REPAIR AND REPLACEMENT OF FENCING, COMPOUND WALL, HARD STANDING, CLEANING OF AREA DRAIN UNDER AGE B/R-II AT KAMPTEE.

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC type D2 1:4:8 (40 mm graded aggreate) in foundation, filling and mass concrete complete all as specified and directed

M&L for 75 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone agg) as in hard standing and finished the surface even and smooth without using extra cement etc complete all as directed.

M&L for 100 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone agg) as in hard standing and finished the surface even and smooth without using extra cement etc complete all as directed.

M & L for chequred tiles 300 x 300 x 25 mm thick,glossy, rubber finished, set jointed and pointed in neat and cement slurry in floors with grey cement and pigment incl screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed .

M&L for sand filling under floor or in foundation including watering and consolidation etc complete all as directed.

M&L for machine pressed precast conctete interlocking paver block, rubber finished any colour,shape and size confirming to IS 15658-2006 of 60 mm thickness,with grey cement and pigment M-35 Grade etc complete all as directed.

Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, dry or laid dry and pointed complete all as specified and directed.

Refixing only machine pressed precast conctete interlocking paver block, rubber finished any colour,shape and size confirming to IS 15658-2006 of 60 mm thickness,with grey cement and pigment M-35 Grade etc complete all as directed.

M&L for machine pressed precast conctete interlocking paver block, rubber finished any colour, shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade etc with grey cement and pigment complete all as directed.

M&L for cement concrete 1:2:4 type B-1(using 20mm graded aggregate) as in roof kerbs or mud stops, steps, rounded or chamfered on edges all as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves(thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L Cement concrete 1:2:4 type B1 using 20mm graded stone aggragate as in surface channels and drains complete all as specifed and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specifed and directed.

All as per item No. 14 but above Add or deduct for each 25 mm girth or part thereof over or under 30cm complete all as specifed and directed.

Taking down cement or cement plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed .

M&L for brick work with fly ash bricks old size , straight or curved on plan exc 6 m mean radius , built in cement mortor 1:6 complete all as specified.

M&L rendering 15mm thick on brick work or concrete surfaces with CM (1:4) finished fair and even complete all as specifed and directed.

M&L for preparing newly plastered walls surfaces and applying three coats White wash over wall surfaces all as specified and directed

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed.

M & L for preparation of new concrete surfaces of any description not otherwise described over 10 cm width or girth & applying with two coats of synthetic enamel paint over a coat of primer.

Cleaning of sludge/soil etc accumulated in existing drain and thrown away the spoil in low lying area exc 50m upto a distance of 250m complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

Excavation in trenches n exc 1.5m in deepth and 1.5m in width and getting out in hard /dense soil complete all as specified and directed.

M&L Form work to side of concrete in fdns, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.

M&L Form work to side of columns and simillar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in columns and pillars etc complete all as specified and directed.

M&L precast RCC 1:2:4 type B1 (using 20mm graded aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, mangers, shelves, lintel over jalli and similar articles with plain faces and set in CM 1:6 . (reinforcement measured and paid sepratly) complete all as specifed and directed.

S&F milt steel TMT bars 10 mm dia and over , cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia.

All as per item No 21 above but 6 to 8 mm dia complete all as specified and directed.

Dismantling posts or sturt (wood, steel or RCC) any section, including taking out embeded portion, embeded in concrete and making good disturbed ground

M&L cement concrete 1:3:6 type C2 (40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.

Material and labour for RCC precast fencing post, in cement concrete B-l, 1:2:4 (Nominal Mix) (20 mm graded aggregate) average cross sectional area exc 100 sqcm and n.exc 250 sqcm with or without chamfered angles and flat, splayed, rounded or mitred tops, complete all as specified and as directed.

S&F post and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire, etc. flat iron fillets ( for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.and similar work conforming. complete all as specified and directed.

Dismantling of old barbed wire of any description from RCC fencing post, complete all as specified and as directed. (Note:- Each line of wire shall be measured).

S&F for galvanised two strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolt including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and directed.

Supply only chain link MS galvanised fencing any size or type including provision of binding wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provisition of binding wire complete all as specified and directed.

M & L for preparation of new steel surfaces of any description not otherwise described, exc. 10 cm width or girth & applying with two coats of synthetic enamel paint over a coat of red oxide primer.

M/L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) confirming to Fe-290 e-165. complete all as specified and directed.

M&L for 1mm thick Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required.

S&F for MS round bars 5mm dia and over upt and including 10mm dia in stirrups, binders etc quality Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165), complete all as specifies and directed.

M&L for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

M & L for preparation of new steel surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint & applying with two coats of synthetic enamel paint over a coat of red oxide primer.

M&L Precast cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate Set in CM(1:4) louvres and jallies, 40mm thick (measured solid), including all mouldings but excluding frame, complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 96,700.00]

NORTH INDIA PEST CONTROL

DE PRETTY AND CO

Vishwakarma Engineering Works

M/s T.S.JOHAR

Varsha G Nagphase

M/s DS Khekde

Bidder Name

DE PRETTY AND CO

Vishwakarma Engineering Works

M/s DS Khekde

M/s M.G. Hargunani

NORTH INDIA PEST CONTROL

M/s T.S.JOHAR

Varsha G Nagphase