Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹10.2 LAdmitted-Finance | -25.69% | ₹10.2 L | L1 | Admitted-Finance |
| 2 | L2₹10.6 L+₹33,908.91 (3.31%)Admitted-Finance | -23.23% | ₹10.6 L+₹33,908.91 (3.31%) | L2 | Admitted-Finance |
| 3 | L3₹10.7 L+₹41,214.49 (4.02%)Admitted-Finance | -22.70% | ₹10.7 L+₹41,214.49 (4.02%) | L3 | Admitted-Finance |
| 4 | L4₹11.3 L+₹1.1 L (10.3%)Admitted-Finance | -18.00% | ₹11.3 L+₹1.1 L (10.3%) | L4 | Admitted-Finance |
| 5 | L5₹11.5 L+₹1.2 L (11.9%)Admitted-Finance | -16.83% | ₹11.5 L+₹1.2 L (11.9%) | L5 | Admitted-Finance |
Tender Value
₹13.8 L
EMD Value
₹27,560
Closing Date
26 Aug 2026, 3:00 pmClosed
HE Civil-II, PGIMER, Chandigarh
Office of H.E. Civil-2, PGIMER, Chandigarh
Providing and fixing of Signages and PVC Doors at various locations in APC, Replacement of Blinds in guest house at 6 D and Aluminum Partition in Room no. 5405 in APC, PGIMER, Chandigarh
2026_PGIME_921254_1
PGI/Engg/Civil-II/2026/297
Open Tender
Civil Works
Percentage
60 days
APC at PGIMER
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹27,560
Yes
15 Sept 2026
8 Aug 2026
28 Aug 2026
8 Aug 2026
26 Aug 2026
8 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | |||||
| 1.1 | For fixed portion | - | - | - | - |
| 1.2 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | 54 | kg | 530.9 | ₹28,668.6 |
| 2Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. | |||||
| 2.1 | Pre-laminated particle board with decorative lamination on both sides | 1.8 | sqm. | 1,115.4 | ₹2,007.72 |
| 3Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): | |||||
| 3.1 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | 3.9 | sqm. | 1,505.25 | ₹5,870.47 |
| 4 | Providing and fixing of wall mounted/Ceiling hung signage made up of 3 mm thick acrylic sheet with lazer cut letters in any approved colour and hung on ceiling with cain and fasteners/fixtures as per site requirement | 39.45 | sqm. | 10,713.35 | ₹4,22,641.66 |
| 5Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20 mm x 40 mm for styles as well as top, bottom & lock rail. M.S. frame shall have a coat of steel primers of approved make and manufacture. The inside panel shall consist of 20 mm thick multi chamber hollow PVC section of 1 mm wall thickness bonded using solvent cement / Cynoacrylate adhesive with 5 mm thick (±0.5 mm ) plain PVC sheet of density 600 kg / cum manufactured by an ISO 9000 certified company, on both side of inside panel. All the four edge of the panel to be sealed with lipping of 10mm thick & 20 mm wide PVC sheet batten (made by sticking 2 nos. rigid foam PVC sheet of 5 mm (±0.5 mm ) thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain moulded PVC sheet of door 20 mm thick (5mm x 4 nos.) PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos. S.S. butt hinges of size 100 x 25 x 2 mm & 50 mm long steel screws drilled suitable to pass through both the walls of the M.S. tube. Other hardwares should be fixed by 25 x 8 mm size steel screws etc. complete in all respect as per direction of Engineer Incharge. | |||||
| 5.1 | 30 mm thick prelaminated PVC door | 10.8 | sqm. | 4,118.5 | ₹44,479.8 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.62 MB
BOQ_968142.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .