SPL REPAIR OF 08 X OTHER RANK MD ACCN OF BLDG NO P 105 AT SAFILGUDA POCKET I OF 54 IDSR (AREN) UNDER AGE BR (SOUTH) NO II / AGE EM (SOUTH) OF GE (SOUTH) SECUNDERABAD

Amount

Taking down frames (including grills/wire mesh) with shutters n.exc 1.50 Sqm each (without taking off shutters from the frame) complete all as specified and as directed.

Taking down frames (including grills/wire mesh) with shutters n.exc 1.50 Sqm but n.exc 4.00 Sqm each (without taking off shutters from the frame) complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified and as directed.

M & L for second class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

S&F pressed steel door frame 125x60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plates complete all as specified and as directed. Note: (pcc filling of holloow section measured and paid seprately)

S&F pressed steel door frame 105x60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plates complete all as specified and as directed. Note: (pcc filling of holloow section measured and paid seprately)

M & L PCC typeC-1, 1: 3:6 (20mm graded stone aggt) for cills,hold fast filling of hollow of pressed steel door frame etc complete all as specified and as directed.

S&F 35mm 2nd class hard wood plain framed factory made panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial plywood or 12mm thick veneered particle board with commercial veneering on both faces, size of rail and tile as per IS 1003 (Part-I0 Kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F, 35mm thick, 2nd class hardwood factory made partly panelled and partly glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 complete all as specified and as directed.

S & F 30mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides complete all as specified and as directed

S & F in repair 2nd class hard wood in fillets, square, rectangular in section wrought, secured with nails sectional area n.exc 13 sq cm and n.exc 25 Sq cm complete all as specified and as directed.

S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with MS Square tube complete all as specified and as directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S & F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and as directed.

S & F steel window with side hung shutters incluidng projecting type hinges with steel handle and peg stays with glazing bars, devotailed or welded complete all as specified and as directed.

All as per item No 15 here-in-above, but without glazing bars complete all as specified and as directed.

M & L for framed work such as grills, gratings etc with ends of bars, framed guard bars, ladders etc and similar works conforming to Fe-290 Gde E-165.complete all as specified and as directed.

S & F stainless steel 100mm butt hinges medium weight cold rolled complete all as specified and as directed.

S & F 100mm butt hinges medium weight cold rolled mild steel. complete all as specified and as directed.

S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section. complete all as specified and as directed.

S & F 150mm aluminium anodised handles. complete all as specified and as directed.

S & F in 300mm size aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of seat cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S & F in repairs 300mm size aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of seat cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S & F 100mm aluminium hasp and staple complete all as specified and as directed.

S & F MS hold fases (FI 25X3, 250mm long) conforming to Fe-290, Gde E-165, complete all as specified and as directed.

M & L for PCC 1:3;6, type C1 (using 20 mm graded stone aggregate) as in bed blocks for hold fasts etc including necessary form work complete all as specified and as directed.

S&F 4mm thick plane glass pin head type and glazing with oil putty in square panes. Not exc 0.50 sqm in each pane complete all as specified and as directed.

S & F 4mm thick figured glass pin head type and glazing oil putty in square panes n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and as directed.

S&F in repairs Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm. complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement morytar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed.

Demolition of un reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below & above ground level) complete all as specified and asdirected.

M& L for 25mm thick PCC 1:2;4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in sub base of tiles and surface even and smooth without using extra cement complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8mm thick (Squared/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including laying over 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M & L for Non skid ceramic coloured tiles 7 to 8mm thick (Squared/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed of 15mm thick in CM 1:6. complete all as specified and as directed.

M & L for glazed ceramic coloured tiles in vertical surface 300x200mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete in position laid on over 10mm thick screed in CM 1:3 on wall, complete all as specified and as directed.

