Renovation and furnishing of Data Centre

Amount

Dismantling work

Dismantling of Cement concrete grade M-15 & M-20 including T & P and scaffolding wherever necessary, sorting the dismantled material , disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 meters as per direction of Engineer-in-Charge..

Dismantling Brick/Tile work in cement mortar incluiding T & P and scaffolding wherever necessary, sorting the dismantled material , disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 meters as per direction of Engineer-in-Charge..

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

Dismantling aluminium/ glass partition wall, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 1 K.M initial lead, for all leads including all lifts involved.

Civil work :

Supplying and painting of internal walls and ceiling with two or more coats of acrylic emulsion paint which includes two coat of internal putty with a coat of primer all complete. The shade and brand to be of approved brand & shade over the surfaces including preparation of surface, with cost of all materials, labour, conveyance taxes of all materials,scaffolding etc., as per the direction of the Engineer-in-charge.

Fixing vitrified tiles (600mm x 600mm) in floors treads or steps and landing on 25mm thick bed of cement mortar 1 :1 (1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete as per direction of engineer in charge.

Fixing vitrified tiles (600mm x 600mm) in dados skirting and risers of step on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete as per direction of engineer in charge.

Fixing Anti-skid Ceramic tile (300mm x 300mm) in floors treads or steps and landing on 25mm thick bed of cement mortar 1 :1 (1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete as per direction of engineer in charge.

Providing and fixing 1st quality ceramic glazed wall tiles of approved make of 5mm and size 450 mm X 300 mm conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete as per the direction of the Engineer-in-charge.

Providing 18 mm thick approved quality & shade polished granite slabs, and cutting to required size laid over 20 mm thick under layer of cement mortar (1:3) to masonry or concrete surfaces in skirting, dado, risers and treads of steps, counters, edtges / facias complete (screwing on vertical surfaces if required) to proper level and joints filled with cement mixed with oxide matching colour in required proportion, washed, acid cleaned, including cost of all materials, labour, conveyance, taxes, royalties, scafflding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat including 2 coats of Enamel paint and one coat of wood primer fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge) , minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with m.s hold fast/ lugs/ SS dash fastner of required dia & length complete as per the direction of engineer-in-charge. Frame size 50 x 125 mm, Make: Black cobra/ SNG/ Kit ply

Providing and fixing 30 mm thick factory made single extruded WPC (Wood polymer composite) solid plain flush door shutter of required size fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all complete as per direction of engineer in charge. Make: Black cobra/ SNG/ Kit ply

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Supplying and fixing 35mm thick Decorative Flush Door shutter finished with 4mm thick decorative veneer on one side of the shutter including melamine polish,groove design and otherside finished with 1mm thick decorative laminate, 35 X 6 mm teakwood beading all round the edges etc., all complete as per the direction of Engineer-in-charge.

FITTING AND FIXTURES FOR DOORS

(i) SS Handle (25 x 450mm ) Make : Godrej or equivalent 724 SS304 Pull handle - D-Type (25 dia. X 450 mm) 2805 31162801SD00515

(ii) SS Handle (200mm ) Make : Godrej or equivalent. Model no : 506 Fawn Mini Hdl AB 200 mm (New) 4612 46171598SD01359

(iii) SS Handle (200mm ) Make : Godrej or equivalent Model no : 507 Fawn Mini Hdl SS 200 mm (New) 4613 46171598SD01360

(iv) Chromium plated Brass mortice latch and lock 100x65 mm with6 levers and a pair of brass lever handles Make : Godrej or equivalent model no : 388 240 mm Door Handle set with Lock Body 2C 6059 46171598SD00606

(v) SS 304 tower bolt (200mm) Make : Godrej or equivalent model no : 571 Designer Towerbolt 200mmx10mm (8) 2732 31161606SD00150

(vi) SS 304 tower bolt (150mm) Make : Godrej or equivalent Model no : 570 Designer Towerbolt 150mmx10mm (6) 2731 31161606SD00149

(vii) SS 304 door stopper Make : Ozone or equivalent Model no : OZ-DST-55E STD SN

(viii) Door closure Make : Godrej or equivalent Model no :NSK-980 E TA Light Grey OVERHEAD DOOR CLOSER (TRACK ARM)

