Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.0 LAccepted-AOC 5766 AMBALA CANTT NEELKANTH ENGINEERS NICHOLSON ROAD VILLAGE TOWN PALLEDAR MOHALLA CITY AMBALA CANTT AMBALA HARYANA 133001 INDIA | AMBALA | HARYANA | 133001 | L1 | Accepted-AOC The lowest bidder | |
| 2 | L2₹7.2 L+₹12,002 (1.68%)Rejected-AOC | L2 | Rejected-AOC Other than the lowest bidder | |
| 3 | L3₹7.7 L+₹58,031 (8.15%)Rejected-AOC PLOT NO 407 HIMSHIKHA PINJORE PANCHKULA HARYANA 134102 | PANCHKULA | HARYANA | 134102 | L3 | Rejected-AOC Other than the lowest bidder |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
8 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) JUTOGH
GE (I) JUTOGH, JUTOGH CANTT SHIMLA (HP) - 171008
REPAIR TO E/M INSTALLATION AT MIL STN KALKA UNDER GE (I) JUTOGH
2023_MES_594629_1
GE(I)/JUT-16 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
KALKA
CLASS E CATEGORY a (i)
6 documents required · 6 mandatory
₹500
GE (I) JUTOGH
₹20,000
Yes
19 Jun 2023
11 May 2023
10 Jun 2023
11 May 2023
8 Jun 2023
25 May 2023
Amount
Demolition of brick or stone masonry, built in cement mortar incl all quoins, pillars, arches etc but excluding ashlar facing complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed..
M&L for brick work with Sub class 'B' brick straigth or curved on plan exc. 6m mean radius built in CM 1:6 (EXCEPT BRICKS) complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) removing of rubbish outside premices, complete all as specified and directed.
M&L for chequered cement concrete tiles glossy finish 30cm x 30cm x 20-25mm thick, machine rubber moulded set jointed and pointed in neat cement slurry in floors with mixture of white and grey cement in equal proportion and pigment over 20mm thick screed bed in CM 1:6 complete all as specified and as directed.
M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.
M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
M&L for machine pressed precast interlocking paver block of any size any shape conforming to IS -15658 - 2006 of 100mm thick, M-50 Grade, with grey cement and pigment set over sand cushining as required complete all as specified and directed.
M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
M & L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface mixed with liquid water proofing compound as per manufacturer's instruction finished even and fair complete all as specified and directed. Note: WPC shall be measured and paid separately under respective item of BOQ.
M&L for preparing of newly plastered surface walls and applying two coats of cement base paint, complete all as specified and as directed.
Supply only Integral water proofing compound complete all as specified and directed.
Dismantling of brick or terracing tiles of single layers on roofs incl cleaning of bricks/tiles and removal of unusable bricks/tiles and removal from site, complete all as specified and directed.
Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.
M & L for PCC 1:2:4, type B-1, using 20mm graded crushed stone agg as in roof kerb or mud stopes, padding on roof etc finished even and fair, average thickness as required to maintain proper slope complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:4 on concrete surfaces of roof finished even and smooth without using extra cement mixed with water proofing compound of approved make as per manufacturers instructions on existing roof surfaces complete all as specified and directed. Note: WPC shall be measured and paid separately under respective item of BOQ.
M&L for roof treatment, cleaning of old roof slab surfaces including sweeping clean &washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed as under:- (a) Preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @0.30 Ltr/sqm (b) Applying bitumen @1.20kg/sqm of grade 85/25 (c) Supplying and laying modified polymeric water proofing membrane super thermo lay 3mm thick of weight not less than 3.00kg /sqm reinforced with polyester non woven fabric weight not less than 150gm/sqm center core including coping on the surfaces with torch application of membrane with 10cm over laps as required and dorected. (d) Applying aluminium paint @ 0.20Kg/Sqm.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.
Dismantling Asbestos cement (corrugated, semicorrugated , etc) sheets n roof coverings complete all as specified and directed.
Fixing only, galvanized, corrugated mild steel sheeting with two corrugation side lap fixed with 'L' or 'J' type hooks and washers, complete all as specified and directed.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified.
Dismantling wrought iron or mild steel work of any description in any position not otherwise provided for fencing post etc., complete all as specified and directed.
