Repair / Renovation of Resin Hut Sangaldan of Range Office Gool, Ramban Forest Division for the Year 2022-23 Under CAMPA (NPV).

Amount

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of G.S. Sheet. including all cost and carriages.

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead of sectional area 40 sqcm. and above . including all cost and carriages.

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: in cement mortar. including all cost and carriages.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil. including all cost and carriages.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size) including all cost and carriages.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand). including all cost and carriages.

Fixing trusses/purlins /rafters/posts/ post-plates or like components/ ceilings including cost of screws etc. complete Kail/deodar wood (wood provided by forest department) including all cost and carriages.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.50mm thick sheet complete. including all cost and carriages.

Providing and fixing Ridges or hips of width 60 cm plian G. S Sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia, all complete. 0.50 mm thick. including all cost and carriages.

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand) including all cost and carriages.

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) including all cost and carriages.

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm ominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand). including all cost and carriages.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). including all cost and carriages.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more (To be paid as per actual). including all cost and carriages.

Centering and shuttering including strutting, propping etc. and removal of form work for:Suspended floors, roofs, landings, balconies and access platforms septic tank slab. including all cost and carriages.

Centering and shuttering including strutting, propping etc. and removal of form work for:Edges of slab under 20cm wide. including all cost and carriages.

Providing and laying Vitrified floor tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm. including all cost and carriages.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In colour such as White, Ivory, Grey, Fume Red Brown. including all cost and carriages.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. including all cost and carriages.

Providing and fixing 40 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including black enamelled M.S. but hinges with necessary screws excluding, panelling which will be paid for separately. Deodar/ Kail wood (wood provided by forest department) labour rate. including all cost and carriages.

Providing and fixing 30 mm thick glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Deodar/ Kail wood (wood provided by forest department) labour rate. including all cost and carriages.

Providing and fixing 30mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Deodar/ Kail wood (wood provided by forest department) labour rate. including all cost and carriages.

Providing & fixing in position 4mm thick glass panes, with wooden fillets incl. screws in wooden doors, windows, cleestory windows, all complete with. including all cost and carriages.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on old work (two or more coats) over and including priming coat with water thinnable cement primer. including all cost and carriages.

Finishing walls with water proofing cement paint of required shade on old work (two or more coats applied @ 3.84 kg/10sqm) including all cost and carriages.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on new work including all cost and carriages.

Actual carpenter engaged for framing of wooden Almirah/ wardrobes for Bed Room & Kitchen, and Bed, repair of door windows, new door/ windows frames, ceilings, wooden railing in verandha tc (wood provided by forest department) subjected to actual including all cost and carriages.

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete: 250x10 mm including all cost and carriages.

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete: 100x10 mmincluding all cost and carriages.

Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete 250x16 mm including all cost and carriages.

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete:- 125 mm including all cost and carriages.

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete:- 100 mm including all cost and carriages.

Providing and fixing aluminum Eye Hook Latch, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete including all cost and carriages.

Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid,10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied:W.C. pan with lSI marked white solid plastic seat and lid. (Hindware/Jackware/Cera/Euro/Periware/Mok & Dek) including all cost and carriages.

Providin and fixing 8 mm dia CP/SS jet with flexible tube upto 1 m long with SS triangular plate to European type WC of quality and make as approved by Engineer- in - charge (Hindware/Jackware/Cera/Euro/Periware/Mok & Dek) including all cost and carriages.

Providing and fixing 600x450 mm bevelled edge mirror ofsuperior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.including all cost and carriages.

Providing and fixing PTMT towel rail complete withbrackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. (Hindware/Jackware/Cera/Euro/Periware/Mok & Dek) including all cost and carriages.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distance of 37mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.(Hindware/Jackware/Cera/Euro/Periware/Mok & Dek) including all cost and carriages.

Providing and fixing PTMT liquid soap container 109 mmwide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Hindware/Jackware/Cera/Euro/Periware/Mok & Dek) including all cost and carriages.