(ix) SS 304 hinges (125mm) Make : Godrej or equivalent Model no : 558 SS304 Hinge 125x75x2.5mm 2 Ball Bearing (5x12) 2705 31162403SD00312

(x) Aldrop (10") Make : Ozone or equivalent Model no : OZ-ALD-02 16*250mm

P.H Installation :

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. Make : Hindware or equivalent E.W.C : Model no : 92503 Cistern : Sleek fresh PVC

Providing and fixing white vitreous china flat back half stall urinal with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. Make : Hindware or equivalent Model no : Urinal Dyna with BI, Urinal Auto flush cock Cat. No.: F860045

Supply all materials and labour for fitting and fixing of following size white glazed vitreous china wash hand basin with pedestal & pillar cock of approved make in all floor of approved quality including cutting the walls & floor and making good the damages with cement concrete etc. including transportation etc. all complete excluding GST as per direction of EIC. Make : Hindware or equivalent Wash basin Model no : 91008, Pedestal model no : 11029, Pillar cock model no : F440001

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 MM dia Flexible pipe

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Model no :Jaquar or Equivalent (AKP-CHR-35795)

Providing and fixing stainless steel jali (grating) with or without hole for waste pipe for floor / Nahani trap. Make : Supreme

(a) 100 mm dia. weight not less than 100 gms.

(b) 75 mm dia. weight not less than 100 gms.

Providing, fitting and fixing of health faucet confirming to IS : 8931 of approved make. Make : Hindware or equivalent Model no : F160001

Providing of following C.P. brass toilet accessories in toilets of approved make.

(i) 32 mm dia C.P. brass waste coupling for wash basin. (Hindware Cat. No.:- F850002)

(ii)toilet paper holder. (Hindware Cat. No.: F890003)

(iii) 600x120x5 mm glass shelf (Hindware Cat. No.: F880010)

(iv) C.P. brass bib cock (Hindware Cat. No.: F520004)

(v) C.P. brass angular stop cock with 15 mm nominal bore (Hindware Cat. No.:- F720005)

(vi) Towel rail 600 mm (Hindware Cat. No.: F880005)

(vii) Recessed Soap dish (Hindware Cat. No.:- F890005)

(viii) Towel ring (Hindware Cat. No.: F880007)

Furnishing work :

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 6.0 mm thickness (weight not less than 10kg/sqm)

Providing and Fixing ‘THERMOFRIZ’ wood wool panels made of Wood Fibre 1mm width Magnesium composites 15mm thick Natural Standard as per the choice of the Architect/ person in charge of size 1220 X 610 mm . Has excellent noise absorption as per ISO: 354-1985 and ASTM 423-90 a, Density 400 Kg/ m3, meets stringent Fire Ratings ASTMD-876 and Fire Class - 1 as per BS 476 part 5 and 6,Class P-not easily ignitable as per BS-476-Part 5 (Ignitability for material).This is applicable for core and class 1 as per BS 476-Part 7 (Method for classification of surface spread of flame) , weather resistance as per IS 3308, Thermal Insulation as per IS:3346 with relative humidity of 90% RH at 60o Celsius(140o Fahrenheit) for 15 days= No deterioration. Conforms to En 13168 and are RoHS Complaint. Can be installed screw fixed on GI metal stud of size 48mm & 0.55mm thick having one flange of 34mm & other 36mm placed at 610mm c/c vertical into 50mm floor & Ceiling channel of 0.55mm thickness having 2 equal flanges of 32mm each, then fixing GI metal stud at 610mm c/c horizontally making a grid of 610 x 610mm c/c. Panel will be backed with 50mm 48kg ROCKWOOL. Fab stretch system : includes screw fixed 13mm PVC grippers (Full wrap/Center/half wrap) @200mm on Thermofriz acoustic panels 15mm will be covered with Glasswool Board 100Kg density 25mm thick, and gripper will be installed vertical / horizontal with proper line & level over 50 x 10mm Wooden strips. FABRIC will be stretch inside the grippers.

