Construction of Men and Women Barracks building (50 Nos. Bed) with development works at Cuddalore AR in Cuddalore District.

Amount

E0001) Earth work excavation for foundation in all soils (including refilling) a) 0 to 2 mt.

E0005) Earth work excavation for Open foundation (excluding refilling) a) 0 to 2 mt.

RE0006) Providing Pre-Constructional Antitermite treatment

F0040) Supplying and filling in foundation and basement with filling crushed stone sand

F0006) Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement

F0007) Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement

F0026) Filling in foundation and basement and other similar works with Excavated earth

F0013) Supply and filling in foundation and basement with gravel

CSMP0002) Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly

CSMP0003) Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly) (including Mortar Plasticizer (Liquid) at 200ml per bag) using 20mm gauge hard broken stone jelly

CSMP0004) Plain cement concrete 1:8:16 (One of cement, eight of crushed stone sand and sixteen of broken brick jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and other similar works using 20mm gauge broken Brick Jelly

CS0012) Providing Cuddappah slab of 20mm thick, finishing with two sides for cupboard, ward-robes, shelves , kitchen platform slabs, sink and other similar works including finishing and fixing in position complying with relevant Standard specifications etc., complete in the following floors (Measurement will be taken including bearing also) as directed by the departmental officers (Quality of Cuddappah slab shall be got approved by the Executive Engineer before fixing. I. 20mm thick a) In Ground Floor

b) In First Floor

CS0015) Providing Cuddappah slab of 40mm thick, finishing with two sides for cupboard, ward-robes, shelves, kitchen platform slabs, sink and other similar works including finishing and fixing in position complying with relevant Standard specifications etc., complete in the following floors (Measurement will be taken including bearing also) as directed by the departmental officers (Quality of Cuddappah slab shall be got approved from the Executive Engineer before fixing. I. 40mm thick a) In Ground Floor

b) In First Floor

CS0009) Providing precast concrete slab for cupboard ward robes shelves, cover slab for chambers, Baffle walls side slabs of boxing around windows and other similar works in Standardised concrete mix M30 for the following thickness II. 40mm thick a) In Foundation and Basement

C0067) Providing and laying in position, Standardised Concrete Mix M-30 Grade in a accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for the all RCC items of works a) In Foundation and Basement

b) In Ground Floor

c) In First Floor

d) In Second Floor

C0057) Supplying and fixing Monolithic RCC door frames of size 100x75mm with one edge groove size t x 20 mm (t represents the shutter thickness) using standardised Concrete mix M30 etc., all complete b. 1000 x 2100 mm

CSMP0001) Supplying and fixing of fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6 (one of cement,three of crushed stone sand and six of 20mm hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag)

BMP0011) Brick work in cement mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in foundation and basement

BMP0012) Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a) In Stilt / Ground Floor

b) In First Floor

c) In Second Floor

BMP0013) Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Foundation and basement

b) In Stilt / Ground Floor

c) In First Floor

BMP0014) Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Stilt / Ground floor

b) In First Floor

c) In Second Floor

BMP0010) Brick partition walls 50mm thick using kiln burnt country bricks of size 8¾”x4¼”x2” (22x11x5cm) in cement mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) for super structure in the following floors a. In Ground floor

b) In First Floor

FL0115) Supplying and laying of Rubber molded hydraulic pressed Paver blocks following thick using stone dust with required design & color including cost, conveyance of paver block and labour charges for laying with proper slope and gradient etc. complete and as directed by departmental officer (The brand, quality & color should be got approved from the Executive Engineer before use) b. 83mm thick Paver block

FLMP0001) Flooring with a bed of CC 1:5:10 (one of cement, five of crushed stone sand and ten of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) using 40mm size hard broken stone jelly

FLMP0002) Plastering the top of flooring in CM 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FL0024) Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring (No Sand)

FL0025) Weathering Course with concrete broken brick jelly 20mm gauge

FL0154) Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with epoxy coat

FLMP0004) Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag,) 12mm thick mixed with Water proofing compound at 2%