M &L granite 20mm thick (of any type) work table robed & polished cooking platforms and like over 15mm thick screed bed or bedding in layer of CM 1;4 for laying floor finishes incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite, and half moulded at one side including dismantling of old stone any type complete all as directed and as specified

Demolition of brick work or stone boulders masonry built in Cement mortar (or) cement lime mortor including all quions, arches, pillars etc complete all as directed and as specified

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radins built in cement mortar 1:6 complete all as directed and as specified

Taking down cement plaster/terrazzo finish on brick/RCC/stone wallsof any description including racking out joints hacking for keys scrubbing down with water etc, complete all as specified and as directed.

M & L rendering 15mm thick on concree or fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as directed and as specified.

M & L rendering 15mm thick on concree or fair faces of brick work in CM 1:4 finished even and smooth without using extra cement complete all as directed and as specified.

M & L for rendering 10mm thick in CM 1:4 rendering on cocrete surface such as ceiling chajjas etc finished evena and smooth (without using extra cement) complete all as specified and as directed.

Demolition of un reinforced cement concrete in any position and any thickness below and above grund level complete all as specified and as directed.

M & L for rendering 10mm thick in CM 1:3 on roof concrete surface while concrete is green including mixing W.P compound @ 3% of total weight of cement including finished the surface smooth and even without using extra cement. complete all as directed and as specified Note:- WPC will be measured and paid separately.

M&L for priming the plastered roof surfaces with bitumenous primer @ 0.30 kg over applying hot bitumen VG-30 1.2kg/Sqm and applying APP based polymeric membrane weighing 3 kg per Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/per sqm) and on primed surface by forced torch application over that applying bitumen base alluminium Paint 0.2 Kg/Sqm complete all as specified and as directed.

M&L 40mm Thick PCC (1:2:4) Type B1 by using 20mm graded stone aggregate as in roof with water proofing compound , where required over slab and necessary form work and finishing the exposed surfaces fair even without using extra cement complete all as specified and as directed. Note:- WPC will be measured and paid separately.

M & L for rendering 15mm thick on concrete or fairfaces of brick work in CM 1:4, finished even and smooth without using extra cement but mixing WPC complete,all as directed and as specified (Note:- WPC measured and paid separately).After plastering the sunken surface, sunken portion to be filled with water and tested for 72 hrs (after required period of curing) to observe leakage/seepages, leakages/seapage if any shall be arrested by pressure grouting and re-tested till leakage/seepages completely stopped. After pointing test, the surface shall be dried and bottom and sides of the sunken slabs shall be treated, priming the plastered surface with bituminous primer conforming to IS-3384 @ 0.3 Kg per Sqm and applying a tack coat of industrial bitumen 85/25 @ 1.2 kg per Sqm over which applying using glass fibre base bituminous felt type II and grade 2 (conforming to IS-7193 1994) and applying one coat of hot blown bitumen of grade 85/25 @ 1.5 Kg per Sqm including 450mm long 25mm dia medum grade GI pipe shall be provided at the lowest in case of leakage. The joints in CI/GI/PVc pipes, Nahani traps, WC and P/S trap connection shall be made leak proof. The gap around the pipes in walls/beams shall be properly filled and sealed with water proof joints fillers complete all as specified and directed

M & L for PCC 1:3:6 type B0, (12.5mm graded stone aggregate) as in levelling course including weathering slightly rounded or chamfered angles and throating as directed complete all as specified and as directed.

S & F 15mm bore tubes medium grade galvanised with all fitting and fixed concealed type complete to walls and ceilings or laid in floors 15mm bore including taking up or down steel tubing and connections, including cleaning for refixing (or) removed to store. complete all as specified and as directed

All as per item No. 50 here-in- above, but 20mm bore. complete all as directed and as specified

S & F in repair bib tap 15mm bore, fancy type, chromium plated, cast copper alloywith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repairs 15mm bore stop valves fancy type chromium plated screwed both ends for iron pipe for unions and fixed with long shank and cup (concealed type) complete all as directed and as specified

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as specified and directed.

S&F in repair 600 mm long PVC connections, 15 mm dia with PTMT nuts, complete all as specified and as directed.

S & F in repair chromium plated 125mm swivel shower complete all as specified and as directed.

S& F in repairs water closet (squatting pan) complete including provision of lime concrete bedding 'Orissa' pattern size 508 x 440mm white, integral foot rests including flushing cistern and flush pipe, PVC connection of size 450mm complete all as specified and as directed

S & F in repairs vitreous china wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends for brackets, fitting with pillar tap 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or with out letter 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and waste fittings 32mm includkng waste pipe, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S & F in repair tubular towel rail brass chromium plated 20mm dia D type 60 cm, between the flangers complete all as specified and directed.

S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including waste coupling and waste pipe and including bedding in cement mortar to dwarf wall or including fixing cantillever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

S & F in repair kitchen plate rack size (24x36x10')made of stainless steel, complete all as directed and as specified

Demantling of existing tank of any description and S & F 500 ltrs rotational moulded polythylene water storage tanks, cylindrical vertical with closet top hoisted and fixed in position all as specified in SSR Part-I including 20mm dia PVC high pressure float valve complete all as specified and as directed.

S & F in repair 75mm dia, PVC (SWR) floor trap, plain with grating and jointing to waste pipe with solvent cement and fixed in PCC 1:2:4, type B1, complete all as specified and as directed.

S & F in repair 110mm aid PVC (SWR) WC connector with lip ring complete all as specified and as directed.

S & F in repair 110mm aid PVC (SWR) WC connector bend type complete all as specified and as directed.

S & F in repair 75mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S & F in repair 110mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S & F in repair 75mm bore PVC (SWR) branch piece with access door, single 'Y'/'T' equal or un-equal complete all as specified and as directed.

S & F in repair 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S & F in repair 75mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S & F in repair 110mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

M & L for 75mm thick PCC 1:3:6 type C1, (20mm graded stone aggregate) as in plinth protection laid in panels including finished the surfaces smooth and even without using extra cement all as directed and as specified.

M&L for Preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and as directed.

M&L for Preparatioin of old wooden surfaces of any description over 10CM width or girth and applying one coats of synthetic enamel paint over a coat pink primer complete all as specified and as directed.

M&L for Preparatioin of new steel surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and as directed.

M & L for applying three coats of white wash on wall including preparation of new plastered surfaces complete all as specified and as directed.

M & L for applying three coats of white wash on ceiling including preparation of old plastered surfaces complete all as specified and as directed.

M & L for applying one coat of white wash on ceiling including preparation of old decorated surfaces complee all as specified and as directed.

M & L for applying two coat of distemper oil emulsion on walls over a coat of primer over 3mm thick Birla wall care putty including preparation old wall surfaces complete all as specified and directed.

M & L for complete removal existing treatment and applying two coat of distemper oil emulsion on walls over a coat of primer over 3mm thick Birla wall care putty including preparation new wall surfaces complete all as specified and directed.

M & L for two coats of cement base paint over a coat of primer including preparation of newly plastered surfaces of wall complete all as specified and directed.

M & L for complete removal of existing treatment and applying two coats of cement base paint over a coat of primer including preparation of old plaster surfaces of walls, complete all as specified and directed.

S & F in repair fancty type power coated 20mm dia curtain rod with fancy type bracket fixed on wall complete all as specified and as directed.

S & F 18/19mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choke laminated and other side balancing white lamination fixed with screwed and beading complete all as specified and directed.

M & L plain fillets square, rectangular in section sawn secured with nails or brads 2nd class soft wood sectional area n.xc 3 sq cm each complete all as specified and as directed.

M&L 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate laid in panels surface finish even and smooth without using extra cement as in plinth protection complete all as specified and as directed.

M&L for PCC 1:4:8 typeD2 (Using 40mm graded crushed stone aggregate) 100mm thick as in sub base floor laid in panels and finished top even and fair without using extra cement complete all as specified and as directed.

M & L for rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry with grey cement and pigments in floors over a15mm thick screed bed in CM 1:4. complete all as specified and directed.