WALL CLADDING WITH VENEER :Supplying and fixing of wall cladding with 12mm. ply fixed to 19mm. Block board frame of 600 x 600 mm interval surface finished with 4.0 mm thick veneer with melamine polish of approved shade and teakwood beading as per drawing and design etc all complete as per instruction of Engineer in - charge.

Supply of Luxalon U Baffle Linear aluminum panel false ceiling system as manufactured by Hunter Douglas India Pvt. Ltd. (Shade – as per Luxalon Interior Color Chart).The system shall consist of Box shaped Panel 50mm wide X 100mm deep X 0.6mm thick in standard length of 1 meter – 4 meters. The Panels shall be coil coated on a continuous paint line, double baked & formed from stove enameled corrosion resistant aluminum alloy for higher strength & good roll forming characteristics. Panels shall be clipped to an enameled & roll formed Fe panel carrier of 62mm wide X 39mm deep X 0.5mm thick in standard length of 5 meters. The panel carrier shall be double baked & roll formed from enameled corrosion resistant aluminum alloy in Black color with cut outs to hold the panels in modules of 150mm to provide a 100mm gap between 2 panels respectively. The first carriers shall be fixed at a distance of 150mm from the Wall & thereafter at 1.3 meters c/c. The carriers shall be suspended from the roof by 6mm diameter G.I. threaded suspension rod. The rod hangers shall be fixed at a distance of 150mm from the edge & thereafter at 1.2 meters c/c. The G.I. suspension rods shall be fixed to the roof using metal fasteners. Wherever required, two panels will be coupled horizontally with panel splice & similarly for carriers, carrier splice shall be used. In case of a floating ceiling design, the panel ends shall be closed using suitable PVC end caps. For 150mm Module 50mm width X 100mm Height

Supplying and fixing of Wooden Flooring is beautiful, warm, redish brown in colour with a gorgeous natural colour variation along with proper unilin locking system ans surface coating of PU & UV coating form TREFFERT (Germany) dimentions of 450 mm Length, 75mm to 95 mm breadth and thickness of 18mm of approved shade and as per drawing and design etc all complete as per instruction of Engineer in - charge. Base Price of Wooden Planks - Rs 800/sqm

ARCHITRAVE : Supplying and fixing of 19 mm Block Board all around the door frame, as per drawing and specification including labour all complete and as per the direction of Engineer-in-charge. Upto 250 mm

Supply and applying of Duco Paint with PU finish over ply wood / WCP surface after proper surface preparation as per drawing and specification including labour all complete and as per the direction of Engineer-in-charge.

WALL HUNG PAINTINGS: Supplying, fitting and fixing of wall hung abstruct/realistic canvas paintings of size(22" x 30") with acrylic colour with mount and glass and 1 1/2" fibre frame(mahogany colour) in specified areas all complete. The rate including cost of all materials with taxes, royalities, transportation, loading, unloading, sundries, T&P, labours etc. all complete and as per the direction of Engineer-in-charge.

ROLLER BLINDS : Supplying and fixing of roller black out blinds of approved colour and make at specified area made of 100% Polyster with a weight of 255g/sqm / 210g/sqm(+_5%),fabric thickness of 0.60/0.33 mm(+_0.05) in required width over windows.The hanging properties of blinder should be of excellent quality and of very high tearing strength with acrylic coating resistant to cracking and fraying ,conditionally cleanable with a damp cloth. The cost including of all materials, labours, T&P, taxes, royalities, transportation etc. all complete as per the direction of Engineer-in-charge. System - SF38, Model - Twilight. Make : Hunter dauglas

FLOWER VASE : Providing of metal,wooden and glass flower vase in specified areas.The cost including of all materials, labours, T&P, taxes, royalities, transportation etc. all complete as per the direction of Engineer-in-charge.