M&L for roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. Structural steel conforming to Fe-410W, Grade-E 250, Quality 'B', complete all as specified and directed.
M&L for framed work such as grills, gratings etc., with ends of bars shouldered or riveted, or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work complete all as specified and directed.
M & L for preparation of new or previously untreated steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed.
M&L for preparation of old steel surface of any description over 10cm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
Dismantling posts & struts, (wood, steel or R.C.C) any section, including taking out embedded portion & making good distributed ground in natural ground, complete all as specified and directed.
Dismantling posts & struts; (wood, steel or R.C.C) any section, including taking out embedded portion & making good distributed ground in concrete, brick work masonary etc., complete all as specified and directed.
Dismantling fencing wire mesh, any type complete all as specified and directed.
Excavation in post holes (or similar holes) each n. exc. 0.5 cum in hard/dense soil and getting out returning filling in and ramming earth or broken rubble mixed with eareth around in layers not exc. 25 cm watering and removing surplus soil to a distance n. exc 50 m and making good surface, complete all as specified and directed.
S&F mild steel work as in hand rails half round or other stock section or core for wooden hand rail straight portion drilled and counter sunk for balusters running bars for doors, balusters, nosing to steps including embeding in concrete and screwing etc., wind ties for roof including securing bolts, post and strut in fencing including cutting tops to shape as directed drilling holes, notching for wire etc. flat iron fillets securing wire mesh including all necessary drilling and bolting and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh size and type to any type of standard rails, straining bolts etc, including provision of binding wire, complete all as specified and directed.
Supply only Chain link MS galvanisd fencing of 4mm dia wire (8 SWG), mesh size 75x75mm made into mattresses laped wired laid in position complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified and directed
M&L for mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (Annealed) not less than 0.90 mm dia or securing with clips quality conforming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165). complete all as specified and directed.
S&F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolt, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins complete all as specified and directed.
S&F mild steel screw bolts (machine made) dia of neck exceeding 5 but not exc 10 mm with hexagonal or square head at one end and screwed the other end or screwed both end, each screw end to be fitted with washers and one hexagonal or square nuts, n.exc 5cm long complete all as specified and directed.
Taking down chowkats or frames with shutter not exc 1.5 sqm (without taking off shutters from frames) and removing from site including making good the distrurbed surfaces complete all as specified and directed.
Taking down chowkats or frames with shutter exc 1.5 sqm but n.exc 4.0 sqm (without taking off shutters from frames) and removing from site including making good the distrurbed surfaces complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each and removing from site complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening after necessary repair complete all as specified and directed.
S&F steel windows of profile rectangular tube section with side hung shutters incl projecting type hinges with steel handles, MS peg stay with glazing bars, complete all as specified and directed.
S&F steel windows of profile rectangular tube section with side hung shutters incl projecting type hinges with steel handles, MS peg stay without glazing bars, complete all as specified and directed.
S&F steel window or ventilators, fixed type, with galzing bar complete all as specified and directed.
S & F 3 mm thick figured glass, pin headed type and fixed with wooden beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.
S&F sheet glass 3mm thick ordinary quality and glazing with oil putty or wooded bead/aluminium clip built in squares not exceeding 0.5 sq.m in each pane, complete all as specified and directed.
S&F in repair 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S & F pressed steel frames (made of 1.25 mm thick sheet) for door 125x60mm with one or more rebates incl necessary fixing lugs hinges lock strike plate etc including filling with PCC 1:3:6, Type C-0, complete all as specified and directed.
S & F pressed steel frames (made of 1.25 mm thick sheet) for door 105x60mm with one or more rebates incl necessary fixing lugs hinges lock strike plate etc including filling with PCC 1:3:6, Type C-0, complete all as specified and directed.
M&L for 30mm thick flush shutters, solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.
S&F 35mm thick (factory made) glazed and skeleton shutter open rebated and prepared to receive glass gauge etc (with sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) of IInd class hard wood complete all as specified and directed
S&F solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC Sheet & edges will be painted to match with printed sheet reinforced with MS square tube complete all as specified and directed.
S&F factory made solid PVC moulded door shutters 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core supplying & fixing in frame at site as per specification, complete all as specified and directed.
S&F butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22, complete all as specified and directed.
S&F Aluminium tower bolt of extruded section, 200mm length of bolt and fixed with screws, complete all as specified and directed.