FLMP0005) Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

FLMP0006) Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0010) Supplying and fixing of Ivory colour Vitrified Tiles of size 59.5x59.5cmx10mm for flooring and other similar works (Best approved quality, colour and shade and the same shall be got approved from the Executive Engineer before use) in cement mortar 1:3 (one of cement and three of curshed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0011) Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3 (One of Cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FW0004) Providing Form work and centering for reinforced cement concrete works a) For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

c) For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

d) For Vertical wall

PLMP0001) Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PLMP0002) Plastering with CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PLMP0003) Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

PLMP0004) Plastering in CM 1:3 (one of cement and three of crushed stone sand (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm tk. mixed with water proof compound at 2%

PLMP0005) Plastering in CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick for border finish in all floors a) 150mm wide border

b) 75mm wide border

c) 50mm wide border

PA0022) Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint in addition to one coat of Primer

PA0026) Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats

PA0027) Providing wooden (melamine) polish for new wood

PA0032) Supplying and applying of full putty one coat with aproved make wall putty for smooth finishing the new cement plastered walls

PA0037.a) Painting the ceiling with one coat Plastic Emulsion paint incl. Primer

PA0037) Painting the New walls with two coats of approved best ready mixed plastic emulsion paint for inner walls

PA0042) Painting the New walls with two coats of approved best ready mixed exterior emulsion paint outer walls in addition to one coat of approved primer coat

J0001) Supplying and fixing of Teak wood wrought and put up a) Teak wood over 2m and below 3m length

b) Teak wood below 2 m length

J0021) Supply and fixing of best approved superior variety magnetic door catches

J0029) Supplying of Mild Steel hold fasts horizontally twisted of size 230x40x4mm

JV0022) Supply and fixing of UPVC (Un plasticized polyvinyl chloride) Louvered ventilators

JW0042) Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open)

JW0044) Supply and fixing of UPVC Sliding Window (Two track)

JD0098) Supplying and fixing of best Indian Teak wood paneled door of Double leaves shutters in position using 2Nos of 75mmx37.5mm styles and 3 Nos. of 150x37.5mm rails (Top, Bottom and Lock rail) and 18.75mm thick planks for panels including cost and labour for fixing the Brass furniture fittings such as 2 nos of 6" door handle with brass screws, 6 nos of 5" Butt hinges, 4nos 6"x1/2" Tower bolt, 1no 10"x5/8" aldrop, 2nos Nylon bush and 2 nos door stopper of best approved quality shade etc., all complete and as directed by the departmental officers. a) 1800 x 2100mm (Double Leaves)

JD0059) Supplying and fixing of Single leaf Solid core flush door shutters Suitable for Door of size c) 1000 x 2100 mm

JD0095) Supply and Fixing of 25mm (+/- 1mm) thick WPC Decora Door which is extruded as a single core door with Lead-Free compound. The door is designed homogeneously by Smooth Routing and 3D embossed grains on one side. The other side of the door shutter shall be plain matt finish. The door must be completely made by machine, without any post-production fabrication.

GR0001) Supplying and fixing Mild Steel grills as per the design approved

RE0005) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry) of all diameters for reinforcement for all floors including cost of binding wire insulated with PVC, bending tying etc., all complete and as directed by the departmental officers.

RE0009) Applying one coat of Anticorrosive treatment for steel window/ M.S. Grills

RE0011) Applying one coat of anticorrosive treatment on steel reinforcement rods (20 Itrs. of anticorrosive chemical for one mertic tonne of steel reinforcement rods) at site

JD0094) Providing T.W.double leaf shutters for cupboard/ward robes with 9mm thick phenol bonded BWR grade plywood

FLMP0018) Supplying and fixing of pre-cast kerb stone of size 450x300x150mm made in CC 1:3:6 (One of cement, three of crushed stone sand and six of hard broken stone jelly) using 20mm size hard broken stone jelly including Cost of Mortar Plasticizer (Liquid) at 200ml per bag

WS0003) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe (UPVC Special clamp)

WS0007.b) Supplying and fixing of Pipe for Hot water line (Fully Concealed in walls) b. 20mm dia UPVC pipe