FURNITURE

RECEPTION TABLE (1800mm x 600mm x 750mm) : Supplying and fixing of table with specified size shall made out of 19 mm B.W.R. block board as top,vertical modesty and shutter and side which is to be finished with1 mm thick approved shade laminate on exposed surface. with drawers, key board, open able shutters etc.,edge cover with teak wooden beading with melamine polish. All unexposed block board surface shall be finished with chalk polish and 12 mm thick beveled edge glass, fixed with 150 mm x 25 mm SS stud over the table top using necessary stainless steel stud as per detail drawing The cost including of all materials, labours, T&P, taxes, royalties, transportation etc. all complete as per the direction of Engineer-in-charge

RECEPTION CHAIR: Supplying of High back with fabric upholstery,polyureathene foam for Receiption having pneumatic seat height adjustment,center tilt synchronous mechanism and upright position locking system etc., all complete and as per the direction of Engineer in charge. Model - ASTRO MBGS ADJ ARMS, Make - Featherlite

SOFA : Providing of sofa of required size shall be made out of fabric finished with approved quality upholstery over 100 mm thick H.D.P.U.Cushion all complete including all labour,material,hard ware adhesive and as per the direction of Engineer-in-charge.

MEETING TABLE (3600mm x 1050mm x 750mm) : Supplying and fixing of conference table made out of 19mm Block Board top, vertical modesty with necessary teak wood beading all around. The exposed surface finished with 4mm thk. veneer with melamine polish,40 mm teak wood moulding fixed to the edges all complete as per detail drawing. The cost including of all materials, labours, T&P, taxes, royalties, transportation etc. all complete as per the direction of Engineer-in-charge. Base Price of Veneer - Rs. 2000/Sqm

HEAD CHAIR: supplying of High back with headrest leather, polyureathene foam chairs for Conference Head Chair having pneumatic seat height adjustment,knee tilt synchronous mechanism and five position locking system etc., all complete and as per the direction of Engineer in charge. Model - ASTRO MBGS ADJ ARMS WITH HEAD REST, Make - Featherlite

MEETING CHAIR: Supplying of mid back with leaterite,polyureathene foam for Conference having pneumatic seat height adjustment,knee tilt synchronous mechanism and four position locking system etc., all complete and as per the direction of Engineer in charge. Model - Contract Project MBGS ADJ ARMS, Make - Featherlite

REVOLVING CHAIR : Supplying and fixing of seat - The Seat is made up of 1.2 ± 01cm. thick hot pressed plywood upholstered with fabric or synthetic leather and moulded polyurethane foam as per QA method. The back ply and foam is designed with contoured lumber support for comfortable seating posture. Size. 45.0 cm. (W) X 42.0cm. (H). The HR polyurethane foam for seat and back is moulded with density 45 ± 2 kg/m and hardness load 16 ± 2 kgf for 25% compression. The armrest top is made of moulded (P.U) and height is adjustable up to 6.5 ± 0.5cm in 5 steps.The pneumatic height adjustment has an adjustment of 10.0 ± 0.3 cm. The twin wheel castors are injection moulded in black nylon. The understructure is made of 2.54 ± 0.03cm. x 0.2 ± 0.016 cm thk MS ERW tube and black powder coated. Model - SMART MBGS FXD ARMS, Make - Featherlite

CAFETERIA TABLE : Supplying and fixing of Cafeteria table made out of 40mm x 75mm teak wood beam as frame with 12 mm toughen glass..All the wooden section shall be finished with two coats of melamine polish.etc., all complete as per the drawing including.materials, labours, T&P, taxes, royalities, transportation etc. and direction of Engineer-in-charge.

CAFETERIA CHAIR : Supplying and fixing of Cafeteria chair and study chair made out of teak wood stud and frame work with B.W.P. ply finished with cushion. All exposed wood work shall be finished with touch wood coat with mellamine polish all complete as per detail drawing and as per the direction of Engineer-in-charge. Model -TANG CHAIR, Make - Featherlite

STORAGE CABINET: Supplying and fixing of storage unit made out of 19 mm Block Board and 6mm ply back, necessary teak wood beading with melamine polish all around.The exposed surface finished with 4mm veneer All exposed surface finished with melamine polish,inside finished with balancing laminate as specified in drawing.The cost includes the SS auto hinges handle,lock etc as per drawing including all materials, labours, T&P, taxes, royalities, transportation etc. all complete as per the direction of Engineer-in-charge. Base Price of Veneer- Rs. 2000/- per Sft.

LAN NETWORKING :

Supplying , installing, laying of Cat-6 -UTP cable suitable for local area networking for approxmately 40 Nodes shall be of SYSTIMAX/DIGISOL /MOLEX/ PANDUIT/SEIMON/ Giga Speed etc . All complete and as per direction of Engineer- in-charge . The rate is inclusive of all material , labour, T&P , taxes , royalties , transportation etc. all complete . The cable shall be laid through approved make 20 / 25 mm thick PVC pipe.