S&F 125mm size, aluminium (cast type) anodized, handle and fixed with screws, complete all as specified and directed.
S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws, complete all as specified and directed.
S&F 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate, complete all as specified and directed .
M&L for PCC 1:3:6, type C-1, using 20mm graded crushed stone aggregate as in filling back of pressed steel frame/ hold fast blocks etc., complete all as specified and directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.
M & L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
S&F in repair 300 mm, MS ordinary rat tail rod pattern spring incl roller& roller plate & welding if necessary complete all as specified.
Taking up or down 15mm bore steel water tubing and connections incl cleaning for refixing or removal from site of 15mm bore complete all as specified and directed.
Taking up or down 20mm bore steel water tubing and connections incl cleaning for refixing or removal from site o complete all as specified and directed.
S & F 15mm bore galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor complete all as specified and directed.
Re-fixing old steel tubing 15 mm bore with new fittings and connections in new or old positions, complete all as specified and directed.
S & F 20mm bore galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor complete all as specified and directed.
Re-fixing old steel tubing 20 mm bore with new fittings and connections in new or old positions, complete all as specified and directed.
S & F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.
S & F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.
S&F in repair 75 mm bore, PVC (SWR), floor trap, plain with grating including jointing with solvent, cement, complete all as specified and directed.
S&F in repair 110 mm bore, PVC (SWR), Junction, (Single T/Y), equal or unequal with access door complete all as specified and directed.
S&F in repair 75 mm bore, PVC (SWR), Junction (Single T/Y), equal or unequal with access door complete all as specified and directed.
S&F in repair 110 mm dia PVC (SWR) bends with access door complete all as specified and directed.
S&F in repair 75mm dia PVC (SWR) bends with access door complete all as specified and directed.
Dismantling water tanks exc. 250 ltrs & n. exc. 500 ltrs capacity and removing from site complete all as specified and directed
Dismantling water tanks exc. 500 ltrs & n. exc. 1000 ltrs capacity and removing from site complete all as specified and directed
S&F rotational moulded polyethylene 500 Ltrs capacity water storage tanks (cylindrical vertical with closed top) three layer, hoisted and fixed in position as specified in SSR Part-I complete all as specified and directed.
S&F rotational moulded polyethylene 1000 Ltrs capacity water storage tanks (cylindrical vertical with closed top) three layer, hoisted and fixed in position as specified in SSR Part-I complete all as specified and directed.
S&F in repair ball brass valve high pressure with polythelene float and fly nut complete screwed for iron pipe and fixed 20mm bore complete all as specified and directed
S & F in repair 20mm CI gate valve, with high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union, complete all as specified and directed.
S & F in repair 15mm CI gate valve, with high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union, complete all as specified and directed.
S & F in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float, flush pipe and handle including brackets, complete all as specified and directed.
S & F in repair 15mm pillar tap CP cast copper alloy with capstan head screwed down high pressure with or without lettered hot or cold with long shank and fly nuts fancy type complete all as specified and directed.
S & F in repair 15mm bore bib tap fancy type chromoim plated long body cast copper alloy with crutch or butterfly handle screwed down secrewed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ CI trap, lime concrete bedding and making good floor, complete all as specified and directed.
S&F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat cover white/ coloured closed pattern with flat bottom and cover with PVC hing devise, fixing bolt for pedestal pattern and cast iron 'P' or 'S' trap, complete all as specfied and directed.
S&F in repair PVC water closet seat cover , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.
S&F Health Faucet (ABS body) with 1.25 mtr long metalic expandable tube & hook complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises complete all as specified and directed .
M&L for Glazed ceramic colored tiles on vertical surface such as in skirting/dado of size 350x250x7mm/ 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match to coloured tiles.over Including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.
M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick square/ rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified and directed.
M&L for heavy duty coloured endura tiles of size 300x300mm or 400x400x9-10 mm thick, as in floor set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the tiles including 20mm thick screed bed in CM (1:6), surface finished even and rough to recieve the tiles, complete all as specified and directed.
M&L for Non skid ceramic coloured tiles 7 to 8mm thick square/rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.38 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6, complete all as specified and directed.
R. P. Suppliers and Construction Co.
S.R.SHARMA & SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .