MLACDS PONGALUR 2025-26

Amount

CONSTRUCTION OF PASSANGER WAITING SHED AT PONGALUR H/O PONGALUR

Earthwork excavation and depositing on bank in all classes of hard soils as per SS 20B.

Cement concrete mix 1:4:8 using 40mm gauge hand broken granite stone jelly for Foundation including watering wherever necessary and laid in layers not more than 15mm thick ,compacting etc.completecomplying with Standard specification and as directed.

Supplying and erecting steel centering for plane surfaces in foundation and basement for staircase steps column footings plinth beam grade beam etc.,

Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc, complete as per TNDSS NO: 28 & VI (52) VI (SSA) VII standard specifications as directed by Engineer incharge

Collection supply and filling of well gravel filling approved quarry including cost and Conveyance of all materials to site and all labour charges for filling etc., Complete.

Paving the floor with pre-polished concrete. (anti skid tiles) of 20mm thick of approved spl quality and set in Cement Mortar 1:3 (1 of cement and 3 of sand) 20mm. Thick using river sand and pointing with colour cement using at the rate of 0.40 kg/M2 and mixing with colour pigment at the rate of 0.3 Kg/M2 including finishing complete with Standard Specification and as directed by the Departmental Officers etc.,

Dadooing of walls with glazed tiles of size 15 cm x15cm x 6mm finished thickness with c.m 1:2-and polished with same color cement including all cost and convene of all materials etc..complet

Supplying and fixing of MS. "L"ANGLES of approved design fortruss using necessary mild sthel flats for Inner and outermembers which should be fixed to "truss" Inclusive of priming coat of best approved quality red oxide primer etc, complete complying with standard specifications.

Wiring with 2xx1.5 sqmm (22/0.3) PVC insulated unsheathed CU.Conductor of 1100V grade in suitable PVC rigid pipe conceled in wall and coiling with PVC accessaries in flush with wall with 3mm thick hylum sheet cover with TW switch box suitable color for PVC concealed Light/Fanpoint/ for (electronic regulator) (S Point per coll)(SD-24).

supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting (SD 526)

supply and fixing of 1400 mm 56" sweep ac celing fan completed with stepped electronic 300 watts regulator with the existing down (SD.No 113)

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding. conveyance, welding charges, electrical charges, etc. complete(SOR-2023-2024,PG.NO: 62

13 Providing and fixing of Aluminium Composite Pane I(ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical ant hortzontals out of specially designed extruded sections withstand wind pressure of 100 Kg/sqm and fabricated feed at all level elevation and heights. The extruded section cutting and fising required space extruded section shall be of 6063 and alloy of BSH 9 confirming Tis-63400 rate shall included to fis the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22043 & 22739 (19) grade conforming to B5 4174 (or) 15 8147. Rate shall included 4mm thick ACP sheet (0.25 35 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be flied with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer (SOR-2023-2024,PG.NO: 63)

Supply, Delivery and fixing of best approved quality of corrugated Galvanised Sheet with 0.80 mm thick gifirm to IS code with Bolt nuts, Bitumen Washer including cost and conveyance of all materials and labour charges etc. complete as per standard specifications.

Supplying and Fixing of Aluminium Qye Cast Letters of approved size and eslour. The colour treatment process is achieved with MRF colous.coat and their the processed coloured layer is set into the kiln for the heat treatment process for the following sizes (SOR-2023-2024,PG.NO: 72 873

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Varun Enterprises (BID ID -1558574)