Supply, installing of 24 Ports loaded patch panel (Cat.-6 standard,STRAIGHT 24 Port patch Panel(Unloaded) suitable for Cat. 6 cable for LAN. The panel shal be of SYSTIMAX/DIGISOL /MOLEX/ PANDUIT/SEIMON/ make. The rate in inclusive of all material, transportation, es etc. for complete delivery at site or as per the diection of Engineer-in-charge or Consultant.

Supply and installation of Category 6UTP Modular Jacks s of SYSTIMAX/MOLEX/ PANDUIT/SEIMON/SYSTIMAX/DIGISOL /MOLEX/ PANDUIT/SEIMON/ make . The rate in inclusive of all material, transportation, es etc. for complete delivery at site or as per the diection of Engineer-in-charge or Consultant.

Supply and installation of FACE Plate with PVC Gang Box for Cat.-6 Mud Jacks shall be of SYSTIMAX/DIGISOL /MOLEX/ PANDUIT/SEIMON/ Make. The rate in inclusive of all material, transportation, es etc. for complete delivery at site or as per the diection of Engineer-in-charge or Consultant.

Supply and installation of 1 meter patch cord (Cat-6 standard) suitable for LAN shall be of SYSTIMAX/DIGISOL /MOLEX/ PANDUIT/SEIMON/ Make. The rate is inclusive of all material, transportation, es etc. for complete delivery at site or as per the direction of Engineer-in-charge or Consultant.

Supply and installation of 12U rack,make VAL RACK /MTS/ APW PRESIDENT /MTS or equivalant. with Power Strip and accesories Fans . The rate is inclusive of all materials,transportation, es etc for complete delivery at site or as per the direction of Engineer-in-charge or Consultant.

Supply and installation of manage switch layer - 2, 24 port 10 / 100 / 1000 mbps POE switch shall be CISCO /JUNIPER /EXTREME/ HPE make . The rate is inclusive of all materials, transportation, es etc. for complete delivery at site or as per the direction of Engineer-in-charge or Consultant.

Supply and installation of 24 port 10 / 100 / 1000 mbps NON-POE switch shall be CISCO /JUNIPER /EXTREME/ HPE make . The rate is inclusive of all materials, transportation, es etc. for complete delivery at site or as per the direction of Engineer-in-charge or Consultant.

Supplying & Installation of 4 Mega Pixel IP Bullet / DOME Camera with all accessories required including GST, transport, royalty etc. as per the direction of engineer in charge or consultant Preferred Make: MILESIGHT/HONEYWELL/MOBOTIX/HIKVISION

Supplying & Installation of 16 Channel 4K NVR Supporting above IP Cameras with all accessories required including GST, transport, royalty etc. as per the direction of engineer in charge or consultant Preferred Make:MILESIGHT/HONEYWELL/MOBOTIX//HIKVISION

Supply & Installation of 4 TB Surveillance Hard Disk Drive for NVR (Above) preferred Make: HITACHI/SEAGATE/WESTERN DIGITAL

2KVA Online UPS with Isolation Transfermer. Single phase input / single output with 30 min backup ( Make: APC / UNILINE/ Paradyne/Emerson)

FIRE SAFETY SYSTEM :

CONVENTIONAL FIRE ALARM SYSTEM

Supply & Installation of Conventional Smoke Detector with double dust trap chamber, internal algorithm processing for optimised performance, central LED for 360o view of detector status, Approved by LPCB for EN 54-5 & EN 54-7. MAKE- RAVEL / HONEYWELL

Supply of Conventional Manual Call Point, with resettable type glass element, clearly visible alarm flag in activated state, provided with custom reset key, Approved by LPCB for EN 54-11. MAKE-RAVEL / HONEYWELL

Supplying, installing, testing and commissioning of 2C x 1.5 sq. mm, Copper Conductor, PVC insulated, FRLS armoured cable confirming to IS standards and specifications. MAKE-POLYCAB/KEI/ RR

