REPAIR/REPLACEMENT /RENEWAL OF CEILING FAN, EXHAUST FAN, GEYSER AND ALLIED WORKS IN OTM AND MD ACCN AT ARTY CENTRE AND AOP AREA UNDER GE NASIK ROAD.

Amount

Taking down/maintenance for parts of geysers of any capacity /make after disconnecting the wire from existing power point and refixing the same after replacement of heating element, thermostate, geyser assembly, PVC pipe & anchor bolts, etc. (if required) complete all as specified and directed by Engr -in- charge, Notes :- (i) Work shall be carried out at the site on routine basis , (ii) Spares (heating element, thermostate, ARV, NRV, PVC pipe, gasket and anchor bolts etc. will be measured and paid separately)

Supply only cable PVC insulatd 3 core 2.5 Sqmm with stranded copper conductor 1100Volts grade from socket /switch to geyser.

Supply only geyser inner tank of 25/50 ltrs capacity by gas welding /brazing for water tightness and testing complete.

Supply only 20A SP/SPN plug and socket enclosure in sheet steel enclosues without SP/SPN MCB complete all as specified and directed.

Supply only Geyser water storage tank vertical / horizontal type capacity 25 ltr make of metal stainless steel as specified and directed

Supply only Geyser water storage tank verticle / horizontal type capacity 50 ltr make of metal stainless steel as specified and directed

Taking down and refixing on the site after replacement of of solar geyser of any make and capacity including providing heating element, thermostate, neno lamps, NRV, ARV, gas welding /brazing and any other important part of solar plate as required on site, to make it serviceable, complete all as specified and directed by Engr-in-Charge.

Supply only Glass wool PF any colour complete all as directed by Engineer-in-Charge

Supply only heating element triangle type 1500 watt, complete all as specified and directed by Engineer –in-Charge.

Supply only heating element cup type1500 watt, complete all as specified and directed by Engineer –in-Charge

Supply only heating element thread type 1500 watt, complete all as specified and directed by Engineer –in-Charge

Supply only heating element tringle type 2000 watt, complete all as specified and directed by Engineer –in-Charge

Supply only heating element cup type 2000 watt, complete all as specified and directed by Engineer –in-Charge

Supply only heating element thread type 2000 watt, complete all as specified and directed by Engineer –in-Charge

Supply only themostate for geyser, complete all as specified and directed by Engineer –in-Charge

Supply only neon lamp for geyser yellow /red/green, complete all as specified and as directed by Engineer –in-Charge

Supply only air realese valve for geyser as specified and as directed by Engr in Charge.

Supply only Non returned valve 15mm for geyser all specified and as directed

Supply only flexible PVC connection armoured type both side brass union type nuts 45 cm length complete all as specified and directed.

Supply only flexible PVC connection armoured type both side brass union type nuts 60 cm length complete all as specified and directed.

Supply only flexible PVC connection armoured type both side brass union type nuts 90 cm length complete all as specified and directed.

Supply only anchor bolts 75mm long made out of stain less steel complete all as specified and directed

Supply only gasket rubber ring of Heater plate of adequate size of geysers complete all as specified and directed by Engr in Charge.

Supply only new geyser assembly for any make/model/capacity of geysers including all necessary replacement of required to make it serviceable. complete all as specified and directed by Engr-in-Charge.

Taking down of ceiling fan/exhaust fan of any size /sweep after disconecting the wire from existing ceilling rose and refixing the same after repair/ rewinding, cleaning dust, oiling, greasing & hanging clamps (if required) complete including providing flexible twin core copper conductor 40/0.0076 stranded cord from ceilling rose to connection of fan upto 1 mtr length complete all as directed by Engr -in- charge.

Dismantling of ceiling fan, segregation of unserviceable parts, cutting and removing out copper winding, cleaning the armature, rewinding of fan armature with appropriate gauge of super enamelled copper wire with necessary insulating materials such as vertex paper, cotton tape, PVC insulation tape, Rotter soft etc varnishing with approved grade of insulation varnish and heating up, re-assembling the fan complete with replacement of unserviceable spares parts, (spareparts will be measured & paid separately) including necessary lathe work for fixing of bush/bearing greasing the same with approved grade of grease, making all electrical connection and including supply and fixing the following items (Split pin - 02 Nos, Connection block - 1 No and Insulation rubber bush. - 01 No) and including necessary transportion to workshop, for 1200MM sweeps of ceiling fan .