M & L mirror polished Machine cut kota stone slab flooring 20 -25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 20mm screed in CM 1:4 complete all as specified and as directed.

M & L mirror polished Machine cut kota stone slab as in skirting 20 -25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 20mm screed in CM 1:3 complete all as specified and as directed.

Rounding to edges of kota stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5m in depth for foundation on manholes etc, and area n.exc 10 Sqm on plan and getting out in hard/dense soil. complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar 100mm dia. complete all as specified and as directed.

All as per item No. 94 here-in-above but 150mm dia pipe complete all as specified and as directed.

M & L concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 100mm dia pipe. complete all as specified and as directed.

All as per item No. 96 here-in- above but 150mm dia drain pipe complete all as specified and as directed.

M & L for SWG drain pipes grade 'A' of 100mm internal dia laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed.

All as per item No. 98 above but 150mm dia. complete all as specified and as directed.

S & F for PVC (SWR) gully trap of 125/110mm dia set and jointing with solvent cement complete all as specified and directed.

Returning , filling in soil including spreeding, leveling, watering and well ramming in layers not exceeding 25cm complete all as specifed and as dirtected.

Removing of excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above starting point complete all as specifed and as directed

M & L for taking down copper/aluminium point wiring (light, fan, socket, power, security lights or bulkhead) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Taking down ceiling/exhaust fans dismantling blades complete and deposited to MES yard complete all as specified and as directed

Taking down existing unserviceable Distribution boards / AC board with MCB's any size and any type complete all as specified and as directed

Taking down existing submain wiring of any size or any type complete all as specified and as directed .

Taking down existing earthing with GI Wire/Strip complete all as specified and as directed .

Material and labour for concealed point wiring complete all as specified with 1100 Volts grade 1.5 Sqmm PVC insulated FR-LS unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC rigid conduit medium grade of size minimum 20 mm with all accessories concealed in wall / ceiling including continous earth wire 1.5 Sqmm PVC insulated FR-LS unsheathed 1100 Volts multistranded copper conductor connected to common earth and earth dolly including modular metal flush boxes concealed in walls and modular white plate covers with frame for mounting of modular switches/sockets etc for one ceiling /exhaust fan complete including making good of disturbed surfaces of wall / ceiling / floor all complete as specified and directed . (a) One light point/fan point controllled by one switch complete all as specified and as directed .

(b) One three pin switch socket 6 Amps outlet on independent board complete all as specified and as directed .

(c) One three pin switch socket 6 Amps outlet on same board. complete all as specified and as directed .

(d) One light point controlled by two nos of two way switches. complete all as specified and as directed .

(e) One bell point controlled by one bell push. complete all as specified and as directed .

All as per item No 108 here in before but with cable 2.5 sqmm multi stranded copper FR-LS wire , 1100 Volts grade, unsheathed for one 3 pin socket out let 15 amps on independent board including continuous earth wire PVC insulated 2.5 sqmm copper stranded conductor FR-LSH, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified and directed

All as per item No 108 here in before but with cable 4 sqmm multi stranded copper FR-LSH wire , 1100 Volts grade, unsheathed for one 3 pin socket out let 15 amps on independent board including continuous earth wire PVC insulated 4 sqmm copper stranded conductor FR-LSH, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified and as directed .

Supply and fix Modular switch 1 way 6A , 1-module complete all as specified and directed

Supply and fix Modular switch 1 way 16A with indicator, 1-module complete all as specified and directed

Supply and fix Modular socket, shuttered type, 6A - 3 pin 2 -module complete all as specified and directed

Supply and fix Modular socket, shuttered type, 6/16A - combined 2-module complete all as specified and directed

Supply and fix Modular switch 2 way 6A,1 module complete all as specified and directed

Supply and fix Modular Bell push 6A 1 module complete all as specified and directed

Supply and fix Bell, Ding Dong AC. 230 volts, single pole complete all as specified and directed

S & F 3 pin, 6 A, 250 V ceiling rose having terminal capacity 3 X 1.5 mm² IP 20 protection complete all as specified and directed