FIRE EXTINGUISHER SYSTEM

Supplying installation testing and commissioning of ABC type fire extinguishers of 6 kg capacity confirming to IS:14609 including cost of all material & labour for all floors & service building etc. all complete. Make- SAFEPRO / RONAK / FIRESHILLED

Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket for all floors & service building etc. as per direction of Engineer-in-charge. Make- SAFEPRO / RONAK / FIRESHILLED

Signage

Supply, Fitting & Fixing of LED EXIT light fitting of both side signage with built in battery back-up for 2 hours with proper wiring with ms conducting from the exiting power source for all floors as per approved specification etc all complete & direction of EIC. MAKE- BAJAJ / QUTAK / RAVEL ( Cat No. BESL 03 LED SSD WBB Green)/ Equivalent.

SPRINKLER SYSTEM

Supplying, installing, testing and commissioning of M.S. Pipes confirming to IS 1239 MEDIUM (class B) grade with painting, suitable type of supports, anchor fasteners, bolts nuts (M.S.), clamps, "U" bolts, malleable specials such as Reducers.Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc. complete. structural supports are measured as seperate line item MAKE-JINDAL

(a) 100 MM DIA

(b) 80 MM DIA

(c) 50 MM DIA

(d) 40 MM DIA

(e) 32 MM DIA

(f) 25 MM DIA

Supply,Installation,Testing & Commissioning of Pendent / Upright type Standrd Sprinkler with QB of 68 /79 deg. C temperature rating and 1/2" end connection confirming with UL LISTED for all floors etc. all complete as per direction of Engineer in-charge. Make-KARTAR

Supplying, Installing, testing and commissioning Cl Butterfly valves as per BS 5155 ( PN 16) slim seal standard lever operated type with required flanges, nuts, bolts etc. complete. Make-KARTAR / ZOLOTO / SANT. 100 MM DIA

Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type. Make-KARTAR / ZOLOTO / SANT. 25 MM DIA

H.V.A.C SYSTEM :

Supply of VRF/VRV Modular type outdoor units complete with hermetically sealed DC inverter scroll type compressors with BLDC motors, heat exchanger/condenser coil, microprocessor controller, etc. as per enclosed technical specifications.VRF manufacturer must be OEM of its compressor which is fitted in the outdoor unit. The Unit should be with Vapour Injection system and there should not be any derating upto 39 Deg Cent ambient.All proposed outdoor unit should have minimum COP of 4.0 & 6.0 at 100% & 50% load condition respectively for Cooling. Capable of operation up to 48 deg ambient. All compressor should be DC Inverter Scroll type only. Supply of DAIKIN VRV-X Out Door Units(Cooling Only). 34HP

Supply of The Indoor units suitable for operation on 220V-240V, Single Phase, 50 Hz AC electric supply and shall have shall have electronic control valves to control refrigerant flow with washable Filters,BLDC motors. Supply of Round Flow Cassette Indoor Units with cardless remotes, Pannels & Refnets.

Compact Cassette Indoor Units with cardless remotes, Pannels & Refnets.

Low Sode(Installation of equipment with ancellary items).

Lifting,shifting,positioning,Installation and testing of Modular type outdoor condensing units equipped with highly efficient scroll compressors, with one inverter & other constant speed type compressor(s).

(a) Outdoor Units(34HP)

(b) Round Flow Cassette Indoor Units with cardless remotes, Pannels & Refnets.

(iii) 4.0TR

(c) Compact Cassette Indoor Units with cardless remotes, Pannels & Refnets.

SITC of Interconnecting refrigerant pipe work with (25mm/19 mm thick) nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all pipings.

(a) Gas Line With 25mm thick insulation

(iii) 22.2mm

(b) Liquid Line With 19mm thick insulation

(iii) 15.9MM

SITC of 3 core 1.0 sq.mm copper control cum transmission wiring in PVC conduit between indoor & outdoor, indoor units and their remotes. 3 C * 1.0 sq.mm Cu communication cable

SITC of following sizes insulated PVC drain pipes insulated with 9mm thick nitrile rubber insulation of following size (With Lbow, Socket & Reducers)

(i) 25mm Dia

(ii)32mm Dia.

(iii) 40mm Dia.

(iv) 50mm Dia.

SITC of GI Ducting in accordance with the approved layout drawing,complete with all accessories for the covering of outside/Exposed cable tray. 24 G GP Sheet

SITC of G.I Slotted Tray for expose copper piping.(Black Colour)

(iii) 2"x18"x2"

SITC of GI threaded roads, Anchor Fastners & GI supports.

Supply of R410A gas & Nitrogen Gas

EQUIPMENTS :

Supply installing, testing and comissioning of complete HP desktop pc computer. Real intel 2nd generation core i7 with 8 GB ddr3 ram , full 19" HD led screen including DVD drive, cordless key board and mouse, laptop bag etc. all complete

Supply installing, testing and comissioning of 55" (4' x 2.5') 4K pro series ultra HD smart Led television for display etc. all complete

Supply installing, testing and comissioning of Biometric attendance system with accessories including all type of related applications etc. all complete

INTERNAL ELECTRICAL INSTALLATION :

Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I box having modular base & cover plate of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.( Make of wire Finolex/ L&T / KEI/ Havels / V Guard )and switches of make LEGRAND, HAVELLS,ANCHOR.

(i) Angle Holder point

(ii) Tube Light Point/ceiling light point

(iii) Exhaust Fan point

(iv) Calling bell Points

Supplying and fixing of following modular type switch / socket on the existing switch box / cover including connections etc as required. 5/6 amp. Switch

Supplying and fixing of following modular type switch / socket on the existing switch box / cover including connections etc as required.switches of make LEGRAND, HAVELLS,ANCHOR. 3 pin 5 / 6 amp socket outlet

Supplying and fixing of modular G.I box of 150 mm x 75 mm x 60 mm deep (nominal size) on surface or inrecess with suitable size of modular base & cover plate in front including providing and fixing 3 pin 5 / 6 amps socket outlet and 5 / 6 amps modular type switch, connection, painting etc as required.(For light plugs to be used in non residential buildings)switches of make LEGRAND, HAVELLS,ANCHOR.

Supplying and fixing of modular G.I box of 180 mm x 100 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of modular base & cover plate in front including providing and fixing 5 pin 15 / 16 amps socket outlet and S.P. 15 / 16 amps modular type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings)switches of make LEGRAND, HAVELLS,ANCHOR.

Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required.switches of make LEGRAND, HAVELLS,ANCHOR.

Supply of all required materials and recessed wiring to circuit / sub-main with followings number and sizes of PVC insulated FRLS 1100 volt grade stranded copper wire run inside 20mm PVC conduit (14S.W.G) pipe laid on surface of wall / ceiling and copper wire as earth continuity conductor and comple in all respect including making good to all damages caused and as per instruction of Electrical Engineer - in - charge. All switches & ceiling roses are ISI marked.

(i) Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired..( Make of wire Finolex/ L&T / KEI/ Havels / V Guard )

(ii)Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired..( Make of wire Finolex/ L&T / KEI/ Havels / V Guard )

(iii) Recessed wiring to submain in 4 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired..( Make of wire Finolex/ L&T / KEI/ Havels / V Guard )

(iv) Recessed wiring to submain in 4 x 10 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired..( Make of wire Finolex/ L&T / KEI/ Havels / V Guard )

Supply of 3core2.5 sqmm co.cable

Supply of 4core10 sqmm co.cable

Supply of 4core16 sqmm co.cable

Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface as required.

95 sq mm 3-1/2 core PVC Armoured cables ISI marked MAKE-POLYCAB/KEI/ RR,HAVELLS)

Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm on surface as required.

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. 3x1/2x95 sqmm Ar. Al. Cable

Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed steel / PVC conduit as required. .( Make of wire Finolex/ L&T / KEI/ Havels / V Guard )

Supply and fixing of tv cable RG-6 grade , 7mm solid conductor PE insulated shield with fine tined copper braid and protected with fr pvc sheath along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required..( Make of wire Finolex/ L&T / KEI/ Havels / V Guard )

Supplying and fixing of following sizes of PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required. 20mm pvc conduit

Supplying and fixing telephone socket outlet modular type ISI marked on the existing switch board / cover including connections etc as requird.