All as per Item No.26.00 but 1400MM sweeps of ceiling fan

Supply & fixing brushless direct current (BLDC) ceiling fan 1200 mm sweep (ISI Marked), with super enamelled copper wire, white color, Class of insulation "B", 5 Satr rated, ISI marked, rated voltage 230Volt AC, 50 Hz , Rated power 26Watt (+-) 10%, Rated speed 350 RPM (+-) 10%, power factor 0.9 at 5th speed, Air delivery 210 Cum/min (CMM), operating temp 75 degree max, 3 nos aluminium blades and thickness 1.1 mm (after painting), Double ball bearing, speed control thorugh regualator, Low voltage starting i.e. 185 Volt minmum, Insulation resistance more than 2 mega ohm and lekage current 210 MICRO Amps Max includung connection rod as per existing length, writing MES Nos on ceiling fans complete all specified and directed by Engr-in-Charge.

Dismantling of defective/burnt winding of air ventilator/exhaust fan of various make of size 225 mm sweep working on 230 to 380 volts single phase /AC supply and Rewinding with supper enamiled new copper wire of apropriate Gauge including warnishing good quality varnish heating and re-assembling the fan / testing / transportation / placement / of connector flexible copper wire size 23/0.0040, 3 core up to one meter/reqd at site complete all as specifiede and directed.

All as Item No. 29.00 above but for exhaust fan rewinding of size 250mm sweep

All as Item No 29.00 above but for exhaust fan rewinding of size 380mm sweep

All as Item No 29.00 above but for exhaust fan rewinding of size 450mm sweep

Supply & fixing brushless direct current (BLDC) ceiling fan 1200 mm sweep (ISI Marked), with super enamelled copper wire, white color, Class of insulation "B", 5 Satr rated, ISI marked, rated voltage 230Volt AC, 50 Hz , Rated power 26Watt (+-) 10%, Rated speed 350 RPM (+-) 10%, power factor 0.9 at 5th speed, Air delivery 220 Cum/min (CMM) , service value 8.5 cum/min/W, operating temp 75 degree max, 3 nos aluminium blades and thickness 1.1 mm (after painting), Double ball bearing, speed control through regulator, Low voltage starting i.e. 185 Volt minmum, Insulation resistance more than 2 mega ohm and lekage current 210 MICRO Amps Max includung connection rod as per existing length, writing MES Nos on ceiling fans complete all specified and directed by Engr-in-Charge.

Supply and fixing in replacement of exhaust fan (Plastic body) blade of size 250 to 300mm sweep.

Supply and fixing in replacement of (Plastic body) exhaust fan motor suitable for 250 to 300mm sweep exhaust fan.

Supply and fixing in replacement of exhaust fan (Plastic body) complete plastic body including louvers suitable for 250 to 300mm sweep exhaust fan.

Overhauling of ceiling fan of any make and sweep after opening and cleaning rotor bearing and stator properly and oiling/greasing of bearing/ bushes, reassmbling the same, fixing and coonecting on its existing position and testing on completion all as specified and as directed including taking down. (Note- (i) Overhauling of ceiling fans will be carried out at AGE E/M Yard only. (ii) The spares required shall be measured and paid separately in the relevant items).

Supply & fixing brushless direct current (BLDC) ceiling fan 1200 mm sweep (ISI Marked), with super enamelled copper wire, white color, Class of insulation "B", 5 Satr rated, ISI marked, rated voltage 230Volt AC, 50 Hz , Rated power 30 Watt (+-) 10%, Rated speed 350 RPM (+-) 10%, power factor 0.9 at 5th speed, Air delivery 225 Cum/min (CMM) , service value 7.5 cum/min/W, operating temp 75 degree max, 3 nos aluminium blades, Double ball bearing, speed control through regulator, Low voltage starting i.e. 185 Volt minmum, Insulation resistance more than 2 mega ohm and leakage current 210 MICRO Amps Max includung connection rod as per existing length, writing MES Nos on ceiling fans complete all specified and directed by Engr-in-Charge.

Taking down old universable rusted ceilling fan blades and providing new ceilling fan blades with fixing new screw as apporpriate shape /size suitable for ceilling fan of any make and 1200mm sweep size complete all as specified and directed.