Supply and fixing power module 240 V with 20 A MCB SP complete 4 module metal flush box cover plate starter plug & socket complete all as specified and directed

S & F TV CO-Axial socket outlet fixed to wall on hylem sheet complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed

Supply and fix exhaust fan made of sturdy Engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm sweep complete all as specified and directed

Supply and fix exhaust fan, metal body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers complete including making suitable size hole in wall for fixing of fan complete all as specified and directed

S & F 20 W surface / wall mounted LED batten light fitting input voltage range 140- 270 V, input frequency 50- 60 Hz, ratedlife 50000 Burning hours including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed

All as per Item No. 129 here-in-above, but 10 W complete all as specified and directed

S & F LED light fitting 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable IP 65 out door type metal body of suitable size complete all as specified and as directed .

Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with wall mounting bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and as directed

Supply & Fix Electric water heater, storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 Ltr, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and as directed

S&F of sheet metal enclosure TPN DBs with 200 Amps rated bus bar of 4 way 415 volts with blank plate complete with double door complete all as specified and directed

S & F single pole & neutral, double door, metallic distribution board 8 ways conforming to IEC 61439-3, suitable for flush / surface mounting with provision for DP MCB as incomer and SP MCBs as outgoing, complete all as specified and directed

S&F of MCB SP 6 to 32 Amps 'C' series complete all specified and directed

S&F of MCB, single pole, 40 Amps, 240 Volts, connecting with copper lugs complete all as specified and directed .

S&F of MCB three phase and neutral (TPN), 125 Amps, 415 Volts, connecting with lugs, complete all as specified and directed .

S&F of MCB single phase and neutral (SPN), 40 Amps, 230 Volts, connecting with lugs, complete all as specified and directed .

M & L for submain wiring using 3 runs of 6 Sq mm 1100 V grade single core FR-LSH flexible cable conforming to IS 694: 2010, having multi-drawn thin strands of electrolytic copper conductors and insulation for phase, neutral and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in medium grade PVC recessed conduits, conforming to IS 9537 (Part- 3): 1983, of size not less than 25 mm NB, including making good of disturbed surfaces of wall / ceiling / floor all complete as specified and directed

Material and Labour for Earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less' than 1.5meters below normal ground level, earth plate connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES SSR-2009 (part I Specifications) connected to earth test point all as specified or indicated including testing on completion, including necessary excavation and earth work in any type of soil and adequate quantity of common salt & charcoal for alternate layer around the earth plate, including PCC (1:2:4) pit and 10mm thick C.I. cover with arrangement of hinge to 40x40x6mm C.I. angle iron frame, including 20mm dia G.I. pipe for watering purpose with the arrangement of funel and wire mess, including GI pipe of 15 dia for earth lead protection complete all as specified and as directed.

M&L for earth continuity conductor 4 Sq.mm dia GI or steel wire complete all as specified and as directed .

M&L for cutting of wall in required shape using machine cutting only and making opening,at any height, fixing of suitable premoulded block of required suitable for mounting of exhaust fan including wire mesh and making good the disturbed surfaces,plastering,matching with existing colour along with hole size matching with existing colour and clearing all debris and making the work area clean all as specified and directed .Note:The quoted rate includes for all/any number of openings required at any place for proper ventilation of the site.

Supply and Fix PVC sleeve for fixing exhaust fan on the wall all as specified and directed

M&L for steel water tubing medium grade 15 mm dia including all fittings laid on wall all as specified and directed

Supply and fix Bib tap 15mm dia complete all as specified and directed

Supply and fix ball/stop/gate valve 15mm dia complete all as specified and directed

S&F rgid PVC conduit of dia 20 mm dia complete all as specified and directed

K LAKSHMAN SINGH AND CO (BID ID -3304754)

RAGHAVENDRA CONSTRUCTIONS (BID ID -3313470)

SAI RUPA CONSTRUCTIONS (BID ID -3308431)

Squad 7 Projects and Services Pvt Ltd (BID ID -3305129)