Supplying and fixing T.V. antenna socket outlet modular type ISI marked on the existing switch board / cover including connections etc as requird.

Supplying and fixing of 16 / 18 SWG metal box of following sizes (nominal size) on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.

EARTHING

(a) Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required

(b) Supplying and laying 8 SWG copper wires ISI marked at 0.5 meter below ground level for conductor earth electrode including soldering :8 No swg

Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)

Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)

Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required.

PANEL & DISTRIBUTION BOARD : Supply, delivery, installation, testing & commissioning of L.T indoor floor/wall mounted type distribution boards made out to 2mm thicks CR sheet metal cubicle fixed on m.s channel base, duly acid treated for derusting, primered and painted with 2 coats of power coating of approved shade, dust, damp& vermin proof; having hinged door and compartmental arrangment for each equipment & busbar chamber on the top of the panel running horizontally having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant IS and as per special condition of contract making good the damages caused complete as per the direction of Electrical Engineer in charge .Make of material - L&T, Havells,Legrand.

(b) Branch Distribution Board (Light)Company made & CDB 1. no. 4 way 3 phase DB-1, Incomming, 63 Amp TPN MCB -1 No: 10A -12nos

(c) Branch Distribution Board (Power)Company made, 4 way 3 phase DB-1, Incoming: 63 Amp TPN MCB -1 No, Out going: 25A -12 nos

(d) Branch Distribution Board (ACDB)Company made, 4 way 3 phase DB-1, Incomming, 32 Amp TPN MCB -1 No, Out going, 10A -12 nos

(e) Branch Distribution Board (AC PANEL)Company made, 4 way 3 phase DB-1, Incomming: 63 Amp TPN MCB -1 No, Out going: 32 AMP.F.P. RCCB -3 nos

FITTING & FIXTURES: Supply, delivery, installation , testing and commissioning of the followig fittings / fixtures complete will all required accessories and lamps on wall / ceiling as per the direction of Electrical Engineer in Charge

(a) Indoor decorative luminaire for Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver for LED tube light fitting Philips/Havells Catalogue No. ENDURALINEARNEOBS20WLED865SPCWH diffused for 20w LED and complete with all other accessories making good in all respect with complete testing as per direction of Engineer in charge.

(b) Providing and fixing of 1 x 10 W LED Philips/Havells make Cat. No. LHLDEUHEMK8P010 with testing and complete with all accessories as per the direction of Engineer in charge.

(c) Surface mounted light Philips/ Havells make Cat. No. ENDURANEOHESURFACEDLS15WLED857S for 15W LED 4000K and complete with all other accessories including fixing and making good in all respect with complete testing as per direction of Engineer in charge.(entrance lobby)

(d) Indoor decorative luminaire for surface mounted LED 2X2 extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver for LED light fitting Philips/Havells Catalogue No. PLUTOSURFACE2X2PLS34WLED840S diffused for 34w LED and complete with all other accessories making good in all respect with complete testing as per direction of Engineer in charge.

(e) Indoor decorative luminaire for surface mounted downlighter with white powder coated polycarbonate decorative housing and pressure die-cast heat sink having high efficiency with heavy duty driver light fitting Philips/Havells Catalogue No. INTEGRANEOSURFA CEDLS10WLED857S diffused for 10w LED and complete with all other accessories making good in all respect with complete testing as per direction of Engineer in charge.

(f) Indoor decorative luminaire for Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver for LED tube light fitting Philips/Havells cat.noENDURALINEARNEOBS10WLED865SPCWH diffused for 20w LED mirror light (2') and complete with all other accessories making good in all respect with complete testing as per direction of Engineer in charge.

Supply, delivery, installation & testing of following sweeps and speed of exhaust fans suitable for operational at 250 volt, 50 hz a.c. supply complete with a set of propeller blade, tripod leg for mounting of motor, ring frame, blades, gravity louvre complete assembly including supply of sundry materials, making hole of suitable size for housing of exhaust fan, making connection from suitable point outlet, making good the damages caused complete as per Electrical Engineer in charge. 250 mm sweep 900 rpm Panasonic cat.no.Smartair Ventilation Fan

BICHITRANANDA SAMANTARAY

KRISHIK INFRASTRUCTURE DEVELOPERS PVT. LTD