Taking down old universable rusted ceilling fan blades and providing new ceilling fan blades with fixing new screw as apporpriate shape /size suitable for ceilling fan of any make and 1400mm sweep size size complete all as specified and directed.

Taking down old universable rusted exhaust fan blades and providing new exhaust fan blades with fixing new screw as apporpriate shape /size suitable for exhaust fan of any make and 380/450mm size of sweep complete all as specified and directed.

Supply and fixing of stator and rotor assembly including body cell of ceiling fan for size 1200 mm sweep complete including carbon brush, wire, etc all as specified and directed by Engr in Charge.

Painting of ceiling fan/ 1200/1400 mm sweep/exhaut fan 225 to 450 mm sweep complete including fan blade down rod with synthetic enamelled paint of white tint including cleaning and removing dust and dirt and making smooth surface for painting including writing MES No complete all as specified.

Taking out worn out gun metal bush and supply and fix new gun mettal bush for various make of ceilling fan of size 1200 to 1400 mm sweep complete all as specifide and as directed (Make - MSP or eqvt as approved by GE).

Supply and fix bearing for ceiling fan (Bearing No.6201 Z Type).

Supply and fix bearing for ceiling fan (Bearing No.6202 Z Type).

Supply and fix bearing for ceiling fan (Bearing No.6203 Z Type).

Supply and fix bearing for ceiling fan (Bearing No.6204 Z Type).

Taking out defective capacitor and supply and fix new capacitor of 2.5 MFD 230 volts with conector(capacitor holder with nut) including PVC clamps nuts , as approved make for various make of ceilling fan complete all as specified as directed.

Taking out defective capacitor and supply and fix new capacitor of 4 MFDas approved make for various make of exhaust fan complete all as specified as directed.

Taking out defective capacitor and supply and fix new capacitor of 6 MFDas approved make for various make of exhaust fan complete all as specified as directed.

Supply & fixing brushless direct current (BLDC) ceiling fan 1200 mm sweep (ISI Marked), with super enamelled copper wire, white color, Class of insulation "B", 5 Satr rated, ISI marked, rated voltage 230Volt AC, 50 Hz , Rated power 28 Watt (+-) 10%, Rated speed 370 RPM (+-) 10%, power factor 0.9 at 5th speed, Air delivery 218 Cum/min (CMM), service value 7.8 cum/min/W, operating temp 75 degree max, 3 nos aluminium blades, Double ball bearing, speed control through regulator, Low voltage starting i.e. 140 Volt minmum, Insulation resistance more than 2 mega ohm and leakage current 210 MICRO Amps Max includung connection rod as per existing length, writing MES Nos on ceiling fans complete all specified and directed by Engr-in-Charge.

Supply, fixing in replacement and connecting up flexible copper cable twin core of 0.75 Sqmm.

Taking out rusted /defective down rod and supply and fix new down Rod of midium grade GI tubing 15mm bore having hole and threading at ends as per site requirement complete specified all as directed.

Removing broken/cracked Canopy of any make and type and supply and fix new canopy of existing make and size all as directed.

S&F in replacement of Rubber real for fans clamp complete all as per sample and approved y Engr in Charge.

Supply and fixing exhaust fan, steel body, heavy duty, AC single phase, 230 volts of size 450mm sweep with blades and frame and louvers complete all as specifed and directed by Engineer-in-Charge.

Supply & fixing brushless direct current (BLDC) ceiling fan 1400 mm sweep (ISI Marked), with super enamelled copper wire, white color, Class of insulation "B", 5 Satr rated, ISI marked, rated voltage 230Volt AC, 50 Hz , Rated power 30Watt (+-) 10%, Rated speed 350 RPM (+-) 10%, power factor 0.9 at 5th speed, Air delivery 245 Cum/min (CMM), operating temp 75 degree max, 3 nos aluminium blades and thickness 1.1 mm (after painting), Double ball bearing, speed control thorugh regualator, Low voltage starting i.e. 185 Volt minmum, Insulation resistance more than 2 mega ohm and lekage current 210 MICRO Amps Max includung connection rod as per existing length, writing MES Nos on ceiling fans complete all specified and directed by Engr-in-Charge.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 3,33,067.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

metro electrical services (BID ID -3277038)

Shree Sai Samarth Enterprises (BID ID -3278258)

LOKMANYA ENTERPRISES (BID ID -3281272)