WS0033) Supplying and fixing of half turn C.P Long body Tap of 15mm dia

WS0036) Supplying and fixing of half turn C.P short body Tap of 15mm dia

WS0006) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness a) 32mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

b) 25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

WS0276) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness not less than the specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of suitable UPVC specials (Fully concealed in walls) a) 20mm ASTM D schedule 40 threaded PVC pipe with necessary UPVC specials

SA0002) Supplying and fixing of porcelin wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories

SA0036) Supplying and fixing of PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl a) 110mm dia PVC SWR pipe of 3m with required PVC cowl & PVC specials etc.,

SAMP0006) Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick brick jelly concrete in CC 1:8:16 (one of cement, eight of crushed stone sand and sixteen of broken brick jelly) using 40mm size brick jelly and brick masonry wall 110 mm thick using kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) in cm 1:5 (One of cement and five of crushed stone sand) plastered with CM 1:3 (One of cement and three of crushed stone sand) 12mm thick including Mortar Plasticizer (Liquid) at 200ml per bag etc., complete and as directed by the departmental officers.

SAMP0003) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum of water seal of 50mm confirm to relevant I.S. specifications with its latest amendments including resting on the bed of brick jelly concrete 1:5:10 (One of cement, five of crushed stone sand and ten of 40 mm gauge brick jelly) including Mortar Plasticizer (Liquid) at 200ml per bag etc., complete

SAMP0004) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag) In Ground floor.

SAMP0005) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag) (Other than ground floor)

SA0025) Supplying and fixing EWC superior variety (white) 500mm with 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag)

SA0033) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

SA0035) Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirmed to IS 13952-1992 Type-B for waste water line

SA0048) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110 mm dia UPVC Non Pressure pipe

b) 160 mm dia UPVC Non Pressure pipe

MS0002) Supplying and fixing of 20mm dia aluminium hanger rods

MS0003) Supplying and fixing of Aluminium Towel Rail of 75cm long

MS0006) Supplying and fixing of Aluminium plate with five pin for Coat Stand

MS0007) Providing and fixing iron Chromium plated 8 gauge Picture hook

J0017) Supplying and fixing of 4mm thick pin headed Glass panels

L0001) Supply and planting Avenue Trees

L0004) Supplying and fixing of Triangular shape chicken mesh Tree guard

NL0002) Supplying Fabrication and Erection in position of M.S. scheme name and layout board

MS0009) Supplying and fixing of Bevelled Edge Mirror of approved quality and brand of size 600x450x5.5mm shelf type

EL0003) Wiring with 1.5 sqmm PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark confirming to IS 694/1990 1.1 K.V. grade cable (PVC box Fire retraded box for COASTAL) a) Light point with ceiling rose

b) Light point with bakelite battern type holder

c) Point wiring for calling bell/buzzer with push type switch with required Buzzer.

EL0011) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Fan Point (PVC box Fire retraded box for COASTAL)

EL0019) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Stair case light point (PVC box Fire retraded box for COASTAL)

EL0027) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable for 5 Amps 5 Pin plug Socket Point @ Switch Board Itself (PVC box Fire retraded box for COASTAL)

EL0035) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 Amps 5 pin Plug Socket Point at Convenient Places (PVC box Fire retraded box for COASTAL)

EL0042) Supplying and fixing 15 Amps 3 pin plug type socket with switch (PVC box Fire retraded box for COASTAL)

EL0214) Earthing and Earth connections: Providing Earthing Station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0m of 20mm B-class GI pipe including all requirements

EL0074) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

EL0075) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator

EL0078) Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete a) 48"" Electric fan 1200mm sweep

EL0085) Supplying and fixing of 225mm dia sweep AC exhaust fan of approved ISI quality

EL0070) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite pattern holder of best approved variety and as directed by the departmental officers. (The materials should be got approved from the Executive Engineer before use) a. 9 watts LED bulb

b. 12 watts LED bulb

EL0047) Supplying and fixing of 4'18 watts crystal LED tube light and fixing the tube light fittings

EL0045) Supplying and fixing of water tight Bulk head fitting suitable for 12w LED bulb with guard

EL0100) Supplying and fixing of 25 watts LED bulb with Street light fittings arrangements

EL0186) Run of main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0190) Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0191) Supply and Run off main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0201) Run off 4 wires of 4 Sq mm. PVC insulated single core multi strand fire retard flexible copper cable with ISI mark conforming to IS: 694/1990. With one run of 7/20GI stay wire (for EB service connection ).

