WELCOME MAINT (B/R AND E/M) IN OFFRS MD ACCN AND CERTAIN REPAIR TO OTM AND MD ACCN OF A-1 AREA OF AGE B/R-I UNDER GE (WEST) JALANDHAR CANTT

Taking down old shutters of any description exc. 1.0Sqm but not exc. 2.0Sqm Each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5sq.m each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5sq.m but not exc. 4sq.m Each complete all as specified and directed.

S&F, 35 mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.

S&F made 30mm thick flush shutters, solid core construction, with block board core and plywood face panles, commercial type on both sides complete all as specified and directed.

M&L for factory made 100% solid WPC door frame 85mm x 45mm single rebated made from wood polymer composite (single extruded process) material comparising of vigin PVC polymer of K value 57-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by "RAJSHRI" an certified by ISO 9001-2015, having good screw holding capacity (screw withdrawel strength of min 990N), min compressive strength of 58N/Sqmm, modulus of elasticity 900 N/Sqmm and resistance to spread of flame of class A category with property of being termite /borer proof, water /moisture proof & fire retardant & fixed in position with SS dash fastener / hold fast of required dia and length, all as per specification, drawing and as directed by Engineer-in-Charge. Note: Material test certificate and authentication should be compusory provided by the manufacturing company, complete all as specified and directed.

M&L for factory made of 30mm thick 100% solid WPC laminated moduled door shutter comparising of vigin PVC polymer of K value 57-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives made from extrusion process WPC foam sheet single extrauded (inner) with having minimum frame density not less than 650 Kg/cbm & manufactured by "RAJSHRI" an certified by ISO 9001-2015, having good screw holding capacity (screw withdrawel strength of min 2000N) (Face) & 1100 N (Edge), min compressive strength of 50N/Sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of class A category with property of being termite /borer proof, water /moisture proof & fire retardant. WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted on both faces of shutter and fixing stainless steel butt hings of required size with necessary full body threaded star headed counter sunk SS screwes, all as per specification, drawing and as directed by Engineer-in-Charge. Note: Material test certificate and authentication should be compusory provided by the manufacturing company, complete all as specified and directed.

M&L for factory made 100% solid WPC door frame 125mm x 65mm double rebated made from wood polymer composite (single extruded process) material comparising of vigin PVC polymer of K value 57-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by "RAJSHRI" an certified by ISO 9001-2015, having good screw holding capacity (screw withdrawel strength of min 990N), min compressive strength of 58N/Sqmm, modulus of elasticity 900 N/Sqmm and resistance to spread of flame of class A category with property of being termite /borer proof, water /moisture proof & fire retardant & fixed in position with SS dash fastener / hold fast of required dia and length, all as per specification, drawing and as directed by Engineer-in-Charge. Note: Material test certificate and authentication should be compusory provided by the manufacturing company, complete all as specified and directed.

M&L for factory made of 30mm thick 100% solid WPC laminated skeleton door shutter comparising of vigin PVC polymer of K value 57-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives made from extrusion process WPC foam sheet single extrauded (inner) with having minimum frame density not less than 650 Kg/cbm & manufactured by "RAJSHRI" an certified by ISO 9001-2015, having good screw holding capacity (screw withdrawel strength of min 2000N) (Face) & 1100 N (Edge), min compressive strength of 50N/Sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of class A category with property of being termite /borer proof, water /moisture proof & fire retardant. WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted on both faces of shutter and fixing stainless steel butt hings of required size with necessary full body threaded star headed counter sunk SS screwes, all as per specification, drawing and as directed by Engineer-in-Charge. Note: Material test certificate and authentication should be compusory provided by the manufacturing company, complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.