Providing and fixing C.P brass long nose bib cock of approved quality confirming to IS standards and weighing not less than 810gms:- 15mm nominal bore. (Cera/ Jaquar/Essess/Resp./Euro / Marck). including all cost and carriages.

Providing and fixing C.P brass stop cock (concealed) of standard design and of approved quality make confirming to IS: 8931:- 15mm nominal bore. Cera/ Jaquar/Essess/Resp./Euro / Marck). including all cost and carriages.

Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:550x400 mm with single 15 mm C.P. brass pillar taps (Hindware/Jackware/Cera/Euro/Periware/Mok & Dek). including all cost and carriages.

Providing and fixing C.P brass close hole basin mixer pillar tap of aproved quality make, weighing not less than 1.97 kg: 15mm nominal bore. Cera/ Jaquar/Essess/Resp./Euro / Marck) including all cost and carriages.

Providing and fixing PTMT grating of approved quality andcolour.Circular type 100 mm nominal dia.including all cost and carriages.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. including all cost and carriages.

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete. Flexible pipe 32 mm dia. including all cost and carriages.

Providing and fixing C.P. brass angle valve for basin/ wall mixer and geysers points of approved make conforming to IS : 8931 15 mm nominal bore of make hindware/Cera/Jaquar or as approved by site incharge (With all Carriages). including all cost and carriages.

Providing and fixing in position C.I manhole cover and frame of required shape and approved quality. Rectangular shape 600x450 internal dimension. including all cost and carriages.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall medium15 mm dia. nominal bore. including all cost and carriages.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall medium20 mm dia. nominal bore. including all cost and carriages.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall medium25 mm dia. nominal bore. including all cost and carriages.

Providing and laying in position, vertically and horizontally selfit/ ringfit SWR PVC pipes (45kg/sqcm) as per IS: 13592 with leatest ammendments, incliding jointing and with SWR moulded fittings, using solvent cement to form a pavement water tight joint. Finolex/ supreme/Prince or equivalent make (finished item to be measured and paid for vertical pipes to be ancassed with wire chiken mesh) finolex/supereme/Prince or equivalent make. A) 75 mm (3") dia. including all cost and carriages.

Providing and laying in position, vertically and horizontally selfit/ ringfit SWR PVC pipes (45kg/sqcm) as per IS: 13592 with leatest ammendments, incliding jointing and with SWR moulded fittings, using solvent cement to form a pavement water tight joint. Finolex/ supreme/Prince or equivalent make (finished item to be measured and paid for vertical pipes to be ancassed with wire chiken mesh) finolex/supereme/Prince or equivalent make. B) 110 mm (4") dia.including all cost and carriages.

Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. A) Plain bend 75mm (3") dia. including all cost and carriages.

Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. B) Plain bend 110mm (4") dia. including all cost and carriages.

Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. C) Door bend 75mm (3") dia. including all cost and carriages.

Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. E) Door bend 110mm (4") dia. including all cost and carriages.

Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. F) Plain Tee 75mm (3") dia. including all cost and carriages.

Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. G) Plain Tee 110mm (4") dia. including all cost and carriages.

Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. H) Vent Cowl 75mm (3") dia. including all cost and carriages.

Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. I) Vent Cowl 110mm (4") dia. including all cost and carriages.

Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. K) Reducer 110mm x 75mm (4"x3") including all cost and carriages.

Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. L) Coupler 75mm (3") including all cost and carriages.

Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. M) Coupler 110mm (4") including all cost and carriages.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including all cost and carriages.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sqm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch modular plate suitable G.I Box and earthing the point with 1.5 sqm FRLS PVS insulated copper conductor single core cable etc. as required (GROUP C) incl MCB etc all complete including all cost and carriages.

Wiring for heating point with 4.0 sqm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch modular plate suitable G.I Box and earthing the point with 4.0 sqm FRLS PVS insulated copper conductor single core cable etc. as required (GROUP C). all complete incl MCB including all cost and carriages.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete including all cost and carriages.

MOHD FAROOQ CHANDIAL CONTRACTOR

PALVI BHUTYAL