EL0227) Supplying and fixing of 3 Nos.of 63 amps 500 volts grade porcelain fuse unit on suitable teakwood plank varnished to be fixed on the top of pole EB street pole with necessary clamps including cost of all materials etc., all complete and as directed by the departmental officers.

EL0165) Supply and fixing of 63 amps triple pole main switch with fuse and neutral link on a suitable well varnished teak wood board including necessary interconnection and earth connection cost of all materials etc., all complete and as directed by the departmental officers.

EL0237) S & F of 450 x 375 x 20mm thick TW plank

EL0252) Supply and fixing of 20A Flush type Wall Socket, 20A DP MCB and 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

EL0298) Supply and fixing of 32 Amps Electro mechanically operated three phase Earth Leakage Circuit Breaker/Residual Current Circuit Breaker (ELCB/RCCB) Three phase

EL0174) Supplying and laying of 8 SWG GI wire

EL0337) Supplying and delivery of following PVC aluminium armoured LTUG cable h) 3.5 core 50 Sqmm PVC aluminium armoured LTUG cable

EL0342) Supplying and delivery of Brass cable Gland suitable for PVC Aluminium armoured LTUG cable h) 3.5 core 50 Sqmm Brass cable gland

EL0358) Supplying and fixing of cable end termination for following PVC / XLPE LTUG Aluminium armoured cable etc all complete and as directed by the departmental officers. a) 3.5 c x 50 sqmm PVC / XLPE LTUG armoured cable

EL0434) Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with Earth connection only.

WS0107) Supplying and fixing of 32mm dia PVC Tee with end cap

SA0070) Supply and delivery at site and fixing of SFRC manhole cover with frame and locking arrangements a) 300mm x 300mm

b) 600mm x 600mm

SA0155) Supplying and fixing of CP Two Way Bib Cock with Health Faucet approved quality with ISI mark inluding cost of materials, all accessories & labour charges for fixing in position etc., all complete and as directed by the departmental officers.

WS0023) Supplying, laying, fixing and jointing the following UPVC pipes as per ASTM-D-1785 of schedule (Below Ground level) b) 40 mm PVC pipe. 10Kg/cm²

WS0280) Supplying and Delivery of following Dia UPVC Specials of best and approved quality having ISI mark WS0195) 50 mm UPVC Ball valve

WS0280.III.b) 40mm Dia UPVC Union

WS0280.I.b) 40mm Dia UPVC Elbow

WS0280.VI.b) 40mmx32mm dia UPVC reducer

WS0270.a) SS Adopter 40mm dia

WS0021) Supplying and laying of following dia GI pipe "B" Class of best approved quality including cost of all materials with ISI mark, specials and labour charges for cutting, welding, joints and fixing in position etc., all complete as per relevant standered specification and as directed by the departmental officers. [The brand and quality of pipe should be got approved from the EE before use]. (Above GL) a. 50mm dia GI ""B"" Class pipe

WS0018) Supply and fixing of following dia GI/GM Specials of best approved quality, with ISI mark WS0018.V.a) 50mm dia GI Elbow

WS0018.VII.a) 50mm Dia GI Hex Nipple

WS0018.VI.a) 50mm Dia GI Union

WS0018.X.a) 50mm Dia GI Non Return Valve

WS0018.II.b) 50mm dia GI flange set

WS0018.IV.b) 50mm dia GI Tee

WS0150) Labour charges for inserting of Following PVC Casing pipes assembly (With slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., complete a) 150mm dia casing pipes assembly

WS0162) Labour charges for the erection of Submersible pumpset in borewell / openwell including fixing and jointing Submersible cable with proper clamps up to the starter to required depth Upto 5 HP

WS0243) supplying of following dia upvc column pipe for borewell including cost of all materials of best approved superior quality with isi mark etc all complete and as directed by the departmental officers. (the quality of upvc column pipe should be got approved from the executive engineer before use) b) 40 MM DIA UPVC COLUMN PIPE

