Construction of Sub Health Centre at village Nadana in Karnal Distt. (Pdg. E.I. only). Recall

Amount

Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections . 31.12 (a) (v) Cat-B Double pole switch 32 amp. 415 Volts,

31.12 (a) (xv) Cat-B Triple pole switch with neutral link 63 amp. 415 Volts.

31.13 Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. Size 40 mm x 40 mm x 6 mm.

31.14 Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

31.15 Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. S.P.N. enclosure for single pole MCB 20 amp.

Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. 31.17a) (ii) SP MCB of 9 KA breaking capacity 6 amp. to 32 amp.

31.17(a) (ii) SPN MCB of 9 KA breaking capacity 6 amp. To 32 amp.

31.17(a) (ii) TPN MCB of 9 KA breaking capacity 6 amp. to 32 amp.

31.18 (vii) Supply and erection of Fittings and Accessories. Call bell 220 / 230 volts A.C. bakelite with double coil.

31.18 (xi) Bakelite angle / straight button holder large size.

31.18 (xii) Switch 5 amp. On existing sheet.

31.18 (xiii) Wall socket 5 amp. On existing sheet.

31.18 (xxiv) Erection only of 1x40 watts or 2x40 watts 1220 mm long / 1x20 watts or 2x20 watts ,610 mm long fluorescent tube fitting directly on wall including necessary connections with 0.75 sqmm ( 24 / 0.20 mm ) PVC copper flexible cable for connecting the tube with the adjecent point.

31.18 (xxvi) Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job. .

31.20 (i) Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work.

31.20 (iii) Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to he site of work.

31.20 (iv) Erection of cabin fan complete with necessary earthing including carriage from local railway station /goods transport /PWD store to the site of work.

31.20 (v) Making suitable hole in the wall upto 450 mm sweep exhaust fan including finishing the same and fixing of wire mesh duly fixed with Deodar wood frame of section 40 mm x 25 mm thick.

31.20 (vi) Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep.

31.21 Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. 31.21 (xiii) Galvanised iron pipe 50 mm dia on flushed.

31.21 (xxi) Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed.

31.21 (xxiii) Heavy guage welded conduit pipe 32 mm dia 1.60 mm thickness flushed.

31.21(xxx) Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing PVC pipe 80 mm dia.

31.22(i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

31.22(ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

31.22(xix) Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size.

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 31.26 (iv) Ard. 10 Sq. mm 2 Core Cable .

31.26 (xI) Ard. 16 Sq. mm 4 Core Cable .

31.30 (III) ( xv ) Supply and erection of 32 mm dia meter 1.5 metre long bracket ( B-Class ) making an angle of 10 to 15 degree with horizontal plane for mounting street light fitting fixing of GI bracket on wall with 2 Nos. , 32 mm x 3 mm thick MS clamps including the cost of cutting , welding of GI pipe complete with cement sand mixture , bolts and nuts etc. including necessary connections .

Wiring in 1.5 sq.mm PVC Insulated Copper conductor cable in 1.6 mm thick conduit pipe. Fan Point Medium Point

Light Point Short point

Medium Point

Long point.

Twin control light point with 2 way, 5 amp. single pole switch. Medium Point

Long point.

Call bell point including M.S box of size 180 mmX100 mmX 60 mm deep for Call bell. Long point.

3 pin 5 amp. plug point including earthing the 3rd. pin etc. Short point

Medium Point

Long point.

3 pin15 amp. plug point with 4 sq mm PVC insulated Copper conductor cable- including earthing the 3rd. pin etc. Long point.

31.40 Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe . Size 1.5 sqmm ( 3/0.81 )

Size 4 sqmm ( 7/0.85 )

31.41 Supply and erection of Double door sheet steel enclosure distribution boards suitable for MCB's & ELCB's recessed in wall including bonding to earth complete with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 12-way , SP&N ( Horizontal)

8-way , TP&N ( Horizontal) (8+24)

31.44 Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work. 25 mm dia.

31.48 Supply and erection of MS Saddle and clamps duly galvanised , on wall / RCC parapit for fixing underground cable at a distance of 0.60 metre center to center fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect and upto entire satisfaction of the Engineer-in-charge of work.

31.55 Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Delux model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection etc. up to the entire satisfaction of the Engineer-in-Charge of the Work.

NS Supply and erection of MS box of size 8'' x 10'' x 4'' (20cmx25cm) and 10cm deep made of 1.6mm thick M.S. sheet covered with 5mm thick bakelite sheet for fixing of 4 Nos. socket and switch of 6 amp. and one No. of multi socket and switch of 15 amp. including fixing of one No. fuses unit and indicator off another make. the M.S. box is recessed in wall including cost of necessaru cement and mixture required to complete the job in all respect upto entire satisfaction of the Engineer-in-charge of work.