50 micron) window and ventilator shutter side hung type without sashbar, aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No complete all as specifiedhandles 2 Nos in each door, hinges, aluminium snap beading screws complete all as specified.
Repairs to Aluminium doors n exc 1.50 Sqm by necessary joining cleat, glazing clips, rubber neoprene packing handles 2 Nos in each doors, hinges anodised aluminium snap beading scrw etc and refix in the same opening after complete repair except glass
S&F in repairs , Aluminium door closer hydraulically regulated, designation No 1, universal type suitable for door shutters upto 700 mm in width and of of wt not more than 35 kg.
S& F 18 mm solid PVC ply of 1st quality of approved colour and fixed with screw, solvent cement/adhessive complete all as specified and directed by Engineer-in-charge.
S& F 18 mm solid PVC ply of 1st quality of both side white colour fixed with screw, solvent cement/adhessive complete all as specified and directed by Engineer-in-charge.
S& F 12 mm solid PVC ply of 1st quality of both side white colour fixed with screw, solvent cement/adhessive complete all as specified and directed by Engineer-in-charge.
S&F in repair 8 mm thick sheet glass shelf assembly with Stainless steel backets as approved of size not exc. 0.25 Sqm
S&F brass Locks for cupboard/Glass doors, grade I, size 50mm
S&F Magnetic catcher for Wardrobe, Cub-boards Etc.
S&F sliding channels for holding glasses in wardrobes
S&F stainless steel Pivot hinge of size not exc. 75 mm for glass doors complete all as specified and directed
S&F in repairs double action floor spring hydraulically regulated made up of of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed
Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site all as specified and directed.
Demolition of cement concrete (Unreinforced) in ground floor & paving n exc 15 cm thick (below or above ground level).
M&L for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate).
M&L for Cement concrete Type B2 1:2:4 (using 40 mm graded aggregate) in foundations, filling and mass-concrete.
Supply and fixing in repairs 7mm thick aluminium grill of make ' Deco grill DG-104 model fitted in to suitable aluminium channel and fixed to windows / ventilators including channel complete all as directed by Engr-in-charge.
S&F in repairs stainless steel curtain rod of dia 20-25 mm complete as approved.
S&F Stainless steel bracket for holding curtain rodes of dia 20-25 mm as approved
Taking down hood of rolling shutter of size exc 6 sqm but n exc 16 sqm each by making all arrangment like ladder, staging rope, chain & pulley etc carrying out repair works, including replacmeent of nut bolts & Nails etc replacing defective parts, oiling greasing the mechanical parts including side rails and refixing the same in position and repairing the damaged cemented masonary/concrete to match with the old structure complete all as specified and directed.
S&F in repair Ball bearing for rolling shutter as per site requirement complete all as specifeid and directed.
M&L for the old roof by making the surface clean throughly wire brushed washed, dried up and clean complete all as specifeid and directed.
Cleaning of roof slab/chajja with sweeping with brooms, removing complete all as specified and directed by Engr-in-charge.
Taking down old existing roof treatment of any type including mud fuska and at any deapth removing from MoD Land complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete of any type description and in any position complete all as specified and directed by Engr-in-charge.
Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3) complete all as specified and directed by Engr-in-charge.
Brushing neat cement slurry with 3kg of cement per Sqm complete all as specified and directed by Engr-in-charge.
M&L for min 25mm thick cement concrete (1:2:4) type B-O using 12.5 mm graded stone aggregate in padding finishing surface of concrete topping even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L for 10mm thick plastering in CM (1:3) on green concrete roof surfaces Sqm with water proofing compound @ 3% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. Note - WPC shall be measured and paid separately.
Supply only integral water proofing compound ISI Marked complete all as specified and directed by Engr-in-charge.
M&L for Providing cement concrete (1:3:6) Type C0 using 12.5 mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified
M&L for roof top surface for roof treatment using application of water proofing treatment by authorised applicatior complete all as specified and directed and comprising of the following :- (a) preparation of roof top surfaces and clearing of the dust an loose material by brush/blower/grinder including ramoving of vegatation/plantation from the surface and providing and aaplying single component elastic cold applied poluurethene modified acrylic roofing system, co-elastic technology (CET) based on modified polurethene and fully reinforced having sun refiectivity index (SR) of 109 on top of concrate roof surfaces. (b) All cracks up to 3mm at corner joint, channel and parapets should be treated with crack seal. (c) Applying three coats includign one coat of primer of polyurathene memrane having converage @ min .75kg/Sqm and dulution up to 10% and laying rainfored fibemet and applying two coats of polyurathene membrane @ total consumption 2kg/smq in two coats for maintaning dry fim thickness 1.5mm and elongation at break of free film of approx 350%. (d) The materials shall be applied with brush or roller. complete in all respect as per the direction of Engineer-in-Charge/Consulatant (Note :-6Hrs interval between two coat shall be maintained) (e) All auxilary and accessories involved during application should be supplied by single manufacturer as a part of system
Dismantling of existing water tank (PVC/RCC/AC) exc 500 ltr but n exc 1000 ltr capacity and removing from site to store yard complete all as specified and directed by Enar-in-charge.