WS0235) supply and delivery of required dia nylon rope of superior quality for submersible pumpset in borewell and as directed by the departmental officers (the quality of nylon rope should be got approved by the executive engineer before supply)

WS0282) Drilling of borewells of size 4” to 5” dia. in Sedimentary formation using hand boresets including insertion of casing pipes and removal of casing pipes etc., including supplying and packing of pebbles and conveyance of hand Boreset including loading and unloading

WS0283) Drilling of borewells of size 6” to 8” dia. in sedimentary formation using hand boreset including insertion of casing pipe etc., and supplying and packing of pebbles (Conveyance of hand bore set including loading and unloading to be done by the contractor)

WS0277) Supply and delivery of clear water vertical wet type submersible pump conforming to IS 8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+/- 10 %,50 HZ +/-5 % i) 60lpm x 50m

WS0279) Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation. q) 100lpm x 50m

WS0173) Supply and delivery of direct online DOL starter with single phasing preventor with analog ammeter and voltmeter confirming to IS13947, IEC60947-1 with auto restart facility for Pump houses where Panel boards are available suitable KW rating for operationin AC/threePhase/ 50HZ (+/-5%) and415V(+/-10%) including Ammeter, Over load relay, under Voltage release with no Voltcoil, AirBreak contactors suitable for next Standard higher KW rating , dry running preventor and On/Off Push button switches, including the capacitor (the cost of capacitor is to be taken separately).. etc., complete complying with relevant standard specifications and as directed by the departmental officers (The brand and quality of the cable shall be got approved by the Executive Engineer before use). Upto 5 HP

WS0171) Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). a. For 1 HP

EL0380) Supply and erection of 200 Amps capacity floor mounting metering panel board (Cubical type) with bus bar chamber made up of 16 / 14 SWG MS sheet for 3 phase 4 wire system with 25mm x 6mm tin coated copper flats for phases and 25mm x 3mm for neutral cable chamber, switch chamber and with 2 Nos. 25mm x 3mm tinned copper flat for the earth bus on the rear side of the panel board, necessary interconnections by copper flat of suitable sizes, suitable PVC colour sleeves for the interconnecting copper flats / rigid copper wire, earth connections to all switches / bus bar by copper flats of suitable sizes from the earth bus, hylem sheet separation between bus bar and switches, 1 set LED pilot lamps with switches, fuse units, suitable angle iron frame of size 40mm x 40mm x 6mm with painting in two coats of suitable colour over one coat of red oxide and with numbering, superscription of cables sizes, capacity of switches etc all complete complying with relevant standard specifications and as directed by the departmental officers.

EL0324) Supply and fixing of 8 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 No 63 A 4 P MCB as incoming and 24 Nos 6A to 32A SP MCB as outgoing on wall with Earth connection only.

EL0312) Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 No 63 A 4P MCB Isolator as incoming and 18 Nos 6A to 32A SP MCB as outgoing in flush with wall with Earth connection only.

EL0346) Supply and laying of PVC insulated and sheathed following core and sq.mm flat type copper cable confirming to IS 694/1990,cable for submersible motor etc., all complete and as directed by the departmental officers. (The materials should be got approved from the Executive Engineer before use) b) 3 core 2.5 Sqmm flat type copper cable

EL0294) Supply and laying of B class following dia G.I.pipe of best approved quality with ISI mark below G.L for drawl of cable with necessary earth work excavation in all soils and subsoils and refilling the trenchs with excavated earth, consolidation etc., all complete complying with relavent standard specification and as directed by the departmental officer (The brand and quality of GI pipe should be got approved from the EE before use) c) 80 mm dia GI pipe

EL0292) Supplying and delivery of following dia GI Pipe of approved ISI quality including cutting, threading, and jointing, conveying & labour charges for fixing wherever required above the ground level including the cost of teflon tape, special clamps, nails, etc., all complete and as directed by the departmental officers. (The pipe quality & brand should be got approved from the EE before use) c) 80 mm dia GI pipe

WS0018.XIII.b) Supplying and fixing of the 40mm dia MS Borewell clamp set

K.Saravanan (BID ID -1515817)