Dismantling of existing water tank (PVC/RCC/AC) exc 250 ltr but n exc 500 ltr capacity and removing from site to store yard complete all as specified and directed by Engr-in-charge.
S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball PTMT valve high pressure with polyethylene float and fly nut complete all as specified and directed by Engr-in-charge.
S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball PTMT valve high pressure with polyethylene float and fly nut complete all as specified and directed by Engr-in-charge.
Demolition and breaking of AC pipe set in cement mortat 150 mm dia complete all as specified and directed by Engr-in-charge.
S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall of 160 mm dia complete all as specified and directed by Engr-in-charge.
S&F for PVC (SWR) bend of 160 mm dia complete all as specified and directed by Engr-in-charge.
All as per item No 117 but 15mm bore pipe complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete is reinforced (reinforcement) cut as required to facilitate demolition) In Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified and directed by Engr-in-charge.
Form work to sides & soffits of beams, lintels, shelves, cantilevers, overhangs etc with flat rough finished surfaces of concrete complete all as specified and directed by Engr-in-charge.
M&L for TMT bars 10mm dia and over, cut to length bent to shape required incl crancking, bending spirally for hooping for columns, hooking ends, drilling holes in existing walls/slabs and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conf to TMT bar complete all as specified and directed by Engr-in-charge.
M&L for RCC (1:2:4) type B1 by using 20 mm graded stone aggregate in Chajjas complete all as specified and directed by Engr-in-charge.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed by Engr-in-charge.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete (Unreinforced) in ground floor & paving n exc 15 cm thick (below or above ground level) complete all as specified and directed by Engr-in-charge.
M&L for 100 mm thick Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base floor complete all as specified and directed by Engr-in-charge.
M&L for machine pressed coloured rubberisd moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 to 60 mm thickness M-35grey cement and pigment including laid over 25 mm thick layer of sand cushioning complete all as specified and directed by Engr-in-charge.
M&L for preparation of old surfaces including complete removal of old existing treatment of wall surfaces and applying one coat of white cement base wall care putty 2 mm thick on walls finished even and smooth with sand paper and applying two coats of OBD over a coat of primer complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of walls. ceiling, chajja by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc, washing rubbing down and stopping of previously untreated/painted surfaces and applying one coat of cement base paint, white or tinted all as specified and as directed by Engineer-in-Charge. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height.
M&L for removal of old existing treatment of walls surfaces and applying a coat of white cement base wall care putty in patches as required and as directed by Engr-in-Charge finished even and smooth with sand paper and applying one coat of exterior weather proof water base emulsion paint (APEX)in white or tinted complete all as specified & directed. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height.
M&L for preparation of old painted wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified and as directed by Engineer-in-Charge. .
M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint.
M & L 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate surface finished even and smooth using extra cement as in flooring complete all as specified and as directed.
Supply only 3 mm thick and 38 wide glass dividing strip complete all as specified and as directed.
M&L 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection/ path laid in panel surface finished even and fair complete all as specified and as directed.
M&L 20 mm granite slab for service counter and platform over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including making good the edges complete all as specified and as directed.
S&F PVC floor trap size 75 mm dia outlet with grating including connection to waste pipe with cement joint including taking down existing trap complete all as specified and as directed .
M&L preparing new surfaces of walls and applying two coat of Oil bound distemper on new surface all as specified.
S&F in repair colored polycarbonate sheets 6mm thick (multi wall) as in roof coverring /cladding to wall, fixed with self tapping screws complate all as specified and directed by Engineer-in-Charge
M&L rendering 15mm thick wall plaster in CM 1:3 mixed with water proofing compound complate all as specified and directed by Engineer-in-Charge
M&L for wire bushing and cleaning top surface of tiles, cement concrete, including flashings and junctions of parapats etc and surface painting with a layer of blown grade bitumen of 85/25 penetration grade @1.70Kg/Sqm and lightly tempered to the surface of roof or sunken etc complete all as specified.
M&L for PCC 1:5:10, type E-2 as in filling sunken floors etc complate all as specified and directed by Engineer-in-Charge
Notes: 1. All works to be carried out up to Approx 15 mtr height. Rates included to the necessary steel scaffolding required for execution of works upto Approx 15 mtr height from ground floor and disposal of all demolished material from out side the MOD land. 2. The work will be scatted in nature various buildings according to site requirement and as directed by Engineer-in- Charge.
ANAND ENTERPRISES
M/S S.K.Electricals
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .